ML081840474
| ML081840474 | |
| Person / Time | |
|---|---|
| Site: | North Anna |
| Issue date: | 07/02/2008 |
| From: | NRC/RGN-II |
| To: | Virginia Electric & Power Co (VEPCO) |
| References | |
| 50-338/06-302 | |
| Download: ML081840474 (42) | |
See also: IR 05000338/2006302
Text
Final Submittal(BluePaper)
N DF\Hi ANNA 2006-3 ()2.
1<0'We-\'tiesr'-(.)-ftC V\;tl v0.1.Administrative
JPMs:S[2-02.In-plant
JPMs-/-;/It3.ControlRoom
JPMs (simulator
JPMs)/Jh4.
NAPSAdmin-1APage1of10 REGION II INITIAL LICENSE EXAMINATION
JOB PERFORMANCE
MEASURE Admin-1A 1-PT-23, QUADRANT POWER TILT RATIO DETERMINATION
REVIEW CANDIDATE EXAMINER
NAPSAdmin-1APage2o f 10REGIONIIINITIALLICENSEEXAMINATION
JOB PERFORMANCE
MEASURE1-PT-23,QUADRANTPOWER
TILT RATIO DETERMINATION
REVIEWAlternatePath
- Yes , dete rminethatam ath e rror was performedFacilityJPM
- N/AKIARating(s):
Ge n2.1.23(3.9/4.0)015-A 1.0 4 (3.5/3.7)Task S tandard: 1-P T-23 isreviewe danddeterminedtohavea mathe rroronN-41lowerOPTR.PreferredEvaluationLocation
- Preferred Evaluation
Method: Perform_X_S imulate x Classroom_...:..:.-
Simulato r References
- 1-PT-23 , OUADRENT POWERTILTRATIODETERMINA
TION Validat ion Time:15min.T ime Critical: NO===========================
============================================
Candidate:
NAME T ime Start:_TimeFinish
- _Performance
Rating: SAT UNSAT_Performance
Time_Examiner:_NAME SIGNATURE DATE===================================================================================COMMENTS
N/A SIMULATOR OPERATOR INSTRUCTIONS:NAPSAdmin-1APage3of1 0
NAPSAdmin-1APage4of10 Tools/Equipment/Procedures
Needed:*1-PT-23, QUADRANT POWER TILT RATIO DETERMINATION
- CalculatorREADTO OPERATOR DIRECTION TO TRAINEE:Iwillexplaintheinitial
conditions,andstatethetasktobe
performed.Allcontrolroomstepsshallbe
performedforthisJPM, includinganyrequired
communications.Iwillprovideinitiatingcuesandreportson
otheractionswhen
directedbyyou.Ensureyou
indicatetomewhenyou
understand
your assignedtask.To indicatethatyouhave
completed your assignedtaskreturnthe
handout sheet I provided you.INITIAL CONDITIONS:*Reactorpowerisstableat100%
.*Theunitsupervisordesireda
hand-calculatedQPTRbeperformedonunit1.*TheUnit1OATChas
just completed 1-PT-23,QUADRENT POWER TILT RATIO DETERMINATION
up through step 4 of Attachment2,QPTRHand
Calculation.
INITIATING
CUES:Youaretoperformstep
5 of Attachment2,QPTRHand
Calculation.TIMECRITICAL
N/A
STARTTIME:
_NAPS Admin-1APage5of10STEP1:Verify
Current Read ingforupper channels.STANDARD: Verifies entered data matchesgivendataforall4upper
channels.-SAT COMMENTS:-UNSATSTEP2:VerifyExpected
Currentforupper channels.STANDARD: Verifies entered data matchesgivendatafora
ll4upperchannels.
-SAT COMMENTS:-UNSATSTEP3: Ver itymathforNo rmalized Currentforupper channels.STANDARD: Verif ies math performed prope rlyforall4 upper channels.-SAT COMMENTS:-UNSATSTEP4:VerifymathforQPTRforupper
channels.STANDARD:Verifiesmath
performed proper lyforall4upper
channels.-SAT COMMENTS:-UNSATSTEP6: Ver ify CurrentReadingforlower
channels.STANDARD: Ver ifies entered data matchesgivendataforall4lowerchannels.
