ML18153A526: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
| Line 22: | Line 22: | ||
==1.0 INTRODUCTION== | ==1.0 INTRODUCTION== | ||
The Core Operating Limits Report (COLR) for Surry 1 Cycle 15 has been prepared in accordance with the requirements of Technical Specification 6.2.C. | |||
The technical specifications (TS) affected by this report are: | The technical specifications (TS) affected by this report are: | ||
TS 3.l.E.l & TS 5.3.A.6.b - Moderator Temperature-coefficient TS 3.12.A.2 & TS 3.12.A.3 - Control Bank Insertion Limits TS 3.12.B.1 & TS 3.12.B.2 - Power Distribution Limits S1Cl5/LT COLR Rev 0 Page 2 of 6 | TS 3.l.E.l & TS 5.3.A.6.b - Moderator Temperature-coefficient TS 3.12.A.2 & TS 3.12.A.3 - Control Bank Insertion Limits TS 3.12.B.1 & TS 3.12.B.2 - Power Distribution Limits S1Cl5/LT COLR Rev 0 Page 2 of 6 | ||
2.0 | 2.0 OPERATING LIMITS The cycle-specific parameter limits for the specifications listed in Section 1.0 are presented in the following subsections. These limits have been developed using the NRC-approved methodologies specified in TS 6.2.C. | ||
2.1 Moderator T!3mPerature Coefficient (TS 3.1.E.l & TS 5.3.A.6.b) 2.1.1 The Moderator Temperature Coefficient (MTC) limits are: | 2.1 Moderator T!3mPerature Coefficient (TS 3.1.E.l & TS 5.3.A.6.b) 2.1.1 The Moderator Temperature Coefficient (MTC) limits are: | ||
+6.0 pcm/°F at less than 50 percent of RATED POWER, or | +6.0 pcm/°F at less than 50 percent of RATED POWER, or | ||
| Line 39: | Line 36: | ||
* K(Z) for P ~ 0.5 0.5 S1Cl5/LT COLR Rev 0 Page 3 of 6 | * K(Z) for P ~ 0.5 0.5 S1Cl5/LT COLR Rev 0 Page 3 of 6 | ||
*THERMAL POWER | *THERMAL POWER where: P = -------------- | ||
RATED POWER 2.3.1 CFQ = 2.32 2.3.2 K(Z) is provided in Figure 2. | RATED POWER 2.3.1 CFQ = 2.32 2.3.2 K(Z) is provided in Figure 2. | ||
2o4 Nuclear Enthalpy Rise Hot Channel Factor. F~CN) (TS 3.12.B.1) | 2o4 Nuclear Enthalpy Rise Hot Channel Factor. F~CN) (TS 3.12.B.1) | ||
| Line 69: | Line 65: | ||
a. | a. | ||
a. | a. | ||
I | I 130 / | ||
130 / | |||
~ ~ 120 | ~ ~ 120 | ||
/ | / | ||
| Line 87: | Line 81: | ||
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 FRACTION OF RATED THERMAL POWER S1Cl5/LT COLR Rev 0 Page 5 of 6 | 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 FRACTION OF RATED THERMAL POWER S1Cl5/LT COLR Rev 0 Page 5 of 6 | ||
FIGURE 2 K(Z) - NORMALIZED FQ AS A FUNCTION OF CORE HEIGHT 1,2 1.1 | |||
: 6. 1.0 1 | : 6. 1.0 1 | ||
0.9 | 0.9 | ||
| Line 99: | Line 92: | ||
< 0.6 | < 0.6 | ||
::e a: | ::e a: | ||
0 ZI 05 | 0 ZI 05 N | ||
N | |||
~ | ~ | ||
0.4 0.3 0.2 0.1 0 | 0.4 0.3 0.2 0.1 0 | ||
0 2 3 4 5 6 7 8 9 10 11 12 CORE HEIGHT (FT) | 0 2 3 4 5 6 7 8 9 10 11 12 CORE HEIGHT (FT) | ||
S1Cl5/LT COLR Rev 0 Page 6 of 6}} | S1Cl5/LT COLR Rev 0 Page 6 of 6}} | ||
Revision as of 22:16, 2 February 2020
| ML18153A526 | |
| Person / Time | |
|---|---|
| Site: | Surry  |
| Issue date: | 03/31/1997 |
| From: | VIRGINIA POWER (VIRGINIA ELECTRIC & POWER CO.) |
| To: | |
| Shared Package | |
| ML18153A525 | List: |
| References | |
| NUDOCS 9704300004 | |
| Download: ML18153A526 (6) | |
Text
- CORE OPERATING LIMITS REPORT Surry 1 Cycle 15 Pattern LT Rev O March 1997 9704300004 970424 PDR ADOCK 05000280 P PDR S1Cl5/LT COLR Rev 0 Page 1 of 6
1.0 INTRODUCTION
The Core Operating Limits Report (COLR) for Surry 1 Cycle 15 has been prepared in accordance with the requirements of Technical Specification 6.2.C.
