ML20086G215

ISI Summary Rept, for Clinton Power Station,

ML20086G215
Person / Time
Site:	Clinton
Issue date:	06/21/1995
From:	Korneman D, Weiss R ILLINOIS POWER CO.
To:
Shared Package
ML20086G197	List: ML20086G188 ML20086G215
References
NUDOCS 9507140167
Download: ML20086G215 (132)

Text

,

RCCL# 2E.240

./ 3

.g.

INSERVICE INSPECTION

SUMMARY

REPORT RF5 Prepared by:

A' L AI I b~E#*iS I S-2 0-9t~

c T

1

/ G - 2 o - 95 I h 95 A

I [D 0 f6

~

Nw' E-

/ $

'2.0 - 3 S

/

[

/%

&_7PXw I (- 2.o W

/

i f

' 20!95' Reviewed by:

hcs A &n f<n art

/

Director-Plant Engineering Date 9

d'/20/ fS Approved by: __ _ /

[d'A/

/

Manager-NSED Date Concurrence: D m.A0 O

= - Y /_ 6 / 2 I / 9 7 ANil

/ Date 9507140167 95071o PDH ADOCK 05000461 D

PDR l'

l j

is TABLE OF CONTENTS TITLE SECTION APPROVALS TABL E OF CONTENTS INTRODUCTION AND SCOPE.

1 NIS-1 CODE DATA REPORT.

2 o ABSTRACT OF EXAMINATIONS LISTING OF EXAMINATION AND TESTING PROCEDURES 3

LISTING OF EXAMINATION AND TESTING PERSONNEL..

4 LISTING OF EQUIPMENT AND MATERIALS 5

REPAIR AND REPLACEMENT 6

o LISTING OF REPAIRS / REPLACEMENTS PERFORMED o NIS-2 DATA REPORTS

..q V

Paga1 of 2 SECTION 1 INTRODUCTION AND SCOPE This Summary Report covers the Inservice inspection performed at Clinton Power Station (CPS), between December 10,1993 and April 29,1995. This is the first inspection performed during the third inspection period of the first ten (10)-year interval. During this Fuel Cycle, CPS experienced 2 planned outages and 6 forced outages. These planned outages were PO-5 and PO-6 and forced outages were FO-93-01, FO-94-01 A, FO-94-01B, MO-5, MO-6, and FO-95-01 for repairs. All examinations, tests, repairs and replacements were performed in accordance with the CPS ISI Program Manual which complies with ASME Section XI,1980 Edition through Winter 1981 Addenda.

The ASME Section XI examinations, tests and repairs / replacements were witnessed or venfied by Authorized Nuclear Inservice Inspectors W. Ruggles, R. Weiss, R. Riegler, and D. Mcdonald of Arkwright Mutual insurance Company (Factory Mutual Engineering Association). This summary report contains additional augmented (non-ASME Section XI) inspection results not required to be witnessed or venfied by the ANil.

In accordance with IWA-6220, the name and description of the components examined are listed on the NIS-1 Data Report and its attachments (see Section 2). Further component information is obtainable through the reference number, or other information, for the specific item. The manufacturers' names for the components examined are also identified in item 7 of the NIS-1 Data Report and their addresses are on file at CPS.

Documentation supporting this Summary Report is referenced in the Inservice Examination Plan, implementing p

procedures, or record files identified in the specific sections of this report.

Scope:

The scope of inservice inspection performed during this Fuel Cycle is summarized as follows:

l

• Preservice Examinations - Preservice examinations were performed on bolting associated with the main steam safety relief valves, feedwater check valves, and on various supports added to replace snubbers.

• Jet Pump Hold down Beams -In RF-5, Illinois Power replaced 19 of 20 jet pump hold down beams with materials having an improved heat treatment. A liquid penetrant test and ultrasonic examination was performed to ensure that there were no manufacturing flaws and to document the existing condition of beams. One jet pump hold down beam was replaced during RF-4, with the improved heat treated material.

• Scheduled inservice Examinations - The NIS-1 Data Report (Section 2) provides the listing of all examinations completed during RF-5. Conditions noted during RF-5 and corrective measures taken are described in the NIS-1 Data Report.

• Snubbers - The RF-4 Summary Report identified the number of Technical Specification snubbeis as 636.

During RF-5, Plant Modifications M-071 and M-073 were implemented which removed forty-nine (49) snubbers from the piping systems. This leaves 587 Technical Specification snubbers in the ISI Program. A l

representative sample of sixty-one (61) snubbers were selected for functional testing. All of these snubbers met l

the functional test acceptance enteria. The three (3) snubbers which failed during RF-4 were also tested.

These snubbers were all acceptable.

• Component Supports - One hundred twenty-eight (128) component supports, other than snubbers, were I

scheduled for visual examination for RF-5. One hundred four (104) supports were examined and found acceptable. Twenty-four (24) supports were deferred until RF-6.

Pzg3 2 cf 2 SECTION 1 INTRODUCTION AND SCOPE

• Pressure Tests - ASME Code Class 1 Components - A system leakage test and VT-2 inspection of ASME Code Class 1 components was successfully performed prior to plant startup. The Nuclear Regulatory Commission has authorized Illinois Power to use ASME Code Case N-498-1, in lieu of performing the Code-required hydrostatic pressure tests for Class 3 systems.

• Erosion / Corrosion Inspections - Ultrasonic (UT) wall thickness measurements were taken at 72 locations in 7 systems during RF-5. This included 48 first time inspection locations and 24 repeat inspections. Alllocations were analyzed and found acceptable with the exception of 6 items which were replaced as a prudent measure and one other item which required replacement due to a through wallleak.

• Repairs and Replacements - No repairs or replacements were required as a result of scheduled examinations.

The Nuclear Regulatory Commission has authorized Illinois Power to use ASME Code Case N-416-1, in lieu of performing the Code-required hydrostatic pressure tests for welded repairs or installation of replacement items by welding. Modifications as well as repairs and replacements which resulted from routine maintenance are specifically detailed in Section 6 of this report.

• See Section 1, Attachment 1, for a detailed breakdown of the current interval status.

• See Section 1, Attachment 2, for a graphical presentation of the interval status, radiation exposure, schedule i

performance and cost for inservice inspection.

i

Prga1 cf 5 SECTION 1 ATTACHMENT 1 CLASS 1 COMPONENT Required to be Examined During Required to be First 10-Year Examined During interval by Total First 10-Year Scheduled Section XI &

ASME Number Interval by During Various Augmented Category of WeldsSection XI RF-5 Requirements B-A 28 28 4

28 I

B-D 62 62 2

62 B-F 31 31 0

31 B-G-1 10 7

0 7

B-G-2 84 47 e

47 B-H 1

1 0

1 B-J 844 211*

59 423 B-K 1 40 31 6

31 B-L-2 2

2 0

1 B-M-2 60 24 0

24 B-N-1 1

1 0

1 B-N-2 8

8 1

8 B-N-3 0

0 0

0 B-O 1

1 0

1 i

TOTAL 117?,

454 eo 665

• 211 is 25% of 844 Number of welds / items NOT EXAMINED during RF5=16 Number of welds / items SUBSTITUTED during RF5=1 l

I Additional number of welds / items EXAMINED during RFS=2 Total number of welds / items in Classi EXAMINED during RF5=67 l'O l

6

Pigs 2 cf 5 SECTION 1 (J]

ATTACHMENT 1 CLASS 2 COMPONENT Required to be Examined During Required to be First 10-Year Examined During Interval by Total First 10-Year Scheduled Section XI &

ASME Number Interval by During Various Augmented Category ofWeldsSection XI RF-5 Requirements C-A 4

2 0

2 C-B 8

4 2

4 C-C 41 29 7

29 C-F 768 192*

24 256 C-G 39 25 4

25 TOTAL 860 252 37 316 O

• 192 is 25% of 768 i

I

'd Number of welds / items NOT EXAMINED during RF5=1 l

I Number of welds / items SUBSTITUTED and EXAMINED during RF5=1 Total number of welds / items in Class 2 EXAMINED during RF5=37 1

i

[(.)

PIga 3 cf 5 SECTION 1 ATTACHMENT 1 CLASS 1,2,3 COMPONENT SUPPORTS Required to be Examined During Required to be First 10-Year Examined During interval by Total First 10-Year Scheduled Section XI &

ASME Number Interval by During Various Augmented Category of SupportsSection XI RF-5 Requirements D-A 92 92 21 92 D-B 33 33 7

33 F-C 884 530 100 530 TOTAL 1009 655 128 655 Note: Snubber visual examinations and Functional Tests are not included in this table, this is allowed by Relief Request Number 4004 (Rev.1).

Number of welds / items NOT EXAMINED during RF5=24 l

Number of welds / items SUBSTITUTED and EXAMINED during RF5=0 Total number of welds / items EXAMINED during RF5=104 l

O

9 O

1 i

i s

TABLE 1 i

Total Number Required to be Required to be Completed Completed Completed Completed Completed ofitems Examined During Examined During During During During During During First 10-year First 10-year RF-5 RF-4 RF-3 RF-2 RF-1 Interval by interval by i

Section XI Section XI &

Various Augmented j

Requirements i

130 78 186 69 Class 1 1172 454 665 67

+

i Class 2 860 252 316 37 58 55 52 38 l

Visual Examination

}

of Integral Attach-100g 655 655 104 99 117 113 71 1

ments & Component Supports Total 3041 1361 1636 208 287 250 351 178 Note: Due to a counting error in the software program, some of the numbers do. sot match with the previous outages.

i S

i

^

3 i

2 s

k.

3 o

i i

-. _ - ~. - - - - -,

~

Prg3 5 of 5 i

@,~ 1 V

TABLE 2 l

% Completed Per Section XI &

Number

% Completed Per Various Augmented l

Outage Completed Section XI Requirements l

l RF-1 178 13 11 RF-2 351 26 21 RF-3 250 18 15 RF-4 287 21 18 RF-5 208 15 13 RF-6 Total 1274 94 78 Note: Due to a counting error in the software program some of the numbers do not match with the previous outages.

f 8 N

r j

,s'

0 0

0 ISI INTERVAL STATUS SECTION XI SECTION XI &

AUGMENTED REMAINING

[

6%

REMAINING RF-1 RF-1 N

E.

.m

-fde+c st

flpWL RF-5 NR '

'

22%

$%~

- ex:.

hl$,Q%

s; :

c

R p

~

RF-2 RF-2 RF-5 RF-4 RF-3 RF-3 RF-4 0 RF-1 0 RF-2 O RF-3 0 RF-4 0 RF-5 0 REMAINING SECTION 1 ATTACHMENT 2 Pagel

8 O

O l

ISI COST COMPARISON l

l 4

l I

w l

3-i c

o s

2 j

-m i

a O

i O

1 1

0 l

y

.,s

,s 5

s s

s s

^

l RF-1 RF-2 RF-3 RF-4 RF-5

(

l INCLUDES INSPECTION AND PIPEFITTER COSTS I

SECTION 1 ATTACIIMENT 2 PAGE 2

8 8

e isi scasoute eenvousince comeinison (NDE, SNUBBER TESTS, FAC) 450-400

/

350-g-

300--

d 250-m

{200-

- RF-2 RF-3

< 150--

RF-4

- RF-5 100-50-i/Y 0

WEEK WEEK WEEK WEEK WEEK WEEK WEEK WEEK WEEK WEEK WEEK WEEK WEEK 1

2 3

4 5

6 7

8 9

10 11 12 13 OUTAGE WEEK SECTION 1 ATTACIIMENT 2 Page3

Page 1 cf 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTIONS As Required by the Provisions of the ASME Code Rules

(

1. Owner lilinois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727 (Name and Address of Owner)

2. Plant Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727 (Name and Address of Plant)

3. Plant Unit 1

4. Owner Certificate of Authorization (if required)

N/A

5. Commercial Service Date 4/24/87

6. National Board Number for Unit _

N/A

7. Components inspected an" Component or Manufacturer State National ns r

Appurtenance or Installer Serial No.

Number Board No.

Reactor Vessel 1813-D003 Chicago Bridge & tron Co.

B5225 B00505 4442 RHR Pump 1E12-C002A Byron Jackson 741-S-1448 N/A N/A LPCS Pump i

1E21-C001 Byron Jackson 741-S-1451 N/A N/A HPCS Pump 1E22-C001 Byron Jackson 731-S-1186 N/A N/A RCIC Pump 1E51-C001 Bingham 4Villamette Co.

16210287 N/A NBS50 Valve 1833-F067A Anchor / Darling Valve Co.

E5834-2-1 N/A N/A Valve 1E12-F042C Anchor / Darling Valve Co.

E-6214-142-1 N/A N/A Valve 1E21-F005 Anchor / Darling Valve Co.

E-6214-6-1 N/A N/A Valve 1E22-F005 Anchor / Darling Valve Co.

E-6214-21-1 N/A N/A Piping Systems lilinois Power Co.

See Note i N/A N/A 1

Note 1: The piping components examined / tested are listed in Attachment 1 of this NIS-1 Data Report.

Note: Supplemental sheets in form of lists, sketches, or drawings may be used, provided (1) size is 81/2 in. x 11 in.

i (2) Information in items 1 through 6 on this report is included on each sheet, and (3) each sheet is numbered and i

the number of sheets is recorded at the top of this form.

FORM NIS-1 (Back)

8. Examination Dates 10/10/93 to 04/29/95

9. Inspection Intervalfrom 04/24/87 to 04/24/97

10. Abstract of Examinatons. Include a list of examinations and a statement concerning status of work required for current interval.

See Attachment 1

11. Abstract of Conditions Noted.

See Attachment 2

12. Abstract of Corrective Measures Recommended and taken.

See Attachment 2 We certify that the statements made in this report are correct and the examinations and corrective measures taken conform to the rules of the ASME Code Section XI.

Certificate of Authorization No. (if applicable)

N/A Expiration Date N/A Date u n e 2.0 19 T Signed lilinois Power Co.

B I

nw&

Owner CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of lilinois and employed by of Massachusetts have inspected the components described in this owners report during the period 10/10/93 to 04/29/95

. and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this owners Report in accordance with the inspection plan and as required by the ASME Code,Section XI.

By signing this certificate neither the inspector nor his employer makes any warranty, expressed or implied, conceming the examinations and corrective measures described in this owners Report.

Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection.

%Alb Commissions rLL /296 Inspectors Signature National Board, state, province, and endorsements Date uur 20

.19E

/

• Arkwright MutualInsurance (Factory Mutual Engineering Association)

P:ga 2 of 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1 n

h

1. Owner: lilinois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4 24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations:

Listing of Examinations:

Table 1 lists scheduled examinations of components for RF-5. The results column in the table provides further explanation for these examinations. Those items which were examined that require no further evaluation are identified as acceptable. Some items were deferred to later outages for various reasons and the new examination schedule for these items is identified. Some items were substituted for other items and the substituted reference number is identified. These substituted items are listed in Table 2. Also listed in Table 2 are several piping welds / items added to the RF-5 scope for various reasons and examined.

Table 3 lists scheduled usual examinations of component supports and functional tests of snubbers. The results column in the table provides further explanation for these examinations / tests. Those items which were examined / tested that require no further evaluation are identified as acceptable. Some items were deferred to later outages for various reasons and the new examination schedule for these items is identified. The visual examination results of all snubbers were acceptable. One snubber was substituted for another snubber and the substituted

(

snubber number is identified. The substituted snubber is listed in Table 4.

Table 5 lists scheduled pressure tests. The results column in the table provides further explanation for these tests.

Table 6 lists scheduled erosion / corrosion examinations. The results column in the table provides further explanation for these examinations. Listed in Table 7 are several inspection locations added due to the through wall leak on line 1GS15B-6. The results column in the table provides further explanation for these examinations.

Current interval Status:

During the fifth refueling outage (RF-5),15% of the required examinations during the first ten year interval were completed. Cumulatively at the end of RF-5,94% of all required examinations have been completed in accordance with IWA-2400 (Inspection Program B) for the first ten year interval. The calculation does not include system pressure tests or snubber visual examinations and functional tests which have specific requirements for completion during specific inspection periods and refueling outages.

During the first four refueling outages (RF-1, RF-2, RF-3 and RF-4) twenty (20) items were identified as requiring further action. These items are identified as HEA-1, RHR-A-2, LPCS-2,1-RH-16-10-2, HPCS-2,1-MS-A-7PR-WA, RPV-3A, N1B, N2B, N2C, N2D, N2E, N48, N4C, N6B, N6C, N10, N16, CH-C-2 and 1-RR-A-19. There was an error in RF-4 Summary Report regarding number of items identified during RF-4 requiring further action. The correct number is 14 instead of 7. Therefore, at the end of RF-4 there were a total of twenty (20) items requiring further evaluation. These items were partially examined. In this summary report (RF-5) there are six (6) items requiring further action. Therefore, currently there are a total of twenty-six (26) items that have been partially examined and will require further evaluation prior to the end of the first ten (10)-year inspection interval.

O (V

PIge 3 cf 27 l

FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1 Q

TABLE 1

)

1 Owner: tilinois Power Company, P. O. Box 678, RL 54E.. Clinton. IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton. IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A j

I

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Scheduled Examinations REFERENCE ITEM EXAM CODE CODE CODE RESULTS NUMBER IDENTIFICATION TYPE ITEM CATEGORY CLASS 000900 RPV-MA UT B1.22 B-A 1

DEFERRED TO RF-6 000950 RPV-MB UT B1.22 BA 1

DEFERRED TO RF-6 1

007500 CLOSURE STUDS MT/UT B6.30 B G-1 1

ACCEPTABLE 007550 CLOSURE NUTS NT B6.10 B-G-1 1

ACCEPTABLE 008100 VESSEL INTERIOR VT-3 B13.10 B-N-1 1

ACCEPTABLE 008250 STEAM DRYER (BOTTOM 1/2)

VT-3 N/A N/A 1

SEE NOTE 1 008350 FEEDWATER SPARGERS WELDED ATTACHMENTS VT-3 B13.21 B-N-2 1

ACCEPTABLE 008555 RPV SPECIMEN BRACKET WELDED ATT.

VT-1 B13.20 B-N-2 1

ACCEPTABLE 008556 JET PUMP BRACE ARM WELDED ATTACH (1/3)

VT-1 B13.20 B-N 2 1

ACCEPTABLE 008557 JET PUMP COMPONENTS (1/3)

VT-3 N/A N/A 1

ACCEPTABLE 008650 CORE SUPPORT STRUCTURE VT 3 B13.22 B-N 2 1

ACCEPTABLE 009300 CH-ME UT B1.22 B-A j

ACCEPTABLE 009350 CH-MF UT B1.22 B-A 1

ACCEPTABLE 009500 N8 UT B3.90 BD 1

ACCEPTABLE 009650 N8-!RS UT B3.10 BD 1

ACCEPTABLE 009800 1

MT/UT B9.11 B-J 1

ACCEPTABLE 009950 4

MT/UT B9.11 B-J 1

SEE NOTE 2 100220 1-MS-A-4 MT/UT 89.11 B-J 1

ACCEPTABLE 1

100760 1-MS-A-9 MT/UT B9.11 BJ 1

ACCEPTABLE i

101020 1-MS-ASA-1 FB VT 1 B7.50 B G-2 1

ACCEPTABLE 1

101220 1-MS-ASB 1-FB VT-1 B7.50 BG2 1

ACCEPTABLE 102000 1-MS-B-6/BSE MT/UT B9.31 B-J 1

ACCEPTABLE 104180 1-MS-C-6/CSD MT/UT 89.31 B-J 1

ACCEPTABLE 1

104440 1-MS-C-8PR-WA PT B10.10 B K-1 1

ACCEPTABLE SEE NOTE 4 104460 1-MS-C-9-Lui MT/ui B9.12 B-J 1

SEE NOTE 5

l L

Pcge 4 of 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1 TABLE 1

1. Owner Illinois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A l

l

10. Abstract of Examinations: Listing of Scheduled Examinations l

REFERENCE ITEM EXAM CODE CODE CODE RESULTS NUMBER IDENTIFICATION TYPE ITEM CATEGORY CLASS 104480 1-MS-C-9-LUO MT/UT 89.12 B-J 1

SEE NOTE 5 104500 1 MS-C-9 MT/UT B9.11 B-J 1

ACCEPTABLE 105420 1-MS-Cso-1-FB VT-1 B7.50 B-G-2 1

ACCEPTABLE 105820 1-MS-CSF-1-FB VT-1 B7.50 B-G-2 1

ACCEPTABLE 106680 1-MS-D-7PR-WA MT B10.10 B-K-1 1

SEE NOTE 4 106840 1-MS-D-11 MT/UT B9.11 BJ 1

ACCEPTABLE 107220 1-MS-DSB 1-FB VT 1 B7.50 B-G-2 1

ACCEPTABLE 111300 1 FW-2-5 MT/UT B9.11 8-J 1

ACCEPTABLE SEE NOTE 3 112800 1-FW-1-3-7 MT/UT B9.11 BJ 1

ACCEPTABLE 114340 1-FW-1 1-3 MT/UT B9.11 B-J 1

ACCEPTABLE 120180 1-NB-1 2-701 MT/UT B9.11 B-J j

ACCEPTABLE 130120 1-RR-AM-2 LU PT/UT B9.12 BJ 1

t'E NOTE 5 l

130140 1-RR-AM 2 PT/UT B9.11 B-J 1

ACCEPTABLE 133800 1-RR BJ-Al PT/UT 89.11 B*J 1

ACCEPTABLE 133850 1-RR-BJ-A1-LD PT/UT B9.12 BJ 1

SEE NOTE 5 134980 1-RR-A PR-1-WA PT B10.10 B K-1 1

SEE NOTE 8 135300 1-RR-A 9-LUI PT/UT B9.12 BJ 1

SEE NOTE 5 135320 1-RR A-9-LUO PT/UT B9.12 BJ 1

SEE NOTE 5 l

135340 1 RR A-9 PT/UT B9.11 BJ 1

DEFERRED TO RF-6 i

135400 1 RR A 10/DRW PT/UT B9.31 B-J 1

ACCEPTABLE 136440 1-RR-A-DRW-2-FB VT-1 B7.50 B-G-2 1

ACCEPTABLE 137420 1-RR-B 12 PT/UT 89.11 BJ 1

DEFERRED TO RF-6 137440 1-RR-B-12-LD PT/UT 89.12 BJ 1

SEE NOTE 5 141160 1-LP-1 4 MT/UT 89.11 B-J 1

ACCEPTABLE I

N 141260 1-LP-1-6 MT/UT 99.11 B-J 1

ACCEPTABLE

i L

l P:ge 5 cf 27 l

l-FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION l

ATTACHMENT 1

~j TABLE 1 l

1. Owner; lilinois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727 l

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

]