-SAT COMMENTS:-UNSAT
STEP 7:VerifyExpectedCurrentforlowerchannels
.NAPSAdmin-1APaqe6of10 STANDARD: Verifiesentereddatamatchesgivendataforall4lowerchannels
.COMMENTS:_SAT_UNSAT STEP 8:VerifymathforNormalizedCurrentforlowerchannels
.STANDARD:Verifiesmathperformedproperlyforall4lowerchannels.
COMMENTS: STEP 9:VerifymathforQPTRforlowerchannels.STANDARD:Verifiesmathperformedproperlyforall4lowerchannelsanddeterm
inesN-41matherror.
COMMENTS:_SAT_UNSATCRITICALSTEP
_SAT_UNSATSTEP10: Determine incorrectmaximumQPTRwasrecorded
.CRITICAL STEPSTANDARD:Determinesthatbasedonthematherror
,theincorrectmaximumQPTRwasrecorded.
SAT COMMENTS:_UNSATSTEP11:Determineincorrectquadrantofmax
imumQPTRwasrecorded
.STANDARD:Determinesthatbasedonthematherror
,theincorrectquadrantofmaximumQPTRwasrecorded
.COMMENTS:CRITICALSTEP
_SAT_UNSAT
STEP12:DeterminesmaximumQPTRexceedsl
imitofTSlimits
.STANDARD:Determ
inesthatmaximumQPTRexceedsTSlimitof1.02andthatActionofTS3.4
.2 , Condition lA'applies.Calculatesthatpowermustbereducedto91
.0-92.7%.COMMENTS: END OF TASKTIMESTOP:_NAPSAdmin-1A
Paqe7of10CRITICALSTEP
SAT UNSAT
NAPS Admin-1APage8of10 KEYCorrectNumbers
CURRENT(UAMP):VERIFIEDBY:_EXPECTED100
%(UAMP):VERIFIEDBY:_
UPPERN41U=161.039 GOOD N42U=169.414GOOD
N43U=174.253GOOD
N44U=210.355 GOOD LOWERN41L=199.992GOOD
N42L=174.523GOOD
N43L=218.294GOOD
N44L=229.141GOOD
UPPERN41U=161.200 GOOD N42U=170.300GOOD
N43U=174.900GOOD
N44U=211.200 GOOD LOWERN41L=188.800GOOD
N42L=170.300GOOD
N43L=212.700GOOD
N44L=223.400GOOD
NORMALIZED
DETECTOR READINGTILTRATIOS
UPPERN41U=0.9990GOOD
N42U=0.9948GOOD
N43U=0.9963GOOD
N44U=0.9960 GOOD LOWERN41L=1.0593GOOD
N42L=1.0248GOOD
N43L=1.0263GOOD
N44L=1.0257GOOD
UPPERN41U=1.0025GOOD
N42U=0.9983GOOD
N43U=0.9998GOOD
N44U=0.9995GOOD
LOWERN41L=t;Q245 GOOD N42L=0.9911GOOD
N43L=0.9926GOOD
N44L=0.9920GOOD
DETECTORNOTINSERVICE(K0829):0Alldetectorsareinserv
ice.HIGHEST QUADRANTPOWERTILTRA
TIO:1.0245GOOD
KEY In-CorrectNumbers(N41lower
inverted)CURRENT(UAMP):VERIFIEDBY:
_EXPECTED 100%(UAMP):VERIFIEDBY
- _UPPERN41U=161.039GOOD
N42U=169.414GOOD
N43U=174.253 GOOD N44U=210.355GOOD
LOWERN41L=199.992 GOOD N42L=174.523GOOD
N43L=218.294GOOD
N44L=229.141GOOD
UPPER N41U=161.200 GOOD N42U=170.300GOOD
N43U=174.900GOOD
N44U=211.200GOOD
LOWERN41L=188.800 GOOD N42L=170.300GOOD
N43L=212.700GOOD
N44L=223.400GOOD
NORMALIZED
DETECTOR READINGTILTRATIOS
UPPERN41U=0.9990GOOD
N42U=0.9948GOOD
N43U=0.9963GOOD
N44U=0.9960 GOOD LOWERN41L=1.0593GOOD
N42L=1.0248 GOOD N43L=1.0263 GOOD N44L=1.0257GOOD
UPPERN41U=1.0025 GOOD N42U=0.9983GOOD
N43U=0.9998 GOOD N44U=0.9995GOOD
LOWER N41L=0.976 1:GOOD N42L=0.9911 GOOD N43L=0.9926 GOOD N44L=0.9920GOOD
DETECTORNOTINSERVICE(K0829):0
All detectorsareinservice
.HIGHEST QUADRANTPOWERTILTRATIO:
1.0025 GOOD
NAPSAdm in-1APage9of10 CRITICAL STEP EXPLANATIONS:
STEP#Explanation9Stepisnecessary,theoperatormustidentifythatmatherroroccurred(inverted
numbers).10Stepisnecessary
,theoperatormustidentifythatduetothematherror,theincorrectmaximumQPTRwasrecorded.
