HNP-15-039, Relief Request I3R-15 Revision 2, Reactor Vessel Closure Head Nozzle Repair Technique, Inservice Inspection Program, Third Ten-Year Interval
HNP-15-034, Relief Request I3R-15 Revision and Supplement, Reactor Vessel Closure Head Nozzle Repair Technique, Inservice Inspection Program - Third Ten-Year Interval
HNP-15-010, Relief Request I3R-15, Reactor Vessel Closure Head Nozzle Repair Technique Inservice Inspection Program - Third Ten-Year Interval
HNP-13-119, Relief Request I3R-13, Reactor Vessel Closure Head Nozzle 37, Inservice Inspection Program - Third Ten-Year Interval
HNP-12-060, Relief Request I3R-09 Reactor Vessel Closure Head Nozzle Repairs Inservice Inspection Program - Third Interval, Request for Additional Information Response
HNP-12-054, Relief Request I3R-09 Reactor Vessel Closure Head Nozzles Inservice Inspection Program - Third Interval
NG-11-0320, Fourth 10-Year Inservice Inspection Plan
NL-11-0692, Discrepancies Identified Between Alternative ISI-ALT-08-02 and the NRC Safety Evaluation
TMI-11-078, Response to Request for Additional Information - Submittal of Relief Request RR-10-02 Concerning the Weld Overlay of the Pressurizer Spray Nozzle to Safe-End and Safe-End to Elbow Dissimilar Metal Welds
TMI-11-061, ISI Program Plan, Fourth Ten-Year Inspection Interval
TMI-11-062, Response to Request for Additional Information - Submittal of Relief Request RR-10-02 Concerning the Weld Overlay of the Pressurizer Spray Nozzle to Safe-End and Safe-End to Elbow Dissimilar Metal Welds
1CAN011101, Response to Request for Additional Information, Regarding the Request for Alternative ANO1-R&R-013, Repairs to the Pressurizer Instrumentation Penetrations
NG-10-0567, Revision to Relief Request for Alternative to ASME Section XI Requirements to Use Structural Weld Overlay Repairs as an Alternative Repair Technique
TMI-10-100, Submittal of Relief Request RR-10-02 Re Weld Overlay of the Pressurizer Spray Nozzle to Safe-End & Safe-End to Elbow Dissimilar Metal Welds
L-10-123, Request for Additional Information Regarding 10 CFR 50.55a Request RR-A34 for Alternative Repair Methods for Reactor Pressure Vessel Head Penetration Nozzles
1CAN041004, Supplemental Information to Fourth 10-Year Inservice Inspection Interval Request for Alternative ANO1-R&R-013 Repairs to Pressurizer Instrumentation Penetrations
L-10-099, 10 CFR 50.55a Request for Alternate Repair Methods for Reactor Pressure Vessel Head Penetration Nozzles
1CAN041002, Fourth 10-Year Inservice Inspection Interval, Request for Alternative ANO1-R&R-013, Repairs to the Pressurizer Instrumentation Penetrations
NLS2010013, Request Relief from Certain Inservice Inspection (ISI) Code Requirements
NL-09-1510, Vogtle Electric Generating Plant, Units 1 and 2 - Inservice Inspection Plan Third Inspection Interval Volume 1, Version 3.0
PLA-6550, Comment (19) of T. S. Rausch on Behalf of PPL Susquehanna, LLC Re Draft Regulatory Guides; DG-1191, DG-1192 and DG-1193
RS-09-118, Submittal of Relief Requests Associated with the Third Inservice Inspection Interval
L-09-179, Response to Requests for Additional Information Related to Alternative Dissimilar Metal Weld Repair Methods
AEP-NRC-2009-42, Response to Request for Additional Information Regarding Relief Request (ISIR-28) for Use of Weld Inlays as an Alternate Repair Technique for Alloy 82/182 Dissimilar Metal Welds in Reactor Vessel Safe End-to-Primary Nozzles
LR-N09-0018, Relief Request RR-HC-I3R-04 Proposed Alternate Repair Method
L-09-020, 10 CFR 50.55a Requests for Alternative Dissimilar Metal Weld Repair Methods for Reactor Vessel Nozzles, Reactor Coolant Pump Nozzles, and Reactor Coolant Piping
NL-08-0877, Proposed Alternative in Accordance with 10 CFR 50.55a(a)(3)(i) Application of Dissimilar Weld Full-Structural Weld Overlays Alternative Lsi ALT-08-02 Version 1
JAFP-08-0131, Enclosure 3, Structural Integrity Associates, Inc. Calculation 0800769.316 Reconciliation of Recirculation Inlet N2 Nozzle-to-Safe End Weld Overlay Repair with Nozzle Stress Report
AEP-NRC-2008-25, Use of Weld Inlays as an Alternative Repair Technique for Reactor Vessel Safe End-to-Primary Nozzle Alloy 82/182 Welds
JAFP-08-0102, Request for Relief (RR-7 Revision 1) - Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
JAFP-08-0099, Request for Relief (RR-7) - Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
L-2008-210, In-Service Inspection Plans, RAI Reply for Fourth Ten-Year Interval Unit 1 Relief Request 2
