ML030770832: Difference between revisions

From kanterella
Jump to navigation Jump to search
(Created page by program invented by StriderTol)
(Created page by program invented by StriderTol)
Line 3: Line 3:
| issue date = 03/18/2003
| issue date = 03/18/2003
| title = Review of TSTF-445 Revision 1
| title = Review of TSTF-445 Revision 1
| author name = Beckner W D
| author name = Beckner W
| author affiliation = NRC/NRR/DRIP/RORP
| author affiliation = NRC/NRR/DRIP/RORP
| addressee name = Pietrangelo A R
| addressee name = Pietrangelo A
| addressee affiliation = Nuclear Energy Institute (NEI)
| addressee affiliation = Nuclear Energy Institute (NEI)
| docket =  
| docket =  

Revision as of 05:55, 14 July 2019

Review of TSTF-445 Revision 1
ML030770832
Person / Time
Issue date: 03/18/2003
From: Beckner W
NRC/NRR/DRIP/RORP
To: Pietrangelo A
Nuclear Energy Institute
Kavanagh, k. NRR, 415-3743
References
Download: ML030770832 (4)


Text

March 18, 2003Mr. Anthony PietrangeloNuclear Energy Institute 1776 I Street, N. W.

Suite 400 Washington, DC 20006-3708

Dear Mr. Pietrangelo:

The Nuclear Regulatory Commission (NRC) has completed its review of the Nuclear EnergyInstitute Technical Specification Change Traveler, TSTF-445 Revision 1, "Revision to Peak Linear Heat Rate Safety Limit" proposed changes to NUREG-1432, Rev. 2, "Standard Technical Specifications Combustion Engineering Plants."TSTF-445 Revision 1 proposes to replace Technical Specification (TS) Safety Limit 2.1.1.2,"Peak Linear Heat Rate" with a "Peak Fuel Centerline Temperature" Safety Limit. This change is necessary such that the Safety Limit adequately conforms to 10 CFR 50.36(c)(1)(ii)(A) which requires that Limiting Safety System Settings prevent a Safety Limit from being exceeded during normal operations and Anticipated Operational Occurrences. This proposed change is consistent with the Westinghouse and B&W improved Standard Technical Specifications. The staff finds the proposed changes acceptable and applicable to both analog and digital plants.

The staff issued its safety evaluation approving TSTF-445 for plant-specific license amendment requests and for incorporation into NUREG-1432, Rev. 2, "Standard Technical Specifications Combustion Engineering Plants" by letter dated December 23, 2002. TSTF-445 Revision 1 provides a minor editorial change to the wording of the Safety Limit which does not result in a change to the staff's safety evaluation. As a matter of efficiency, the staff has chosen not to process TSTF-445 Revision 1 through the Consolidated Line Item Improvement Process (CLIIP) since there are relatively few licensees remaining that have not adopted this change.Please contact me at (301) 415-1161 or e-mail wdb@nrc.gov if you have any questions or needfurther information on these proposed changes.Sincerely,/RA/William D. Beckner, Program Director Operating Reactor Improvements Program Division of Regulatory Improvement Programs Office of Nuclear Reactor Regulationcc:T. Silko, BWROGD. Bice, CEOG P. Infanger, BWOG S. Wideman, WOG D. Hoffman, EXCEL B. Mann, EXCEL

ML030770832DOCUMENT NAME: G:\RORP\TSS\KAVANAGH\TSTF-445 R1 dispositionOFFICETSS:RORP:DRIPTSS:RORP:DRIPBC:PDIV:DLPMSC:TSS:DRIPPD:RORP:DRIPNAMEKAKavanaghLAHillHBerkowRLDennigWDBecknerDATE03/13/200303/13/200303/13/200303/14/200303/18/2003