2CAN082103, Unit 2 - Fifth 10-Year Interval Snubber Program Plan
| ML21243A127 | |
| Person / Time | |
|---|---|
| Site: | Arkansas Nuclear  |
| Issue date: | 08/31/2021 |
| From: | Keele R Entergy Operations |
| To: | Document Control Desk, Office of Nuclear Reactor Regulation |
| References | |
| 2CAN082103 | |
| Download: ML21243A127 (11) | |
Text
10 CFR 50.55a 2CAN082103 August 31, 2021 U.S. Nuclear Regulatory Commission Attn: Document Control Desk Washington, DC 20555
SUBJECT:
Fifth 10-Year Interval Snubber Program Plan Arkansas Nuclear One - Unit 2 NRC Docket No. 50-368 Renewed Facility Operating License No. NPF-6 In accordance with the American Society of Mechanical Engineers (ASME) Operations and Maintenance of Nuclear Power Plants (OM Code), Subsection ISTA-3200, "Administrative Requirements," paragraph (a), attached for your information is a copy of the Entergy Operations, Inc., (Entergy) Arkansas Nuclear One, Unit 2's (ANO-2) Snubber Program Plan for the fifth ten-year interval. The ANO-2 fifth ten-year interval Snubber Program Plan complies with the requirements of the ASME OM Code 2012 Edition. The fifth ten-year interval began on September 26, 2020, and ends on March 25, 2030.
This letter contains no new regulatory commitments.
If you have any questions or require additional information, please contact Riley D. Keele Jr.,
Manager, Regulatory Assurance, at 479-858-7826.
Sincerely, ORIGINAL SIGNED BY RILEY D. KEELE, JR.
RDK/rwc
Attachment:
Snubber Examination, Testing, and Service Life Monitoring Program Plan Fifth 10-Year Inservice Test Interval Riley D. Keele, Jr.
Regulatory Assurance Manager Arkansas Nuclear One Entergy Operations, Inc.
1448 S.R. 333 Russellville, AR 72802 Tel 479-858-7826
2CAN082103 Page 2 of 2 cc:
NRC Region IV Regional Administrator NRC Senior Resident Inspector - Arkansas Nuclear One NRC Project Manager - Arkansas Nuclear One
Attachment to 2CAN082103 Snubber Examination, Testing, and Service Life Monitoring Program Plan Fifth 10-Year Inservice Test Interval (8 Pages)
SNUBBER EXAMINATION, TESTING, AND SERVICE LIFE MONITORING PROGRAM PLAN FIFTH 10-YEAR INSERVICE TEST INTERVAL ARKANSAS NUCLEAR ONE Unit 2 Fifth Inservice Testing Interval Beginning September 26, 2020 - Ending March 25, 2030 Arkansas Nuclear One 1448 S.R. 333 Russellville, AR 72802 USNRC DOCKET NO. 50-368 FACILITY OPERATING LICENSE NO. NPF-6 COMMERCIAL OPERATION DATE: March 26, 1980 Revision 0
Revision Log Revision Description Prepared By:
Date Reviewed By:
Date Approved By:
Date:
5th 10-Year Interval Snubber Program, Revision 0 Rachel Parrish Rachel Parrish Digitally signed by Rachel Parrish Date: 2021.08.26 15:57:52
-05'00' Digitally signed by Hayley Raia-Lunger DN: cn=Hayley Raia-Lunger, c=US, o=Eng. Code Programs, ou=Entergy ANO, email=hraia@entergy.com Date: 2021.08.26 16:35:50 -05'00' Hayley Raia-Lunger Paul Kalka Digitally signed by Paul Kalka Date: 2021.08.30 08:21:14 -05'00'
TABLE OF CONTENTS SECTION
1.0 INTRODUCTION
2.0 EXAMINATION, TESTING AND SERVICE LIFE MONITORING REQUIREMENTS:
3.0 EXAMINATION and TESTING METHODS:
4.0 EXAMINATION and TESTING FREQUENCY:
5.0 EXAMINATION, TESTING AND SERVICE LIFE MONITORING EVALUATION:
6.0 REPAIR, REPLACEMENT, AND MODIFICATION REQUIREMENTS:
7.0 SCHEDULING
8.0 REPORTS AND RECORDS:
1.0 INTRODUCTION
1.1 Purpose
To provide the test plan for maintaining the operational readiness of those dynamic restraints (Snubbers) whose specific functions are required to ensure the integrity of the reactor coolant pressure boundary and safety-related system as specified in paragraph 1.2 below.