L-PI-08-003, Prairie Lsland Nuclear Generating Plant, Unit 2 - Response to RAI Regarding 10 CFR 50.55a, Request for Relief from ASME Section XI Repair and Replacement Requirements: Proposed Alternatives for Application of Structural Weld Overlay to t
L-2008-098, In-Service Inspection Plans, Submittal for the Use of Structural Weld Overlays as an Alternative Repair Technique, Fourth Ten-Year Interval Unit 1 Relief Request 2
NLS2008031, Response to Request for Additional Information Regarding 10 CFR 50.55a Request RI-35, Revision 0, and Submittal of RI-35, Revision 1
NL-08-0311, Response to NRC Request for Additional Information Regarding Application of a Dissimilar Metal Weld Full-Structural Weld Overlay
1CAN020803, Request for Alternative ANO1-R&R-011 Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
NL-08-0280, Application of a Dissimilar Metal Weld Full-Structural Weld Overlay
W3F1-2008-0010, Revised Request for Alternative W3-R&R-006 - Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
2CAN020801, Supplemental to Request for Alternative ANO2-R&R-005, Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
SBK-L-08022, Supplement to Request for Use of Structural Weld Overlays as an Alternative Repair Technique
NLS2008012, 10 CFR 50.55a Request Number RI-35, Revision 0
LR-N07-0281, Response to Request for Additional Information, Relief Request HC-RR-I2-W02 Proposed Alternative Repair Method
LR-N07-0276, Relief Request HC-RR-I2-W03 Proposed Alternative Repair Method
LR-N07-0273, Relief Request HC-RR-I2-W02, Proposed Alternative Repair Method
1CAN100702, Request for Alternative ANO1-R&R-011, Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
L-2007-148, In-Service Inspection Plans, Resubmittal for the Use of Structural Weld Overlays as an Alternative Repair Technique Third Ten-Year Interval Unit 2 Relief Request 10
RA-07-079, Submittal of Program Plan Associated with the Third Inservice Inspection (ISI) Interval and the Second Containment Inspection (Cisi) Interval
CPSES-200701302, Relief Request B-4 to the Unit 2 Inservice Inspection (ISI) Program Plan from the 1998 Edition of ASME Code, Section XI, Through 2000 Addenda (Interval Start Date - August 03, 2004, Second Interval)
NL-07-1320, Proposed Alternative or Application of Pressurizer Nozzle Full-Structural Weld Overlays
NL-07-1179, Additional Request Regarding the NRC Approval Alternative for Application of Pressurizer Nozzle Full-Structural Weld Overlays
NOC-AE-07002177, Proposed Alternative to ASME Section XI Requirements for Weld Overlay Hold-Time (RR-ENG-2-48)
L-PI-07-054, CFR 50.55a Request: Proposed Alternatives for Application of Structural Weld Overlay to the Pressurize Surge Nozzle Weld (2-RR-4-81)
RC-07-0085, Virgil Summer - Request to Use Alternatives to ASME Code Section XI Requirements for Application of Weld Overlay Repairs (RR-III-05)
L-07-073, Supplement to Proposed Alternative to American Society of Mechanical Engineers Code Section XI Repair Requirements (Request No. BV1-PZR-01, Revision 1)
HNP-07-041, Inservice Inspection Relief Request 1, Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
CNRO-2007-00021, Request for Alternative W3-R&R-006 Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
ULNRC-05385, Response Regarding 10 CFR 50.55a Request for Relief from ASME Section XI Repair and Replacement Requirements: Proposed Alternatives for Application of Structural Weld Overlays to Pressurizer Nozzle Welds
CNRO-2007-00014, Request for Alternative ANO1-R&R-010 Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
CNRO-2007-00012, Request for Alternative ANO2-R&R-005, Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
CNRO-2007-00010, Request for Alternative ANO1-R&R-010 Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
L-07-039, Proposed Alternative to American Society of Mechanical Engineers Code Section XI Repair Requirements (Request No. BV1-PZR-01)
NG-07-0176, Alternative to ASME Section XI Requirements to Use Code Cases N-504-2 and N-638-1 for Weld Overlay Repairs at the Duane Arnold Energy Center
NG-07-0188, Response to Requests for Additional Information on Alternative to ASME Section XI Requirements to Use Code Cases N-504-2 and N-638-1 for Weld Overlay Repairs
NL-07-0366, Proposed Alternative for Application of Pressurizer Nozzle Full-Structural Weld Overlays - Revision 2.0
CNRO-2007-00001, Request for Alternative ANO1-R&R-010, Proposed Alternative to ASME Code Requirements for Weld Overlay Repairs