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A i

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Scheduled Examinations j

KEFERENCE ITEM EXAM CODE CODE CODE RESULTS NUMBER IDENTIFICATION TYPE ITEM CATEGORY CLASS 141280 1-LP 1-6-2 MT/UT B9.11 B-J 1

ACCEPTABLE 141340 1-LP 1 7-4 MT/UT 89.11 B-J 1

SUBSTITUTED BY REF. NO. 141360

)

151140 1-HP-5-4 MT/UT 89.11 B-J 1

ACCEPTABLE 151300 1-HP-5-6 2 MT/UT 89.11 BJ 1

ACCEPTABLE 151420 1 HP-5-7 4 MT/UT 89.11 BJ 1

ACCEPTABLE 151620 1-HP 5-9-2 MT/UT B9.11 B-J 1

ACCEPTABLE 161300 1-RH-18-3 4 MT/UT 99.11 B-J 1

ACCEPTABLE 161890 1 RH-23-3 8 MT/UT 89.11 BJ 1

ACCEPTABLE 162180 1 RH-23-6-3 MT/UT 89.11 B-J 1

ACCEPTABLE 163060 1-RH-12-2 MT/UT 89.11 B-J 1

ACCEPTABLE 163120 1-RH-12-2-401 MT/UT 89.11 B-J 1

ACCEPTABLE 163480 1-RH-12-4A-4 MT/UT 89.11 B-J 1

ACCEPTABLE 163555 1-RM-12-5-7 MT/UT 89.11 BJ 1

ACCEPTABLE 163660 1-RH-12-6-3 MT/UT B9.11 B-J j

ACCEPTABLE 163780 1-RH-12-7 MT/UT B9.11 B-J j

ACCEPTABLE 163950 1 RM-12-8-8 MT/UT B9.11 B-J 1

ACCEPTABLE 164040 1-RH-12-10Q1 MT/UT B9.11 B-J j

ACCEPTABLE 164320 1-RM-12-15 MT/UT B9.11 BJ 1

DEFERRED TO RF 6 1

164380 1-RH-12-13-3 MT/UT 89.11 B-J 1

ACCEPTABLE 165040 1 RH-20-3 MT/UT B9.11 BJ 1

ACCEPTABLE 165700 1-RH 37-6 MT/UT B9.11 B-J 1

ACCEPTABLE 180060 1 RI 13-6-4 MT/UT B9.11 B-J 1

ACCEPTABLE 180340 1 RI-13-8-2 MT/UT B9.11 BJ 1

ACCEPTABLE 180440 1-RI-10011v-WA MT B10.10 B-K-1 1

SEE NOTE 6 180660 1-RI 14-202 MT/UT B9.11 BJ 1

ACCEPTABLE

P:gs 6 cf 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION l

ATTACHMENT 1

~

(* O TABLE 1

1. Owner Illinois Power Company, P. O. Box 678, Rt. 54E., Clintor., IL 61727 l

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727 f

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A i

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A l

10. Abstract of Examinations: Listing of Scheduled Examinations REFERENCE ITEM EXAM CODE CODE CODE RESULTS NUMBER IDENTIFICATION TYPE ITEM CATEGORY CLASS 180900 1 R!-14-401 HT/UT 89.11 BJ 1

ACCEPTABLE 180940 1-RI-14 4-2 MT/UT B9.11 B-J 1

DEFERRED TO RF-6 181080 1 RI-14-5A MT/UT 89.11 B-J 1

ACCEPTABLE 181160 1-RI-14 6 MT/UT 89.11 B-J 1

ACCEPTABLE 181260 1-RI-14-7-6 MT/UT B9.11 B-J 1

ACCEPTABLE 181760 1-RI-1 3-3 MT/UT B9.11 B-J j

ACCEPTABLE 181820 1-R!-1-5Q1 MT/UT B9.11 B+J 1

ACCEPTABLE 1

181940 IMC-43A MT B10.10 B-K-1 1

ACCEPTABLE 182020 1-RI-13-1 MT/UT B9.11 BJ 1

ACCEPTABLE 182160 1-RI 13-3Q2 MT/UT B9.11 B-J 1

ACCEPTABLE 182400 1 RI-13-601 MT/UT 89.11 B-J 1

ACCEPTABLE 200560 SHOCK SUPPRESSoR LUCS; NoS. 1 THRU 4 PT B10.20 B K-1 1

DEFERRED TU RF 6 230680 1833 F067A VT 1 B7.70 B-G-2 1

ACCEPTABLE 231040 1E22-F005 VT-1 B7.70 B-G-2 1

ACCEPTABLE 400100 HEA-3 MT/UT C2.21 C-B 2

ACCEPTABLE 400110 HEA-3 1RS UT C2.22 C-B 2

ACCEPTABLE 400200 NEA-1 THRU WA MT C3.10 C-C 2

ACCEPTABLE 500650 1-MS-37 4 MT/UT C5.21 C-F 2

ACCEPTABLE 500940 1-MS-37-2 MT/UT C5.21 C-F 2

ACCEPTABLE 510060 1-FU-1 12 MT/UT C5.21 C-F 2

ACCEPTABLE 550000 1-LP-2-1 4 MT C5.11 C-F 2

ACCEPTABLE 550180 1+LP-2 10A MT C5.11 C-F 2

ACCEPTABLE 550460 1-LP 2-13 MT C5.11 CF 2

ACCEPTABLE

]

552040 1-LP-2-17-2 MT C5.11 C-F 2

ACCEPTABLE j

k 560340 1-HP-1-8-8 MT/UT C5.21 C-F 2

ACCEPTABLE

- ~,.

r Pcgr 7 ef 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1

/~'

(:

TABLE 1

1. Owner tilinois Power Company, P. O. Box 678 Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Scheduled Examinations REFERENCE ITEM EXAM CODE CODE CODE RESULTS NUMBER IDENTIFICATION TYPE ITEM CATEGORY CLASS 562560 1-HP-1-7-6 MT/UT c5.21 c-F 2

ACCEPTABLE 571300 1 RH-8-13 MT c5.11 C-F 2

ACCEPTABLE 571760 1-RH-8-8-2 MT C5.11 cF 2

ACCEPTABLE 574780 1 RH-17-2-5 MT/UT C5.11 c-F 2

ACCEPTABLE 577360 1-RH-21-16 MT C3.20 c-c 2

ACCEPTABLE 580710 1-RH-38-1D MT c5.11 c-F 2

ACCEPTABLE 581370 1-RH-8-22A01 MT c5.11 cF 2

ACCEPTABLE 582500 1-RH-8-7 MT c5.11 cF 2

ACCEPTABLE u

583420 1RH07018V-WA MT C3.20 c-c 2

ACCEPTABLE 584800 1 RH-25-16-3 MT C5.11 cF 2

ACCEPTABLE 585320 1-RH-25-22 MT/UT c5.21 c-F 2

ACCEPTABLE

'594121 1RH07072S WA MT c3.20 c-C 2

ACCEPTABLE 595940 1-RH-27-9 MT/UT c5.21 c-F 2 ' ACCEPTABLE 598140 1-RH-30-1-2 MT C5.11 c-F 2

ACCEPTABLE 598200 1RH22001A-WA MT C3.20 cc 2

ACCEPTABLE 599360 1-RH-21-9A MT c3.20 cc 2

ACCEPTABLE 610740 1-RI-9-4-3 MT/UT c5.21 c-F 2

ACCEPTABLE 611500 1-RI-3-1A-2 MT c5.11 c-F 2

ACCEPTABLE 613200 1-RI-3-3-3 MT c5.11 C-F 2

SUBSTITUTED BY REF. NO. 613240 614320 1-SD-270-31 MT/UT c5.21 cF 2

ACCEPTABLE 614360 1-SD-270-35 MT/UT C5.21 c-F 2

ACCEPTABLE 800180 RHR-A 5 MT C6.10 c-0 2

ACCEPTABLE 801580 LPCS-5 MT c6.10 c-G 2

ACCEPTABLE 802580 HPCS-5 MT C6.10 cG 2

ACCEPTABLE k

803300 RCIC-3 MT C6.10 c-c 2

ACCEPTABLE

Pags 8 cf 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1 (O

TABLE 1 V

1. Owner: tilinois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Scheduled Examinations REFERENCE ITEM EXAM CODE CODE CODE RESULTS NUMBER IDENTIFICATION TYPE ITEM CATEGORY CLASS 803600 Reic-1A (1-4)

MT c3.30 c.c 2

SEE NOTE 7 O

o

Pcg)9 cf 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION j

ATTACHMENT 1 TABLE 1 NOTES

1. Owner: lilinois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727 i

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Scheduled Examinations Note 1:

A visual examination of the pre-existing crack in drain channel #8, weld V-16, indicated no measurable growth. The crack starts from the bottom end of the weld and extends about 7 5/8" upward.

I Note 2:

l The ultrasonic examination resulted in only partial coverage due to configuration and geometry. This is pending further evaluation. The Magnetic Particle examination was acceptable.

Note 3:

No ultrasonic examination was performed downstream due to the proximity of a pipe clamp or upstream due to the j

valve configuration. The Magnetic Particle examination was limited to 55.88% of the required examination area.

l Due to the complexity associated with hanger removal / reinstallation, a relief request will be submitted prior to RF-6 to accept the limited examination.

Note 4:

The Magnetic Particle examination was limited to 27% of the required examination area due to proximity of the pipe support configuration. A relief request will be submitted prior to RF-6 to accept the limited examination.

l Note 5:

l These examinations were deferred to RF-6 pending the submittal and approval of a relief request to utilize ASME Code Case N-524.

Note 6:

Welded attachment 1Rl10011V-WA does not physically exist and will be deleted from the ISI Program.

Note 7:

The Magnetic Particle examination was limited to 84.09% of the required examination area due to the proximity of the support configuration. A relief request will be submitted prior to RF-6 to accept the limited examination.

Note 8:

The Liquid Penetrant examination was limited to 65.28% of the required examination area due to the proximity of the

(

pipe support configuration. A relief request will be submitted prior to RF-6 to accept the limited examination.

Paga 10 cf 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1

~

TABLE 2

1. Owner: lilinois PowM Company, P. O. Box 678. Rt. 54E., Clinton, IL 61727

2. Plant:. Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Substituted and Additional Examinations REFERENCE ITEM EXAM CODE CODE CODE RESULTS NUMBER IDENTIFICATION TYPE ITEM CATEGORY CLASS 141360 1-LP-1-7-3 MT/UT 89.11 6-J 1

ACCEPTABLE 250940 1E12 F042C VT 3 B12.50 B M-2 1

ACCEPTABLE 250960 1E21-F005 VT-3 B12.50 B-M-2 1

ACCEPTABLE 613240 1-RI-3 3-2 MT C5.11 C-F 2

ACCEPTABLE b

}

Pcg311 cf 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION 1

ATTACHMENT 1 g

TABLE 3

1. Owner; lilinois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

' 3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Sch.og/ Visual Examinations / Functional Tests of Component Supports

~

REFERENCE ITEM EXAM CODE CODE CODE RESULTS NUMBER IDENTIFICATION TYPE ITEM CATEGORY CLASS 903755 1FWC2008C VT3 F3 F-C 1

ACCEPTABLE 947680 1FWO3014S VT3/FT N/A N/A D

ACCEPTABLE 922015 1H302A VT3 F3 FC 1

ACCEPTABLE 922260 1H353A VT3 F3 F-C 1

ACCEPTABLE 922265 1H354A VT3 F3 F-C 1

ACCEPTABLE 906010 1HP01007A VT3 F3 F-C 1

ACCEPTABLE 906190 1HP03036X VT3 F3 FC 2

ACCEPTABLE 906205 1HP03039V VT3 F3 F-C 2

ACCEPTABLE 4 (t 947840 1HP03042S VT3/FT N/A N/A D

ACCEPTABLE J,

906680 1HP03049S VT3/FT N/A N/A 2

ACCEPTABLE 903888 1Ho04003S VT3/FT N/A N/A 2

ACCE'PTABLE 903894 1HPO4022S VT3/FT N/A N/A 2

ACCEPTABLE 906280 1HP08006S VT3/FT N/A N/A 2

ACCEPTABLE 906718 11S01014S VT3/FT N/A N/A 2

ACCEPTABLE 4

906694 11S01020S VT3/FT N/A N/A 2

ACCEPTABLE t

906696 11501022S VT3/FT N/A N/A 2

ACCEPTABLE 906710 11$01027S VT3/FT N/A N/A 2

ACCEPTABLE 906722 11S01040s VT3/FT N/A N/A 2

ACCEPTABLE 906714 11S01053S VT3/FT N/A N/A 2

ACCEPTABLE i

906748 11S01075S VT3/FT N/A N/A 2

ACCEPTABLE 908035 1LP02001G VT3 F3 F-C 1

ACCEPTABLE 908040 1LP02002X VT3 F3 F-C 1

ACCEPTABLE 906756 1LP03016S VT3/FT N/A N/A 2

ACCEPTABLE a'

908320 1LPO4005X VT3 F3 F-C 2

ACCE PT ABLE Q) f 908380 1LPO4030X VT3 F3 F-C 2

ACCEPTABLE

Pag)12 cf 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1 TABLE 3

1. Owner: I!!inois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-2447

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Scheduled Visual Examinations / Functional Tests of Component Supports REFERENCE ITEM EXAM CODE CODE CODE RESULTS NUMBER IDENTIFICATION TYPE ITEM CATEGORY CLASS 908500 1LPO4037X VT3 F3 FC 2

ACCEPTABLE 948220 1Ms07032s VT3/FT N/A N/A D

ACCEPTABLE 947940 1Ms07041s VT3/FT N/A N/A D

ACCEPTABLE 947980 1Ms07044s VT3/FT N/A N/A D

ACCEPTABLE 910035 1MS210085 VT3/FT F3 F-C 3

ACCEPTABLE 910050 1MS21013C VT3 F3 FC 3

ACCEPTABLE 910052 1MS21013C-WA VT3 D1.20 D-A 3

ACCEPTABLE 910255 1Ms2101&A VT3 F3 F-C 3

DEFERRED TO RF-6 p

910256 1MS21018A-WA VT3 D1.20 DA 3

DEFERRED TO RF 6 910340 1Ms22012C VT3 F3 F-C 3

ACCEPTABLE 910342 1MS22012C-WA VT3 D1.20 DA 3

ACCEPTABLE 910560 1MS22017A VT3 F3 F-C 3

DEFERRED TO RF-6 910561 1MS22017A-WA VT3 D1.20 D-A 3

DEFERRED TO RF-6 910780 1MS25006s VT3/FT F3 F-C 3

ACCEPTABLE 910833 1MS25012A VT3 F3 FC 3

DEFERRED TO RF-6 910834 1MS25012A WA VT3 D1.20 DA 3

DEFERRED TO RF-6 i

910135 1MS26002C VT3 F3 F-C 3

ACCEPTABLE 910165 1MS26008s VT3/FT F3 F-C 3

ACCEPTABLE 910275 1MS26011A VT3 F3 F-C 3

DEFERRED TO RF 6 910276 1MS26011A-WA VT3 D1.20 0-A 3

DEFERRED TO RF 6 910278 1MS26013x VT3 F3 F-C 3

DEFERRED TO RF 6 910280 1MS26014X VT3 F3 F-C 3

DEFERRED TO RF-6 910445 1MS27006X VT3 F3 F-C 3

ACCEPTABLE j

i 910450 1MS27007K VT3 F3 F-C 3

ACCEPTABLE f))

910452 1MS27007X-WA VT3 D1.20 D-A 3

ACCEPTABLE

Pzg313 cf 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1 TABLE 3

1. Owner: lilinois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Scheduled Visual Examinations / Functional Tests of Component Supports REFERENCE ITEM EXAM CODE CODE CODE RESULTS NUMBER IDENTIFICATION TYPE ITEM CATEGORY Ct. ASS 910465 1MS27010S VT3/FT F3 F-C 3

ACCEPTABLE 910575 1MS27014A VT3 F3 F-C 3

DEFERRED TO RF-6 910576 1MS27014A-WA VT3 D1.20 D-A 3

DEFERRED TO RF-6 910577 1MS27016X VT3 F3 F-C 3

DEFERRED TO RF-6 910580 1MS27017X VT3 F3 F-C 3

DEFERRED TO RF-6 910690 1MS28002X VT3 F3 F-C 3

ACCEPTABLE 910732 1MS28010S-WA VT3 D1.20 DA 3

ACCEPTABLE 910740 1MS28012C VT3 F3 F-C 3

ACCEPTABLE 910742 1MS28012C-WA VT3 D1.20 D-A 3

ACCEPTABLE 910945 1MS29010X VT3 F3 F-C 3

ACCEPTABLE 910980 1MS29015X VT3 F3 F-C 3

DEFERRED TO RF-6 910960 1MS29016A VT3 F3 F-C 3

ACCEPTABLE 910962 1MS29016A-WA VT3 D1.20 D-A 3

ACCEPTABLE 911115 1MS30015S VT3/FT F3 F-C 3

ACCEPTABLE 911117 1MS30015$-WA VT3 D1.20 D-A 3

ACCEPTABLE 911153 1MS30018X VT3 F3 F-C 3

DEFERRED TO RF-6 911155 1MS30019X VT3 F3 F-C 3

DEFERRED TO RF-6 l

l 911130 1MS30020A VT3 F3 F-C 3

ACCEPTABLE 911132 1MS30020A WA VT3 D1.20 D-A 3

ACCEPTABLE 911190 1MS31007S VT3/FT F3 F-C 3

ACCEPTABLE 911220 1MS31011X VT3 F3 F-C 3

DEFERRED TO RF 6 911210 1MS31013A VT3 F3 FC 3

ACCEPTABLE 911212 1MS31013A-WA VT3 D1.20 D-A 3

ACCEPTABLE 911228 1MS31014A VT3 F3 F-C 3

DEFERRED TO RF-6

!O 911 29

,MS31e,4A-WA VT3 D1.2e D-A 3

DE, ERRED Te R,-6

,-r,

,-,-----m.

mm -,, - - -. - -

1 PI9314 cf 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1 TABLE 3

. f]%

1. Owner: lilinois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Scheduled Visual Examinations / Functional Tests of Component Supports REFERENCE ITEM EXAM CODE CODE CODE RESULTS NUMBER IDENTIFICATION TYPE ITEM CATEGORY CLASS 910110 1MS32008S VT3/FT F3 FC 3

ACCEPTABLE 910637 1MS34008S-WA VT3 D1.20 D-A 3

ACCEPTABLE 910647 iMS34010S-WA VT3 D1.20 D-A 3

ACCEPTABLE 910810 1MS34013A VT3 73 FC 3

DEFERRED TO RF-6 910811 1MS34013A-WA VT3 D1.20 0-A 3

DEFERRED TO RF-6 910887 1MS35010S-WA VT3 D1.20 DA 3

ACCEPTABLE 911036 1MS360115 WA VT3 D1.20 D-A 3

ACCEPTABLE 911135 1MS36013A VT3 F3 F-C 3

DEFERRED TO RF-6 O

911136 1MS36013A-WA VT3 01.20 D-A 3

DEFERRED TO RF-6 V

912000 1RH01001C VT3 F3 F-C 1

ACCEPTABLE 917015 1RH02004V VT3 F3 F-C 2

ACCEPTABLE 917075 1RH02016R VT3 F3 F-C 2

ACCEPTABLE 913700 1RH02022A VT3 F3 FC 2

ACCEPTABLE r

I 912185 1RH06004X VT3 F3 F-C 1

ACCEPTABLE 912215 1RH06010C VT3 F3 F-C 1

ACCEPTABLE 912245 1RH06016R VT3 F3 F-C 1

ACCEPTABLE 913270 1RH07003S VT3/FT F3 F-C 2

ACCEPTABLE 913335 1RH07016R VT3 F3 F-C 2

ACCEPTABLE 914789 1RH07019X VT3 F3 F-C 2

ACCEPTABLE a

914845 1RH07031C VT3 F3 F-C 2

ACCEPTABLE 913460 1RH07061X VT3 F3 FC 2

ACCEPTABLE t

916740 1RH07075X VT3 F3 F-C 2

ACCEPTABLE 913495 1RH07079A VT3 F3 F-C 2

ACCEPTABLE 913530 1RH07086X VT3 F3 F-C 2

ACCEPTABLE

/~N 916420 1RH071195-E VT3/FT N/A N/A 2

ACCEPTABLE 5 I (./

r-

..,-..,,-,m.