1.2 Scope
This program meets the requirements of the following subsections of the American Society of Mechanical Engineers (ASME) OM Code 2012 Edition.
x Subsection ISTA, General Requirements ISTA contains the requirements directly applicable to inservice examination and testing including the Owners Responsibility and Records Requirements.
x Subsection ISTD, Preservice and Inservice Examination and Testing of Dynamic Restraints (Snubbers) in Light-Water Reactor Nuclear Power Plants ISTD establishes requirements for preservice and inservice examination and testing, and service life monitoring of Dynamic Restraints (Snubbers) in light-water reactor nuclear power plants.
Arkansas Nuclear One Unit 2 (ANO-2) safety class piping was designed to ASME Section III standards per SPEC-ANO-M-2514. The snubbers classified as important to safety at ANO-2 are those attached directly to safety class 1, 2 or 3 piping (safety-related) and those attached to non-safety related portions of systems but included in the safety-related stress analysis (safety significant) as well as all snubbers attached to systems and components that are required in shutting down a reactor to the safe shutdown condition, in maintaining the safe shutdown condition, or in mitigating the consequences of an accident, or to ensure the integrity of the reactor coolant pressure boundary. These snubbers will be considered to be Program Snubbers. ANO-2 was designed to achieve a safe shutdown condition equivalent to the hot standby mode of operation defined in Technical Specifications.
1.3 Discussion
In order to ensure the required operational readiness of all Program Snubbers for ANO-2 during seismic or other events that may initiate dynamic loads, as required by, ANO-2 Technical Requirements Manual (TRM) 3.7.7 and TRM 6.5.1, the examination, testing and service life monitoring of these snubbers will be in accordance with the requirements of ANO Snubber Program Section SEP-SNB-ANO-001; Dynamic Restraint (Snubber) Examination and Testing Program CEP-SNB-0001; and Dynamic Restraint (Snubber) Inspection Program EN-DC-333.
The current interval snubber program began September 26, 2020, adhering to the requirements of the ASME OM Code, Subsection ISTD, 2012 Edition, in
accordance with 10 CFR 50.55a(b)(3)(v)B. The starting date for the fifth interval snubber program has been aligned with the corresponding inservice testing interval (IST) and will continue with that alignment in the future, subject to the limitations in ISTA-3120.
Examination Boundary - The examination boundary will include the snubber, all clearly visible portions of the attachment(s) to the supported component and the attachment(s) to intervening elements or building structures. Typically these are the boundaries depicted on the snubber installation drawings. This expanded boundary has been adopted to ensure structural integrity and snubber functionality.
The results of examinations on this expanded boundary will be evaluated independently from the Program pin-to-pin boundaries described in CEP-SNB-0001, paragraph 2.3. Integral and non-integral attachments for snubbers will be evaluated within the site ISI program, in accordance with the requirements of the ASME Code Section XI, 2007 Edition through 2008 Addenda.
Visual Examination Procedure OP-1306.003 Attachment 2 contains the Master Snubber List of the safety related snubbers included in the Snubber Program for ANO-2.
2.0 EXAMINATION, TESTING AND SERVICE LIFE MONITORING REQUIREMENTS:
2.1 Visual Examinations, Operational Readiness (Functional) Testing, and Service Life monitoring requirements will be performed to the extent specified within SEP-SNB-ANO-001 and referenced implementing procedures.
2.2 Snubbers are grouped into Defined Test Plan Groups (DTPGs) in accordance with ISTD-5252. Snubbers in each DTPG will be tested using the 10% sample plan per ISTD-5300. Snubbers attached to the Reactor Coolant Pumps (RCP) and the Steam Generators (SG) will be in separate DTPGs per ISTD-5253.
2.3 Snubber DTPGs are currently defined as follows.
DTPG QTY DESIGN TYPE M1 98 Small Pacific Scientific (PSA) Mechanical Snubbers (PSA 1/2 through PSA 10)
M2 57 Large PSA Mechanical Snubbers (PSA 35 and 100)
M3 47 Small Anchor Darling (AD) Mechanical Snubbers (AD-40 through AD-500 Series)
M4 30 Large Anchor Darling Mechanical Snubbers (AD 1600 through AD 12500 Series)
H3 102 Lisega Type 30 small bore hydraulic snubbers H4 8
Lisega Type 31 large bore hydraulic snubbers (RCP Snubbers)
H5 8
Paul Munroe Hydraulic Steam Generator Snubbers 2.4 The service life of all snubbers will be monitored and evaluated, and replaced or reconditioned in accordance with procedure SEP-SNB-ANO-001 and ISTD-6200 to ensure that the service life is not exceeded between surveillance examinations. The replacement or reconditioning of snubbers will be documented and records retained in accordance with ANO plant procedures.