11Stepisnecessary,theoperatormustidentifythatduetothematherror,theincorrectquadrantofthemaximumQPTRwasrecorded.12Stepisnecessary,theoperatormustidentifythatTSlimitshavebeenexceededandidentifiesthecorrectAction.
NAPSAdm in-1 APage10of10
CANDIDATE CUE SHEET(TOBE RETURNED TO EXAMINER UPON COMPLETION
OF TASK)INITIAL CONDITIONS:*Reactorpowerisstableat100%.*Theunit supervisordesireda hand-calculatedQPTRbeperformedonunit1
.*TheUnit1 OATC has just completed 1-PT-23,QUADRENT POWER TILT RATIO DETERMINATION,upthroughstep
4 of Attachment2,QPTRHand
Calculation.
INITIATING
CUES:Youa retoperformstep
5 of Attachment
2, QPTR Hand Calculation.
TIME CRITICAL N/A CURRENT (UAMP): VERIFIED BY:_EXPECTED 100%(UAMP): VERIFIED BY:_UPPERN41U=161.039
GOODN42U=169.414 GOODN43U=174.253
GOODN44U=210.355 GOOD LOWER N41L=199.992 GOODN42L=174.523 GOODN43L=218.294 GOODN44L=229.141 GOOD UPPERN41U=161.200
GOODN42U=170.300 GOOD N43U=174.900 GOODN44U=211.200 GOOD LOWERN41L=188.800
GOODN42L=170.300 GOODN43L=212.700 GOODN44L=223.400 GOOD
NAPSAdmin-1 BPage1of8REGIONII INITIAL LICENSE EXAMINATION
JOB PERFORMANCE
MEASURE Admin-1B CALCULATE THE MAXIMUM ALLOWABLE REACTOR VESSEL HYDROGEN VENTING TIME CANDIDATE EXAMINER
NAPS Admin-1 BPage2of8REGIONIIINITIALLICENSEEXAMINATIONJOBPERFORMANCEMEASURECALCULATETHEMAXIMUM
ALLOWABLEREACTORVESSELHYDROGENVENTINGTIME
Alternate Path: No Facility JPM#: R-217 KIA Rating(s):G2.1.25(2.8/3.1)StandardsAllowableventtimecalculatedlAW
FR-1.3 ,Attachment1to
be1.52minutesor1m
inute31seconds(1
.47-1.57minutesacceptable).
Preferred Evaluation
Location: Preferred Evaluation
Method: Perform_X_Simulate X Simulator Classroom_-=--,-_References:
FR-1.3,ResponsetoVoidsinReactorVessel,Attachments1and2
,Rev.11.ValidationTime:15min.Time Critical: NO===================================================================================
Candidate:
NAMETimeStart:_TimeFin ish:_Performance
Rating:SATUNSAT_PerformanceTime_Examiner:_--------------_/_--
NAME SIGNATURE DATE==========================
==
=========
=
=========COMMENTS Tools/Equipment/Procedures
Needed:
NAPSAdmin-1 BPage3of8*FR-1.3,ResponsetoVoidinReactorVessel,attachments1and2
.*Calcula torREADTO OPERATOR DIRECTION TO TRAINEE:Iwillexplaintheinitial
conditions
,andstatethe
tasktobe performed.Allcontrolroomstepsshallbe
performedforthisJPM,includinganyrequired
communications
.Iwillprovideinitiatingcuesandreportsonotheractionswhen
directedbyyou.Ensureyouindicatetomewhenyou
understand
your assignedtask.To indicatethatyouhave
completed your assignedtaskreturnthe
handoutsheetI provided you.Initial Conditions*ASBLOCAhasoccurredonUn
it 1.*1-FR-1.3,ResponsetoVoids
inReactorVessel
,hasbeen implementedand
completed through subsequentstep21.*Containmen
tPressure-9psia.*Con ta inment Temperature-140°F.*H 2 Concentration-1.8%.*RCS Pressure-1500psig.InitiatingCues*Performstep22of
1-FR-1.3toca lcu late maximumallowablereactorvesse
lhydrogenventingt
ime.*Whenyoufinishtheactionsnecessarytoaccomplishthis,pleaseinformanexaminer.