Pa9e 15 of 27 FORM NIS-1 OWNER'S REPORT FOR INSEhVICE INSPECTION ATTACHMENT 1 TABLE 3 fh

(,/

1. Owner: tilinois Power Company, P. O. Box 678. Rt. 54E., Clinton, IL 61727 1

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727 j

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A i

S. Commercial Service Date: 4-24-87

6. National Be rd Number for Unit: N/A i

10. Abstract of Examinations: Listing of Scheduled Visual Examinations / Functional Tests of Component Supports REFERENCE ITEM EXAM CODEf CODE CODE RESULTS NUMBER IDENTIFICATION TYPE ITEM - CATEGORY CLASS 916430 1RH07119S-W VT3/FT N/A N/A 2

ACCEPTABLE i

913375 1RH08029S VT3/FT F3 F-C 2

ACCEPTABLE 913410 1kH08070s VT3/ft F3 F-C 2

ACCEPTABLE 913415 1RH08071S VT3/FT F3 T-C 2

ACCEPTABLE 913425 1RH08073S VT3/FT F3 F-C 2

ACCEPTABLE i

914970 1RH08102S VT3/FT F3 F-C 2

ACCEPTABLE 915550 1RH081035 VT3/FT

. F)

F-C 2

ACCEPTABLE 915700 1RH081055 VT3/FT N/A N/A 2

ACCEPTABLE A

f 913980 1RH09018V VT3 F3 F-C 2

ACCEPTABLE l

913110 1RH09023V VT3 F3 F-C 2

ACCEPTABLE 913200 1RH09032S VT3/FT F3 F-C 2

ACCEPTABLE 913210 1RH09034S VT3/FT F3 F-C 2

ACCEPTABLE t

914085 1RH09036S VT3/FT F3 F-C 2-ACCEPTABLE l

914010 1RH09064X VT3 F3 F-C 2

ACCEPTABLE l

914035 1RH09069s VT3/FT F3 F-C 2

ACCEPTABLE 3

914040 1RH09070s VT3/FT F3 F-C 2

ACCEPTABLE 1

914045 -

1RH09071S VT3/FT F3 F-C 2

ACCEPTABLE 913140 1RH09078X VT3 F3 FC 2

ACCEPTABLE i

914050' 1RH09087S VT3/FT F3 F-C 2

ACCEPTABLE 914180 1RH10003A-VT3 F3 F-C 2

ACCEPTABLE i

914185 1RH10011S VT3/FT F3 FC 2

SUBSTITUTED BY 1RH09088S l

913892 1RH11002X VT3 F3 FC 2

ACCEPTABLE

[

913902 1RH11009S VT3/FT F3 FC 2

ACCEPTABLE 913904 1RH11010R VT3 F3 F-C 2

ACCEPTABLE 913925 1RH12003x VT3 F3 F-C 2

ACCEPTABLE i

l 1

i

... ~

,I

PKgn 16 of 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1 TABLE 3

,_s

/

\\

C./

1. Owner: lilinois Power Company, P. O. Box 678 Rt. 54E., Clinton, IL 61727

1. Plant Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Scheduled Visual Examinations / Functional Tests of Component Supports RE E ITEM EXAM CODE CODE CODE RESULTS B

IDENTIFICATION 1YPE ITEM CATEGORY CLASS 919274 1RH23009X VT3 F3 FC 1

ACCEPTABLE 912310 1RH34008A VT3 F3 FC 1

ACCEPTABLE 919125 1R101006C VT3 F3 F-C 1

ACCEPTABLE 919160 1R101013W VT3/FT F3 F-C 1

ACCEPTABLE 920425 1RIO3002X VT3 F3 F-C 2

ACCEPTABLE 920455 1R103012X VT3 F3 F-C 2

ACCEPTABLE 920285 1R!08006X VT3 F3 F-C 2

ACCEPTABLE 920305 1R108010S VT3/FT F3 F-C 2

ACCEPTABLE

/D Q

920315 1R108012X VT3 F3 F-C 2

ACCEPTABLE 919262 1R108015X VT3 F3 F-C 1

ACCEPTABLE 919000 1RIO8031G VT3 F3 F-C 1

ACCEPTABLE 919095 1R110015G VT3 F3 F-C 1

ACCEPTABLE 920975 1R113004S VT3/FT N/A N/A 2

ACCEPTABLE 920480 1RI46002S VT3/FT N/A N/A 2

ACCEPTABLE 920485 1R146003S VT3/FT N/A N/A 2

ACCEPTABLE 923015 1RT01004C VT3 F3 F-C 1

ACCEPTABLE 923135 1RT01019R VT3 F3 F-C 1

ACCEPTABLE 923175 1RT01027R VI3 F3 F-C 1

ACCEPTABLE 924095 1RT070065-N VT3/FT N/A N/A 3

SUBSTITUTED BY 1RT06015S 924100 1RT070065-S VT3/FT N/A N/A 3

ACCEPTABLE 924120 1RT07032S VT3/FT N/A N/A 3

ACCEPTABLE 909265 15103D VT3/FT F3 FC 1

ACCEPTABLE 909080 151046 VT3/FT F3 FC 1

ACCEPTABLE 909025 15105A VT3/FT F3 FC 1

ACCEPTABLE

' /~%

(

)

909200 1S108C VT3/FT F3 F-C 1

ACCEPTABLE w/

q r

Paga 17 cf 27 i

t FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1 l

TABLE 3 t

h

1. Owner: tilinois Power Company, P. O. Box 678 Rt. 54E., Clinton, IL 61727 b

2. Plant Clinton Power Station, P. O. Box 678 Rt. 54E., Clinton, IL 61727

3. Plant Unit 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: twA

10. Abstract of Examinations: Listing of Scheduled Visual Examinations / Functional Tests of Component Supports l

REFERENCE ITEM EXAM CODE CODE CODE RESULTS l-NUMBER IDENTIFICATION TYPE ITEM CATEGORY CLASS L

921320 1so90-SP12 I

VT3 F3 F-C 2

ACCEPTABLE 921350 1sD90-SP4 VT3 F3 F-C 2

ACCEPTABLE 940895 1sK01012R VT3 F3 F-C 3

ACCEPTABLE 940955 1sX01015R VT3 F3 F-C 3

ACCEPTABLE l

940995 1sX01017R VT3 F3 F-C 3

ACCEPTABLE 941000 1sx01017R WA VT3 D2.20 D-B 3

ACCEPTABLE 941475 1sX01047A VT3 F3 FC 3

ACCEPTABLE h

941480 1sX01047A-WA VT3 D2.20 0-B 3

ACCEPTABLE 941040 1sX01052R VT3 F3 F-C 3

ACCEPTABLE 941730 1sx02004X VT3 F3 F-C 3

ACCEPTABLE 941790 1sX02007R VT3 F3 FC 3

ACCEPTABLE 941870 1sx02011X VT3 F3 F-C 3

ACCEPTABLE 941935 1sX02014R VT3 F3 FC 3

ACCEPTABLE 941995 1sX02017A VT3 F3 F-C 3

ACCEPTABLE 942000 1sX02017A-WA VT3 D2.20 D-B 3

ACCEPTABLE 946665 1sx11022X VT3 F3 FC 3

ACCEPTABLE 946670 1sX11022X-WA VT3 02.20 0B 3

ACCEPTABLE 942290 1sX14004R VT3 F3 FC 3

ACCEPTABLE 942430 1sX14011G VT3 F3 F-C 3

ACCEPTABLE 942575 1sX14018R VT3 F3 F-C 3

ACCEPTABLE 944560 1sX16003X VT3 -

F3 F-C 3

ACCEPTABLE 944700 1SX16010X VT3 F3 F-C 3

ACCEPTABLE 944950 1sx16022X VT3 F3 FC 3

ACCEPTABLE 947260 1sx19001s VT3/FT N/A N/A 3

ACCEPTABLE 947280 1sX19014s VT3/FT N/A N/A 3

ACCEPTABLE qD

Pzg318 cf 27

~

FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1

[

TABLE 3

1. Owner: tilinois Pcwer Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727 1

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Scheduled Visual Examinations / Functional Tests of Component Supports REFERENCE ITEM EXAM CODE CODE CODE RESULTS NUMBER IDENTIFICATION TYPE ITEM CATEGORY CLASS 942680 1sx20005R VT3 F3 F-C 3

ACCEPTABLE 942740 1sx2000BA VT3 F3 F-C 3

ACCEPTABLE 942745 1sx20008A-WA VT3 D2.20 D-B 3

ACCEPTABLE 945140 1sx22009A VT3 F3 F-C 3

ACCEPTABLE 945145 1sx22009A-WA VT3 D2.20 D-B 3

ACCEPTABLE 945185 1sx22011x VT3 F3 F-C 3

ACCEPTABLE 945245 1sx22014R VT3 F3 F-C 3

ACCEPTABLE 943395 1sx24008A WA VT3 D2.20 D-B 3

ACCEPTABLE 946770 1SX51005R VT3 F3 F-C 3

ACCEPTABLE 946920 1sx51011x VT3 F3 F-C 3

ACCEPTABLE 949300 1VG01021s VT3/FT N/A N/A O

ACCEPTABLE 949320 1VG01036s VT3/FT N/A N/A 0

ACCEPTABLE 949220 1VG02019s VT3/FT N/A N/A O

ACCEPTABLE 949240 ivG02020s VT3/FT N/A N/A O

ACCEPTABLE 949040 1VG03016s VT3/FT N/A N/A O

ACCEPTABLE 949400 1VG12005s VT3/FT N/A N/A O

ACCEPTABLE 949100 1VG13055s VT3/FT N/A N/A O

ACCEPTABLE

Page 19 cf 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION i

ATTACHMENT 1

(']

TABLE 4 I C/

1. Owner: tilinois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Substituted and Additional Functional Tests of Component Supports REFERENCE ITEM EXAM CODE CODE CODE RESULTS s

NUMBER IDENTIFICATION TYPE ITEM CATEGORY CLASS 913150 1RH09088S VT3/FT F3 F-C 2

ACCEPTABLE 924055 1RTD6015S VT3/FT N/A N/A 3

ACCEPTABLE i

l l

l I

1

Pcg3 20 cf 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1

[p TABLE 5

1. Owner Illinois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Scheduled Pressure Tests ITEM EXAM CODE CODE CODE RESULTS IDENTIFICATION TYPE ITEM CATEGORY CLASS ALL CLASS 1 COMPONENTS VT-2 B15.10 B-P 1

ACCEPTABLE, SEE NOTE 1

-(

t I

Pige 21 of 27 l

FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1

~

TABLE 5 NOTES i

'q

1. Owner: Illinois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Scheduled Pressure Tests a

4 NOTE 1: Pressure Tests Class 1 Components A system leakage test and VT-2 inspection of ASME Code Class 1 components was performed prior to plant startup.

Conditions Noted: Only minor leakage from valve packings and bolted flange connections was noted.

Corrective Measures: The leakage was either corrected during the performance of the test or the leakage was i

evaluated as acceptable by filinois Power.

t O.

(U l

l 1

l O

(\\_)

i

Pcg3 22 cf 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1 TABLE 6

1. Owner; lilinois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Scheduled Examinations for Erosion / Corrosion ITEM EXAM CODE RESULTS IDENTIFICATION TYPE CLASS CBELL2.1 UT D

DEFERRED TO RF6, SEE NOTE 5 CBELL9.1 UT D

DEFERRED TO RF6, SEE NOTE 5 CBSREL11.1 UT D

DEFERRED TO RF6, SEE NOTE 5 CBTEE9.3 UT D

DEFERRED TO RF6, SEE NOTE 5 ES11BA UT D

ACCEPTABLE 1

ES14BB UT D

ACCEPTABLE ES14BC UT D

ACCEPTABLE ES16AA UT D

ACCEPTABLE ES16BA UT D

ACCEPTABLE ES19AA UT D

ACCEPTABLE ES21AC UT D

ACCEPTABLE ES21AD UT D

ACCEPTABLE ES22AA UT D

ACCEPTABLE i

ES23AA UT D

ACCEPTABLE ES23AB UT D

ACCEPTABLE ES45EL2.1 UT D

ACCEPTABLE ESELL10.4 UT D

ACCEPTABLE ESELL2.2 UT D

ACCEPTABLE ESELL3.2 UT D

ACCEPTABLE ESELL4.5 UT D

ACCEPTABLE I

ESN0Z13.3 UT D

ACCEPTABLE I

ESN0Z2.1, UT D

ACCEPTABLE ESTEE5.3 UT D

ACCEPTABLE MFN0Z1.1 UT D

ACCEPTABLE 1

MFN0Z2.1 UT D

ACCEPTABLE t

--_....m-

....,-..w-

..y-.,

-,-(

e

Prg)23 cf 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION l

ATTACHMENT 1

(

TABLE 6

1. Owner: tilinois Power Company, P. O. Box 678 Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization. N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Scheduled Examinations for Erosion / Corrosion ITEM EXAM CODE RESULTS IDENTIFICATION TYPE CLASS MFN0Z3.1 UT D

ACCEPTABLE MFVLV1.1 UT D

ACCEPTABLE MFVLV2.1 UT D

ACCEPTABLE j

MFVLV3.1 UT D

ACCEPTABLE 1GSO42 UT D

ACCEPTABLE GS03A UT D

ACCEPTABLE GSO4A UT D

UNACCEPTABLE, SEE NOTE 1 GS12AA UT D

ACCEPTABLE

.s w/

GS13b3 UT D

ACCEPTABLE GSAS UT D

UNACCEPTABLE, SEE NOTE 2 CSA7 UT D

UNACCEPTABLE, SEE NOTE 2 1HD0638 UT D

ACCEPTABLE 1HD0728 UT D

ACCEPTABLE 1HD104B UT D

ACCEPTABLE HD41AB UT D

ACCEPTABLE HD43AB UT D

ACCEPTABLE HDELL31.10 UT D

ACCEPTABLE HDELL31.3 UT D

ACCEPTABLE HDELL52.12 UT D

ACCEPTABLE HDELL53.7 UT D

ACCEPTABLE HDLAT45.2 UT D

ACCEPTABLE HDNCZTO.2 UT D

ACCEPTABLE HDRED70.2 UT D

ACCEPTABLE HDTEE32.1 UT D

ACCEPTABLE O;ig 1821 SPDV4 UT D

ACCEPTABLE

PLga 24 cf 27 i

FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1 TABLE 6

['p N

1. Owner Illinois Power Company, P. O. Box 678. Rt. 54E., Clinton, IL 61727 i

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Scheduled Examinations for Erosion / Corrosion ITEM EXAM CODE RESULTS IDENTIFICATION TYPE CLASS 1821RSHLV2 UT D

ACCEPTABLE 1C85-F0013 UT D

ACCEPTABLE 1DG71A UT D

ACCEPTABLE 1TD14AC UT D

ACCEPTABLE 1TD14AD UT D

ACCEPTABLE 1TD14BA UT D

ACCEPTABLE 1T01488 UT D

ACCEPTABLE 1TD16BA UT D

ACCEPTABLE 1TD168B UT D

UNACCEPTABLE, SEE NOTE 3 1TD22A UT D

ACCEPTABLE 1TD23A UT D

ACCEPTABLE 1TD29BA UT D

ACCEPTABLE 1TD29BB UT D

ACCEPTABLE 1TD29C UT D

ACCEPTABLE 1TD39A UT D

SEE NOTE 4 1TD44A UT D

SEE NOTE 4 iTD51A UT D

ACCEPTABLE 1TD52A UT D

ACCEPTABLE 1TD53A UT D

ACCEPTABLE 1TD54AA UT D

ACCEPTABLE 1TD55AA UT D

ACCEPTABLE 1TD55AB UT D

ACCEPTABLE 1TD56A UT D

ACCEPTABLE

Pag 3 25 cf 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1

(-]

TABLE 6 NOTES

1. Owner: lilinois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Scheduled Examinations for Erosion / Corrosion Erosion / corrosion U.T. examinations were scheduled at 67 locations during RF-5. The systems in which -

examinations were performed include: Extraction Steam (ES), Feedwater (FW), Gland Steam (GS), Heater Drains (HD), Main Steam (MS), Off-Gas (OG), and Turbine Generator Miscellaneous Vents and Drains (TD).

Note 1:

Portions of piping were replaced with CrMo material via MWR D62127.

Note 2:

Sections of GSAS and GSA7 piping were replaced with carbon steel via MWR D62748.

Note 3:

A portion of this line was replaced with CrMo material via MWR D62747.

Note 4:

These condenser pipe stubs were noted to be leaking due to steam impingement prior to RF-5. These pipe stubs were replaced with stainless steel material via MWR's D50460 and D52178.

Note 5:

Each of these fittings have been inspected five previous outages. The inspection results show that wear is not a significant problem. These fittings were deferred to allow inspections of new locations in other systems.

P ga 26 cf 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1 1

TABLE 7 s

I i

1. Owner: lilinois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678 Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owne~ Certificate of Authorization: N/A r

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Substituted and AdditionalExaminations for Erosion / Corrosion ITEM EXAM CODE RESULTS IDENTIFICATION TYPE CLASS 1ES16AB UT D

SEE NOTES 1ES1BA UT D

ACCEPTABLE GSELL4.7 UT D

SEE NOTES GSTEE2.1 UT D

ACCEPTABLE GSTEE4.1 UT D

UNACCEPTABLE, SEE NOTES i

O d

i Paga 27 cf 27 FORM NIS-1 OWNER'S REPORT FOR INSERVICE INSPECTION ATTACHMENT 1

[

TABLE 7 NOTES

1. Owner; filinois Power Company, P. O. Box 678, Rt. 54E., Clinton, IL 61727

2. Plant: Clinton Power Station, P. O. Box 678, Rt. 54E., Clinton, IL 61727

3. Plant Unit: 1

4. Owner Certificate of Authorization: N/A

5. Commercial Service Date: 4-24-87

6. National Board Number for Unit: N/A

10. Abstract of Examinations: Listing of Substituted and Additional Examinations for Erosion / Corrosion A pinhole steam leak was noted at the toe of the weld at unreinforced tee connection GSTEE4.1 before RF-5, as documented by MWR DS9884 and NSED letters Y-104577 and Y-104584. During RF-5, UTinspections were performed on GSTEE4.1 and 4 other items (listed in Table 7) which represented 2 items of similar configuration and 2 items on the same line as GSTEE4.1.

GSTEE4.1 was found to be badly degraded and was replaced with a reinforced tee connection and straight pipe both made from stainless steel via MWR D59884. GSELL4.7 was noted to have some wear at the extrados and was replaced with stainless steel via MWR D59884 since this elbow is attached to the replacements for GSTEE4.7.

Similarly,1ES16AB was noted to have slight wear at its tee connection and was replaced with a reinforced tee made of stainless steel via MWR D59884.

(O 4

?

l i

a s

W 4

4 8.V p

,w' y

g-w y

pq r

-w

Pag)1 of 4 SECTION 3 (V(De LISTING OF EXAMINATION AND TESTING PROCEDURES This section provides a listing of all examination and testing procedures utilized during this inspection period. This listing includes only the procedures required for the testing, examination, and associated calibration of equipment. The contractor procedure records are available and are located in the Clinton Records Vault filed under record type 2E.220 for the RF-5 outage.

GENERAL ELECTRIC 4

Procedure Title Revision / Change Document 386HA480 Certification of Nondestructive Test Rev.11/ Addenda IPCPS-01, Rev. 0 Personnel Legend or Description of Groups GE-ADM-1001 Procedure for Performing Linearity Checks Version 0 on Ultrasonic Instruments

(

)

GE-ADM-1002 Procedure for Data Review and Analysis of Version 0 l

Recorded Ultrasonic indications I

I GE-ADM-1005 Procedure for Zero Reference and Data Version 0 i

Recording for Nondestructive i

Examinations GE-ADM-1006 Procedure for Compliance with USNRC Rev. 2 L

Regulatory Guide 1.150 i

l MT-CLN-100VO Procedure for Magnetic Particle Rev.0 Examination (Dry Particle, Color Contrast or Wet Particle, Fluorescent)

PT-CLN-100VO Procedure for Liquid Penetrant Rev.0 Examination (Visual Dye, Color Contrast or Fluorescent)

UT-CLN-102VO Procedure for Manual Ultrasonic Rev.0 Examination of Similar and Dissimilar Piping Welds UT-CLN-104VO Procedure for Manual Ultrasonic Planar Rev.O Flaw Sizing

3 P ga 2 cf 4 l

l SECTION 3 LISTING OF EXAMINATION AND TESTING PROCEDURES GENERAL ELECTRIC Procedure Title Revision / Change Document UT-CLN-106VO Procedure for Manual Ultrasonic Rev.0 Examination of Ferritic Piping Welds UT-CLN-300VO Procedure for Manual Ultrasonic Rev.0 Examination of Reactor Vessel Assembly Welds UT-CLN-301VO Procedure for Manual Ultrasonic Rev.0 Examination of Pressure Retaining Vessel Welds Less than 2"in Thickness UT-CLN-307VO Procedure for Ultrasonic Examination of Rev.O RPV Closure Studs UT-CLN-309VO Procedure for Manual Ultrasonic Rev.O I

Examination of Planar Flaw Sizing for Nozzle Inner Radius and Bore Regions UT-CLN-311VO Procedure for Manual Ultrasonic Rev.0 Examination of Nozzles Inner Radius and Bore UT-CLN-601VO Procedure for Ultrasonic Thickness Rev.O Measurements for Erosion / Corrosion VT-CLN-101VO Procedure for VT-1 Examination of Rev.O Pressure Retaining Bolting l'

P g) 3 cf 4 SECTION 3 LISTING OF EXAMINATION AND TESTING PROCEDURES ILLINOIS POWER Procedure Title Revision / Change Document 2800.03 Reactor Coolant System Leakage Test Rev.14 2800.05 Generic Pressure Testing of ASME Class Rev. 7 1,2, and 3 Systems 9843.02 O'perational Pressure Testing of Class 2 Rev. 32 and 3 Systems Appendix Vill Appendix Vill of the ISI Program Manual Rev.1 lilinois Power Company Nondestructive Examination Personnel Qualification and Certification Program

(

l.12 Liquid Penetrant Examination Rev.O l.14 Magnetic Particle Examination Rev.O l.18 VT-1 Visual Examination Rev.1 1.19 VT-3 Visual Examination of Component Rev.1 Supports 1.20 VT-3 Visual Examination of Pump and Rev.1 Valve Internals l

1.21 VT-2 Visual Examination Rev.1

P:g3 4 cf 4 SECTION 3 LISTING OF EXAMINATION AND TESTING PROCEDURES SIEMENS POWER CORPORATION Procedure Title Revision / Change Document

(

SPC-ND-JPB-001 Ultrasonic inspection of Jet Pump Hold Rev. 4 Down Beams WESTINGHOUSE l

Procedure Title Revision / Change Document BWRP-2.1 Reactor Pressure Vessel Intemals Visual Rev.O Inspection for Clinton Power Station QAP-2.1 Qualification and Certification of Rev. O, Supp. 2/ Addenda 1 Nondestructive Examination Personnel WOLF CREEK NUCLEAR OPERATING CORPORATION

-i Procedure Title Revision / Change Document QP 14.2 Qualification and Certification of Inspection Rev. 9/ OTSC 94-0445,95-0012 Personnel QP 14.3 Qualification and Certification of Rev. 7/ OTSC 94-0074,95-0013 Examination Personnel WYLE LABORATORIES Procedure Title Revision / Change Document MSS-002 Procedure for Functional Testing of Rev.D Hydraulic Snubbers MSS-004 Procedure for Functional Testing of Pacific Rev. F Scientific Mechanical Snubbers

P:g31 of 3 SECTION 4

/

U]A LISTING OF EXAMINATION AND TESTING PERSONNEL This section identifies the contracted examination and testing personnel used to perform the inspections and tests during this period. These personnel have been qualified and certified in accordance with the lilinois Power Company's ISI Program Manual and their employer's procedures and written practices.

