ML17082A637
| ML17082A637 | |
| Person / Time | |
|---|---|
| Site: | LaSalle  |
| Issue date: | 11/16/2016 |
| From: | Chuck Zoia NRC/RGN-III/DRS/OLB |
| To: | Exelon Generation Co |
| Shared Package | |
| ML15274A401 | List: |
| References | |
| ES-301-5 | |
| Download: ML17082A637 (8) | |
Text
ES-301 Transient and Event Checklist Form ES-301-5 CREW 1 Facility: LaSalle Date of Exam: 10/17/16 Operating Test Number: NRC 15-1 A
P P
L I
C A
N T
E V
E N
T T
Y P
E Scenarios 1
2 3
T O
T A
L M
I N
I M
U M(*)
CREW POSITION CREW POSITION CREW POSITION CREW POSITION S
R O
A T
C B
O P
S R
O A
T C
B O
P S
R O
A T
C B
O P
S R
O A
T C
B O
P R
I U
RO SRO-I (1)
SRO-U RX 2
4 2
1 1
0 NOR 1
1 2
1 1
1 I/C 4 5 6 8 10 7 9 2 3 9
4 4
2 MAJ 9 11 8
6 8 5
2 2
1 TS 3 7 2
0 2
2 RO SRO-I (2)
SRO-U RX 2
4 4
3 1
1 0
NOR 1
1 2
1 1
1 I/C 4 8 3 6 7 9 2 3 5 7 10 4 4
2 MAJ 9 11 8
6 8 5
2 2
1 TS 2 5 2
0 2
2 RO (1)
SRO-I SRO-U RX 4
1 1
1 0
NOR 1
1 2
1 1
1 I/C 5 6 3 6 5 7 6
4 4
2 MAJ 9 11 8
6 8 5
2 2
1 TS 0
0 2
2 RO SRO-I SRO-U RX 1
1 0
NOR 1
1 1
I/C 4
4 2
MAJ 2
2 1
TS 0
2 2
Instructions:
- 1.
Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2.
Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis.
- 3.
Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4.
For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
ES-301, Page 26 of 27
ES-301 Transient and Event Checklist Form ES-301-5 CREW 2 Facility: LaSalle Date of Exam: 10/17/16 Operating Test Number: NRC 15-1 A
P P
L I
C A
N T
E V
E N
T T
Y P
E Scenarios 1
2 3
T O
T A
L M
I N
I M
U M(*)
CREW POSITION CREW POSITION CREW POSITION CREW POSITION S
R O
A T
C B
O P
S R
O A
T C
B O
P S
R O
A T
C B
O P
S R
O A
T C
B O
P R
I U
RO SRO-I (5)
SRO-U RX 2
4 2
1 1
0 NOR 1
1 2
1 1
1 I/C 4 5 6 8 10 7 9 2 3 9
4 4
2 MAJ 9 11 8
6 8 5
2 2
1 TS 3 7 2
0 2
2 RO SRO-I (4)
SRO-U RX 2
4 4
3 1
1 0
NOR 1
1 2
1 1
1 I/C 4 8 3 6 7 9 2 3 5 7 10 4 4
2 MAJ 9 11 8
6 8 5
2 2
1 TS 2 5 2
0 2
2 RO (4)
SRO-I SRO-U RX 4
1 1
1 0
NOR 1
1 2
1 1
1 I/C 5 6 3 6 5 7 6
4 4
2 MAJ 9 11 8
6 8 5
2 2
1 TS 0
0 2
2 RO SRO-I SRO-U RX 1
1 0
NOR 1
1 1
I/C 4
4 2
MAJ 2
2 1
TS 0
2 2
Instructions:
- 1.
Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2.
Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis.
- 3.
Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4.
For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
ES-301, Page 26 of 27
ES-301 Transient and Event Checklist Form ES-301-5 CREW 3 Facility: LaSalle Date of Exam: 10/17/16 Operating Test Number: NRC 15-1 A
P P
L I
C A
N T
E V
E N
T T
Y P
E Scenarios 1
2 3
T O
T A
L M
I N
I M
U M(*)
CREW POSITION CREW POSITION CREW POSITION CREW POSITION S
R O
A T
C B
O P
S R
O A
T C
B O
P S
R O
A T
C B
O P
S R
O A
T C
B O
P R
I U
RO SRO-I (3)
SRO-U RX 2
4 4
3 1
1 0
NOR 1
1 2
1 1
1 I/C 4 5 6 8 10 3 6 7 9 5 7 11 4 4
2 MAJ 9 11 8
6 8 5
2 2
1 TS 3 7 2 5 4
0 2
2 RO (3)
SRO-I SRO-U RX 2
1 1
1 0
NOR 1
1 1
1 1
I/C 4 8 3 6 4
4 4
2 MAJ 9 11 8
3 2
2 1
TS 0
0 2
2 RO (2)
SRO-I SRO-U RX 4
1 1
1 0
NOR 1
1 2
1 1
1 I/C 5 6 7 9 2 3 6
4 4
2 MAJ 9 11 8
6 8 5
2 2
1 TS 0
0 2
2 RO SRO-I SRO-U RX 1
1 0
NOR 1
1 1
I/C 4
4 2
MAJ 2
2 1
TS 0
2 2
Instructions:
- 1.
Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2.
Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis.
- 3.
Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4.
For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
ES-301, Page 26 of 27
ES-301 Transient and Event Checklist Form ES-301-5 CREW 4 Facility: LaSalle Date of Exam: 10/17/16 Operating Test Number: NRC 15-1 A
P P
L I
C A
N T
E V
E N
T T
Y P
E Scenarios 1
2 4
T O
T A
L M
I N
I M
U M(*)
CREW POSITION CREW POSITION CREW POSITION CREW POSITION S
R O
A T
C B
O P
S R
O A
T C
B O
P S
R O
A T
C B
O P
S R
O A
T C
B O
P R
I U
RO SRO-I (6)
SRO-U RX 2
4 2
1 1
0 NOR 1
1 2
1 1
1 I/C 4 5 6 8 10 7 9 3 9 9
4 4
2 MAJ 9 11 8
7 8 5
2 2
1 TS 3 7 2
0 2
2 RO SRO-I (7)
SRO-U RX 2
4 2
3 1
1 0
NOR 1
1 2
1 1
1 I/C 4 8 3 6 7 9 3 4 5 9 10 4 4
2 MAJ 9 11 8
7 8 5
2 2
1 TS 2 5 6
3 0
2 2
RO (5)
SRO-I SRO-U RX 2
1 1
1 0
NOR 1
1 2
1 1
1 I/C 5 6 3 6 4 5 6
4 4
2 MAJ 9 11 8
7 8 5
2 2
1 TS 0
0 2
2 RO SRO-I SRO-U RX 1
1 0
NOR 1
1 1
I/C 4
4 2
MAJ 2
2 1
TS 0
2 2
Instructions:
- 1.
Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2.
Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis.
- 3.
Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4.
For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
ES-301, Page 26 of 27
ES-301 Transient and Event Checklist Form ES-301-5 CREW 5 Facility: LaSalle Date of Exam: 10/17/16 Operating Test Number: NRC 15-1 A
P P
L I
C A
N T
E V
E N
T T
Y P
E Scenarios 4
5 6
T O
T A
L M
I N
I M
U M(*)
CREW POSITION CREW POSITION CREW POSITION CREW POSITION S
R O
A T
C B
O P
S R
O A
T C
B O
P S
R O
A T
C B
O P
S R
O A
T C
B O
P R
I U
RO SRO-I (8)
SRO-U RX 2
2 2
1 1
0 NOR 1
1 2
1 1
1 I/C 4 5 3 5 7 8 10 2 3 9
4 4
2 MAJ 7 8 9
8 10 5
2 2
1 TS 4 6 2
0 2
2 RO SRO-I (9)
SRO-U RX 2
2 6
3 1
1 0
NOR 1
1 2
1 1
1 I/C 3 4 5 9 3 8 10 2 3 4 7 9 12 4 4
2 MAJ 7 8 9
8 10 5
2 2
1 TS 6
5 2
0 2
2 RO (6)
SRO-I SRO-U RX 6
1 1
1 0
NOR 1
1 2
1 1
1 I/C 3 9 5 7 4 7 6
4 4
2 MAJ 7 8 9
8 10 5
2 2
1 TS 0
0 2
2 RO SRO-I SRO-U RX 1
1 0
NOR 1
1 1
I/C 4
4 2
MAJ 2
2 1
TS 0
2 2
Instructions:
- 1.
Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2.
Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis.
- 3.
Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4.
For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
ES-301, Page 26 of 27
ES-301 Transient and Event Checklist Form ES-301-5 CREW 6 Facility: LaSalle Date of Exam: 10/17/16 Operating Test Number: NRC 15-1 A
P P
L I
C A
N T
E V
E N
T T
Y P
E Scenarios 4
5 7
T O
T A
L M
I N
I M
U M(*)
CREW POSITION CREW POSITION CREW POSITION CREW POSITION S
R O
A T
C B
O P
S R
O A
T C
B O
P S
R O
A T
C B
O P
S R
O A
T C
B O
P R
I U
RO SRO-I (11)
SRO-U RX 2
2 2
1 1
0 NOR 1
2 2
1 1
1 I/C 4 5 3 5 7 8 10 4 7 9
4 4
2 MAJ 7 8 9
9 11 5
2 2
1 TS 4 6 2
0 2
2 RO SRO-I (12)
SRO-U RX 2
2 1
3 1
1 0
NOR 1
2 2
1 1
1 I/C 3 4 5 9 3 8 10 3 4 5 7 10 12 4 4
2 MAJ 7 8 9
9 11 5
2 2
1 TS 6
6 8 3
0 2
2 RO (9)
SRO-I SRO-U RX 1
1 1
1 0
NOR 1
1 2
1 1
1 I/C 3 9 5 7 3 5 5
4 4
2 MAJ 7 8 9
9 11 5
2 2
1 TS 0
0 2
2 RO SRO-I SRO-U RX 1
1 0
NOR 1
1 1
I/C 4
4 2
MAJ 2
2 1
TS 0
2 2
Instructions:
- 1.
Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2.
Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis.
- 3.
Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4.
For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
ES-301, Page 26 of 27
ES-301 Transient and Event Checklist Form ES-301-5 CREW 7 Facility: LaSalle Date of Exam: 10/17/16 Operating Test Number: NRC 15-1 A
P P
L I
C A
N T
E V
E N
T T
Y P
E Scenarios 4
6 7
T O
T A
L M
I N
I M
U M(*)
CREW POSITION CREW POSITION CREW POSITION CREW POSITION S
R O
A T
C B
O P
S R
O A
T C
B O
P S
R O
A T
C B
O P
S R
O A
T C
B O
P R
I U
RO SRO-I (10)
SRO-U RX 2
6 1
3 1
1 0
NOR 1
1 2
1 1
1 I/C 3 4 5 9 2 3 4 7 9 3 5 11 4 4
2 MAJ 7 8 8 10 9 11 6
2 2
1 TS 6
5 2
0 2
2 RO (7)
SRO-I SRO-U RX 2
1 1
1 0
NOR 1
1 1
1 1
I/C 4 5 2 3 4
4 4
2 MAJ 7 8 8 10 4
2 2
1 TS 0
0 2
2 RO (8)
SRO-I SRO-U RX 6
1 1
1 0
NOR 1
2 2
1 1
1 I/C 3 9 4 7 4 7 6
4 4
2 MAJ 7 8 8 10 9 11 6
2 2
1 TS 0
0 2
2 RO SRO-I SRO-U RX 1
1 0
NOR 1
1 1
I/C 4
4 2
MAJ 2
2 1
TS 0
2 2
Instructions:
- 1.
Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2.
Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis.
- 3.
Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4.
For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
ES-301, Page 26 of 27
ES-301 Transient and Event Checklist Form ES-301-5 CREW 8 Facility: LaSalle Date of Exam: 10/17/16 Operating Test Number: NRC 15-1 A
P P
L I
C A
N T
E V
E N
T T
Y P
E Scenarios 5
6 7
T O
T A
L M
I N
I M
U M(*)
CREW POSITION CREW POSITION CREW POSITION CREW POSITION S
R O
A T
C B
O P
S R
O A
T C
B O
P S
R O
A T
C B
O P
S R
O A
T C
B O
P R
I U
RO SRO-I (13)
SRO-U RX 2
6 1
3 1
1 0
NOR 1
1 2
1 1
1 I/C 3 5 7 8 10 2 3 4 7 9 3 5 12 4 4
2 MAJ 9
8 10 9 11 5
2 2
1 TS 4 6 5
3 0
2 2
RO (11)
SRO-I SRO-U RX 2
1 1
1 0
NOR 1
1 1
1 1
I/C 3 8 10 2 3 5
4 4
2 MAJ 9
8 10 3
2 2
1 TS 0
0 2
2 RO (10)
SRO-I SRO-U RX 6
1 1
1 0
NOR 1
2 2
1 1
1 I/C 5 7 4 7 4 7 6
4 4
2 MAJ 9
8 10 9 11 5
2 2
1 TS 0
0 2
2 RO SRO-I SRO-U RX 1
1 0
NOR 1
1 1
I/C 4
4 2
MAJ 2
2 1
TS 0
2 2
Instructions:
- 1.
Check the applicant level and enter the operating test number and Form ES-D-1 event numbers for each event type; TS are not applicable for RO applicants. ROs must serve in both the at-the-controls (ATC) and balance-of-plant (BOP) positions. Instant SROs must serve in both the SRO and the ATC positions, including at least two instrument or component (I/C) malfunctions and one major transient, in the ATC position. If an Instant SRO additionally serves in the BOP position, one I/C malfunction can be credited toward the two I/C malfunctions required for the ATC position.
- 2.
Reactivity manipulations may be conducted under normal or controlled abnormal conditions (refer to Section D.5.d) but must be significant per Section C.2.a of Appendix D. (*) Reactivity and normal evolutions may be replaced with additional instrument or component malfunctions on a 1-for-1 basis.
- 3.
Whenever practical, both instrument and component malfunctions should be included; only those that require verifiable actions that provide insight to the applicants competence count toward the minimum requirements specified for the applicants license level in the right-hand columns.
- 4.
For licensees that use the ATC operator primarily for monitoring plant parameters, the chief examiner may place SRO-I applicants in either the ATC or BOP position to best evaluate the SRO-I in manipulating plant controls.
ES-301, Page 26 of 27