2CAN021503, Response to RAI Associated with the Elimination of Movement of Coontrol Element Assembly 18 from Surveillance Requirement 4.1.3.1.2 for the Remainder of Cycle 24
2CAN021501, License Amendment Request Allowance to Eliminate Movement of Control Element Assembly 18 from Surveillance Requirement 4.1.3.1.2 for the Remainder of Cycle 24
W3F1-2013-0035, License Amendment Request to Address Multiple Administrative Issues with the Technical Specifications
LR-N10-0015, Application for Technical Specification Change Regarding Risk-Informed Justification for the Relocation of Specific Surveillance Frequency Requirements to a Licensee Controlled Program
LR-N09-0193, License Amendment Request to Adopt TSFT-475, Revision 1, Control Rod Notch Testing Frequency and SRM Insert Control Rod Action
L-2007-175, Rod Position Indication Systems
L-2007-083, License Amendment Request (LAR 192) Inoperable Rod Position Indication
L-2006-209, License Amendment Request Inoperable Rod Position Indication
SBK-L-18094, License Amendment Request 18-02, Application to Revise the Technical Specifications Associated with Movable Control Rods
NRC-2016-0273, Applications and Amendments to Facility Operating Licenses and Combined Licenses Involving No Significant Hazards Considerations; Publication Date: January 3, 2017
L-2004-181, Response to Request for Additional Information for Proposed License Amendment Inoperable Rod Position Indication
SBK-L-20154, Submittal of Changes to the Seabrook Station Technical Specification Bases
AECM-84-0318, Application for Amend to License NPF-13,revising Tech Specs to Correct Typographical Errors,To Implement Editorial Changes & to Provide Clarification of Basic Meaning & Intent of Tech Spec changes.Marked-up Tech Specs Encl
2CAN079504, Application for Amend to License NPF-6,reducing CEA Exercise Frequency from at Least Once Per 31 Days to at Least Once Per 92 Days
2CAN049102, Application for Amend to License NPF-6,changing Tech Spec 3.1.3.1 & Associated Bases to Allow Continued Operation,For Up to 72 H,W/More than One Full Length or Part Length Control Element Assembly Inoperable
05000373/LER-1987-019-01, :on 870403,during Weekly Control Rod Exercising surveillance,11 Rods Listed on Signoff Sheet Skipped by Previous Shift.Caused by Personnel Error.Personnel Will Be Trained on Event
05000413/LER-1986-014, :on 860312,periodic Surveillance Test to Exercise Control Rods Not Performed within Required Tech Spec Interval.Caused by Inadequate Procedure.Step 12.2 of Procedure PT/1/A/4600/01 Revised
05000528/LER-1986-042, :on 860617,automatic Reactor Trip Generated Due to Low DNBR Trips.Caused by Inadequate Procedure.Procedure Rev Will Be Implemented to Correct Inadequacies
05000412/LER-1996-001, :on 960212,PSC Rod Bank Pulse Step Counter Positions Indicating 0 Steps.Caused by Electrical Distribution Sys Disturbance That Occurred 36 H Earlier. Performed Manual Cold Start of PCS
05000373/LER-1994-004-01, :on 940105,CRPI Sys Failed Due to Card Failure. Notice of Enforcement Discretion Requested & Granted Not to Enforce Compliance W/Ts 3.1.3.7 for Period of 6 Addl H & on 940105,RPIS Declared Operable Following Repair & Testing
B14567, Submits Response to Generic Ltr 93-04, Rod Control Sys Failure & Withdrawal of Rod Control Cluster Assemblies
HNP-99-149, Application for Amend to License NPF-63,implementing Selected Improvements Described in GL 93-05
05000335/LER-1996-002-01, :on 960222,control Element Assembly Dropped on Unit 1 During Periodic Testing.Caused by Failed Silicon Control Rectifier in Upper Gripper Power Switch Module.Power Switch Modules Replaced
L-95-169, Application for Amends to Licenses DPR-31 & DPR-41,modifying TS Per Selected Line Items from NRC GL 93-05, Line-Item TS Improvements to Reduce SRs for Testing During Power Operation