NL-06-2768, Proposed Alternative for Application of Pressurizer Nozzle Full-Structural Weld Overlays and Response to Request for Additional Information
BYRON 2006-0027, Transmittal of Inservice Inspection Program Plan for Third Ten Year Inspection Interval
NL-06-2434, Response to Request for Additional Information Regarding Proposed Alternative for Application of Full Structural Weld Overlays on Pressurizer Nozzles
CPSES-200601983, Relief Request B-6 to Unit 1 Inservice Inspection Program Plan from the 1998 Edition of ASME Code, Section XI, Through 2000 Addenda (Interval Start Date - August 13, 2000, Second Interval)
L-06-146, Supplemental Information Regarding Proposed Alternative to American Society of Mechanical Engineers Code Section XI Repair Requirements (Request No. BV2-PZR-01)
L-06-142, Supplemental Information Regarding Proposed Alternative to American Society of Mechanical Engineers Code Section XI Repair Requirements (Request No. BV2-PZR-01)
NOC-AE-06002055, Response to NRC Request for Additional Information on Proposed Alternative to ASME Section XI Requirements for Application of Weld Overlay (RR-ENG-2-43)
BYRON 2006-0097, Response to NRC Request for Additional Information to Byron Station Relief Request I3R-08
NL-06-1713, Proposed Alternative for Application of Pressurizer Nozzle Full-Structural Weld Overlays
L-06-123, Response to Request for Additional Information Regarding Proposed Alternative to ASME Code Section XI Repair Requirements (Request No. BV2-PZR-01)
NOC-AE-06002000, Proposed Alternative to ASME Section XI Requirements for Application of a Weld Overlay (RR-ENG-2-43)
L-06-038, Proposed Alternative to American Society of Mechanical Engineers Code Section XI Repair Requirements
ET 06-0055, Results of Ultrasonic Examinations of the Full Structural Weld Overlays on Pressurizer Nozzle Welds
ET 06-0044, Operating Corporations Revised Commitment Regarding 10 CFR 50.55a Request I3R-05
ET 06-0042, Response to the September 20, 2006 NRC Request for Additional Information Regarding 10 CFR 50.55a Request I3R-05
ET 06-0021, Operating Corporations Response to Request for Additional Information Regarding 10 CFR 50.55a Request 13R-05 and Submittal of Revision 1 to 10 CFR 50.55a Request 13R-05
RA-20-0334, Relief Request to Utilize an Alternative Acceptance Criteria for Code Case N-853, - PWR Class 1 Primary Piping Alloy 600 Full Penetration Branch Connection Weld Metal Buildup for Material Susceptible to Primary
RA-21-0270, Response to Second Request for Additional Information (RAI) Regarding Relief Request to Utilize an Alternative Acceptance Criteria for Code Case N-853
3F0907-05, Relief Request 07-003-RR, Revision 1, and Response to Request for Additional Information
3F0407-15, Resubmittal of Relief Requests 07-001-RR, Revision 0, and 07-002-RR, Revision 0
3F0307-10, Relief Requests 07-001-RR, Revision 0, and 07-002-RR, Revision 0
3F1008-03, Relief Request 08-002-RR, Revision 0
3F0308-04, Relief Request 08-001-RR, Revision 1
3F0309-03, Response to Request for Additional Information Regarding Relief Request 08-002-RR, Revision 0, Dissimilar Metal Weld Overlay Repair During the Fourth 10-Year Inservice Inspection Interval
RS-16-045, Response to Requests for Additional Information for Relief for Alternate Requirements for Repair of Reactor Vessel Head Penetrations with Nozzles Having Pressure-Retaining Partial-Penetration J-Groove Welds
HNP-13-057, Relief Request I3R-11 Reactor Vessel Closure Head Nozzles Inservice Inspection Program - Third Interval
05000346/LER-2010-002, Regarding Control Rod Drive Nozzle Primary Water Stress Corrosion Cracking and Pressure Boundary Leakage
BW070013, Second 10-Year Inservice Inspection Interval, Relief Request I2R-48, Structural Weld Overlays on Pressurizer Spray, Relief, Safety and Surge Nozzle Safe-Ends and Associated Alternative Repair Techniques
CPSES-200700229, Comanche, Response to Request for Additional Information, Relief Request B-6 for the Unit 1 Inservice Inspection (ISI) Program Plan from the 1998 Edition of ASME Code, Section XI, Through 2000 Addenda (Interval Start Date
ULNRC-06947, Request for ASME Code Relief Regarding 48-Hour Hold Time When Performing Repairs Using Ambient Temperature GTAW Temper Bead Method Per ASME Code Case N-638-11 (Relief Request I5R-01)
PNP 2025-067, Additional Information in Support of Relief Request RR 5-12, Proposed Alternative to ASME Section XI Code for Full Structural Weld Overlays of Primary Coolant System Hot Leg, Cold Leg, and Pressurizer Nozzle Dissimilar Metal Weld