NAPSAdm in-1 BPage4of8 Performance
Checklist Notes to the Evaluator.
- Taskcriticaleleme
ntsaredenotedbyanaster
isk (*).Ifsubstepsofacr
iticalelementalsohavean
asterisk (*),thenonlythoseasterisked substepsarecritical to performanceofthattaskelement.*Criticalstepsequencing
requirements
- 1&2(anyorder)before3;3&4(anyorder)before5.
START TIME:_*Step 1 DETERMINE CONTAINMENT
VOLUME (STP).CRITICAL STEP Standards a)Determines
containment
temperaturefromIn itial Conditions.
-SATb)Converts
containment
temperature
in ofto oR.(140°F+460=600 0R)c)Determines
containmentpressurefromInitia
l Conditions
.d)Inserts containment
pressure and oRintoformula.
- e)Determines
Containmentvolume(ref:9
.137x10 5CuFt).-UNSAT Evaluator's
Note**Thisstep is sequence critical.**Evaluator's
Comments*Step 2 DETERMINE MAXIMUM HYDROGEN VOLUMETOBEVENTED
.CRITICAL STEP Standards a)InsertsH 2concentrationand
containment
volumeintoformula.
-SAT*b)DeterminesmaxH 2volumetobevented(Ref:10964CuFt).
Evaluator's
Note**Thisstep is sequence critical.**-UNSAT Evaluator's
Comments
- Step 3DETERMINEHYDROGENFLOWRATEBASEDONRCSPRESSURE.
Standarda)ConsultsAttachment2todeterminehydrogenflowrate.b)DeterminesRCSpressurefromInitialConditions.
c)*BasedonRCSpressureof1500psig,determinesflowrate(Ref:7200
+/-100scfm).Evaluator's
Note**This step is sequence critical**Evaluator's
Comments*Step4CALCULATEMAXIMUMVENTINGTIME.
Standard 1.RecallsmaximumH
2volumetobeventedandinsertsintoformula.
2.RecallsH 2flowrateandinsertsintoformula
.*c)Calculatesventingperiodas1.52minutesor1minute31seconds(1.47-1.57minutesacceptab
le).Evaluator's
Note**This step is sequence critical.**Evaluator's
Comments NAPS Admin-1 BPage5of8 CRITICAL STEP_SAT_UNSAT CRITICAL STEP_SAT_UNSAT
Step6 REPORT TO NUCLEAR SHIFT MANAGER (EVALUATOR).
StandardVerbalstatusreport
made of task complet ion.STOP TIME:_Evaluator's
Comments NAPS Admin-1 BPage6of8___SAT___UNSAT
STEP#1 2 3 4 CRITICAL STEP EXPLANATIONS:
ExplanationRequiredto
calculate containment
volume.Requiredto
calculatevolumeof hydrogentobevented
.Requiredto
determineflowrate.Requiredto
calculateventingtime.
NAPS Admin-1 BPage7of8
NAPSAdmin-1 BPage8of8 CANDIDATE CUE SHEET(TOBE RETURNED TO EXAMINER UPON COMPLETIONOFTASK)Initial Conditions*A SBLOCAhasoccurredonUnit1.
