ML19235A069
| ML19235A069 | |
| Person / Time | |
|---|---|
| Site: | Surry  |
| Issue date: | 08/19/2019 |
| From: | Alan Huynh NRC/NRR/DMLR/MCCB |
| To: | |
| Alan Huynh, NRR/DMLR/MCCB, 415-1137 | |
| Shared Package | |
| ML19235A051 | List: |
| References | |
| Download: ML19235A069 (2) | |
Text
PRODUCT DATA SHEET BIOŽ K-10+ Fire Rated Mortar Classi~ed System NumbersFor list of systems see www.bio~reshield.com2. Material Properties Color Light RedApproximate expansion on setting 0.1%Density loose bulk 40.6 pcf (650 kg/m3)
Density wet cast 84.3 pcf (1350 kg/m3)
Density oven dried 54.6 pcf (875 kg/m3)Crushing strength, wet 700 psi (5 N/mm2)Asbestos ~llers NonepH Values 6.5Adhesion to concrete Excellent Adhesion to Steel/Copper Good Adhesion to Cables GoodFreeze-Thaw Resistance ExcellentWorkable Pot Life Approximately 45 minutesSets hard 3 - 4 hour4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br />sFully Cured 28 daysYield 2:1 mix ratio 1500 cubic inches per 45 lb bag 3:1 mix ratio 1350 cubic inches
per 45 lb bag1. Product DescriptionBIOŽ K-10+ Fire Rated Mortar is a specially formulated rapid hardening gypsum/cement compound. The product provides the optimum combination of workability, strength and ~re resistance. When mixed with clean water to a suitable consistency, BioŽK-10+
Fire Rated Mortar sets without shrinking and can form a rigid, gas tight, ~re resistant seal.
It can easily be cut or drilled and resealed if future penetrants are needed. No special tools are required to mix or install the product.
BioŽ K-10+ Fire Rated Mortar systems are
rated for up to 4 hours4.62963e-5 days <br />0.00111 hours <br />6.613757e-6 weeks <br />1.522e-6 months <br /> and have been tested in accordance with ASTM E 814 (UL 1479) and ULC-S115-95 test standards. BIOŽ K-10+ is protected in a wet stage as well as in a dry stage against mold growth with a
combination of biocides.Use BioŽ K-10+ Fire Rated Mortar for various applications:Wall or oor applicationsAround metallic pipes (steel, copper, iron, etc.)
Around electrical power cables Around communication cables (telephone, ~ber optic, etc.)
Blank openings Concrete or concrete block (CMU) walls Concrete oors Cable Trays (aluminum or steel)BioŽ K-10+ Fire Rated Mortar Features* Non-sag Adjustable consistency (pourable or trowelable)
- High yield
- Non-shrinking
- Safe and simple to use
- Workable approximately 45 minutes
.3. ApplicationsA fire rated load bearing mortar to economically ~restop large openings for through-penetrations in ~re rated walls and
oors. Can be used with power cables, ~ber optic telephone cables. Recommended for use with aluminum or steel cable trays, as well as EMT, copper, steel, or black iron
pipe. 4. Installation DataMixing Procedure: Mix with clean water in a suitable container. Slowly add the dry mortar mix to water while stirring by hand, or by power mixer, to ensure a smooth lump free mix.Recommended Mixing Ratios:Mortar Mix: Water (by volume)
Consistency:
Pourable For Floor Openings 2 1/2 : 1 Stiff for Wall Openings 3 : 1
DO NOT USE A MIX RATIO OF LESS
THAN 2:1NOTE: The wet mix will remain usable for approximately 45-60 minutes depending on batch size, water content and temperature.
Once material has been mixed to the desired consistency, DO NOT attempt to alter by adding additional water or mortar THIS WILL CAUSE THE MATERIAL TO HARDEN VERY QUICKLY. Any spillage should be wiped up with a damp cloth before setting occurs.Thickness/Fire RatingRefer to tested designs or manufacturer's recommendations. For additional technical information call toll free 800-231-3345.
BIOŽ K-10+ FIRE RATED MORTAR9. CautionsFOR CHEMICAL EMERGENCY, SPILL, LEAK, FIRES, EXPOSURE OR ACCIDENT, CALL CHEMTREC - DAY OR NIGHT 1-800-424-9300.For additional information, refer to Material Safety Data Sheet.For additional technical service,call: 713-263-8001 or 1-800-231-3345fax: 713-263-7577 or 1-800-452-2824RECTORSEAL2601 SPENWICK DRIVE HOUSTON, TEXAS 77055NOTE: Damming materials can be made from various materials, e.g. insulation, hard foam, wood, backer rod, etc. These damming materials can be either combustible or non-combustible. Combustible damming material is usually removed after the mortar mix has set. Non-combustible damming materials can be left in place. However, the speci~er or the local authority having jurisdiction may require a speci~c type of or the removal of a particular
damming material. If damming material is to be removed, a suitable bond breaker (e.g.
plastic sheeting) should be used between the mortar mix and the damming material.
- 5. Testing DataBioŽ K-10+ Fire Rated Mortar has been classified and listed by Underwriters Laboratories and tested at a positive pressure
with a minimum .01 inches (2.5 Pa) of water and in accordance with ASTM E 814, UL 1479
and ULC-S115-95. 6. Storage & HandlingMust be stored in dry conditions under protective cover in its original container.
Minimum shelf life of two years when stored inside, in a conditioned area and in the original
unopened containers.7. Availability 45 pound (20.4 kg) bags 20 pound (9.1 kg) pails8. LimitationsBioŽ K-10+ Fire Rated Mortar is not designed to be used in areas under continuous immersion or in areas which would be continuously wet. The mortar should not be used in areas which would experience
vibration or movement.Health and Safety Non-toxic and asbestos free. Take normal precautions to avoid inhalation, or ingestion, and to ensure adequate ventilation when mixing. In the event of eye or mouth contact, wash immediately with plenty of clean water.
Refer to Material Safety Data Sheet for additional information.CONTAINS: Gypsum Plaster and Perlite aggregate. PRECAUTIONS: Do not take internally. May cause eye, skin, and respiratory tract irritation. Wear gloves and safety glasses. Wash after handling. FIRST AID: For any overexposure or if skin irritation
develops get immediate medical attention
after ~rst aid is given. EYES: Flush for 15 minutes with clean water. Seek immediate medical attention. SKIN: Wash with soap and water. Do not use solvents to remove from skin. INHALATION: Remove to fresh air.
INGESTION: DO NOT INDUCE VOMITING.
SPILLS: Clean up immediately with scrapers and water. STORAGE AND HANDLING:
Keep container upright and tightly closed. Do not reuse container. KEEP OUT OF REACH
OF CHILDREN.INSTALLATION INSTRUCTIONS WALL OPENINGSFor small holes and gaps, trowel a stiff mix into the opening to the recommended depth.
For larger holes, use an appropriate damming material to support the mix until it sets.
FLOOR OPENINGSWhen sealing holes in floor slabs, an appropriate damming material must be installed prior to pouring in the mortar mix.
Panels of damming materials should be cut to ~t tightly around penetration within the opening so as to avoid leakage of the mortar
mix during pouring.