IR 07200201/1990002
| ML19121A553 | |
| Person / Time | |
|---|---|
| Site: | 07200201, 03011772 |
| Issue date: | 04/23/2019 |
| From: | Harvey E F NRC/RGN-III |
| To: | Reeve W JAN X-ray Services, JANX |
| References | |
| IR 2019002 | |
| Download: ML19121A553 (2) | |
Text
April 9, 2019
subject
to posting in accordance with 10 CFR 19.11. (Violations and Corrective Actions) Statement of Corrective Actions I hereby state that, within 30 days, the actions described by me to the Inspector will be taken to correct the violations identifie This statement of corrective actions is made in accordance with the requirements of 10 CFR 2.201 (corrective steps already taken, corrective steps which will be taken, date when full compliance will be achieved).
I understand that no further written response to NRC will be required, unless specifically requeste TITLE PRINTED NAME SIGNATURE DATE LICENSEE'S REPRESENTATIVE NRC INSPECTOR Edward F. Harvey BRANCH CHIEF Aaron T. McCraw NRC FORM 591M PART 1 (07-2012)
4/23/2019 sf, } '"' v/
NRC FORM 591M PART 3 (07-2012)
10 CFR 2.201 U.S. NUCLEAR REGULATORY COMMISSION Docket File Information SAFETY INSPECTION REPORT AND COMPLIANCE INSPECTION 1. LICENSEE/LOCATION INSPECTED:
JAN X-Ray Services, Inc. d/b/a JANX P.O. Box 190 8550 E. Michigan Avenue Parma, MI 49269 REPORT NUMBER(S)
2019002 3. DOCKET NUMBER(S)
030-11772 6. INSPECTION PROCEDURES USED 87181 2. NRG/REGIONAL OFFICE 4. LICENSE NUMBER(S)
21-16560-01 Region III U.S. Nuclear Regulatory Commission 2443 Warrenville Road, Suite 210 Lisle, IL 60532-4352 5. DATE(S) OF INSPECTION April 9, 2019; Exit on April 23, 2019 7. INSPECTION FOCUS AREAS All SUPPLEMENTAL INSPECTION INFORMATION 1. PROGRAM CODE(S) 03320 2. PRIORITY 3. LICENSEE CONTACT William Reeve, RSO 4. TELEPHONE NUMBER (517) 531-8210 D Main Office Inspection D Field Office Inspection Next Inspection Date: April 9, 2019 [Z] Temporary Job Site Inspection 5242 E. Cork Street, Kalamazoo, MI PROGRAM SCOPE This was a routine, unannounced temporary job site inspection of a large non-destructive testing company authorized to use radioactive material for industrial radiography at numerous field stations and at temporary job sites throughout NRC jurisdictio The scope of this inspection was limited to observations of radiographic operations on the premises of a metal fabrication facility in Kalamazoo, Michiga The in-office review included a review of personnel monitoring equipment calibration records that were unavailable during the inspectio PERFORMANCE OBSERVATIONS The inspector observed the conduct of radiographic operations by the licensee's crew at the fabrication facility in Kalamazo The crew routinely worked in the evening at this site to minimize the potential for exposure to members of the public, as the workshop was heavily staffed during the day. The inspector noted the satisfactory set-up and control of various restricted area boundaries during these operations, as supported by independent and confirmatory surveys. The inspector also noted adequate compliance with physical presence requirements for radiographic operation Through interviews, the inspector found that the radiographer and his assistant were knowledgeable of radiation protection principles, licensee procedures, and regulatory requirement The inspector observed that the crew's dosimetry and survey instruments were calibrated, operable, and properly used. The inspector noted that radiographic exposure device used, a SPEC Model 150, was in good condition and properly labeled. While on the job site, the inspector reviewed the crew's shipping papers, utilization logs, and leak test documentation with no issues noted. No violations ofNRC requirements were identified as a result of this inspectio NRC FORM 591M PART 3 (07-2012)