ONS-2017-079, Supplemental Information to Support NRC Review of Relief Request No. 17-0N-001; Alternative to Extend the Code Case N-770, Inspection Item B Examination Frequency
PNP 2015-043, Relief Request Number RR 4-22 - Proposed Alternative, Use of Alternate ASME Code Case N-770-1 Baseline Examination
CP-201500402, Relief Request 1B3-3 Inservice Inspection for Application of an Alternative to ASME Boiler & Pressure Vessel Code Section XI Examination Requirements for Reactor Pressure Vessel Cold Leg Weld Inspection Frequency
NOC-AE-14003194, Request for Relief from Code Case N-770-1, Subsection 2400 and Table 1 Inspection Frequency of Reactor Vessel Cold Leg Nozzle to Safe-end Welds, (Relief Request RR-ENG-3-17)
NL-14-0295, Proposed Inservice Inspection Alternative FNP-ISI-ALT-15, Version 1.0
CP-201301361, Relief Request No. B-14 for Reactor Pressure Vessel Hot Leg Nozzle Weld Examinations (Second ISI Interval End Date: August 2, 2014)
NL-13-1495, Proposed Inservice Inspection Alternative FNP-ISI-AL T-13, Version 2.0
L-2013-112, ASME Section XI, Inservice Inspection, Relief Requests No. 11 Alternative Through-Wall Sizing Requirements for Implementation of Appendix Viii, Supplement 10
CP-201300003, Submittal of Relief Request No. B-2, Third 10 Year ISI Interval from 10CFR50.55a Requirements for Reactor Vessel Hot Leg Nozzle Weld Examinations (Third ISI Interval Start Date August 13, 2010)
NL-12-2014, Proposed Inservice Inspection Alternative FNP-ISI-AL T-13 Version 1.0
RC-12-0097, (VCSNS) Unit 1, Request for Weld Recategorization for VCSNS Steam Generator Nozzle to Safe End Welds (Preliminary Submittal - RR-III-08)
RS-12-040, Response to Request for Additional Information Related to Braidwood Station Relief Request 13R-08
L-11-238, Reply to Request for Additional Information for the Review of License Renewal Application and License Renewal Application Amendment No. 13
TMI-11-061, ISI Program Plan, Fourth Ten-Year Inspection Interval
NL-11-0463, Proposed Relief Request for the Fourth ISI Interval (FNP-ISI-RR-01)
TMI-11-030, Response to Request for Additional Information - Submittal of Relief Request RR-10-02 Concerning the Weld Overlay of the Pressurizer Spray Nozzle to Safe-End and Safe-End to Elbow Dissimilar Metal Welds
RC-18-0036, (Vcsns), Unit 1 - Relief Request RR-4-13, Use of a Risk-Informed Process as an Alternative for the Selection of Class 1 and Class 2 Piping Welds - Response to Request for Additional Information
DCL-17-048, Diablo Canyon, Units 1 and 2 - Request for Approval of an Alternative to the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code Section Xi Examination Requirements for Class 1 and 2 Piping Welds, Request for R
TMI-10-100, Submittal of Relief Request RR-10-02 Re Weld Overlay of the Pressurizer Spray Nozzle to Safe-End & Safe-End to Elbow Dissimilar Metal Welds
L-09-179, Response to Requests for Additional Information Related to Alternative Dissimilar Metal Weld Repair Methods
AEP-NRC-2009-42, Response to Request for Additional Information Regarding Relief Request (ISIR-28) for Use of Weld Inlays as an Alternate Repair Technique for Alloy 82/182 Dissimilar Metal Welds in Reactor Vessel Safe End-to-Primary Nozzles
CNL-19-012, American Society of Mechanical Engineers Boiler and Pressure Vessel Code Section XI, Inservice Inspection Program, Request for Alternative, 18-ISI-1
W3F1-2019-0009, Proposed Inservice Inspection Program Alternative WF3-RR-19-1 for Application of Dissimilar Metal Weld Full Structural Weld Overlay - Reactor Coolant System Cold Leg Drain Nozzles
RA-19-0138, Proposed Alternative in Accordance with 10 CFR 50.55a(z)(1) for Reactor Vessel Cold Leg Dissimilar Metal Weld Inspections
L-20-117, 10 CFR 50.55a Request Number 2-TYP-4-RV-06, Hardship for Hot Leg Nozzle Inspections
CP-202100143, (CPNPP) - Relief Request 1A4-3 for Continued Use of a Risk-Informed Process as an Alternative for the Selection of Class 1 and 2 Piping Welds for Unit 1 Inservice Inspection
NOC-AE-21003806, Inservice Inspection Program Plan and Inservice Testing Program Snubber Inservice Test Plan for the Fourth Ten-Year Interval
L-2020-123, Amendment 26 to Updated Final Safety Analysis Report, Chapter 18, Aging Management Programs and Time-Limited Aging Analyses Activities
L-2020-043, Amendment 30 to Updated Final Safety Analysis Report, Chapter 18, Aging Management Programs and Time-Limited Aging Analyses Activities
SBK-L-21126, Fourth 10 Year Interval - Inservice Inspection (ISI) Program Plan
L-2023-075, Response to Request for Additional Information (RAI) Regarding Exemption Request, License Amendment Request and Revised Response in Support of a Risk-Informed Resolution of Generic Letter 2004-02
ONS-2018-023, Response to NRCs Request for Additional Information Regarding Relief Request 17-ON-001; Alternative to Extend the Code Case N-770, Inspection Item B, Examination Frequency
ONS-2017-072, Fifth Ten Year Inservice Inspection Interval, Relief Request No. 17-0N-001; Alternative to Extend the Code Case N-770, Inspection Item B Examination Frequency
05000317/LER-2016-002, Regarding Pressurizer Safety Relief Nozzle Dissimilar Metal Weld Flaw Exceeded American Society of Mechanical Engineers Code Allowable Limit
L-PI-10-077, Supplement to License Amendment Request to Exclude the Dynamic Effects Associated with Certain Postulated Pipe Ruptures from the Licensing Basis Based Upon Application of Leak-Before-Break Methodology Additional .
PNP 2025-059, Relief Request Number RR 5-12, Proposed Alternative to ASME Section XI Code for Full Structural Weld Overlays of Primary Coolant System Hot Leg, Cold Leg, and Pressurizer Nozzle Dissimilar Metal Welds
PNP 2025-058, Relief Request Number RR 5-11, Proposed Alternative to ASME Section XI Code Requirements for Primary Coolant System Piping Branch Connection Modifications