Latest revision as of 07:59, 2 January 2025

Text

Revised Final Status Survey (FSS) Report - Phase 2, Release Record - Unit 2 Tendon Buttress Pits Survey Unit 06108
	ML19295G843
Person / Time
Site:	Zion File:ZionSolutions icon.png
Issue date:	09/01/2019
From:	; ZionSolutions
To:	; Office of Nuclear Material Safety and Safeguards
Shared Package
ML19295G627	List: ML19295G587; ML19295G611; ML19295G612; ML19295G617; ML19295G621; ML19295G625; ML19295G670; ML19295G674; ML19295G699; ML19295G702; ML19295G705; ML19295G726; ML19295G728; ML19295G734; ML19295G738; ML19295G742; ML19295G747; ML19295G751; ML19295G758; ML19295G764; ML19295G768; ML19295G788; ML19295G791; ML19295G795; ML19295G816; ML19295G818; ML19295G820; ML19295G822; ML19295G826; ML19295G828; ML19295G831; ML19295G837; ML19295G841; ML19295G843; ML19295G846; ML19295G850; ML19295G853; ML19295G855; ML19295G857; ML19295G859; ML19295G863; ML19295G866; ML19295G870; ZS-2019-0090, Revised Final Status Survey (FSS) Report - Phase 2, Release Record - Waste Water Treatment Facility Survey Unit 09100;
References
	ZS-2019-0090
	Download: ML19295G843 (65)
	v • d • e

ZION STATION RESTORATION PROJECT FINAL STATUS SURVEY RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

~

= ZIONSOLUTIONSLLC-An EnergySolutions Company

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[2]

PREPARED BY / DATE: Patricia Giza 9/1/2019 Radiological Engineer REVIEWED BY / DATE: R.F. Decker 9/1/2019 Radiological Engineer APPROVED BY / DATE: D.Wojtkowiak 9/1/2019 C/LT Manager

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[3]

TABLE OF CONTENTS

1.

EXECUTIVE

SUMMARY

.................................................................................................... 5

2.

SURVEY UNIT DESCRIPTION.......................................................................................... 6

3.

CLASSIFICATION BASIS................................................................................................... 6

4.

DATA QUALITY OBJECTIVES (DQO)............................................................................ 6

5.

SURVEY DESIGN............................................................................................................... 10

6.

SURVEY IMPLEMENTATION........................................................................................ 13

7.

SURVEY RESULTS............................................................................................................ 14

8.

QUALITY CONTROL........................................................................................................ 15

9.

INVESTIGATIONS AND RESULTS................................................................................ 16

10. REMEDIATION AND RESULTS...................................................................................... 16

11. CHANGES FROM THE SURVEY PLAN........................................................................ 16

12. DATA QUALITY ASSESSMENT (DQA)......................................................................... 16

13. ANOMALIES....................................................................................................................... 16

14. CONCLUSION..................................................................................................................... 16

15. REFERENCES..................................................................................................................... 17

16. ATTACHMENTS................................................................................................................. 18 ATTACHMENT 1 - FIGURE AND MAPS........................................................................ 19 ATTACHMENT 2 - QC DATA........................................................................................... 22 ATTACHMENT 3 - ISOCS ANALYTICAL REPORTS.................................................. 24 LIST OF TABLES Table 1 - Dose Significant Radionuclides and Mixture................................................................... 8 Table 2 - Base Case and Operational DCGLs................................................................................. 9 Table 3 - Surrogate Ratios............................................................................................................. 11 Table 4 - Investigation Levels....................................................................................................... 12 Table 5 - Synopsis of Survey Design............................................................................................ 13 Table 6 - Unit 2 Tendon Buttress Pits - Measured Concentrations of ROC for FSS.................... 15 Table 7 - Unit 2 Tendon Buttress Pits - Judgmental Measurement Population............................ 15

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[4]

LIST OF ACRONYMS AND ABBREVIATIONS ALARA As Low As Reasonably Achievable BcDCGL Base Case Derived Concentration Guideline Level BFM Basement Fill Model DQA Data Quality Assessment DQO Data Quality Objective DCGL Derived Concentration Guideline Level FSS Final Status Survey GW Groundwater HTD Hard-to-Detect IC Insignificant Contributor ISOCS In Situ Object Counting System LTP License Termination Plan MARSSIM Multi-Agency Radiation Survey and Site Investigation Manual OpDCGL Operational Derived Concentration Guideline Level QAPP Quality Assurance Project Plan QC Quality Control ROC Radionuclides of Concern SOF Sum of Fractions UCL Upper Confidence Level ZNPS Zion Nuclear Power Station ZSRP Zion Station Restoration Project

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[5]

1.