Records of personnel qualification and certification are available and are located in the Clinton Records f

Vault. Wyle Laboratories and General Electric Co. records are stored in file 2E.200.

GENERAL ELECTRIC Name Discipline - Level E. Phil Bailey UT-lil, MT-Ill, PT-Ill, VT-1-Ill Calvin D. Carlson UT-lT, MT-lT, PT-iT James D. Cooper UT-lT, MT-lT, PT-lT R. Scott Heiser UT-1T, MT-IT, PT-IT William J. Helman UT-II, MT-l, PT-l i

Alan J. Kelly UT-1 Dawn Renee Koenig UT-IT Russell J. LaFleur UT-il, MT-II, PT-ll

p Wesley C. Money UT-ill, MT-Ill, PT-lil V

James Alan O'Neill UT-il, MT-II, PT-II, VT-1-Il Thomas Paul Rohlfing UT-1T PaulValden UT-II, MT ll, PT II, VT-1-il Martin B. Voss -

UT-il, MT-1, PT-1 i

lLLINOIS POWER i

Name Discipline - Level Carl E. Anderson MT-il, PT-il, VT-1,2,3-Il David L. Anthony MT-Ill, PT-Ill, VT-1,2,3-il i

Mirza M. Baig PT-ll, VT-1,2,3-il l

Laura E. Brown VT-2,3-Il Jim J. Carter VT-2-Il Charles W. Clark VT-1,2,3-Ill Richard L. Cole VT-2-Il Larry K. Combs PT-Il Craig R. Culp VT-2-Il j

Mohan M. Desal MT-!!, PT-II, VT-1,2,3-Il I

7,,)

(

Mike Gibson VT-2-Il

-i Kenneth W. Hetzel VT-2-Il

P g3 2 of 3 I

I SECTION 4 l

l 4

l LISTING OF EXAMINATION AND TESTING PERSONNEL l

l lLLINOIS POWER Name Discipline - Level MichaelW. Hintz MT-II, PT-il, VT-2,3-Il Max J. Hollinden VT-2-Il Tony D. Jennings VT-2-Il Randall D. Klinzing VT-2,3-Il Steven J. Kowalski VT-2-Il Gary L. Krampholz VT-2-Il Jeff J. Naden VT-2-Il Bryan J. Puckett VT-2-Il Edward D. Rau VT-2-Il Randall G. Rohrscheib VT-1,2,3-Il Tim B. Satterlee VT-2-Il Stephen M. Scott VT-2-Il Dave C. Siebert VT-2-Il Tim D. Tidwell VT-2-Il l

(

Ed E. Tiedemann VT-2-Il Keith D. Volker VT-2-Il Todd R. Wilmoth VT-1,2,3-Il Brian L. Zimmerman VT-2-Il i

WESTINGHOUSE Name Discipline - Level Roderick M. Brown VT-1,3-il Lori L. Clawson VT-1,3-il Danny R. Grainger VT-1,3-ll Ray N. Lough VT-1,3-Ill Larry C. Reaves VT-1,3-Ill Denzil R. Rowland VT-1,3-il Jeny E. Story VT-1,3-Ill WOLF CREEK Name Discipline - Level Sammy G. Calvert MT-il, PT-il, VT-3-il

Pigs 3 cf 3 SECTION 4 LISTING OF EXAMINATION AND TESTING PERSONNEL WOLF CREEK Name Discipline - Level Dwight Christiansen VT-3-Il Guenter H. Grell MT-il, PT-il, VT-2,3-ll Ronnie R. Maestas MT-il, PT-ll WYLE Name Discipline - Level Steven R. Rooks VT-4-ll (O(>

'\\V

Pag)1 of 3 SECTION 5 LISTING OF EQUIPMENT AND MATERIALS This section provides a listing of all materials and equipment used to perform the examinations and inspections during this period. The materials and equipment records are available and are located in the Clinton Records Vault filed under record type 2E.180 for the RF-5 outage.

I GENERAL ELECTRIC EQUIPMENT Description Manufacturer Model/ Type Serial No.

BLACKLIGHT SPECTROLINE SB-100 N/A BLOWER MX-INDUSTRIAL N/A N/A CALIBRATION BLOCK ROMPAS CAL-RHOM403 CALIBRATION BLOCK ROMPAS 91 4 009 CALIBRATION BLOCK ROMPAS A09276 CALIBRATION BLOCK ROMPAS A09277 CALIBRATION BLOCK STEP WEDGE 92-7927 CALIBRATION DLOCK STEP WEDGE A07819 CAllBRATION BLOCK STEP WEDGE A07817 CALIBRATION BLOCK STEP WEDGE A07667 i

CAllBRATION BLOCK STEP WEDGE 934995 CALIBRATION BLOCK llW2 CAL-ilW2-009 CALIBRATION BLOCK llW1 799947 CALIBRATION BLOCK WILLY CAL-WLLY-005 CAllBRATION BLOCK DEPTH CAL-DPTH-029 DISPENSER MX-INDUSTRIAL N/A N/A E/C DATA LOGGERS PANAMETRICS 26 DL+

93128006 E/C DATA LOGGERS PANAMETRICS 26 DL+

93127806 LIFT BLOCK PARKER 10 LB.

002 LIFT BLOCK PARKER 10 LB.

008 PIE GAUGE MX-INDUSTRIAL N/A 011 RADIOMETER SPECTRONICS DSE100 412304 SENSOR SPECTRONICS DIX 365 412264

P:g)2 of 3 SECTION 5 LISTING OF EQUIPMENT AND MATERIALS j

h

\\

' GENERAL ELECTRIC EQUIPMENT Description Manufacturer Model/ Type Serial No.

TEMPERATURE GAUGE PTC 127347 TEMPERATURE GAUGE PTC 128090 TEMPERATURE GAUGE PTC 133837 TEMPERATURE GAUGE PTC 133886 TEMPERATURE GAUGE PTC 133915 TEMPERATURE GAUGE PTC 134179 TEMPERATURE GAUGE FTC 134202 TEMPERATURE GAUGE PTC 134242 TEMPERATURE GAUGE PTC 134949 TEMPERATURE GAUGE PTC 134951 TRANSDUCER WEDGES VARIOUS N/A N/A TRANSDUCERS / CABLES VARIOUS VARIOUS VARIOUS l

UT SCOPE STAVELEY SONIC-136 786J UT SCOPE STAVELEY SONIC-136 781J UT SCOPE STAVELEY SONIC-136 709H YOKE PARKER B300 4822 l

YOKE PARKER B300 4849 GENERAL ELECTRIC MATERIAL Description Manufacturer Model/ Type Serial No.

HUMEX UT COUPLANT 94165 l

POWDER MAGNAFLUX 8A-RED 93A045 l

POWDER MAGNAFLUX 1-CRAY 92LO34

(/-

PREPARED BATH MAGNAFLUX 14AM 92002K PREPARED BATH MAGNAFLUX 14AM 92LO6K

(

l SECTION 5 LISTING OF EQUIPMENT AND MATERIALS

(\\7"'

GENERAL ELECTRIC MATERIAL Description Manufacturer Model/ Type Serial No.

PT MATERIAL MAGNAFLUX PENETRANT (SKL-SP) 93A02K PT MATERIAL MAGNAFLUX CLEANER (SKC-S) 93A05K PT MATERIAL MAGNAFLUX DEVELOPER (SKD-S2) 93A03P j

WYLE LABS EQUIPMENT l

- Description Manufacturer Model/ Type Serial No.

SNUBBER TEST MACHINE WYLE TABS 100 111 i

'O 1

k i

i J

J l

T f

O f

l P g31 of 4 l-1 SECTION 6 i

1(]m REPAIR AND REPLACEMENT

SUMMARY

NIS-2 OWNER'S DATA REPORTS l

This section provides a listing of the 57 ASME Section XI repairs or replacements performed between December 10,1993 and April 29,1995.

I All repairs and replacements are considered to be of a routine nature. There were no flaws identified during

_ performance of any ISI examinal'on that required a repair or replacement to be performed.

Code Case N-416-1 was utilized during the replacement of valve 1SX173A. This Code Case allowed the elimination of the hydrostatic testing requirement following welded replacement provided a surface examination is performed on the root pass of the pressure retaining welds.

Several modifications were completed during this period, including the following:

Modifications RT-031, M-064, M-082, and FW-035 consisted of various valve internal component changes.

ECNs 28818,28821,28822,28826, and 28828 allowed the installation of leak rate testing taps on relief valve flanges.

Snubber reduction was performed in accordance with M-071 and M-073.

Work was completed on RT-030, which involved piping changes.

Following the listing of repairs and replacements are copies of NIS-2 Owner's Data Reports for all of the Class 1 and 2 repairs and replacements performed during this reporting period. Data reports for any components or parts used in support of the NIS-2's have not been included with the NIS-2 copies but are filed with Section XI repair and replacement records.

The records for all Section XI repairs and replacements are available and located in the Clinton Records Vault filed in the respective N-5 system under record type 4E.230 entitled "N-5 Data Report Package Supplements".

O(V

P g3 2 cf 4 SECTION 6 l

REPAIR AND REPLACEMENT

SUMMARY

NIS-2 Number Class Description RF-5-01 3

INSTALL PLANT MODIFICATION RT-F031 on valve 1G36-F003A RF-5-02 2

REPLACE VALVE 1VR001A RF-5-03 '

1 REPLACE DISC ON VALVE 1E51-F072 RF 5-04 3

REPLACE FLANGE BOLTING ON LINE 1RT01DA3 i

RF-5-05 2

REPLACE FLANGE BOLTING ON PENET. MD-100 & BLIND FLANGE OF PENET, MC-67 RF-5-06 3

REPLACE LOAD PIN ON SUPPORT 1RT06042X RF-5-07 2

PERFORM WELD BUILD-UP OF HINGE PIN COVER SEATING SURFACE ON VLV 1G33F052B i

RF-5-08 3

PERFORM WELD BUILD-UP OF GASKET SEATING SURFACE ON VALVE 1G33F031 RF-5-09 3

REPLACE PLUG OF VALVE 1G36F004A RF-5-10 3

REPLACE LOWER BONNET BOLTING PER MOD. M464 ON VALVES iSX008B AND 1SX014B i

(

RF-5-11 3

REBUILT VALVE FOR RETURN TO STORES RF-5-12 3

REBUILT VALVE FOR RETURN TO STORES RF-5-13 1

REPLACE SEAL ON PUMP 1833C001A RF-5-14 2

REPLACE STEM AND DISC ON VALVE 1E12F085B, REPLACE DISC ON VALVE 1E12F084B 1

1 RF-5-15 3

REPLACE LOWER BONNET BOLTING PER MOD. M-064 ON VALVES 1SX003C AND 1SX004C RF-5-16 1

REPLACE SEAL ON PUMP 1833C001B RF-5-17 2

REPLACE FLANGE BOLTING ON LINE 1Rl06A RF-5-18 1

REPLACE DISC ON VALVE 1821-F019 RF-5-19 1,2 FABRICATE EXTENSION PIECES IN SUPPORT OF MODIFICATION M-071 RF-5-20 3

DELETE SNUBBERS PER MODIFICATION M-073 AND ECN 9629 I

RF-5-21 3

DELETE SNUBBERS PER MODIFICATION M473 AND ECN 9580 i

i RF-5-22 2

DELETE SNUBBERS PER MODIFICATION M-071 AND ECN 9548 RF-5-23 3

DELETE SNUBBERS PER MODIFICATION M473 AND ECN 9581

(

RF-5-24 1

DELETE SNUBBERS PER MODIFICATION M-071 AND ECN 9625

l P!ge 3 cf 4 t

SECTION 6 REPAIR AND REPLACEMENT

SUMMARY

NIS 2 Number Class Description RF-5-25 2

CORRFCT DATA REPORTS FOR VALVES 1E51-F011 AND 1E51-F030 I

RF-5-26 2

MODIFIED VALVE 1E12F017B FLANGE FOR TEST CONNECTION PER ECN 28826 RF-5-27 2

DELETE SNUBBERS PER MODIFICATION M-071 AND ECN 9626 l

l RF-5-28 3

DELETE SNUBBERS PER MODIFICATION M-073 AND ECN 9630 l

l l

RF-5-29 2

DELETE SNUBBERS PER MODIFICATION M-071 AND ECN 9577 I

RF-5-30 2

REPLACED DISC ON VALVE 1E12-F0318 RF-5-31 1

DELETE SNUBBERS PER MODIFICATION M-071 AND ECN 9571 RF-5-32 2

DELETE SNUBBERS PER MODIFICATION M-071 AND ECN 9544 RF-5-33 1

REMOVED CLAMPS FROM LINE 1RH09A18 PER ECN 29105 RF-5-34 2

MODIFY VALVE 1E12-F005 FLANGE FOR TEST CONNECTION PER ECN 28828 i

RF-5-35 2

MODIFY VALVE 1E21-F018 FLANGE FOR TEST CONNECTION PER ECN 28818 RF-5-36 3

REPLACED VALVE 1SX173A RF-5-37 2

REPLACED BLIND FLANGES ON PENETRATION 1MC074 RF-5-38 1

INSTALL MODIFICATION ON VALVE 1821F032B PER ECN 28576 RF-5-39 2

MODIFY VALVE 1E12F055A FLANGE PER ECN 28821, REPLACE FLANGE STUDS RF-5-40 1

REPLACED COVER NUTS ON VALVE 1821F010A RF-5-41 3

REPLACE VALVE 1833F076B DISC AND BACKSEAT BUSHING RF-5-42 1

REPLACE PUMP 1B33C001B SEAL i

RF-5-43 3

INSTALL MODIFICATION RT-030 AND ECN'S 27562 AND 28235 RF-5-44 1

MODIFY VALVE 1E21-F005 DISC PER MODIFICATION M-082 RF-5-45 3

REPLACE VALVE 1G33-F033 PLUG AND STEM RF-5-46

.1 REPLACE VALVE 1B21.-F010B HINGE PIN COVER STUDS AND NUTS RF-5-47 1,3 REPLACE SAFETY RELIEF VALVE 1821-F0518 AND VALVE BOLTING ii RF-5-48 1,3 REPLACE SAFETY RELIEF VALVE 1821-F047B AND VALVE BOLTING

.. ~

P ga4cf 4 SECTION 6 REPAIR AND REPLACEMENT

SUMMARY

NIS-2 Number Class Description RF-5-49 1,3 REPLACE SAFETY RELIEF VALVE 1821-F041D AND VALVE BOLTING RF-5-50 1,3 REPLACE SAFETY RELIEF VALVE 1821-F041C AND VALVE BOLTING RF-5-51 1

REPLACE PRIMER ASSEMBLY OF SOUlB VALVE 1C41-F004A RF-5-52 1

REPLACE VALVE 1E12-F042C DISC AND INSTALL MODIFICATION M-082 RF-5-53 1

REPLACE VALVE 1E51F063 DISC RF-5-54 2

INSTALL MODIFICATION RT-034 RF-5-55 2

MODIFY VALVE 1E12-F036 FLANGE FOR TEST CONNECTION PER ECN 28822 i

RF-5-56 2

WELD BUILD-UP OF GASKET SEATING SURFACE ON VALVE 1821-F0658 RF-5-57 3

REPLACE VALVE 1SX025A BALL T

[

i V l

1 i

.-...... m.

,._,..._._.-._,.-c r.

m,.

l i

l l

l ILLINOIS POWER COMPANY FORM NIS 2 OWNER 8S REPORT FOR REPAIRS OR REPLACEMENTS C,%.

As Required by the Provisions of the ASME Code Section XI M05 1111-1 j

'f i

i Q-1.

Owner itLinois Power Company Data Report No. RF-5-02 Name Box 678, Clinton, IL 61727 Date Decenber 16, 1993 Address Sheet i~ of 1 2.

Plant Clinton Power Station Unit 1

l Name j

Box 678, Clinton, IL 61727 MWR- 033372 Address Repair Organization P.O. No, Job No.

3.

Work Performed by lltinois Power Co.

Type Code Synbot Stamp N/A Box 678, Clinton, Ittinois 61727 Authorization No.

N/A l

Address Expiration Date N/A 4.

Identification of System Containment stdg. HVAC (NVR01)

Code Class 2 5.

(a) 1) Applicable Construction Code ( Piping

)

Section Ill 19 74 Edition, $74 Addenda, code Cases NA

2) Applicable Construction Code ( Valve

)

Section til 19 74 Edition, W76 Addenda, Code Cases WA (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81

Addenda, Code Cases N308 6.

Identification of Co g onents Repaired or Replaced and Replacement Components ASME Code National Repaired Stamped

\\

\\

Name,of, Name of Manufacturer Board

. other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identification Built or Replacement No)

Valve Post Seal 16204-308 NA 1VfdO1A 1981 Replaced Yes N

N N

N in.-

FM m

N N

A 7.

Description of Work Replaced valve to assure successful completion of LLRT test. After installation, the LLRT was successfutty completed but the valve did not operate correctly. The valve was declared inoperable and will be reworked in RF 5 on MWR 056901. The Code replacement performed on this NWR is considered satisfactory.

8.

Tests Conducted:

Hydrostatic [ ]

Pnetmatic ( )

Pressure psi Test Temp.

'F hominal Operating Pressure [ ]

Exenpt [ ] Other [X] LLRT 9.

Remarks The valve was accepted on 091 2248.

The data report for the replacement valve is not attached because the valve was previously installed (A

in the Vo system and the NV-1 Data Report for the replacement valve is located in N-5 Data Report Supplement Package NVQ01. Supplement O.

w-or y-rr r

tg r-P

-m

-p-M-r y

+---&

"-y-N+

y fye'-

T'e*"dr

-W'

l CERTIFICATE OF COMPLIANCE

,g l

We certify that the statements made in this report are correct and this replacement confo ms to the rules of the ASME Code, Sectior XI.

(repair or replacement)

[7

,19 b Sig

/

m Supervisor-ISI Date o

Owneror$wnchsDesigneeMTitle CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid conrnission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Ittinois and employed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the conponents described in this Owner's Report during the period 06/01/93 to 12/16/93, and state that to the best of 'my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the inspector nor his employer makes any warranty, expressed or inplied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

Commissions 8 8 [ A / J // [MM[

En Ins [dr'ssignature National Board, State, Province Date M M19

k a

ILLINOIS POWER COMPANY FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS f

As Required by the Provisions of the ASME Code Section XI M05-1079-2 1.

Owner It tinois Power Conpany Data Report No. RF-5-3 l

Name I

Box 678, tilnton, IL 61727 Date December 27, 1993 Address Sheet 1 of 1'

2.

Plant Clinton Power Station Unit 1

l Name a

Box 678, Clinton, IL 61727 MWR-D33101 Address Repair Organization P.O. No, Job No.

(

3.

Work Performed by Ittinois Power Co.

Type Code Symbol Stamp N/A Box 678, Clinton, itLinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Reactor Core Isolation Cooling (NR101)

Code Class 1 5.

(a) 1) Applicable construction Code ( valve

)

Section III 19 74 Edition, S75 Addenda, Code Cases 1516.1, 1567. 1622, 1635.1, 1677 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980

_V31

Addenda, Code Cases N308 6.

Identification of Components Repaired or Replaced and Replacement Components ASME Code i

National Repaired Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or component Manufacturer Serial No.

No.

Identification Built or Replacement No) valve Anchor / Darling E 6214 87-1 NA 1E51-F072 1978 Replacement Yes N

w

\\

w a

i.

s

'7%

N N

N A

7 Description of Work Disassembled valve to inspect for excess wati thinning per NRC Information Notice 89-01, Valve wall was inspected and was evaluated by NCED as acceptable. The disc was evaluated and determined to reautre replacement. Welded the dise nut to the new disc and reassembled the valve. The valve was retested satisfactory.

8.

Tests conducted:

Hydrostatic [ ]

Pneumatic ! )

Pressure psi fest Temp.

'F Nominal Operating Pressure IX)

Exempt [ ] Other [ }

9.

Remarks The new disc (Seriet No. 7) was accepted on 01573 of P.O. X16856.

e a'

i i

CERTiflCATE OF COMPLIANCE S

We certify that the statements made in this report are correct and this replacement confo. to the s of the ASME Code,Section XI.

(repair or replacement)

,3

, 19 7 Sig Supervisor.lSI Date DesigneefTitle 8

Owner or Owne CERilf!CATE Of INSERVICE INSPECTION I, the undersigned, holding a valid comission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Ittinois and employed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the components described in this Owner's Report during the period 11/04/93 to 12/27/93 and state that to the bes't of n1y knowledge and belief, the Owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or inplied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the inspector nor his employer shall be liable in any manner for any personal injury or property damage or a auss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

Ak h Comissions $SQl$ff Ell N $

[ Signature National Board, State, Province Ins

(.19 Date O

yn ILLINOIS POWER COMPANY

[

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS l

As Required by the Provisions of the ASME Code Section XI M05-1048-6,9 1.