- 1-FR-1.3, ResponsetoVoidsin Reactor Vessel,hasbeen implemented
and completed through subsequentstep21.*Containment
Pressure-9psia.*Containment
Temperature-140°F.*H 2 Concentration
-1.8%.*RCS Pressure-1500 psig.InitiatingCues*Performstep22of
1-FR-1.3tocalculate
maximumallowablereactorvesselhydrogenventing
time.*Whenyoufinishtheactions
necessary to accomplishthis,pleaseinformanexaminer.
NAPSAdm in-2Page1of8 REGION II INITIAL LICENSE EXAMINATION
JOB PERFORMANCE
MEASURE Admin-2O-PT-80AC SOURCES OPERABILITY
VERIFICATION
CANDIDATE EXAMINER
NAPSAdm in-2Page2o f 8REGIONIIINITIALLICENSE
EXAMINATION
JOB PERFORMANCE
MEASURE 0-PT-80ACSOURC ES OPERABILITY
VERIFICAT IONAlternatePath:
Yes , de termine surveillanceisunsat.FacilityJPM
- 'Adm in-10 0KIARating(s):GEN2.2.12(3.0/3.4)
Task Standard: Determinethat1H 4160vbusvoltageisoutofspecifications
low.PreferredEvaluationLocation:
Simulator X In-Plant_References:
0-PT-80"ACSOURCES OPERABILITY
VERIFICATION
" TS-3.8.1ValidationTime:15min.PreferredEvaluationMethod:
Pe rform_X_S imulate Time Critical: NO===================================================================================
Cand idate: NAME Performance
Rating:SATUNSAT_Examiner:_TimeStart:_TimeFinish:_Perfor mance Time_NAME SIGNATURE DATE========================================================
===========================COMMENTS
NAPSAdmi n-2Page3of8 SIMULATOR OPERATOR INSTRUCTIONS:1.Recall rc#2 2.Override meterfor1H Emergency Bus voltageto0.81,metershouldread
approx.4000 volts.
NAPSAdmin-2Page4of8 Tools/Equipment/Procedures
Needed: 0-PT-80"AC SOURCES OPERABILITY
VERIFICATION"READTO OPERATOR DIRECTIONTOTRAINEE:Iwillexplaintheinitial
conditions,andstatethetasktobeperformed.Allcontrolroomstepsshallbe
performedforthisJPM,includinganyrequired
communications.Iwillprovideinitiatingcuesandreportson
otheractionswhendirectedbyyou.Ensureyouindicatetomewhenyou
understandyourassignedtask.Toindicatethatyouhave
completedyourassignedtaskreturnthe
handoutsheetIprovidedyou.
INITIAL CONDITIONS:*Unit1isstableat100%power.
- 0-PT-80"AC SOURCES OPERABILITY
VERIFICATION" is scheduledtobe completedduringyourshiftforitsnormal
weekly surveillance.
- Attachment2,Unit2 Emergencybusseshas already been completed.
INITIATING
CUES:Youareto complete 0-PT-80"AC SOURCES OPERABILITY
VERIFICATION."TIMECRITICAL
N1A
STARTTIME:
_NAPS Admin-2Page5of8STEP1: Review" I n iti a l Conditions".STANDARD:Reviewssection3
.0.-SAT COMMENTS:-UNSATSTEP2: Review"PrecautionsandLimitations".STANDARD:Reviewssect
ion 4.0.-SAT COMMENTS:-UNSATSTEP3: Perform Attac hment 1 , Un it 1 EmergencyB uses.CRITICALSTEP
STANDARD: During performance
of complet ing attachment
determinesthat1H E mergencyBusvoltageisoutofspecifications
low.-SAT COMMENTS:-UNSA T S TEP 4: Perfor m Attachment2,Unit2 Emergency Buses.STANDARD: A lready performedperinitialcond
itions.-SAT COMM ENTS:-UNSATSTEP5: Perform Attachment 3 , Switchyard.STANDARD: Completes attachment.
-SAT COMMENTS:-UNSAT
NAPS Admin-2Pace6of8STEP6:Performsection7.1,"Acceptance
Criteria".CRITICALSTEP
STANDARD: Determinesthatstep7.1.1
cannotbesignedoff.