The technical specifications (TS) affected by this report are:
TS 3.l.E.l & TS 5.3.A.6.b - Moderator Temperature-coefficient TS 3.12.A.2 & TS 3.12.A.3 - Control Bank Insertion Limits TS 3.12.B.1 & TS 3.12.B.2 - Power Distribution Limits S1Cl5/LT COLR Rev 0 Page 2 of 6
2.0 OPERATING LIMITS The cycle-specific parameter limits for the specifications listed in Section 1.0 are presented in the following subsections. These limits have been developed using the NRC-approved methodologies specified in TS 6.2.C.
2.1 Moderator T!3mPerature Coefficient (TS 3.1.E.l & TS 5.3.A.6.b) 2.1.1 The Moderator Temperature Coefficient (MTC) limits are:
+6.0 pcm/°F at less than 50 percent of RATED POWER, or
+6.0 pcm/°F at 50% of Rated Power and linearly decreasing to O pcm/°F at Rated Power 2.2 Control Bank Insertion Limits (TS 3.12.A.2) 2.2.1 The control rod banks shall be limited in physical insertion as shown in Figure 1.
2.3 Heat Flux Hot Channel Factor-FO(Z) (TS 3.12.B.1)
CFQ FQ(Z) ~ -----
- K(Z) FOR P > 0.5 p
CFQ FQ(Z) ~ -----
- K(Z) for P ~ 0.5 0.5 S1Cl5/LT COLR Rev 0 Page 3 of 6
- THERMAL POWER where: P = --------------
RATED POWER 2.3.1 CFQ = 2.32 2.3.2 K(Z) is provided in Figure 2.
2o4 Nuclear Enthalpy Rise Hot Channel Factor. F~CN) (TS 3.12.B.1)
FLllI(N) ~ CFDH * {1 + PFDH*(l - P)}
THERMAL POWER where: P = -------------
RATED POWER 2.4.1 CFDH = 1.56 for Surry Improved fuel (SIF) 2.4.2 PFDH = 0. 3 S1Cl5/LT COLR Rev 0 Page 4 of 6
-- ---~-
e
- FIGURE 1 CONTROL BANK INSERTION LIMITS FULLY WITHDRAWN= 227 Steps 230
.475, 2l 7) 220 /
/
210 /
200
/
190
/ C BanK 180
.v 11.0. 18:3~
,;
170 V
/ /
/ /v 160 z
0 150 / /
.= (0, 151'
/
en 0
-C 140 /
a.
a.
I 130 /
~ ~ 120
/
~ ~ 110
/ D Bark
.,/
5 g- 100 ffi §_ 90 /
/v 8a: 80 70 V 60
/
/
/
50 40 /
30 /
/(a, 23) 20 10 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 FRACTION OF RATED THERMAL POWER S1Cl5/LT COLR Rev 0 Page 5 of 6
FIGURE 2 K(Z) - NORMALIZED FQ AS A FUNCTION OF CORE HEIGHT 1,2 1.1
- 6. 1.0 1
0.9
-(12. 0.925' r---
0.8 s;
0 u.
C 0.7 w
N
- i
< 0.6
- e a:
0 ZI 05 N
~
0.4 0.3 0.2 0.1 0
0 2 3 4 5 6 7 8 9 10 11 12 CORE HEIGHT (FT)
S1Cl5/LT COLR Rev 0 Page 6 of 6