Owner It tinois Power Cons)any Data Report No. RF-5-5 Name Box 678, Clinton, IL 61727 Date January 13, 1994

[

Address Sheet i of 1

q 2.

Plant Clinton Power Station Unit i

Name Box 678, Clinton, IL 61727 MWR-D26403 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Illinois Power Co.

Type Code Symbol Stamp N/A Box 678, Clinton, Illinois 61727 Authorization No.

N/A Address Expiration Date N/A I

4.

Identification of System Service Air (NSA01)

Code Class 2 S.

(a) 1) Applicable Construction Code ( Piping

)

Section 111 19 74 Edition, S74 Addenda, code cases None (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81

Addenda, Code Cases N308 6.

Identification of Components Repaired or Replaced and Replacement Conponents r

ASME Code National Repaired Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or Conponent Manufacturer Serial No.

No.

Identification Built or Replacement No)

]

Penetration Illinois Power NSA01 NA 1SAB186 1986' Replacement Yes Penetration Illinois Power NSA01 NA 1SA103A6 1986 Replacement Yes N

N w

a

' &:tJ2/

x 7.

Description of Work in support of the drywelt bypass leak rate test, instatted new botting on the inboard and outboard flange of drywelI penetration MD 100. Installed new botting and a new btind flange on the inboard side of penetration MC-67.

8.

Tests Conducted:

Hydrostatic ! )

Pneumatic ! )

Pressure psi Test Terrp.

• F Nominal Operating Pressure [ ]

Exempt [ ] Other (X) LLRT f

9.

Remarks The materiet used was accepted as foitows:

Twenty-four (24) studs (Ht. Cd. CD) accepted on C12504 of P.O. 511167.

Forty-eight (48) nuts (Ht. Cd. A8) accepted on 07666 of P. O. X34847.

One (1) btind fIange accepted on R933200025.

'O 1

t

,..,.~n--,~-n,

-,.-,,,-,,-.---------.,.n

n_.

~

CERTIFICATE OF COMPLIANCE 1

We certify that the statements made in this report are correct and this replacement confer s to the of the ASME Code,Section XI.

(repair or replacement)

Signe

/As.

b Supervisor-ISI Date W /3

, 19 dwnerorOwne DesignefTitle h

/'

CERtlFICATE OF INSERVICE INSPECTION 4

I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Illinois and employed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the components. described in this Owner's Report during the period 11/26/93 to 01/13/94, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

~

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising f rom or connected with this inspection. * (Factory Mutual Engineering Association)

ComissionM

/8 M//M Inspe((sSignature National koaid) da'te, Province Date

1. A,

/[ 19[

/

f l

h' l

i

i ILLINOIS POWER COMPANY i

FORM N!S-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI M05 1076-4 1.

Owner Illinois Power Comany Data Report No. RF 5-7 Name i

Box 678. Clinton, IL 61727 Date January 17, 1994 Address Sheet 1

of 1 2.

Plant Clinton Power Station Unit 1

(

Name Box 678 Clinton, IL 61727 MWR- 053800 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Illinois Power Co.

Type Code Syubol Stamp N/A Box 678, Clinton, Ittinois 61727 Authorization No.

N/A i

Address Expiration Date N/A

{

4.

Identification o.f System Reactor Water Cleanup (NRT01)

Code Class 2 3

5.

(a) 1) Applicable Construction Code ( _ valve

)

Section III 19 74 Edition, S75 Addenda, Code Cases 1516.1. 1567, 1622, 1635.1, 1677 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81

Addenda, Code Cases N308 6.

Identification of Components Repaired or Replaced and Replacement Components ASME l

Code National Repaired Stamped I.

Name of g

,Name of Manufacturer Board Other Year Replaced (Yes or Sef al No.

No.

Identification Built or Replacement No) i s

Component t

% factprerr.

g Valve

' Anchor Darling E6214-22 3 NA 1G33F052B 1979 Repaired Yes N

N' N

n, -..,

v< r N

N N

N 7.

Description of Work Repaired smalt areas of pittino on casket seatina surface of both hinne pin covers. Prepared cover weld areas, performed welded repair, remachined casket area and performed a MT of final surfaces.

8.

Tests conoucted:

Hydrostatic [ ] Pneumatic [ ]

Pressure psi Test Temp.

'F Norninal Operating Pressure [ ]

Exenpt I 1 Other [X) Exemt per IWA 4400 9.

Remarks None N

0

\\

1 CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this repair conf to the ru of the ASME Code,Section XI.

(repair or replacement)

Sig h

a $upervisor-ISI Date

/7

, 19 3 Owner or owner esignee,httle h

8 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Ittinois and employed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the components described in this Owner 8s Report during the period 11/25/93 to 01/17/94 and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the exam'inations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

Comissions 88 [8/8 M//[f Ins ((sSignature NationalBoard,Sta[e, Province Date M/ _19 f

ILLINOIS POWER COMPANY FORM NIS-2 OWNER'S REPORf FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI M05-1072 1 U

1.

Owner Illinois Power Company Data Report No. RF-5-13 Name Box 678, Clinton, IL 61727 Date May 17,1994 Address Sheet 1 of 1 2.

Plant Clinton Power Station Unit 1

Name Box 678, Clinton, IL 61727 MWR- 057897 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Ittinois Power Co.

Type Code Synbol Stanp N/A Box 678, Clinton, Illinois 61727 Authorization No.

N/A Address Expiration Date N/A 4

Identification of System Reactor Recirculation (NGE01)

Code Class 1 5.

(a) 1) Applicable Construction Code ( Pure

)

Section 111.19 71

Edition, W73 Addenda, Code Cases None (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81

Addenda, Code Cases N308 6.

Identification of Conponents Repaired or Replaced and Replacement Conponents ASME Code National Repaired Stamped Name of hame of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identification Built or Replacement No)

B,ingham-Wul,akt e 14217101 NS-394 1833C001A,

1977

• ] Replacement Yes Puip s.

s

~

N N

N

. x.

A,.u

' TR'N N

N 7.

Description of Work Replaced puso seat assenbty due to pressured integrity degradation of the inner seat assen6ty.

8.

Tests Conducted:

Hydrostatic [ ]

Pneumatic [ ]

Pressure osi Test Tenp.

'F Nominal Operating Pressure [X)

Exempt [ ] Other [ ]

9.

Remarks The replacemetts were accepted as follows:

Seat holder (1436139-1) was accepted on 016910 of P.O. 518668.

Upper seat gland (1126342-1) was accepted on 0168?4 of P.O. 521287.

, +, - -..

• -,w im

, c wr-r e v

---

,-u.

-u,,

w

,,,.----=e-e.,.w,---...,m, e----

--,-e

-v,~

r-

n CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this replacement confo o th les of the ASME Code,Section XI.

(repair or replacemen )

Sig M1 A Supervisor-ISI dwneror sDesigned, Title

'1

[

~3 19 Date A

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Illinois and employed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the components described in this owner's Report during the period 03/03/94 to 05/17/94, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or inplied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

/A Comissions /V8 $l$

Tll//ff Inspe(( Signature NationalYoaid[ State, Province Yddl $

19 Date i

O

l e

ILLINOIS POWER COMPANY FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI M05-1075 2 g

.}r (V

1.

Owner Ittinois Power Company Data Report No. RF-5-14 Name Box 678, Clinton, IL 61727 Date July 14, 1994 Address Sheet 1 of 1 2.

Plant Clinton Power Station Unit i

Name Box 678. Clinton, IL 61727 MWR- 056343, 057111 Address Repair Organization P.O. No, Job No.

3.

Work Perforced by Illinois Power Co.

Type Code Synbol Stanp N/A Box 678, Clinton, Ittinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Residual Heat Removat (NRH01)

Code Class 2 5.

(a) 1) Applicable Construction code (Yarwav-Valve

)

Section III 19 74 Edition, W75 Addenda,

' Code Cases 1516-2

2) Applicable Construction Code (Anchor-Valve

)

Section III 19 74 Edition, 575 Addenda, Code Cases 1516.1, 1567, 1622, 1635.1, 1677 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81

Addenda, Code Cases N308 6.

Identification of Components Repaired or Replaced and Replacement Components ASME i

Code National Repaired Stamped

)

Name of, Name of Manufacturer Board Other Year Replaced (Yes or coroponent'.

Manufdgurer ( ;se(lalNo.

No.

Identification -

Built.lorLReptocement No) d Valve Yarway A5188 NA 1E12F0850 1978 Reptocement Yes Valve Anchor / Darling E6214-234-2 NA 1E12F0848

- 1980

, Replacement Yes

)

w 1

Mat #

x N

w w

7.

Description of Work During surveillance testing, the valves were found to be leaking past their seats. Valve 1E12F0858 was disassembled, cleaned, and inspected. A new stem and disc were replaced. Check valve 1E12F0848 was disassenbled, cleaned and the dice replaced. The vatves were reassembled and tested satisfactory.

8.

Tests Conducted:

Hydrostatic ! 3 Pneunatic ! 3 Pressure psi Test Tenp.

• F Nominal Operating Pressure [X1 Exempt [ ] Other [ ]

9.

Remarks For 1E12F085B, the replacement valve dise was accepted on 0913335 of P.O. 522543.

For 1E1?F0848, the replacement valve dise (SN-10) was accepted on 02557 of P.O. C16533.

k

()

e CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this replacement confo to the rules of the ASME Code,Section XI.

(repair or replacement) at. Supervisor-ISI Date

"/I ~

,19 ff Sig hb bwneror'd

's Desig

, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Illinois and employed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the components described in this owner's Report during the period 04/19/94 to 07/14/94, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising f rom or connected with this inspection. * (Factory Mu wal Engineering Association)

Commissions [ [ N / 3 !I I.I M

1. l.e Inchr's5fgnature National boa d) date, Province Date

. M 19 f

i l

i

ILLINOIS POWER COMPANY FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI b

1.

Owner !!!inois Power Company Data Report No. RF-5-16 Name Box 678, Clinton. IL 61727 Date September 9, 1994 Address Sheet 1 of 1 2.

Plant Clinton Power Station Unit 1

Name Box 678. Clinton, IL 61727 MWR-D52241 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Illinois Power Co.

Type Code Symbol Stanp N/A Box 678, Clinton, Ittinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Reactor Recirculation (NGE01)

Code Class 1 5.

(a) 1) Applicable Construction Code ( Pump

)

Section III 19 71 Edition, W73 Adderda, l

Code Cases None (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81

Addenda, Code Cases N308 6.

Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identification Built or Replacement No)

Ptsrp Bingham-Willametue14217102 NB-394 1B33-C001B 1977 Replacement Yes x

- 1 t\\

N~K"E 9 tel9+

' N N

N_

N N

7.

Description of Work Replaced pump seat that teaked excessively during operation.

8.

Tests Conducted:

Hydrostatic [ ]

Pneumatic [ ]

Pressure psi Test Temp.

• F Nominal Operating Pressure [X)

Exempt [] Other [ ]

9.

Remarks National Board Ntsrber for the Code parts are as follows:

Upper seat stond NB1163 Sent holder NB1164

!O(,)

• I..

\\

l

=

CERTIFICATE OF COMPLIANCE

)

We certify that the statements made in this report are correct and this replacement conforms to the les of the ASME Code,Section XI.

(repair or replacement)

(# ITEM 66R 6, 19 Supervisor-ISI Date Signed s

Owner or Owner's Designee, Title CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid comission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Illinois and employed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the components described in this owner's Report during the period 05/11/94 to 09/09/94..and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a toss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

MM!

8[ Afr Commissions' /M S 8@

N Inspedor's signature National Board, State, Province fy[4/

19 jf[

Date 1

l t

i l

l l

4

l ILLINOIS POWER COMPANY FORM Nis-2 OWNER'S REPORT FOR REPA!RS OR REPLACEMENTS

,(p As Required by the Provisions of the ASME Code Section XI

\\y/

1.

Owner Illinois Power Company Data Report No. RF-5-17 Name Box 678, Clinton, IL 61727 Date October 5,1994 t

Address Sheet 1 of 1 2.

Plant Clinton Power Station Unit 1

Name Box 678, Clinton, IL 61727 MWR-D56266 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Illinois Power Co.

Type Code Synbol Stamp N/A Box 678, Clinton, Ittinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Reactor Core Isolation Cooling (NRI01)

Code Class 2 5.

(a) 1) Applicable Construction Code ( Piping

)

Section III 19 74 Edition, S74 Addenda, Code Cases NA (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81

Addenda, Code Cases N308 6.

Identification of Conpenents Repaired or Replaced and Replacement Conponents i

l ASME Code National Repaired Stanped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identification Built or Replacement No)

Piping Illinois Power NRIO1 NA 1R106A 1986 Replacement Yes x

N Nk WLSf94 N

N

~N N

7.

Description of Work Replace flange botting on piping Line 1R106A.

8.

Tests conducted:

Hydrostatic ( )

Pneumatic l Pressure psi Test Tenp.

'F Nominal operating Pressure l Exempt l 1 Other LX) Mome l/ T, 7 l/MU ttU s,/fs M a

9.

Remarks Material used: 2 flange studs, P.O. 528959, 090-1599. Heat E2 4 nuts, P.O. X34845, 08069, Heat A7 I

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this replacement conforms the r es of SME Code,Section XI.

(repair or replacement)

O C NGUG6 A

/O!8 $

199Y Signed /

.+

u ha. ; ~, ;r Date

[mer [Me, Title

%,$$y

/

i CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid connission issued by the National Board of Boller and Pressure vessel Inspectors and the State or Province of Illinois and employed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the conponents described in this Owner 8s Report during the period 08/25/94 to 10/25/94, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or inplied, concerning the examinations and corrective meatures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

Commissions Inspect [sSignature National Board, State, Province Date b

19 9

O

d o0 l' ILLIN0l$ POWER COMPANY FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provlsions of the ASME Code Section XI 1.

Owner Illinois Power Conpany Data Report No. RF-5-18 Name Box 678, Clinton, IL 61727 Date Novenber 2,1994 Address Sheet 1 of 1 2.

Plant Clinton Power Station Unit 1

Name Box 678, Clinton, IL 61727 MWR-D54477 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Ittinois Power Co.

Type Code symbol Stamp N/A Box 678, Clinton, iltinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Main Steam (NMS06)

Code Class 1 5.

(a) 1) Applicable Construction Code ( Valve

)

Section III 19 74 Edition, S75 Addenda, Code Cases 1516.1, 1567, 1622, 1635.1, 1677 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81

Addenda, Code Cases N308 6.

Identification of Conponents Repaired or Replaced and Replacement Components ASME Code National Repaired Stanped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identification Built or Replacement No)

)

Valve Anchor Darling E6214-156-1 NA 1821-F019 1979 Replacement Yes 7.

Description of Work Replaced valve disc.

8.

Tests Conducted:

Hydrostatic ! )

Pnetmatic [ ] Pressure osi Test Tenp.

'F Nominal operating Pressure L ]

Exempt t ] Other LX) Letter MMM89406 9.

Remarks Dise serf st Al2139.

OV

=

'i tz ' g CERTIFICATE OF COMPLIANCE We certify that the statements e in this report are correct and this replacement confo to ute f the E Code,Section XI.

(repair or replacement)

O+tMGsA

/

y

!/ ' D 19 9 T Signed ___[ der of 06n b s M Title 1.

An

^n-

.;. : L Date pg g 0

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Illinois and employed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the components described in this owner's Report during the period 10/19/94 to 11/02/94, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's P.eport. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

1. X

/

Commissions MM I*

/

8

[pector'sSihnature V

[

National Board, State, Province M8 19 f Date O

o ILLINOIS POWER COMPANY FORM Nis-2 OWNER'S REPORT FOR REPA!RS OR REPLACEMENTS

[b g

As Required by the Provisions of the ASME Code Section XI 1.

Owner Illinois Power Company Data Report No. RF-S-19 Name Box 678, Clinton, IL 61727 Date January 25, 1995 Address Sheet 1 of 1

2.

Plant Clinton Power Station Unit 1

Name Box 678, Clinton, IL 61727 MWR- 059027 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Illinois Power Co.

Type Code Symbol Stamp N/A Box 678, Clinton, Illinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Reactor Core Isolation Cooling (R!), Residual Heat Removal (RH) Code Clas; 1,2 5.

(a) 1) Applicable Construction Code ( Support

)

Section III 19 74 Edition, S74 Addenda, Code Cases WA (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81

Addenda, Code Cases N308 6.

Identification of Conponents Repaired or Replaced and Replacement Conponents ASME Code National Repaired Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or Conponent Manufacturer Serial No.

No.

Identification Built or Replacement No) rh Support Basic Eng.

NA NA 1RI10009X NA Replacement No Support Basic Eng.

NA NA 1RI10010X NA Replacement No

)

Support Basic Eng.

NA NA 1RH02008X NA Replacement No j

Support Basic Eng.

NA NA 1RH02013X NA Replacement No Support Basic Eng.

NA NA 1RH02014X NA Replacement No 7.

Description of Work Fabricate extension pieces, l

8.

Tests Conducted:

Hydrostatic I 2 Pneumatic [ ]

Pressure psi Test Tenp.

'F Nominal Operating Pressure [ ]

Exempt [ ] Other [X) VT 3 9.

Remarks Parts were received under the following TCN #'s!

R942880319 R943080348 R943080313 R943080334 R943080342 R943080331 R943080312 R942770332 R943080304 R943080326 R943080309 R942880227 R943080345 R943080292 R943080306

,Og

-w

e CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this rer>l neement conforms t the r les o r ASME Code,Section XI.

(repair or replacement)

)Q. p c u G-t wGsp

/

a.

.I

/.

0,_

. ~. ; ;;

Date [/M 19

)

Signed Obwfof0wner'sEgnee, Title Mfg $

/

CERTIFICATE OF INSERVICE INSPECiloN I, the undersigned, holding a valid consnission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Illinois and employed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the components described in this Owner's Report during the period 12/07/94 to 01/25/95, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association) b!

[

/4 Commissions Inspecto'r's Signature National Board, State, Province i

2' ~

1h Date l

i i

O 1

ILLIN0!$ POE R COMPANY

(-

FORM NIS-2 OuMER'S REPORT FOR REPA!R$ OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1.

Owner lltinois Power Company Data Report No. RF 5-22 Name Box 678, Clinton, IL 61727 Date March 28, 1995 Address sheet 1 of 1

2.

Plant Clinton Power Station Unft 1

Name Box 678, Cilnton, IL 61727 MWR D34513 Address Repair Organization P.O. No, Job No.

3.

Work Performed by It tinois Power Co.

Type Code Symbot Stamp N/A Box 678, Clinton, Ittinois 61727 Authorization No.

N/A Address Expfration Date N/A 4

Identiffcatlon of System Residual Nest Removat (NRH08)

Code Class 2 5.

(a) 1) Applicable Construction Code ( Pipino

)

Section III 19 74 Edition, $74 Addende, Code Cases NA (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81

Addenda, Code Cases N308 6.

Identification of Components Repelred or Replaced and Replacement Components ASME Code National Repelred Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serial No.

No, Identification Bullt or Replacement No)

Piping Illinois Power NRH06 NA 1RN31As,Bs 1965 Replacement Yes 7.

Description of Work Deleted snubbers 1RH71006S,1RH710115,1RH710115 and 1RM71018S. Attached stelntess steet teos to rear brackets and auxittery steet (Retired 1.1 Piece) In accordance with ECN M 48 and Plant Modification M-071.

8.

Tests CondJcted:

Nydrostatic [ ] Pneumatic ! )

Pressure osi Test Temp.

'F Nomlnal Operating Pressure [ ]

Exempt [ ] Other [X)

None 9.

Reamrks None Io

4 CERTIFICATE OF COMPLIANCE I

We certify that the statements in this report are correct and this replacemmt conforms the of A

Section XI.

(repair or replacement) bm

)!24

,19 h 8 Signed j

,e Date Owner kr #wne/'EWul

(/

/

CERTIFICATE OF INSERVICE INSPECTION I, the mdersioned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Itt(nols and agloyed by FMEA* (Arkweloht Mutual Insurance) of Massachusetts have inspected the cogonents described in this Owner's Report daring the period 11/15/94 to 03/28/95, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the reg.Irements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his egloyer makes any warranty, expressed or laptied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a toss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Associat{on)

De _0 k b

connaissions M M70 Inspector's Signature National Board, State, Province Date N

f6 19 Y

l 7

I i

ILLINDIS POWER COMPANY j

FORM NIS 2 OWNER'S REPORT FOR REPAIR $ OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1.

Owner It tinois Power ConcenY Data Report No. RF 5-24 Name I

Box 678, Clinton, IL 61727 Date March 31, 1995 Address sheet 1

of 1

2.

Ptant Clinton Power station Unlt i

Name l

Box 678, Cifnton, IL 61727 MWR- 034509 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Ittinois Power Co.

Type Code S)ebol Stamp N/A Box 678 Clinton, llt(nols 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Residual West Removal (NRH01)

Code Class 1 5.

(a) 1) Applicable Construction Code ( Pipinn

)

Sectf on III 19 74 Edition, 574 Addende, Code cases None (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 WB1

Addende, Code Cases W308 6.

Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repelred Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identification Bullt or Replacement No)

Piping Illinois Power NRH01 NA 1RH04812 1986 Replacement Yes T.

Decerlption of Work Deleted snubbers 1RH06006S and 1RH06023S. Attached steintess steel teos to j

brackets and auxit f ery steel (Retired in Place). Added additional welds to stcoort 1RH06022S in i

accordance with ECN % 25 and Ptont Modificotton M-071.

8.

Tests Conducted:

Hydrostatic ( )

Pneumatic ( )

Pressure est Test Temp.

'F Nominal operating Pressure ( 3 Except [ ] Other [X) None 9.

Remarks None

CERT!FICATE OF COMPLIANCE We certify that the statements made n this report are correct and this reotacement confo to 4 les the C

,Section XI.

(repair or replacement) 1 f!