-SAT COMMENTS:-UNSATSTEP7:Performsection7.2,"Follow-On
Tasks".CRITICAL STEP STANDARD: DeterminesthatPTis UNSATandActionsofTS3.8.1,Condition'A'applies.Records1Hbusas
inoperableoncoversheetand
marks-SAT coversheet
UNSAT.COMMENTS:-UNSATSTEP8:Performsection7.3,"Completion
Notification".
STANDARD:InformsShift
Managerthatthetestis
completeandUNSAT.-SAT COMMENTS:-UNSAT END OF TASKTIMESTOP:_
CRITICAL STEP EXPLANATIONS:
STEP#Explanation3Requiredtodeterminethat1Hbusvoltageisbelowacceptablevalue.6Requiredtodeterminethattestisunsat.7Requiredtodetermineabilitytoapplycorrect
TSandLCO.NAPS Admin-2Page7of8
NAPS Admin-2Page8of8 CANDIDATE CUE SHEET(TOBE RETURNED TO EXAMINER UPON COMPLETION
OF TASK)INITIAL CONDITIONS:*Unit1isstableat100%power.
- 0-PT-80"AC SOURCES OPERABILITY
VERIFICATION" is scheduledtobe completedduringyourshiftforitsnormalweekly
surveillance.
- Attachment2,Unit2 Emergencybusseshas already been completed.
INITIATING
CUES:Youareto complete 0-PT-80"AC SOURCES OPERABILITY
VERIFICATION".
TIME CRITICAL N/A
CANDIDATE EXAMINER REGION II INITIAL LICENSE EXAMINATION
JOB PERFORMANCE
MEASURE Admin-3b ASSESS PERSONNEL EXPOSURE NAPS Admin-3b Page 1of8
NAPSAdmin-3bPage2of8REGIONIIINITIALLICENSE
EXAMINATION
JOB PERFORMANCE
MEASURE Task: Determine TEDE While WorkinginaHigh Airborne Area.Alternate Path: N/AFacilityJPM
- N/AKIARating(s):Gen2.3.4 (2.5/3.1)TaskStandard:
Determinesthatwearinga
respiratorwillresultinalowerdose.PreferredEvaluationLocation:
Preferred Evaluation
Method: Perform_X_Simulate x Simulator Classroom_-<->-_References:
Advanced Radiation Worker TrainingManualLevel2ValidationTime:
10 min.Time Critical: NO===================================================================================
Candidate:
NAME TimeStart:_TimeFinish:_PerformanceRating:SATUNSAT_Performance
Time_Examiner:-------------NAME SIGNATURE 1 DATE====================================
==
============
=
COMMENTS
NONE S IMULATOR OPERATOR INSTRUCTIONS:
NAPS Admin-3bPage3of8
NAPS Admin-3bPage4of8 Tools/Equipment/Procedures
Needed: CalculatorREADTO OPERATOR DIRECTIONS
TO STUDENT:Iwill expla intheinitial
conditions
,andstatethetasktobe
performed.Allcontrolroomstepsshallbe
performedforthisJPM
, includinganyrequired
communications.Iwill provide initiatingcuesandreportsonotheractionswhen
directedbyyou.Ensureyou
indicatetomewhenyou
understandyourassignedtask.Toindicatethatyouhave
completedyourassignedtaskreturnthehandoutsheetI
provided you.INITIAL CONDITIONS:*TheControlRoomhas
directedyoutoenteranareatoalign
several valves.*The estimateddoserateintheareais180
mRem/hr.An airborne contaminationconcernalsoexists.*Itisest imatedthatitwilltakeyou
approximately
25 minutes to complete the alignmentifyouweara
respirator.*Ifyoudo NOTweararespirator.the
alignmentwilltakeyouonly20
minutes ,butRadiationProtectionprojectsthatyourinternal
exposurewillbe8DAC-hrs.
INITIATING
CUE:Youareto determinewhetheryoushouldweararespiratortominim
izeyourtotal effective dose equivalent.
NAPS Admin-3bPage5of8Note:Candidatemay
perfonnthesestepsina
differentorder,however,the
calculated
dose should be correct.STARTTIME:
_STEP1: Determ inesinternalexposurewhilewearingarespirator.
STANDARD: DeterminesinternalexposuretobeZEROwhilewearingarespirator.
-SAT COMMENTS:-UNSATSTEP2: Determines
externalexposurewhilewearingarespirator.
