ML20002A088
| ML20002A088 | |
| Person / Time | |
|---|---|
| Issue date: | 01/07/2020 |
| From: | Lizette Roldan-Otero NRC/NMSS/DMSST/ASPB |
| To: | Office of Nuclear Material Safety and Safeguards, NRC Region 1, NRC/RGN-III, NRC Region 4, State, Agreement States |
| Roldan-Otero L | |
| References | |
| STC-20-004 | |
| Download: ML20002A088 (3) | |
Text
January 7, 2020 ALL AGREEMENT STATES, NRC NMSS, NRC REGIONS I, III, and IV NOTIFICATION OF THE ISSUANCE, AND OPPORTUNITY TO COMMENT ON THE FOLLOWING INTERIM PROCEDURES RELATED TO THE INTEGRATED MATERIALS PERFORMANCE EVALUATION PROGRAM (IMPEP) (STC-20-004):
SA-100, IMPLEMENTATION OF INTEGRATED MATERIALS PERFORMANCE EVALUATION PROGRAM (IMPEP)
SA-104, TECHNICAL QUALITY OF LICENSING
Purpose:
This communication serves two purposes: (1) to inform the National Materials, Program (NMP) community (Agreement States and U.S. Nuclear Regulatory Commission, (NRC)) that the above indicated Office of Nuclear Material Safety And Safeguards (NMSS)
State Agreements (SA) procedures have been approved for use as interim procedures; and (2) to provide the NMP community an opportunity to comment on the these interim procedures.
Background:
On July 24, 2019, the NRC approved and issued the revised Management Directive (MD) 5.6 Integrated Materials Performance Evaluation Program (IMPEP). In September 2019, 11 working groups consisting of Agreement State and NRC representatives with IMPEP experience were formed to revise NMSS SA procedures used to implement the MD and IMPEP. To fully implement the revised MD 5.6 in a timely manner, the revision of these procedures is being completed simultaneously. These 11 working groups will ultimately revise 14 NMSS SA procedures. The charter for the working groups can be found in the Agencywide Document Access and Management System at Accession number ML19274C608. A list of all procedures included in this effort and co-chairs can be found in the charter.
Discussion: This letter notifies the NMP community that NMSS SA procedures SA-100 and SA-104 have been revised and issued for use on an interim basis until July 31, 2020, to allow NRC and Agreement State staff in the NMP community to provide comments1 based on their review of the procedure, or implementation during IMPEP reviews or periodic meetings.
The comment period which was developed following consultation with the Organization of Agreement States, ends on April 1, 2020. If there are no comments for a procedure by the NMP community, then the procedure will automatically become final on July 31, 2020, without any further action.
1 This information request has been approved by OMB 3150-0029 expiration February 28, 2022. The estimated burden per response to comply with this voluntary collection is approximately 8 hours9.259259e-5 days <br />0.00222 hours <br />1.322751e-5 weeks <br />3.044e-6 months <br />. Send comments regarding the burden estimate to the Information Services Branch, U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001, or by e-mail to infocollects.resource@nrc.gov, and to OMB Office of Information and Regulatory Affairs (3150-0029), Attn: Desk Officer for the Nuclear Regulatory Commission, 725 17th Street, NW Washington, DC 20503; e-mail: oira_submission@omb.eop.gov. An agency may not conduct or sponsor, and that a person is not required to respond to, a collection of information unless it displays a currently valid OMB control number.
Please provide comments to the Working Group Co-Chairs who are listed below.
These procedures have been uploaded to the state communications portal (SCP) website for use, and to provide for your review and comment: https://scp.nrc.gov/procedures.html.
If you have any questions regarding this correspondence, please contact me at (301) 415-3340, or the individuals listed below:
POINTS OF CONTACT:
For SA-100, Implementation of Integrated Materials Performance Evaluation Program (IMPEP):
Lizette Roldan-Otero E-MAIL: Lizette.Roldan-Otero@nrc.gov TELEPHONE:
(817) 200-1596 David Turberville E-MAIL: David.Turberville@adph.state.al.us TELEPHONE:
(334) 206-5391 For SA-104, Technical Quality of Licensing:
Lizette Roldan-Otero E-MAIL: Lizette.Roldan-Otero@nrc.gov TELEPHONE:
(817) 200-1596 Beth Schilke E-MAIL: Beth.Schilke@vdh.virginia.gov TELEPHONE:
(804) 840-4281
/RA L.Cuadrado for/
Michael C. Layton, Director Division of Material Safety, Security, State, and Tribal Programs Office of Nuclear Material Safety and Safeguards
ML20002A088 OFFICE MSST/SALPB MSST/SALPB MSST NAME LRoldanOtero LCuadrado MLayton (LCuadrado for)
DATE 1/2/20 1/7/20 1/7/20