,19 9 T Signed

/_SV u uA Date Ohr orlowN's' DENTINE

/

I CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Ittinois and esployed by FMEA* (Arkwright Mu+ual Insurance) of Massachusetts have inspected the components described in this owner's Report during the period 02/15/95 to 03/31/95, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his esployer makes any warranty, expressed or taptied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association) hd Commissions.T4L /2.90 o

Inspector's Signature National Board, State, Province AI I 19 1 Date 1

i O

ILLIN0!S POWER COMPANY FORM N!S 2 OWNERsS REPORT FOR REPA!RS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI J

1.

Owner Illinois Power Compenv Data Report No. RF 5-25 Name Box 678. Clinton. IL 61727 Date April 6, 1995 Address Sheet 1 __of 1

2.

Plant Clinton Power Stetton Unit 1

Name Box 678. Clinton IL 61727 MWR-NA Address Repair Organization P.O. sio, Job Wo.

3.

Work Perfonsed by Illinois Power Co.

Type Code symbol Stamp N/A tox 678. Clinton. Illinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Reactor Core Isoletion Coolins (NR101)

Code Class 2 5.

(a) 1) Apptlcable Construction Code ( Valwe 1 SectIon III 19 74 Edition, S75 Addende, code cases 1516.1. 1567, 1622, 1635.1. 1677 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81

Addende, Code Cases N308 6.

Identification of Components Repelred or. Replaced and Replacement components ASME Code National Repelred Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identiffcatlon Bullt or Replacement No)

Valve Anchor Darline E-6214 91 1 NA 1E51 F011 1979 Replacement Yes Valve Andor Darling E-6214 92 1 NA 1E51 F030 1979 Replacement Yes I

7.

Description of Work No field work performed. Date recort corrections ontv.

8.

Tests Conducted:

Hydrostatic [ } Pneumatic [ ]

Pressure ost Test Teep.

'F Nominal Operating Pressure ( )

Exempt [ ] Other [X) None 9.

Remarks CR81 95-03-136. Rev. O.

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this reolecement confo to les the

,Section XI.

(repair or replacement)

Signed

.A beb%

Y

, 19 9 I Date O M r dr Obdrs Des M Ilkie CERTIFICATE OF INSERVICE INSPECTION I, the mdersigned, holding a valid comeission Issued by the National Board of Boller and Pressure Vesset inspectors and the State or Province of Illinois and employed by FMEA* (Arkwetoht Mutual Insurance) of Messachusetts have Inspected the components described in this owner's Report charing the period 04/04/95 to 04/06/95, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or taptied, concerning the examinations ard corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be Llable in any menner for any personal Injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

I hMb CometasIons 1 44 /2-96 Inspector's signature National Board, State, Province Date

• / 6 1995 i

'Ol

ILLINOIS POWER COMPANY FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As ReqJired by the Provisions of the ASME Code Section XI 1.

Owner Ittinois Power Company Data Report No. RF 5 26 Name Box 678 CLInton, IL 61727 Date AprIt 6, 1995 Address sheet 1 of 1 2.

Plant CtInton Power Station Unit 1

Name Sou 678. Ctinton. IL 61727 MWR 057026 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Ittinois Power Co.

Type Code Syubol Stamp N/A Box 678. CtInton, Ittinois 61727 Authorization No.

N/A Address

[xpiration Date N/A 4.

Identification of System Residaat Heat Removal (NRN07)

Code Class 2 5.

(a) 1) Applicable Construction Code ( Valve

}

Section !!! 19 77 Ed{ tion, 577 Addende, Code Cases NA (b) Applicable Edition of Section XI UtiLired for Repairs or Replacements 1980 W81

Adderda, code Cases N308 6.

Identification of components Repelred or. Replaced and Replacement components ASME Code National Repaired Stamped Name of Name of Marmsfacturer Board Other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identificatlon Built or Replacement No)

I Valve Dresser TE 34459 NA 1E12F017B 1982 Replacement Yes 7.

Description of Work Modified vetve flance for a test connection per ECW 28826.

I i

I 8.

Tests condacted:

Nydrostatic ( )

Pneumatic I 1 Pressure est Test Temp.

'F Nominal Operating Pressure I 1 Exempt t 1 Other (X)

None

{

9.

Remarks None I

i i

O 1

I

e

.J CERTIFICATE OF COMPLIANCE We certify that the statements made in is report are correct and this replacement conforms t the of t ASME Section XI.

(repair or replacement) i b

Y

,19 Y Date signed

, f.

/

ownerfr ddnerl'd DedMJ CERTIFICATE OF IN3ERVICE INSPECTION 1, the mdersigned, holding a valid connission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Illinois and enployed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the components described in this owner's Report during the period 01/06/95 to 04/06/95, and state that to the best of ar/ knowledge and belief, the owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or (splied, concerning the examlnations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his esployer shall be liable in any manner for any personal injury or property demoge or a loss of any kind erlaine from or connected with this inspection. * (Factory Mutual Engineering Association)

%<1[k es E commissions 30 D0 Inspector's Signature National Board, State, Province Date 7

19 M l

l 1

l e'

ILLINOIS POLER COMPANY FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Re @ lred ty the Provisions of the ASME Code Section XI

,., Ot U

1.

Owner Ittinois Power Coscany Data Report No. RF-5 27 Name Sox 678 Cifnton, IL 61727 Date April 7, 1995 Address Sheet 1 of 1 2.

Plant CLfnton Power Station Unit i

Name Box 678 Clinton, IL 61727 W 34510 Address Repelr Organization P.O. No, Job No.

3.

Work Performed ty Ittinois Power Co.

Type Code symbol Stamp N/A Box 678, CtInton, Ittinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Residual Heat Resevel (NRN01)

Code Class 2 5.

(a) 1) Applicable Construction Code ( Pfofne

)

Section III 19 74 Edition, $74 Addenda, code cases Norw (b) Applicable Edition of Section XI Utilized for Repelrs or Replacements 1960 W81 AcHende, code Cases W308 6.

Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repelred Stamped Name of Name of Marufacturer Board Other Year Replaced (Yes or Component Manufacturer Serlet No.

No.

Identificatlon Built or Replacement No) p Piping ILllnois Power NRH01 NA 1RH04812 1986 Replacement Yes l

7.

Description of Work Deleted snubber 1RH630175. Attached stainless steet too to bracket and auxitfery steel (Retired in Place). Work performed in accordance with plant Nodification N-071 and ECW %26.

8.

Tests Condsted:

Hydrostatic [ ]

Pneumatic [ ]

Pressure est Test Tamp.

'F Nominet Operating Pressure [ ]

Exempt ( ) Other IX]

None 9.

Remarks None V

CERTIFICATE OF COMPLIANCE i

l We certify that the statements made in this report are correct and this reotacemect (repair or replacement) confo to t les o the A

,Section XI.

4!7

, 19 A

Date Signed

,2 t,

a orw,m

, se e

CERTIFICATE OF INSERVICE IN$PECTION I, the undersigned, holding a valid consission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Ittinois and employed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the components described in this Owner's Report durfts the period 11/15/94 to 04/07/95, and state that to the best of ury krowledge and belief, the Omer has performed examinations ard taken corrective measures described in this owner's Report in accordance with the reestrements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or laplied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or comected with this inspection. * (Factory Mutual Engineering Association)

D m QM w

Comalssions

• IZL /296 Inspector's Signature National Board, State, Province Date da4[ 7 19 9 [

O

,I

.l.

ILLINOIS POWER COMPANY FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS

('"'y As Required by the Provisions of the ASME Code Section XI 1.

Owner Ittinof s Power Conpany Data Report ko, RF-5-29 Name Box 678, CtInton, IL 61727 Date Aortl 11,1995 Address sheet 1 of 1 I

2.

Plant Cilnton Power Station Unit 1

Name Box 678, CtInton, IL 61727 le.tR- 034511 Address Repalr organization P.O. No, Job No.

3.

Work Performed by lltinois Power Co.

Type Code Syntaol Stanp N/A Box 678, Cilnton, Ittinols 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Residual Heat Removal (NRH01)

Code Class 2 5.

(a) 1) Applicable Construction Code ( Ploinq

)

Sectlon !!! 19 74 Edition, $74 Acklenda, Code cases None (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1930 _ V81 Ack$enda, Code Cases N308 6.

Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired Stanped Name of Name of Manufacturer Board other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identification Built or Replacement No)

(

Piping Illinois Power NRH01 NA 1RH31BA 1986 Replacement Yes R.J 7.

Description of Work Deleted snubber 1RH64004S. Attached steintess steet ten to auxittery steel and reer bracket (Retired 'n Ptece). Work was performed In accordance with Plant Modification M-071 arvf ECW 9577.

8.

Tests Conducted:

Hydrostatic ! ]

Pneunatic [ ] Pressure ost Test Temp.

'F Nominal Operating Pressure [ ]

Exenpt [ ] Other IX]

None 9.

Remarks None

)

'O l

.o CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this reotacement conforms to t. rules f the Code,Section XI.

(repair or replacement) k ob.a Date M />

,19M Slgned

.2.

OwnN ore 0M's' Designee 7 Titie d

'/

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holdlns a valld couaission lasued by the National Board of Boller and Pressure vesset inspectors and the State or Province of Ittinois and esployed by FMEA* ( Arkwright Jeutual Insurance) of Massachusetts have Inspected the components described in this owner's Report during the period 11/15/94_ to 04/11/95, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this Owwr's Report in accordance with the requirements of the ASME Code,Section XI.

Bv signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or taptied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enptoyer shall be liable in any manner for any personal injury or property damage or a loss of any kind erlsing from or connected with this Inspection. * (Factory Mutual Engineering Association) k-ConnissIons m 12.%

Inspector's Signature National Board, State, Province d9db /L 19 95~

Date

$9

)-

l ILLIN0!$ POWER COMPANY I

FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS

[

As Required by the Provisions of the ASME Code Section XI tb l

1.

Owner 1ttinois Power Company Data Report No. RF 5 30 Name Box 678, Clinton, IL 61727 Date Aorft 11, 1995 Addrete Sheet l of 1

2.

Plant Clinton Power Station Unit 1

Name Box 678, CtInton, IL 61727 MWR- 058946 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Ittinois Power Co.

Type Code Symbol Stanp N/A Box 678, Clinton, filinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Residual Heat Removat (NRH03)

Code Class 2 i

5.

(a) 1) Applicable construction Caie ( Valve

)

Section III 19 74 Edition, S75 Addenda, Code Cases None (b) Applicable Edition of Section XI Utilf red for Repairs or Replacements 1980 W81

AcHenda, Code Cases N306 6.

Identification of Components Repelred or Replaced and Replacement Conconents I

1 ASME Code National Repaired Stamped l

Name of Nase of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identification Bullt or Replacement No)

O

(

Valve Anchor Darling E6214 102 1 NA 1E12F031B 1979 Replacement Yes l

1 1

7.

Description of Work Replaced valve dise.

8.

Tests Conducted:

Hydrostatic [ ]

Pneumatic [ ]

Pressure est Test Tenp.

• F Nominal Operating Pressure IX]

Exempt [ ] Other )Q VT 2 9.

Remarks Dise received teder P.O. X-16826, TCN No. R950790?85, Serial No. U2062.

O

l I

4

/.

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this rectacement conforms to th rules o the A ode,Section XI.

(repair or replacement) n Date d

!/L

,19M

/>

[m<

Signed Owndr or M rks' be' signee, Title U

l CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid conmission issued by the Nat{onal Board of Boller and Pressure Vessel Inspectors and the State or Province of Illinois and enployed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the components described in this Owner's Report during the period __01/03/95 to 04/11/oS, and state that to the best of my knowledge end belief, the Owner has performed examinations and taken corrective sessures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his enployer : akes any warranty, expressed or (splied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personst injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

Allk uE Commissions M /2 94 Inspector's Signature National Board, State, Province Date d

43 19 Pr

.l...

• f ILLINCIS POWER COMPANY FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS O

As Required by the Provisions of the ASME Code Section XI 1.

Owner f t tinois Power ConcenY _

Data Report No. RF-5 31 Name Box 678, tilnton, IL 61727 Date Aorft 12, 1995 Address Sheet 1

of 1 2.

Plant Clinton Power Stetton (Jnit 1

Name Box 678, CtInton, IL 61727 MWR-D34514 Address Repair Organization P.O. No, Job No.

3.

Work Performed ly Ittinois Power Co.

Type Code Symbol Stanp N/A Box 678, CtInton, Ittinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Reactor core Isoletion Coottna (NRIO1)

Code Class 1 5.

(a) 1) Applicable Construction Code f Pipino 1 Section III 19 74 Edition, S74 Ad$enda, code Cases None (b) Applicable Edition of Section XI Utilized for Repelrs or Replacements 1980 W81 Addenda, code Cases N306 6.

Identification of Components Repalred or Replaced and Replacement Components ASME Code National Repalred Stanped Name of Name of Manufacturer Board Cther Year Replaced (Yes or Component Manufacturer Serfat No.

No.

Identification Built or Reptocement No)

D Piping Illinois Power NR101 NA 1R103C 4 1986 Replacement Yes i

1 j

7.

Description of Work Deleted snebers 1RI100075,1R1100085,1RI10009S 1R110010s. Instetted struts 1RI10009K and 1RI10010X. Retired cloe etene end auxittery steet In otace for 1RI10007S and 1R1100085. Work was perforined in accordance with Plant Modificottw. - m a and ECW 9571.

1 M nyl A4 %

8.

Tests Condsted:

Hydrostatic [ ] Pneumatic [ ]

Pressure est Test Tenp.

• F Nominal Operating Pressure I 1 Exempt t 3 Other (X) VT-3 9.

Remarks strut f abeleetion and receipt Informstfon documented on WIS 2 RF-519.

4 d

i p

y w

.,w

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this replacement confo to th so he SME

,Section XI.

(repair or replacement)

Date b

,19 h $

Signed

.. r d /e /

m OM or'0wrdr*s* Dest gneeM Le d

/

~

CERTIFICATE OF INSERVICE INSPECTION I, the urxlersigned, holding a valid cosalssion issued by the National Board of Boller and Pressure Vesset Inspectors and the State or Province of iltinois and enployed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the components described in this owner's Report during the period 11/15/94 to 04/12/95, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or laplied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a toss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

D 3) b commissions D M9h Inspector's Signature National Board, State, Province Date G

19 ih' b

d.

ILLINOIS POE R CCMPANY FORM NIS-2 OWNER'S REPORT (OR r.JPAIRS OR REPLACEMENTS As RegJired by the Provisions of the ASME Code Section XI 1.

Owner Ittinois Power Concany Data Report No. RF-5-32 Name

_ sox 678, Clinton, IL 61727 Date April 12, 1995 Address Sheet i of 1 2.

Plant Cifnton Power Station Unit 1

Name Box 678 Clinton, IL 61727 MWR D26507 Address Repair organization P.O. No, Job No.

3.

Work Performed by Ittinois Power Co.

Type Code Symbot Stamp N/A Box 678, CtInton, lltinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Residual Heat Removat (NRH08)

Code Class 2 5.

(a) 1) Applicable Construction Code ( Ploino

) ^$ection III 19 74 Edition, S74 Addende, Code Cases None (b) Applicable Edition of Section XI LJtilized for Repairs or Replacements 1980 W81 Addende, Code Cases N108 6.

Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or i

Component Manufacturer Serial No.

No.

Identification Built or Replacement No) m Piping Illinois Power NRH08 NA 1RH50AA 10 1985 Replacement Yes

]

Piping Illinois Pome NRH08 NA 1RH038A 12 1985 Reptocament Yes l

4 I

7.

Description of Work Deleted snubbers 1RH02006S,1RH02010S,1RH02015$,1RH02018s and 1RH02021$.

Retired rear brackets and auxiliary steet in place. Deleted sn(thers 1RH02008S 1RH02013S and 1RH02014S. Instet ted struts 1RH02008X,1RH02013X and 1RH02014X. Att work performed in accordance with Plant Modification M-071 and ECW 9544.

8.

Tests Conducted:

Hydrostatic ( )

Pneumatic ( )

Pressure est Test Tenp.

'F Nominal Operating Pressure [ ]

Exempt ( ) Other (X) VT 3 9.

Remarks strut f abrication and receipt information documented on N!S-2 RF-5-19.

-.m -

m

a CERTIFICATE OF COMPLIANCE We certify that the statements n this report are correct and this replacement confo to t e rules the

,Section XI.

(repair or replacement) q Date

/b

, 19 9 Signed n.

_is OwrM o[ OdrIs Designee [ Title

/

/

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid conselssion issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Illinois and employed by FMEA* (Arkwright kutual Insurance) of Nassachusette have inspected the components described in this owner's Report during the period 11/15/94 to 04/12/95, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or taptied, concerning the examinations and corrective measures described in this Owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind erfsing from or connected with this inspection. * (Factory Mutual Engineering Association) h _0) k l Commissions T4/ /29(,

Inspector's Signature National Board, State, Province Date d.C[ /3 19 W

.w W

A ILLINOIS POWER COMPANY

.FORN MIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI f..

.T n I.

Data Report No. ar 5 33

. 1.

Cuner Ittinois Power Company

.i i

Name 3

Bom 678. Clinton IL 61727 Date April 17.1995 i

j Mm ht 1 M 1 2.

Plant CtInton Power Station Unit 1

Name

'j Box 678. CtInton. IL 61727 MWR 052218 Address Repelr Organization P.O. No, Job No.

3 3.

Work Performed by Ittinois Power Co.

Type Code Symbot Stamp N/A i

l Box 678. Cttnton. Ittinolo 61727 Authorization No.

N/A I

Address Expiration Date N/A 4.

. Identification of System Residust West Removal (NRH08)

Code Class 1 1

l 5.

(a) 1) Applicable construction code ( Ploine 1 Section Ill 19 74 Edition, $74 Addende, j

Code Cases None i

(b) Applicable Editten of Section XI Utilized for Repelrs or Replacements 1999,,_ _g1,, Addende, Code Cases N308

- 6.

Idar$tification of Components Repelred or Replaced and Reptocessat Components 3

ASME i

Code j

l National Repaired Stamped l

i Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serfel No.

No.

Identification Built or Replacement No)

Piping Ittinels Power NRN08 NA 1RH09A18 1986 Replacement Yes e

i e

7.. Description of Work Remove ploe clamos ner ECW 29105.

i 8.

Tests Conducted:

Hydrostatic ! 3 Pneumatic ( )

Pressure osi Test Temp.

'F Nominal Operating Pressure ( )

Exempt ! 3 Other [X) None 9.

Remarks None a

e M

l J

i N

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this reotacement conforms to th ules of the E ode,Section XI.

(repair or replacement)

Signed

/.

a

/h.*>

,a A Date

/7 1995 Own/r or'O d r's'D Wenee Title 6

/

~

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid connission issued by the National Board of Boller and Pressure Vessel inspectors and the State or Province of lilinois and enployed by FMEA* (Arkwrloht Mutual Insurance) of Massachusetts have inspected the conponents described in this owner's Report during the period 03/31/95 to 04/17/95, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the A!J4E Code,Section XI.

By signing this certificate neither the Inspector nor his esployer makes any warranty, expressed or taptied, concerning the examinations and corrective saeasures described in this Owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

_C commissions TLL Mf4 Inspector's signature National Board, State, Provinc Date (7

19 96~

O

1 ILLINOIS POLER COMPANY FORM NIS 2 OWNER'S REPORT FOR REPA!RS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1.

Owner filinois Power Conpany Data Report No. RF 5 34 Name Box 678, Clinton, IL 61727 Date April 17,1995 Address Sheet 1 of 1 2.

Plant Clinton Power Stetton Unft 1

Name Box 678, Clinton, IL 61727 MWR-D57024 Address Repair Organizatlon P.O. No, Job No.

3.

Work Performed by lltinois Power Co.

Type Code Syebol Stanp N/A Box 678, Clinton, Ittinois 61727 Authorization No.

N/A Address Expf ration Date N/A 4.

Identification of System Residual Heat Removal (NRH07)

Code Class 2 5.

(a) 1) Applicable Construction Code ( Valve

)

Section til 19 77 Edition, S77 Addenda, Code cases NA (b) Applicable Edltlon of Section XI Utillzed for Repairs or Replacements 1980 W81 Addenda, code Cases N308 6.

Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired Stasped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identification Built or Replacement No)

Valve Dresser TE34457 NA 1E12F005 1982 Replacement Yes 7.

Description of Work Modify volve flange per ECW 28828.

I 8.

Tests conducted:

Nydrostatic ( )

Pneumatic ( ) Pressure osi Test Tenp.

• F Nominst Operating Pressure [ ]

Exempt [ ] Other [X)

None 9.

Remarks None QV

1 l

I l

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this rectneement confo to t rules o the A

,Section XI.

(repair or replacement) fu, h !/7

,199 8 Signed nA Date sA n

i Chror[0MrsTesignee,"iMYe 9

l CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boller aind Pressure Vessel Inspectors and the State or Province of Illinois ard esployed by FMEA* (Arkwrlaht Mutual Insurance) of Massachusetts have inspected the components described In this owner's Report during the period 01/06/95 to C4/17/95, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association) hI al Connissions EL /2 N Inspector's Signature National Board, State, Province 19 W Date O

ILLINOIS POWER COMPANY FORM N!S-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1.

Owner Ittinois Power ConipanY Data Report No. RF-5 35 Name Box 678 Clinton, IL 61727 Date April 18, 1995 Address Sheet 1 of 1 2.

Plant Clinton Power Station Unit i

Name Box 678, Clinton, IL 61727 MWR 057035 AMress Repair Organization P.O. No, Job No.

3.

Work Perforined by Ittinois Power Co.

Type Code S $ l Stamp N/A Box 678, Clinton, lltinois 61727 Authorization No.

N/A Address Expiration Date N/A 4

Identificatlon of System low Pressure Core Spray (NLP01)

Code Class 2 5.

