ENS Event | |
|---|---|
20:30 Aug 23, 2010 | |
| Title | |
| Event Description | AGREEMENT STATE REPORT- BASIS WEIGHT GAUGE ABB MODEL TG-1(U-7) SHUTTER FAILED TO CLOSE
The following report was received via e-mail: The Minnesota Department of Health was notified on 8/24/2010 by a representative from Boise Cascade that a Basis Weight Gauge located at the Off Machine Coater Reel had a shutter failure. The shutter is designed to close after going off sheet; however it remained in the open position. When power was cut to the device the device failed closed (shutter did close). The gauge was taken out of service and repaired by ABB. The problem was determined to be shorted out wires in the device. The device has been repaired and placed back in service. The source is 250 mCuries Kr-85, serial number K-1988E. Event Report Number: MN100003 |
| Where | |
|---|---|
| Boise Cascade Corporation International Falls, Minnesota (NRC Region 3) | |
| License number: | G/L |
| Organization: | Minnesota Department Of Health |
| Reporting | |
| Agreement State | |
| Time - Person (Reporting Time:+40.43 h1.685 days <br />0.241 weeks <br />0.0554 months <br />) | |
| Opened: | Brandon Juran 12:56 Aug 25, 2010 |
| NRC Officer: | Joe O'Hara |
| Last Updated: | Aug 25, 2010 |
| 46207 - NRC Website | |
Boise Cascade Corporation with Agreement State | |
WEEKMONTHYEARENS 462072010-08-23T20:30:00023 August 2010 20:30:00
[Table view]Agreement State Agreement State Report- Basis Weight Gauge Abb Model Tg-1(U-7) Shutter Failed to Close 2010-08-23T20:30:00 | |