CRITICAL STEP STANDARD: Calculate externalexposuretobe75mRemTEDEwhilewearinga
respirator.
-SAT180mRem/hrx1hr/60minx25min
=75mRem-UNSAT COMMENTS:STEP3: Determ ines TOTALexposurewhilewearingarespirator.
CRITICAL STEP STANDARD: Determ ines total exposuretobe75mRemwhilewearingarespirator.
-SAT omReminternal
+75mRem external=75mRemtotal
COMMENTS:-UNSATSTEP4:Determ
inesinternalexposurewhileNOTwearingarespirator.
CRITICAL STEP STANDARD: Determinesinternalexposuretobe20mRemwhilenotwearinga
-SAT respirator.2.5mRem/hrx8DAC-hrs.
=20mRem-UNSAT COMMENTS:
NAPS Admin-3bP6f8 aae 0STEP5: DeterminesexternalexposurewhileNOTwearingarespirator.
CRITICAL STEP STANDARD: Determines
externalexposuretobe60mRemTEDEwhilenotwearing
-SATarespirator.180mRem/hrx1hr/60minx20min
=60mRem-UNSAT COMMENTS:STEP6 Determines
TOTAL exposurewhileNOTwearingarespirato
r.CRITICALSTEP
STANDARD: Determines
total exposuretobe80mRemwhilenotwearinga
-SAT respirator.20mReminternal
+60mRemexternal
=80mRemtotal
-UNSAT COMMENTS: STEP?Determines
TOTAL exposurewhilewearinga
respirator
is LOWER than CRITICAL STEPwhilenotwearingarespirator.
-SAT STANDARD: Compares total exposures and determinesthatwearinga
respiratorresultsinalowertotalexposure
.COMMENTS:-UNSAT END OF TASKTIMESTOP:_
CRITICAL STEP EXPLANATIONS:
STEP#Explanation2&3Requiredtodeterminedosewithrespirator4,5,6Requiredtodeterminedosewithoutrespirator7Requiredtodeterminelowestdose
.NAPS Admin-3bPage7of8
NAPS Admin-3bPage8of8 CANDIDATE CUE SHEET(TOBE RETURNED TO EXAMINER UPON COMPLETION
OF TASK)INITIAL CONDITIONS:*TheControlRoomhas
directedyoutoenteranareatoalignseveral
valves.*Theest imateddoserateintheareais180
mRem/hr.An airborne contaminationconcernalsoexists
.*Itis estimatedthatitwilltakeyou
approximately
25 minutes to complete the alignmentifyouweara
respirator.*IfyoudoNOTweararespirator,the
alignmentwilltakeyouonly20minutes,butRadiationProtection
projectsthatyourinternal
exposurewillbe8DAC-hrs.
INITIATING
CUE:Youareto determinewhetheryoushouldweara
respirator
to minimizeyourtotal effective dose equivalent.
NAPS Admin-4Page1of7REGIONII INITIAL LICENSE EXAMINATION
JOB PERFORMANCE
MEASURE Admin-4 EPIP-1.01 EMERGENCY MANAGER CONTROLLING
PROCEDURE Determine highest EPIP classification.
CANDIDATE EXAMINER
NAPSAdmin-4Page2of7REGIONII INITIAL LICENSE EXAMINATIONJOBPERFORMANCEMEASUREClassifyanemergencyevent(EPIP-1.01)
.Alternate Path: Facility JPM#: KIA Rating(s):Gen2.4.29(2
.6/4.0)Task Standard:EventisclassifiedasaSiteAreaEmergency(SAE)perTABJ
.2 Preferred Evaluation
LOcation: Preferred Evaluation
Method: Simulate_X_Perform XSimulatorXClassroom
_-U.._References:
EPIP-1.01,"EMERGENCYMANAGERCONTROLLINGPROCEDURE,Rev.42.EMERGENCYACTIONLEVELTECHNICALBASISDOCUMENT,Rev.13.