3.0 EXAMINATION and TESTING METHODS:
3.1 Visual examinations will be performed by individuals qualified in accordance with ANO plant or vendor procedures. These examinations are conducted to ensure the mechanical and structural integrity of the snubber installation and to observe conditions that could affect functional adequacy. Visual examinations and operational readiness testing will be performed to verify the requirements specified within procedure SEP-SNB-ANO-001 are met in accordance with Subsection ISTD. Operational readiness tests will be performed in accordance with plant procedures to demonstrate adequate snubber performance in accordance with SEP-SNB-ANO-001, CEP-SNB-0001, and ISTD-5000.
4.0 EXAMINATION and TESTING FREQUENCY:
4.1 Visual Examinations and Operational Readiness Testing will be performed at the frequency specified within SEP-SNB-ANO-001 and ISTD-4250 and ISTD-5240.
4.2 Approved Code Case OMN-13 Rev. 2, which allows the extension of the visual examination interval specified in ISTD Table 4252-1, has been implemented for snubber examinations during the previous 10-year Interval and will continue through the upcoming 10-year Interval. Since the prescribed prerequisites of Code Case OMN-13 have previously been satisfied, the Visual Examination
intervals specified in Table ISTD 4252-1 have been extended in accordance with Code Case OMN-13 and will be scheduled accordingly not to exceed 10 years between the previous and subsequent examinations for each snubber.
4.3 Post installation visual examinations of snubbers will be performed whenever new snubbers are installed, existing or swapped snubbers that were functionally tested are reinstalled, or after snubber repairs, replacements or modifications.
Additional examinations will be performed on snubbers that are installed at new locations on existing systems or new systems in accordance with CEP-SNB-0001 and ISTD-4130.
4.4 Operational readiness testing requirements for new snubber installations or spare snubbers will be equal to or more stringent than those specified in SEP-SNB-ANO-001. Snubbers that are new, rebuilt, or modified will be functionally tested in accordance with the requirements of SEP-SNB-ANO-001, CEP-SNB-0001, and ISTD-5100.
5.0 EXAMINATION, TESTING AND SERVICE LIFE MONITORING EVALUATION:
5.1 Snubbers that do not appear to conform to the visual examination requirements of SEP-SNB-ANO-001, will be reported for evaluation and appropriate corrective action.
5.2 Snubbers that do not appear to conform to the visual examination acceptance requirements and are later confirmed as operable as a result of operational readiness testing may be declared acceptable for the purpose of establishing the next visual examination interval, providing that the unacceptable condition did not affect operational readiness for the snubber location.
5.3 Snubbers that do not meet the operational readiness testing acceptance criteria in SEP-SNB-ANO-001 will be evaluated to determine the cause of the failure and appropriate corrective action will be taken.
5.4 The service life of each snubber will be evaluated once each fuel cycle using manufacturers recommendations and engineering information gained through consideration of the snubber service conditions, visual examination results, periodic maintenance activities, and inservice operational readiness test results.
A service life monitoring program is included in SEP-SNB-ANO-001.
6.0 REPAIR, REPLACEMENT, AND MODIFICATION REQUIREMENTS:
6.1 Repairs, Replacements and Modifications performed on snubbers under this program conform, as applicable, to the requirements specified within the ASME Code Section XI, 2007 Edition through 2008 Addenda.
7.0 SCHEDULING
7.1 Schedules for snubber visual examinations, operational readiness testing, and service life replacements will be established, tracked, and maintained in
accordance with SEP-SNB-ANO-001, CEP-SNB-0001, and Subsection ISTD by the Snubber Program Owner.
7.2 The Snubber Program Owner will identify and track expanded sample plan or additional testing and/or examinations as required by SEP-SNB-ANO-001, CEP-SNB-0001, and Subsection ISTD.
8.0 REPORTS AND RECORDS:
8.1 Reports and records for the visual examinations and operational readiness testing will be maintained for all Program Snubbers.
8.2 Applicable records and reports, as required for repair and replacements, will be maintained.
8.3 Records of the service life of all Program Snubbers, including the date at which the service life commences or expires, and associated installation and maintenance records will be maintained.
8.4 The above applicable records will be maintained in accordance with CEP-SNB-0001 and Entergy Document and Records Management Programs.