(a) 1) Applicable Construction Code ( Valve

)

Sectfon III 19 77 Edition, S77 Addenda, Code cases NA (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 V81

Addenda, code cases N308 6.

Identification of Components Repelred or Replaced and Replacement components ASME Code National Repaired Stanped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identification Built or Replacement No)

Valve Dresser TE34469 NA 1E21F018 1982 Replacement Yes 7.

Description of Work Modified valve flance to instatt testino connection in accordance with ECW 28818, 8.

Tests Conducted:

Nydrostatic ( )

Pneumatic [ ]

Pressure ost Test Temp.

'F Nominal Operating Pressure [ ]

Exempt [ ] Other IX]

None 9.

Remarks None 1v

CERTIFICATE OF COMPLIANCE We certify that the statements made i isreportarecorrectandthis reotecement conforms o th les of i ASHE Section XI.

(repair or replacement)

,19 h h Signed A.

/4,_.

fs w fiq cate ownef'orlowrkr5 6esignee/ Tift /

d

/'

l CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid connission issued by the National Board of Boiler and Pressure Vessel Inspectors and the State or Province of Ittinois and enployed by FMEA* (Arkwrloht Mutual Insurance) of Massachusetts have inspected the cosponents described in. this owner's Report during the period 01/06/95 to 04/18/95, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or loplied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or.a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

WM S

Connissions M1_ /29/,

Inspector's Signature National Board, State, Province Date fin 19 I i

j i

O'

f.

ILLINOIS POWER COMPANY FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS

^

As Required by the Provisions of the ASME Code Section XI 1.

Owner Illinois Power Conpany Data Report No. RF-5 37 Name Box 678 CtInton, IL 61727 Date April 20, 1995 Address Sheet 1 of 1 2.

Plant Clinton Power Station Unit 1

Name Box 678, Cttnton, It 61727 MWR 053925 Address Repair Organization P.O. No, Job No.

3.

Work Perforewd by Illinois Power Co.

Type Code Symbol Stag N/A Box 678, CtInton, Ittinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Reactor Water Cleanup (RT)

Code Class 2 5.

(a) 1) Applicable' Construction Code ( Pipino 1 Section III 19 74 Edition, $74 Addenda, code cases None (b) Applicable Edition of Section XI Utilized for Repelrs or Replacements 1980 W81

Addenda, Code Cases N308 6.

Identification of Cogonents Repelred or Replaced and Replacement Components ASME Code National Repaired Staged Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identification Bullt or Replacement No)

Piping Illinois Power N/A N/A 1RT113A 1994 Replacement Yes a

f 7.

Description of Work Replace blind flances on oenetration 1MC074 Decon eenetration previously Instatted per Plant Modification RT 034.

8.

Tests Conducted:

Hydrostatic [ ]

Pneumatic LX)

Pressure 16.5 ost Test Temp.

>70

• F Nominal Operating Pressure [ ]

Exegt [ ] Other [ ]

9.

Rcearks Flances received on P. O. 550621. Rev.1. TCM #R942000207 and P.O. 550587 Rev. 2.

TCM #R942000223, heat #s1141, i f-i\\

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this replacement

]

conforms to t e rule of he Code,Section XI.

(repair or replacement) kw a m ern Y!

,19 9 T Signed

./A Date O M r'or M r's M ', Title d

/

CERTIFICATE OF INSERVICF INSPECTION 1, the undersigned, holding a valid commission issued by the Nations. Board of goller and Pressure vesset inspectors and the State or Province of it tinof s and enployed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the components described in this owner's Report during the period 04/04/95 to 04/20/95, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his esployer makes any warranty, expressed or laplied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his exployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association) bL cosimissions 324 /296 c-Inspector's Signature Wattonal Board, State, Province Date oc 199 7 O

i 1

1 ILLIN0!$ POWER COMPANY FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACENENTS m

As Required ty the Provlsions of the ASE Code section XI i

o 1.

Owner Ittinois Power Concenv Date Report No. RF 5 38 Name Sox 678, CtInton, IL 61727 Date Aerit 28, 1995 Address sheet 1 of 1 2.

Plant Clinton Power Station Unit 1

Name Box 678, Cilnton, IL 61727 MWR- 052220 Address Repair Organitetton P.O. No, Job Wo.

3.

Work Performed by Ittinois Power Co.

Type Code Syubol stamp N/A Box 678. Clinton, Ittinois 61727 Authorization No.

N/A Address Empiration Date N/A 4.

Identification of System Feedwater (NFWO1)

Code Class 1 5.

(e) 1) Applicable Construction Code ( Velve

)

Section 111 19 74 Edition, 575 Addende, code Cases 1516.1. 1567, 1622. 1635.1. 1677 (b) Applicebte Edition of Section XI Utilf red for Repelrs or Replacements 1980 W81 Addende, Code Cases N308 6.

Identification of Components Repelred or Replaced and Replacement Components ASNE Code National Repelred Steeped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serlet No.

No.

Identification Built or Replacement No)

Velve Anchor /Darline E6214-157 2 N/A 1821F0328 1980 Replacement Yes 1

7.

Description of Work Instatt ECW 28576 (replace valve ehef t cover, cover studs, cover nuts).

(VT-1 of bottina per manufacturer's CNTR.)

8.

Tests Conducted:

Hydrostatic ( )

Pneumatic [ ]

Pressure est Test Temp.

'F Nominst Operating Pressure DC Exempt ! 1 Other (X) VT-2 9.

Remarks Nodiflection kit received urder P.O. 549915. Rev.1. TCW No. R942700265. Meet No. C8789.

l 1

s f

L CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this reotacement conforms to rul of the Code,Section XI.

(repair or replacement)

Signed 11 A hw m af, Date

/

, 19 7I

~

ownefol0Nr's' Designee,TltLeV CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Ittinels and employed by FMEA* (Arkwright Mutual Insurance) of Messachusetts have inspected the components described in this owner's Report during the period 03/74/95 to' 04/28/95, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or implied, concerning the examinations and corrective seasures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be Lisbte in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association) hmM k Commissions "Et t.

/29(e Inspector's Signature National Board, State, Province Date Nan l 19 W I

l l

O i

l l

b ILLINOIS POWER COMPANY FORN Mts-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Regaired by the Provisions of the ASME Code Section XI 1.

Owner Ittinois Power ConipenY Data Report No. RF 5-39 Name Box 678 CtInton, IL 61727 Date April 28, 1995 Address sheet 1 of 1

2.

Plant Clinton Power Station Unit 1

Name Sox 678 Clinton, IL 61727 MWR-D57031 Address Repelr OrDanization P.O. No, Job No.

3.

Work Performed by Ittinois Power Co.

Type Code Symbol Stamp N/A Box 678, Clinton, Illinois 61727 Authoritation No.

N/A Address Expiration Date N/A 4.

Identification of System Residual Heat Removal (NRH01)

Code Class 2 5.

(a) 1) Applicable Construction Code i vatve 1 Section 111 19 77 Edition,. $78 Addenda, Code Cases N 100 (b) Applicable Edition of Section XI Utfilted for Repairs or Replacements 1980 W81

Addenda, Code Cases N308 6.

Identification of Components Repaired or Replaced and Replacement components lASME Code National Repaired Stanped Name of Name of Manufacturer Board Other Year Replaced (Yes or component Manufacturer Serial No.

No.

Identification Built or Replacement No)

Valve Crosby N64332-00-0003 NA 1E12F055A 1985 Replacement Yes i

l 7.

Description of Work Modify vetve flance to instatt test connection in accordance with ECN 28821.

Reotece intet studs.

8.

Tests condizted:

Nydrostatic [ ]

Pneumette [ ]

Pressure 130 osi Test Temp.

• F Nominal Operstlng Pressure [X1 Exempt I 1 Other [ ]

9.

Remarks Studs received under P.O. 532007. TCN No. R950070384.

\\

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this rectacement conf t he ru s of tb A Code,Section XI.

(repair or replacement)

!rtu o foam Date

/

199I Signed (Mne[ of own'er's Design 6h, Title d CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Bolter and Pressure Vessel Inspectors and the State or Province of Ittinois and enployed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the components described in this owner's Report during the period 01/10/95 to 04/28/95, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or laptied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his esployer shall be liable in any manner for any personal injury or property damese or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

Commissions TLL /29G Inspector s Signature National Board, State, Province e

Date Nau 2 19 E

)

O1

\\

J ILLINCIS POWER COMPANY FORM NIS 2 OWNER 85 REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code section XI g'U 1.

Owner It tinof s Power Company Data Report No. RF-5 40 Name Box 678, Ctinton, IL 61727 Date April 28, 1995 Address sheet 1 of 1 2.

Plant CtInton Power stetton Unit 1

Name Box 678 Clinton, IL 61727 MWR 050331 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Ittinois Power Co.

Type Code Syubot Stamp N/A Box 678 Clinton, IL tinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Feedwater (NFWO1)

Code Class 1 5.

(a) 1) Applicable Construction Code ( Vetve 1 Sectton til 19 74 Edition, $75 Addenda, code Cases 1516.1. 1567, 1622. 1635.1, 1677 (b) Applicable Edition of Section XI Utilfred for Repairs or Replacements 1980 W81

Addenda, Code Cases N308 6.

Identification of components Repaired or Replaced and Replacement (,ouponents ASME Code National Repaired Stamped Name of Name of Manufacturer Board other Year Replaced (Yes or component Manufacturer Serial No.

No.

Identification Built or Replacement No) valve Anchor-Darling E-6214-153 1 NA 1821F010A 1979 Replacement Yes 7.

Description of Work Replaced cover nuts (4).

8.

Tests condxted:

Hydrostatic ! ]

Pneunatic ( )

Pressure 963 pel Test Teap.

• F Nominal Operating Pressure (X)

Exempt [ ] Other ( )

9.

Remarks Cover nuts received mder P.O. X 16826 TCN No. R943230258.

Ob

.l CERTIFICATE OF COMPLIANCE i

We certify that the statements made in this report are correct and this reritacement conforms to the ru s of t Code, Section xt.

(repair or replacement)

Slgned A-4w$ f r A Date 8 /

,19k3 Chr Ew Er's Designee, TitlM CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comission issued by the National Board of Boller and Pressure vessel inspectors and the State or Province of Ittinois and enployed by FMEA* (Arkwelaht Mutual Insurance) of Massachusetts have inspected the components described in this owner's Report during the period 03/27/95 to 04/28/95, and state that to the best of my knowledge '

ard belief, the owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or laptied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association) den b [

Cournissions ZL L- / 2 Slo inspector's Signature National Board, State, Province Date b2 193 6 J

1 0

h ILLIN0l$ poler COMPANY FORM NIS 2 OLAIER'S REPORT FOR REPAIRS OR REPLACEMENTS

(

As Required by the Provisions of the ASME Code Section XI 1.

Owner Ittinois Power company Data Report No. RF 5-42 Name Box 678 Clinton IL 61727 Date April 28,1995 Address sheet 1 of 1 2.

Plant CtInton Power Station Unit 1

Name Box 678, CtInton, IL 61727 MWR- 058983 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Ittinois Power Co.

Type Code Synbot Stamp N/A Box 678. CtInton, It tinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Reactor Recirculation (NGE01)

Code Class 1 5.

(a) 1) ApptIcabte construction Code ( Pue

)

SectIon !II 19 71 Edltion, V73 Addenda, Code Cases None (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1960 W81 Addenda, code Cases N306 6.

Identification of components Repaired or Replaced and Replacement Components ASME Code National Repaired Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serlet No.

No.

Identification Bullt or Replacement No)

Ptap Singham-Willamet"e 14217102 NS-395 1833 C0018 1977 Replacement Yes 7.

Description of Work Reotaced pue seat. The seat for thle replacement was assenbled usino replacement spare parts.

8.

Tests Condacted:

Hydrostatic ( )

Pneumatic [ ] Pressure nel Test Temp.

'F Nominst Operating Pressure (X)

Exempt [ ] Other [ ]

9.

Remarks Instatted upper atand S/W 1436163 1. seat holder S/N 23N03-4.

The reotacement parts were reconciled to the original construction code by the manuf acturer and documented in a letter dated 4 30-92.

1 4

- -. - - - - - ~,........

w CERTIFICATE OF COMPLIANCE We certify that the statements made.Jn this report are correct and this replacement conforms to e les the A h,SectionXI.

(repair or replacement)

I

/

,19 f T Signed rt

,m

_e a >u no Date O M ol O h '/ Desl 'onee, Iltte 6~

l CERTIFICATE OF INSERVICE INSPECTION I, the mdersianed, holding a valid commission issued by the National Board of Bolter and Pressure Vessel Inspectors and the State or Province of Ittinois and esployed by FMEA* (Arkwrlaht Mutual Insurance) of Massachusetts have inspected the components described in this Owner's Report during the period 10/17/94 to 04/28/95, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or isplied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his esployer shall be liable in any manner for any personal injury or property damage or a toss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

I h.0] k oi Commissions Et /M Inspector's Signature National Board, State, Province Date NLu l

19 %

e

J,.

ILLINOIS POWR COMPANY FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS i

As Required ty the Provisions of the ASME Code Section XI

\\

1.

Owner lltinois Power Conceny Data Report No. RF-5-44 Name-Box 678. Clinton, IL 61727 Date April 28. 1995 Address Sheet 1

of 1 2.

Plant Clinton Power Station Unit i

Name Box 678, Cttnton, IL 61727 MWR 056628 Address Repair Organization P.O. No, Job No.

3.

Work Performed by lttinois Power Co.

Type Code Symbol Stamp N/A Sox 678, CtInton. Ittinois 61727 Authorization No.

N/A Ackfress Expiration Date N/A 4.

Identification of System Low Pressure Core Spray (MtP01)

Code Class 1 5.

(a) 1) Applicable construction Code ( valve

)

Section !!! 19 74 Edition, 575 Addende, Code cases 1516.1, 1567. 1622, 1635.1. 1677 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81 Addenda, Code cases W308 6.

Identification of components Repaired or Replaced and Replacement Components ASME Code i

National Repaired Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or component Manufacturer Serlet No.

No.

Identification Built or Replacement No) n valve Anchor / Darling E-6214-6-1 NA 1E21 F005 1979 Replacement Yes U

t 7.

Description of Work Modify vetve disc in accordance with Plant Modif cetion M-082 and ECN 28512.

l 8.

Tests conducted:

Hydrostatic ( 1 Pneumatic ( ) Pressure 960 pel Test Temp.

'F Nominst Operating Pressure DO Exempt ( ) Other ( )

9.

Remarks None D

e

~w,,

CERTIFICATE OF COMPL!ANCE We certify that the statements made in this report are correct and this replacement conforms to, r s of.h ASME Code,Section XI.

(repair or replacement) hu fa.. " A Date

/

,19 Y[

Signed t_

IrVf,m t O M r br k ris Designee, Tit N CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid consnission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Ittinois and employed by FMEA* (Arkwright Mutual insurance) of Massachusetts have inspected the couponents described in this owner's Report during the period 02/01/95 to 04/28/95, and state that to the best of my knowledge and belief, the Omer has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or isplied, coswnirs the examinations ard r.orrective seasures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

E connissions rzL /2 %

Inspector's Signature National Board, State, Province Date Mo.w 2.

19 1 d

1 l

). w -

=

ILLINCIS POWER COMPANY FORM MIS 2 OWNEReS REPORT FOR REPAIRS OR REPLACEMENTS j

As Required by the Provisions of the ASME Code Section XI n

1.

Owner ItLInols Power Company Data Report No. RF-5 46 Name Box 678. Clinton. IL 61727 Date April 28. 1995 Address Sheet 1 of 1 2.

Plant CLInton Power Station Unit 1

Name Box 678. Clinton. IL 61727 MWR-D50332 Address Repair Organization P.O. No, Job Wo.

3.

Work Perfonned by IttInols Power Co.

Type Code Symbol stamp N/A Box 678. CLInton, tillnols 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Feedwater (NFWO1)

Code Class 1 5.

(a) 1) Applicable Construction Code ( valve 1 SectIon 111 19 74 Edition, S75 Addenda, code Cases 1516.1. 1567. 1622. 1635.1. 1677 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81 Addenda, Code Cases ' N308 6.

Identification of Components Repaired or Replaced and Replacement Components ASME j

Code i

National Repaired Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Seriet No.

No.

Identification Bullt or Replacement No)

Valve Anchor / Darling E-6214-153-2 NA 1821 F0108 1979 Replacement Yes s

l 7.

Description of Work Rectaced hlnoe oln cover studs end nuts.

8.

Tests Conducted:

J Nydrostatic t ]

Pneumatic t 3 Pressure 963 osi Test Temp.

'F Nominst operating Pressure LX)

Exempt t ) Other 1 3 9.

Remarks cover studs received on P.O. X 16782. TCN No. R943230301.

Cover nuts received on P.O. X 16826. TCN No. R943230258.

i

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this repl acement conforms to he rules of be)LSME Code, section XI.

(repair or replacement) b A-# /

"A Date

/

,1993 Signed O d r Er b r's M onee, Titl 8

/

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Ittinois and enployed by FMEA* (Arkwrlaht Mutust Insurance) of Massachusetts have Inspected the components described in this owner's Report daring the period 03/21/95 to 04/28/95, and state that to the best of my knowledge and belief, the owner has perfonned examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the inspector nor his emptcyer makes any warranty, expressed or taptled, concerning the examinations ard corrective measures described in this owner's Report. Furthermore, nelther the inspector nor his enptoyer shall be liable in any manner for any personal injury or property damage or a toss of any klrd arising from or connected with this inspection. * (Factory Mutual Engineering Association)

% -- $l b cuil Connissions TLt. /f M Inspector's signature National Board, State, Province Date M*M 1

19X

)

l l

lO'

L.

ILLIN0!$ POWER COMPANY FORM NIS-2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS I'

As Required ty the Provisions of the ASME Code Section XI 1.

Owner fit (nols Power ConcenY Data Report No. RF 5-47 Name Sox 678. Clinton. IL 61727 Date April 28, 1995 Address Sheet 1 of 1

2.

Plant CtInton Power stetton Unit i

Name Box 678. Clinton IL 61727 MWR D57102 Address Repelr Organization P.O. No, Job No.

3.

Work Performed by Ittinois Power Co.

Type Code Symbol Stamp N/A Box 678, Clinton, lit (nols 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identificaticn of System Mein Steam (NCE02)

Code Class 1.3 5.

(a) 1) Applicable Construction Code ( see Remarks

)

section III 19

Edition, Addende, Code Cases None (b) Applicable Edition of Section XI Utilf red for Repairs or Replacements 1980 W81

Addenda, Code Cases N308 6.

Identification of Components Repaired or Reptoced and Replacement Components ASME Code National Repaired Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or component Manufacturer Serial No.

No.

Identification Built or Replacement No)

SRV Dikkers 160783 60 1B21F0518 1978 Replaced Yes 7.

Description of Work Reptoced safety retlef volve due to seat teekene.

8.

Tests Conducted:

Hydrostatic ! 1 Pr N. etic ( ) Pressure Dal Test Tenp.

'F Nominal Operating Pressure (X)

Exempt [ ] Other [ ]

9.

Remarks NY 1 Date Report for this rootocement is previously filed with NS Date Report simplement NCE02.

5e) Anot f eebte Construction Code for SRys is 1974 s-76, for Mein steam pipino is 1974-575. for sRV discheroe pleino is 1977 W77. and exhaust teekoff pipino is 1974-574 The bottino seteriets used durino this reolocement were received as follows: Intet flance studs P.O. 537683. 547065; Intet fIenge nuts P.O. 552659; outtet fIenge sttds P.O. 537683; outtet fIenge nuts P.O. 552659; stb exhaust flance stu:Is P.O. X 34843; stb exhaust flance nuts P.O. 551126.

l CERTIFICATE OF COMPLIANCE We certify that the statements in this report are correct and this rent ecemnt conf to. rule f the Code, section XI.

(repair or replacement)

[evwA Date I /

, 19 kI Signed

.. l4 L 4 rde r's M Title k

/

CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comission issued by the National Board of Boller and Pressure Vessel inspectors and the State or Province of Illinois and enployed by FMEA* ( Arkwright Mutual insurance) of Massachusetts have inspected the components. described in this Owner's Report during the period 04/19/94 to 04/28/95, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or taptied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the insoector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association) b

.. b Comissions TLL /29/o Inspector's signature National Board, State, Province Date Su /_

19)E J

l l

l 9

l

\\

l l

?

ILLINOIS POWER COMPANY FORM NIS 2 OWNER'S REPORT FOR REPA!RS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI Y

1.

Owner Ittinois Power Company Data Report No. RF-5 48 Name Sox 678. Cttnton. IL 61727 Date Aorft 28. 1995 Address Sheet i of 1 2.

Plant Clinton Power Statlon Unit i

Name Box 678. Citnton. IL 61727 MWR- 058953 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Ittinois Power Co.

Type Code Symbol Stamp N/A Box 678. Clinton. Illinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Main Steam (NGE02)

Code Class 1.3 5.

(a) 1) Applicable Construction Code (See Remarks 1 Section III 19

Edition, Addenda, Code Cases None (b) Applicable Edition of Section XI Utilized for Repstrs or Replacements 1980 W81

Addenda, Code Cases N308 6.

Identification of Components Repaired or Replaced and Replacement Conponents ASME Code National Repaired Stasped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identification Bullt or Replacement No)

' /"]

Sav Dikkers 160911 130 1B21F047B 1978 Replaced Yes l

7.

Description of Work Reptoced safety relief vetve due to seet teekene' NV-1 Data Report for this rectacement is previously filed with NS Data Report Stcotement NGE02.

8.

Tests Conducted:

Hydrostatic ! ] Pneumatic [ ]

Pressure ost Test Tenp.

'F Noelnal operating Pressure (X)

Exempt [ ] Other [ ]

9.

Remarks Sa) Applicable Construction Code for SRVs is 1974 576, for Main Steam Dipino is 1974-S75, for SRV discharge pipino is 1977-V77, and exhaust teskof f pipino is 1974-574.

