ML20129C174
| ML20129C174 | |
| Person / Time | |
|---|---|
| Site: | Dresden, Byron, Braidwood, Quad Cities, Zion, LaSalle  |
| Issue date: | 10/16/1996 |
| From: | Waldinger L COMMONWEALTH EDISON CO. |
| To: | NRC OFFICE OF INFORMATION RESOURCES MANAGEMENT (IRM) |
| Shared Package | |
| ML20129C178 | List: |
| References | |
| NUDOCS 9610230243 | |
| Download: ML20129C174 (5) | |
Text
y 1
1 Commonwealth tilison Company 1400 Opus Place Downers Gn>ve,11,605154701 October 16,1996 U.S. Nuclear Regulatory Commission Attention: Document Control Clerk Washington,DC 20555
Subject:
Commonwealth Edison Company Quality Assurance Pragram Topical Report CE-1-A, Revision 65c Byron Units I and 2 - NRC Docket Numbers 50-454 and 50-455 Braidwood Units I and 2 - NRC Docket Numbers 50-456 and 50-457 Zion Units I and 2 - NRC Docket Numbers 50-295 and 50-304 Dresden Units 1,2, and 3 - NRC Docket Numbers 50-10,50-237, and 50-249 j
Quad Cities Units 1 and 2 - NRC Docket Numbers 50-254 and 50-265 LaSalle Units I and 2 - NRC Docket Numbers 50-373 and 50-374 i
Pursuant to 10 CFR 50.54 (a) (3), Commonwealth Edison Company (Comed) is transmitting a resision to its Quality Assurance Program Topical Report, CE-1-A. The new revision is 65c dated October 16,1996. The revision transfers specific portions of the Dresden and Quad Cities Technical Specifications to the Comed Topical Report to meet an administrative commitment resulting from the Technical Specification Upgrade Program.
A general description of the change and its basis is included in Attachment A. Specific changes ta the Topical Report are included in Attachment B. Copics of the Dresden and Quad Cities Technical Specifications, marked-up to show transition verbiage, are included in Attachment C.
It is Comed's position that the change does not reduce commitment and that it is in full compliance with the requirements of 10 CFR 50 Appendix B. Comed will implement the change immediately.
Please direct any comments or questions to this office.
Sincerely,
.)
Lon H. Waldinger[ M[
Nuclear Oversight Manager g/qa i /numanual/genitrs(2-7)/FLK/sms s
Attachments cc: A. B. Beach, Regional Administrator - Rlll C. J. Phillips, Senior Resident inspector - Braidwood i
R. LangstalT-Rill S. Burgess, Senior Resident Inspector - Byron R. R. Assa, Braidwood Project Manager - NRR C. L Vandemiet, Senior Resident Inspector - Dresden 08 G. F. Dick Jr., Byron Project Manager - NRR M. P. Iluber, Senior Resident Inspector - LaSalle o
J. F. Stang, Jr., Dresden Project Manager - NRR C. G. Miller, Senior Resident Inspector - Quad Cities
.b D. M. Skay, LaSalle County Project Manager - NRR R. A. Westberg, Acting Senior Resident inspector - Zion 1
R. M. Pulsifer, Quad Cities project Manager - NRR Oflice of Nuclear Facility Safety - IDNS C. Y. Shiraki, Zion Project Manager - NRR File 9610230243 961016 PDR ADOCK 05000010 g
PDR A tlnicom Company
ATTACIIMENT A General Description of Changes
____________s
Channes to Sections 5 and 17 of the Comed OA Tonical Report Description and Basis of the Current Requirement The Administrative Controls Sections of the Dresden 2 & 3 and Quad-Cities 1 & 2 Technical Specifications (Section 6) contain requirements for the technical review and control of procedures and programs, temporary procedure changes, and retention
~
requirements for plant o serating records. The bases for these requirements are found in 3
various Regulatory Guic es, Industry Standards, and the Code of Federal Regulations.
Description of the Revision The change transfers these requirements from the stations' Technical Specifications to the Comed QA Topical Report (QATR). Specific transfers are as follows.
- 1. Dresden 2 & 3 Technical Specification Section 6.2.B is transferred to QATR Section 5, Article 3.3.1.
- 2. Dresden 2 & 3 Technical Specification Section 6.2.C is transferred to QATR Section 5, Article 3.3.2.
- 3. Dresden 2 & 3 Technical Specification Section 6.5.A is transferred to j
QATR Section 17, Article 3.10.1.
- 4. Dresden 2 & 3 Technical Specification Section 6.5.B is transferred to QATR Section 17, Article 3.10.2.
- 5. Quad-Cities Technical Specification Sections 6.2.C is transferred to QATR Section 5, Article 3.3.1.
- 6. Quad-Cities Technical Specification Section 6.2.D is transferred to QATR Section 5, Article 3.3.2.
- 7. Quad-Cities Technical Specification Section 6.5.A is transferred to QATR Section 17, Article 3.10.1.
- 8. Quad-Cities Technical Specification Section 6.5.B is transferred to QATR Section 17, Article 3.10.2.
Because the Dresden 2 & 3 and the Quad-Cities 1 & 2 Technical Specifications were not identical in all verbiage, some minor editorial changes were necessary in the transfer. The changes are noted on marked-up copies of the Technical Specifications in Attachment C.
Bases for the Change The administrative control requirements were transferred from the Dresden and Quad-Cities Technical Specifications to meet an administrative commitment resulting from the Technical Specification Upgrade Program. (
Reference:
Letter from J. Stephen Perry, Comed, to US NRC dated February 29,1996.)
j
Imp:ct cf the Ch:nge The change has no impact on plant safety because all of requirements remain the same, only their location has changed, I
i j
l ATTACIIMENT B QATR Revision 65c, October 16,1996
)
l i
1 i
t i
i