Validation
Time:10min.Time Critical: NO============================================================================
=======Candidate:
NAMETimeStart:_TimeFinish
- _Performance
Rating:SATUNSAT_PerformanceTime
_Examiner:_NAME SIGNATURE/DATE======================
====
=============
==
==========Comments
SIMULATOR OPERATOR INSTRUCTIONS:
NONENAPSAdm in-4Page3of7
NAPSAdmin-4
Page 4 of 7 Tools/Equipment/Procedures
Needed: EPIP-1.01,"EMERGENCY
MANAGER CONTROLLING
PROCEDURE,Rev42.EMERGENCYACTIONLEVEL
TECHNICAL BASIS DOCUMENT ,Rev.13.READTO OPERATOR DIRECTIONS
TO STUDENT:Iw illexplaintheinitialconditions,andstatethetasktobe
performed.Allcontrolroomstepsshallbe performedforthisJPM
,includinganyrequired
communicat
ions.Iwill provide initiatingcuesandreportsonotheractionswhendirectedbyyou.Ensureyou
indicatetomewhenyouunderstandyourassignedtask.Toindicatethatyouhavecompletedyourassignedtaskreturn
the handoutsheetIprovidedyou.
INITIAL CONDITIONS:Units1&2were
operatingat100%powerwhena topped-out
non-licensed operator overpowered
asecurityoff
icerandtookhisweapon.
The operatorthenenteredthemaincontrolroomandorderedall
personneltoleave.Theoperatingcrewswereabletoperformthe
immediateactionsofAP-20,"OPERATIONFROMTHE AUXILIARY SHUTDOWN PANEL"priortoexitingthemaincontrolroomatt
ime 1414.Theoperatorsfromeachunit
assembledattheirrespectiveauxiliary
shutdownpanelsattime1416.
Progress inAP-20 has continuedwithauxiliary
feedwaterflowbeingthrottledattime1424and
pressurizerheatersenergizedattime1428
.Securityhasstagedofficersatallaccesspointstothemaincontrolroom.INITIATINGCUE:Youarerequestedtoclassifythe
emergencyeventand determine any Protective
Ac tion Recommendationifrequired.Assumeany support personnel designatedbythe procedure are performingasrequired.
STARTTIME:
_NAPSAdmin-4
Page 5 of 7STEP1: Determine the event categoryusingthe emergencyactionleveltableindex.
-SAT STANDARD:Eventis identifiedasa"Security" event.COMMENTS: UNSAT-STEP2:Reviewthe emergencyactionleveltab
associatedwiththe event category.SAT-STANDARD: Emergencyactionleveltabisreviewed.
COMMENTS: UNSAT-STEP3: Use available resourcestoobtain indications
of emergency conditions.
-SAT STANDARD: Conditionsarereviewed
.COMMENTS: UNSAT-STEP4:Verifythatan
emergencyactionlevelhasbeen
exceeded.CRITICALSTEP
STANDARD:Eventis classifiedasaSiteArea
emergency(SAE)perTABJ.2
.SAT-COMMENTS:-UNSAT END OF TASKTIMESTOP:_
NAPSAdmin-4Page6of7 CRITICAL STEP EXPLANATIONS:
STEP#Explanation4ThecandidateneedstobeabletoutilizetheprocedureanddeterminethataSiteAreaEmergency(SAE)needstobedeclared.
NAPS Admin-4Page7of7 CANDIDATE CUE SHEET(TOBE RETURNEDTOEXAMINERUPON
COMPLETIONOFTASK)INITIAL CONDITIONS:Units1&2were
operatingat100%powerwhena
topped-out
non-licensed
operator overpowered
a security officerandtookhisweapon.
The operatorthenenteredthemaincontrolroomandorderedall
personneltoleave.The operatingcrewswereabletoperformtheimmediateactionsofAP-20
,"OPERATIONFROMTHE AUXILIARY SHUTDOWNPANEL"priortoexitingthemaincontrolroomattime
1414.The operatorsfromeachunit
assembledattheirrespective
auxiliaryshutdownpanelsatt
ime 1416.ProgressinAP-20has
continued with auxiliary feedwaterflowbeing throttledattime1424and
pressurizer
heaters energizedattime1428
.Securityhasstagedofficersatallaccesspointstothemaincontrolroom.
INITIATING
CUE:Youarerequestedto
classify the emergencyeventanddetermineanyProtectiveAct
ionRecommendationifrequired.Assumeany support personnel designatedbytheprocedureareperform
ingasrequired
.