The bottino materiets used d;rino this replacement were received as follows: intet flance studs P.O. 547065; Intet flance nuts P.O. 552659; outlet flance stude P.O. 537683. 528861; sth exhaust flance studs P.O. 532265; sub exhaust flance nuts P.O. 551126.

v,

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this rectacement conforms to (e rules of the Code,Section XI.

(repair or replacement)

[es,

/

, 19 9 Signed

/J A

^

_rio Date Der $r br#'s Designee / Title

/

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid comission issued by the National Board of Boller and Pressure Vessel Inspectors ard the State or Province of Ittinois and egloyed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the components descrit>.d in this owner's Report during the period 01/18/93 to 04/28/95, and state that to tne tnst of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or isptled, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

%=M commissions TLL- / P-9 f,-

o-Inspector's Signature National Board, State, Province Date bb 19 T 1

l l

l l

0,. -.

.* s b.

ILLIN0IS POWER COMPANY FORM NIS-2 DWNER85 REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI 1.

Owner Ittlnois Power Conceny Data Report No. RF-5 49 i

Name l

Box 678. Clinton. IL 61727 Date April 28, 1995 Address sheet 1 of 1 2.

Plant Clinton Power Station Unit i

Name Box 678. Ctinton. IL 61727 MWR- 057101 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Ittinois Power Co.

Type Code Spbot Stamp N/A Box 678. Clinton. Ittinois 61727 Authorization No.

N/A Address Expiration Date N/A 4

Identification of System Main Steam (NGE02)

Code Ctess 1.3 5.

(e) 1) Applicable Construction Code (See Remarks

)

Section III 19

Edition, Addende, Code Cases None (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81 Addende, code Cases N308 6.

Identification of Components Repelred or Reptoced and Replacement Components ASME Code National Repaired Stamped Name of Name of Nanufacturer Board Other Year Replaced (Yes or Component stanufacturer Serial No.

No.

Identification Built or Replacement No)

(~~x SRV Dikkers 160540 45 1821F041D 1978 Reptoced Yes k

i I

l 7.

Description of Work Reotaced safety relief vetve due to seat teekene! NV 1 Date Report for this rectacement is previously filed with N5 Data Report Supplement NGE02.

8.

Tests condacted:

Nydrostatic ( )

Pneumatic ( 3 Pressure est Test Temp.

___ F Nominal Operating Pressure (X) Exempt [ ] Other ( 1 9.

Remarks Se) Anottemble construction Code for SRVs is 1974-S76. for Mein Steam otolno is 1974 575, for SRV discheroe cloino is 1977-V77, and exhaust teskoff cloing to 1974-S74.

The bottino materiets used durino this rectacement were received as follows: Intet flance studs P.O. 537683; Intet fIenge nuts P.O. 552659; outiet f(anoe studa P.O. 537683; outiet fienge nuts P.O. 552659; sub exhaust flenoa studs P.O. X-34843; sub exhaust flance nuts P.O. 551126.

jn i

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this replacement conforms to the le of ths Code,Section XI.

(repair or replacement)

Signed G fA.

de f,y /N\\

Date

/

,19hI OM o/ Mrs Desigide, Titl7 CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Illinois and enployed by FMEA* (Arkwrlaht Mutual Insurance) of Massachusetts have inspected the conponents described in this Owner's Report during the period 04/19/94 to 04/28/95, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any amnner for any personal injury or property damage or.a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association) hdM s

Conunissions

.II.L /29/o Inspector's Signature National Board, State, Province Date Maa 1 1997_

J O

A a.

ILLINols POWER COMPANY FORM NIS-2 OWNER'S REPORT FOR REPA!RS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI f

1.

Owner Ittinois Power Company Data Report No. RF-5-50 Nann Box 678, Clinton, IL 61727 Date April 28, 1995 Address Sheet 1

of 1 2.

Plant Cttnton Power Station Unit i

Name Box 678, Citnton, IL 61727 E - D57100 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Ittinois Power Co.

Type Code Syubot Stamp N/A Box 678, CtInton, lltinofs 61727 Authorf ration No.

N/A Address Expiration Date N/A 4.

Identification of Systes Main Steam (NCE02)

Code Class 1,3 5.

(a) 1) ApptIcable Construction Code (See Remarks

)

5ectIon III 19

Edltion, Addenda, Code Cases None (b) Applicable Edition of Section XI Utilized for Repatra or Replacements 1980 W81 Addenda, Code Cases N308 6.

Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired Staaped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serist No.

No.

Identification Bullt or Replacement No)

O SRV Dikkers 160943 205 1B21F041C 1978 Replaced Yes i

7.

Description of Work Rectaced safety retlef valve due to seat teekene. WV 1 Data Report for this replacement is previounty filed with W5 Data Renort supplement Wor 02.

8.

Tests Conducted:

Hydrostatic [ ]

Pneunatic [ ]

Pressure est Test Tamp.

'F Nominal Operating Pressure IX)

Exempt ( ) Other I 1 9.

Remarks Sa) Anoticable Construction Code for SRVs is 1974 576, for Main Steam plotna is 1974 575.

for SRV discharge oloino le 1977-V77, and exhaust tenkoff plotna is 1974 574 The bottino meteriets used durino this replacement were received as follows; intet flance studs P.O. 537683; intet flance nuts P.O. 552659; outlet flance studs P.O. 537683; outlet flance nuts i,

P.O. 552659; sub exhaust flance studs P.O. X-34843; sub exhaust f tange nuts P.O. 551126.

V( D

\\

CERTIFICATE OF COMPLIANCE We certify that the statement made in this report are correct and this replacemmt conforms tp' e

t's of ASME Code,Section XI.

(repair or replacement)

Date

/

,19 h b b hM Signed

_/4 4.

M of Ewner's Des fonee, TitlI CERTIFICATE OF INSERVICE INSPECTION I, the undersigned, holding a valid comission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Illinois and enployed by FMEA* (Arkwelcht Mutual Insurance) of Massachusetts have inspected the components described in this owner's Report during the period 04/19/94 to 04/28/95, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his enployer makes any warranty, expressed or laptled, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising f rom or connected with this inspection. * (Factory Mutual Engineering Association)

I

%dM oi /

Comissions

.TLL 129/,

Inspector's Signature National Board, State, Province Date d e-2.

19 1 O

~O

J,s ILLINOIS POWER COMPANY FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS As Required by the Provisions of the ASME Code Section XI n

i

\\

V 1.

Owner Ittinois Power Conpany Data Report No. RF-5 51 Name Box 678, Clinton, IL 61727 Date Aprit 28, 1995 Address Sheet 1 of 1 2.

Plant Cilnton Power Station Unit 1

Name Box 678, CtInton, IL 61727 MWR- 026389 Address Repair Organization P.O. No, Job No.

3.

Work Perfo'ned by Ittinois Power Co.

Type Code Syubot Stamp N/A Box 678, tilnton, Ittinois 61727 Authorf ration No.

N/A Address Expiration Date N/A 4

Identification of System Stan & y Llauld Control (NSC01)

Code Class 1 5.

(a) 1) Applicable Construction Code ( Valve

)

Section Ill 19 77 Edition, S77 Addenda, Code Cases

$ lone (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81

Addenda, Code Cases N308 6.

Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or component Manufacturer Serlet No.

No.

Identification Bullt or Replacement No) i s

valve Conax 69 NA 1C41-F004A 1976 Replacement Yes U

i l

l 7.

Description of Work peoteced ortmer assen6tv and intet fittino followina 9015.02.

8.

Tests Conducted:

Hydrostatic [ ] Pneumatic [ ]

Pressure osi Test Temp.

• F Nominal Operating Pressure (X)

Exempt [ ] Other [ ]

9.

Remarks J atve rectacement kit received on P.O. 524092. TCN No. R950070222.

W

\\

a CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this reotecement conforms to rut s of th A Code,Section XI.

(repair or replacement)

Date

/

,19 h b Signed

/

O. /A,

bwm /h odr dr Or's D'eM Title d CERTIFICATE CF INSERVICE INSPECTION I, the indersigned, holding a valid cormaission Issued by the National Board of Boller and Pressure vessel Inspectors and the State or Province of Illinois and enployed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the components described in this Cwwr's Report during the period 02/11/94 to 04/28/95, and state that to the best of arf knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or taptied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

C 4b b

Consnissions.T14 /2Sfo inspector's signature National Board, State, Province N% J 1995 Date

)

O

.L i

ILLINOIS POWER COMPANY FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS

'p As Required try the Provisions of the ASME Code Section XI 1.

Owner fillnois Power CompenY Data Report No. RF 5 52 Name I

Box 678 Clinton IL 61727 Date April 28,1995 Address Sheet 1 of 1 2.

Plant Clinton Power Station Unit i

Name Box 678 Clinton IL 61727 MWR D56631 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Ittinois Power Co.

Type Code Syebot Stamp N/A Box 678. Clinton, 11tinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Residual Nest Removal (NRH01)

Code Class 1 5.

(a) 1) Applicable Construction Code ( Valve

)

Section III 19 14 Edition, $75 Addende, code cases 1516.1. 1567, 1622. 1635.1. 1677 (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81 Addende, code Cases N308 6.

Identification of components Repelred or Replaced and Replacement Components i

ASME Code National Repelred Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identification Built or Replacement No)

Valve Anchor / Darling E-6214 142 1 NA 1E12F042C 1978 Replacement Yes 7.

Description of Work Modified reotacement disc in accordance with Plant Modification M-082 and ECM 28511.

8.

Tests Conducted:

Hydrostatic ( )

Pneumatic [ ]

Pressure osi Test Temp.

'F Nominal Operating Pressure (X)

Exenpt ( ) Other [ ]

Di' e received on P.O. X-16773. TCN No. R950200309.

9.

Remarks s

O

s CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this replacement confo to les th Ae Code,Section XI.

(repair or replacement)

/

/

Signed

/, l

$)

,199 5 hm i n 3M Date 1

,fr rhr

'sTeTTynee, Title d '

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid commission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Ittinois and employed by FMEA* (Arkwright Mutunt Insurance) of Massachusetts have inspected the conponents described in this Owner's Report dJring the period 02/01/95 to 04/28/95, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his enptcyer makes any warranty, expressed or inplied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his employer shall be liable in any manner for any personal injury or property damage or a toss of any kind arising from or connected with this inspection. * (Factory Hutual Engineering Association)

{

k Connissions EL / 2 fl.e Inspector's Signature National Board, State, Province Date MS 199 7

)

l

~O

e W J4 D S ! +1 ILLI:.VIS POWER COMPANY FORM NIS 2 OWNEtat REPORT FOR REPAIRS OR REPLACEMENTS

( p, As Required try the Provisions of the ASME Code Section XI N) 1.

Owner Illinois Power ConcenY Data Report No. RF 5 53 Name Sox 678, Clinton, IL 61727 Date Aorit 28, 1995 Address Sheet 1

of 1 2.

Plant CtInton Power Station thilt 1

Name Box 678, Clinton, IL 61727 MWR-D56307 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Ittinois Power Co.

Type Code Syubot Stamp N/A Box 678, Clinton, litlnols 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Reactor Core Isolation Coottna (NRIO1)

Code Class 1 5.

(a) 1) Applicable Construction Code ( Valve

)

Section III 19 74 Edition, $75 Addenda, Code cases None (b) Applicable Edition of Section XI Utttf red for Repairs or Replacements 1980 W81

Addende, Code Cases N308 6.

Identification of Components Repaired or Replaced and Replacement conponents ASME Code National Repaired Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identification Built or Replacement No)

Valve Anchor /Darline E-6214 5 1 NA 1E51F063 1979 Replacement Yes 7.

Description of Work Reotaced volve disc.

8.

Tests condacted:

]

Hydrostatic ! ) Pneumatic ( ) Pressure est Test Tenp.

• F l

Nominal Operating Pressure [X]

Exempt ( ) Other [ ]

1 9.

Remarks Disc received on P.O. 540675. TCN No. R930710030, Serist No. P1734.

l bU

'e

^l CERTIFICATE OF COMPLIANCE We certify that the statements in this report are correct and this reptocement confo to les the code,Section XI.

(repair or replacement)

Signed A

,,A

+;,[iro Date

/

19 f 3 owder el O M 's9 esIgnee,N itte d

/

CERTIFICATE OF INSERVICE INSPECTION 1, the undersigned, holding a valid consnission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Ittinois and ecptoyed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the cosponents described in this owner's Report during the period 01/06/95 to 04/28/95, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the inspector nor his enployer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Furthermore, neither the Inspector nor his enployer shall be liable in any manner for any Report.

personal injury or property damage or a loss of any kind arlaing from or connected with this inspection. * (Factory Mutual Engineering Association)

Comissions 3 4-

/2 9(,

W - Ol k Inspector's Signature National Board, State, Province Date NLu S 19Y A

O

3 I

i ILLINCIS POWER COMPANY FORM NIS 2 CWWERaS REPORT FOR REPAIRS OR REPLACL fS As RegJired by the Provlsions of the ASME Code Section XI

,(OV 1.

Owner Ittinois Power conoeny Data Report No. RF 5 54 Name Box 678. CtInton, IL 61727 Date April 28, 1995 Address Sheet 1

of 1

2.

Plant Clinton Power Stetton Unit i

Name Box 678, Clinton IL 61727 MWR-D33024 Address Repair Organization P.O. No, Job No.

3.

Work Perforeed by Ittinois Power Co.

Type Code Synbol Stamp N/A Box 678, Clinton, Illinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Containment Penetration Code Class MC, 2 5.

(a) 1) Applicable Construction Code ( Penetration

)

Section 111 19 74 Edition, S74 AMende, Code Cases None (b) Applicable Edition of Section XI Utilized for Repelrs or Replacements 1980 W81 Addenda, Code Cases N308 6.

Identification of Components Repaired or Replaced and Replacement components ASME Code National Repelred Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Manufacturer Serial No.

No.

Identification Built or Replacement No)

Penetration CB&I 1MC-74 NA iMC-74 1977 Replacement Yes D

Plping Ittinois 'ower NA NA 1RT113A6 1993 Replacement No Sgport Ittinois Power NA NA 1RT50001A 1993 Replacement No support I!Linols Power NA NA 1RT50002G 1993 Reptacement No Valve

• Yarway C1019 NA 1G33F428 1985 Replacement Yes Valve

• Yarway C0976 NA 1G33F429 1985 Replacement Yes 7.

Description of Work Modified spare contelrvnent penetration 1MC 74 to provide for a permanent access connection for use daring chemicot decontamination activities.' The work consisted of removet of the blank head fittings and instettetton of a new head fittina, pipe penetration.

support and provisions for LLRT testino. The work was completed in accordance with (see Remarks) 8.

Tests conducted:

Hydrostatic [ ]

Pneumatic [ ]

Pressure ost Test Tenp.

• F s

Nominet Operating Pressure ( 1 Exempt [ ] Other IX3 LLRT 9.

Remarks Description of Work (cont'd): Ptont Modification RT 034 and ECW 9799. Condition Report 1-94-01-002 was written to disposition the blind flonne meteriet traceability issue identified durina MWR closure. Flance reptocement documented on NIS 2 RF 5-37.

l The meteriet items of the modification under this NIS 2 consists of a head fittino, pipe essen6ty, flances, botting ord stoport etenents. The materiets used were secceted as fot tows:

~Q Head fittina - R931680005 6" pipe - R931660066 6" flances - R93580034.

V support assy. Item 1&2, 1RT500020 - R93168006, 16 studs (Mt. Cd. 05) - 012504 of P.O.

511167, 32 nuts (Mt. Cd. A8) - 07666 of P.O. X34847.

• These volves are listed for information only.

CERTIFICATE OF COMPLIANCE

}

We certify that the statements made in this report are correct and this replacement j

conforms to - vte f thef SME Code,Section XI.

(repair or replacement)

Signed o,. #t

/ WA Date f/

,19 h E O M of D N rEs desig A, Tit h CERTIFICATE OF INSERY1CE INSPECTION I, the undersigned, holding a valid comission issued by the National Board of Boller and Pressure Vesset Inspectors and the State or Province of Illinois and enployed by FMEA* (Arkwright Mutual Insurance) of Massachusetts have inspected the conponents described in this owner's Report during the period 08/30/93 to 04/28/95, and state that to the best of my knowledge and belief, the Owner has performed examinations and taken corrective measures described in this owner's Report In accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his esployer makes any warranty, expresse( or taptied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspector nor his esployer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association) d commissions TLL /f96 Inspector's signature National Board, State, Province Date M 88 19 9 [

.)

9 O"

L 1

i i

).

1

.e ~

ILLIN0l$ POWER COMPANY FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEMENTS 1

As RegJired by the Provisions of the ASME Code Section XI

,~

, py) 1.

Owner Illinois Power Comment Data Report No. RF 5-55 Name Sox 678, Clinton IL 61727 Date April 28, 1995 Address Sheet 1 of 1 2.

Plant Cttnton Power Stetton Unit 1

Name Box 678 Clinton, IL 61727 MWR-DS7030 Address Repelr Organization P.O. No, Job No.

3.

Work Perforined by Ittinois Power Co.

Type Code Syubol Stamp N/A Box 678 Clinton, Ittinois 61727 Authorlastion No.

W/A Address Expiration Date N/t 4

Identification of System Res{ dual Meet Removal (NRH01)

Code class 2 5.

(a) 1) Applicable Construction Code ( Velve 1 section 111 19 77 Edition, $77 Addende, Code Cases None (b) Applicable Edition of Section XI Utilf red for Repairs or Replacements 1980 W81 Ad$ende, code Cases N308 6.

Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repelred Staaped Name of Name of Manufacturer Board Other Year Replaced (Yes or Component Marufacturer Serial No.

No.

Identification Bullt or Replacement No)

Valve Dresser TE-34464 NA 1E12F036 1983 Replacement Yes V

7.

Description of Work Instatt modif teetion to volve flance per FCN 28822.

j 8.

Tests conducted.

Nydrostatic I 1 Pneunette ( )

Pressure psi Test Temp.

'F Nominal Operating Pressure ( )

Exenpt [ ] Other (X1 None 9.

Remarks None U

CERTIFICATE OF COMPLIANCE j

We certify that the statements made in this report are correct and this rer>lacement conforms t e

es of t pASME Code,Section XI.

(repair or replacement)

Signed r ?

N' fmM Yl

, 19 5 MA Date Ohr/or/dwnerDsfgnee, Tith CERTIFICATE OF INSERVICE INSPECTION I, the tndersigned, holding a valid comission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Ittinois and errptoyed by FMEA* (Arkwelcht Mutual Insurance) of Massachusetts have inspected the components described in this owner's Report during the period 01/09/95 to 04/28/95, and state that to the best of ary knowledge and belief, the owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his enptoyer sakes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthermore, neither the Inspect 6r nor his employer shall be liable in any manner for any personal injury or property damage or a toss of any kind arising from or connected with this inspection. * (Fr.ctory Mutual Engineering Association)

Mk Comisstons TAL /276 Inspector's Signature National Board, State, Province Date bI 193 7 J

s O

&..a

.a*a ILLINCIS POWER COMPANY FORM NIS 2 OWNER'S REPORT FOR REPAIRS OR REPLACEE NTS As Required by the Provisions of the ASME Code Section XI f

G 1.

Owner Ittinois Power Coneany Data Report No. RF 5-56 Name Sox 678. Cifnton. IL 61727 Date April 28, 1995 Address sheet 1 of 1 2.

Plant Clinton Power Stati m Unit 1

.N" Box 678. Clinton. IL 61727 MWR-D57854 Address Repair Organization P.O. No, Job No.

3.

Work Performed by Ittinois Power Co.

Type Code Synbot Stanp N/A Box 678. Clinton, Ittinois 61727 Authorization No.

N/A Address Expiration Date N/A 4.

Identification of System Feedwater (NFWO1)

Code Class 2 5.

(a) 1) Applicable Construction Code ( Valve

)

Section III 19 74 Edition, $75 Addenda, Code Cases NA (b) Applicable Edition of Section XI Utilized for Repairs or Replacements 1980 W81 Addenda, Code Cases N308 i

6.

Identification of Components Repaired or Replaced and Replacement Components ASME Code National Repaired Stamped Name of Name of Manufacturer Board Other Year Replaced (Yes or Conponent Manufacturer Serial No.

No.

Identification Bullt or Replacement No) 1

]

(p Valve Anchor / Darling E 6214 158 1 NA 1821F0658 1979 Repaired Yes b

i l

1 7.

Description of Work Weld repair steam cuts in body casket seatino aree. Machined bore to 18.78" per FCW 28721.

8.

Tests Condxted:

Hydrostatic ! )

Pneumatic ( )

Pressure est Test Tenp.

• F Nominal Operating Pressure [X3 Exempt [ ] Other ( )

9.

Remarks PT of machined surface.

l )

v

CERTIFICATE OF COMPLIANCE We certify that the statements made in this report are correct and this repair conforms.

'he es of e ASME Code,Section XI.

(repair or replacement)

Signed llc

/hvo>pA Date

/

i

,19 k kr f\\ owner's DeDonee, Tide

/ /

CERTIFICATE OF INSERVICE INSPECTION 1, the urdersigned, holding a valid comission issued by the National Board of Boller and Pressure Vessel Inspectors and the State or Province of Ittinois and enployed by FMEA* (Arkwelcht Mutuel Insurance) of Massachusetts have inspected the components described in this owner's Report dJring the period 02/03/95 to 0?./28/95, and state that to the best of my knowledge and belief, the owner has performed examinations and taken corrective measures described in this Owner's Report in accordance with the requirements of the ASME Code,Section XI.

By signing this certificate neither the Inspector nor his employer makes any warranty, expressed or implied, concerning the examinations and corrective measures described in this owner's Report. Furthernere, neither the Inspector nor his ecptoyer shall be liable in any manner for any personal injury or property damage or a loss of any kind arising from or connected with this inspection. * (Factory Mutual Engineering Association)

I s

hM kl. 1d Comissions TLt. /29G Inspector's Signature National Board, State, Province Date N4 19 E

-)