EXECUTIVE

SUMMARY

This Final Status Survey (FSS) Release Record for survey unit 06108, Unit 2 Tendon Buttress Pits has been generated for the Zion Station Restoration Project (ZSRP) in accordance with ZionSolutions procedure ZS-LT-300-001-005, Final Status Survey Data Reporting (Reference 1) and satisfies the requirements of Section 5.11 of the Zion Station Restoration Project License Termination Plan (LTP) (Reference 2).

The FSS Sample Plan B3-06108AF was developed in accordance with ZionSolutions procedure ZS-LT-300-001-001, Final Status Survey Package Development (Reference 3) the ZSRP LTP, and guidance from NUREG-1575, Multi-Agency Radiation Survey and Site Investigation Manual (MARSSIM) (Reference 4).

In April of 2016, an FSS was conducted on the Turbine Building basement structure. The sample plan design for the FSS of the Turbine Building did not include the surface area of the Unit 1 and Unit 2 Tendon Buttress Pits. A separate sample plan was written to include six (6) additional judgmental measurements to represent the surface area of each of the Tendon Buttress Pits. The result of each In Situ Object Counting System (ISOCS) measurement will be added as per the LTP Chapter 5, section 5.5.6.1.

Final Status Survey was performed in the Unit 2 Tendon Buttress Pits to demonstrate that the concentrations of residual radioactivity were equal to or below site-specific Derived Concentration Guideline Levels (DCGL) corresponding to the dose criterion in 10 CFR 20.1402. The Unit 2 Tendon Buttress Pits have a MARSSIM Classification of 3.

A sample plan was designed based upon the use of the Sign Test as the nonparametric statistical test for compliance. Both the Type I () and Type II () decision rates were set at 0.05. The Canberra ISOCS was selected as the primary instrument used to perform FSS. The Tendon Buttress Pits were surveyed as biased areas using judgmental locations. The results of the judgmental measurements were added to the systematic mean of the Turbine Building basement survey. Six (6) judgmental ISOCS measurements with a Field of View (FOV) of 28 m2 were originally designed for each Buttress Pit floors with the possibility of one (1) additional measurement taken on the wall if accessible. After the engineer walk down and visual inspection, it was decided to revise the original Circular Plane geometry to the Room geometry, which decreased the FOV from 28 m2 to 18.7 m2. See ZionSolutions TSD 14-022 Use of In-Situ Gamma Spectroscopy for Final Status Survey of End State Structures (Reference 5). Based on the new FOV of 18.70 m2 for each judgmental ISOCS measurement, the total surface area coverage for the measurements equated to 112 m2 or approximately 7% of the total surface area of the Unit 2 Tendon Buttress Pits.

The results from each judgmental ISOCS measurement taken in the Unit 2 Tendon Buttress Pits indicate a Sum of Fractions (SOF), considering the concentration of all

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[6]

applicable Radionuclides of Concern (ROC), either by direct measurement or by inference, is less than 0.1 when applying the respective Operational Derived Concentration Guideline Levels (OpDCGL) for the Turbine Building Basement from ZionSolutions TSD 17-004, Operational Derived Concentration Guideline Levels for Final Status Survey (Reference 6). Therefore, the null hypothesis is rejected and the Unit 2 Tendon Buttress Pit survey unit is acceptable for unrestricted release.

2.

SURVEY UNIT DESCRIPTION The Tendon Buttress Pits are bound by the interior surface of the structure from 591 foot elevation down to the 565 foot elevation. The survey unit consists of the Containment concrete exterior and buttress, tendon steel end caps protruding from the buttress faces, perimeter walls and the wall dividing the Tendon Buttress Pits into chambers. The Tendon Buttress Pits are 26 feet deep and 4 feet wide with angled side walls which limits access. There are six entrances (see Attachment 1). In the end-state condition, the portions of the structures above the 588 foot elevation will be removed and disposed of as waste. The remaining void below the 588 foot elevation will be backfilled with a combination of clean demolition debris and clean fill.

3.

CLASSIFICATION BASIS The Turbine Building basement survey unit 06100 was classified in accordance with ZionSolutions procedure ZS-LT-300-001-002, Survey Unit Classification (Reference 7). The Tendon Buttress Pits were not included in the original sample plan B3-06100AS, but are part of the Turbine Building survey unit.

Based on information from the Zion Station Historical Site Assessment (HSA)

(Reference 8), the initial classification for Turbine Building basement 06100 survey unit was Class 3. Although the Unit 2 Tendon Buttress Pits were inaccessible during site characterization in 2013, the results of environmental monitoring of radiological effluents indicate that the residual radioactivity in the Tendon Buttress Pits was minimal, supporting the classification.

4.

DATA QUALITY OBJECTIVES (DQO)

Final Status Survey planning and design hinges on coherence with the Data Quality Objective (DQO) process to ensure, through compliance with explicitly defined inputs and boundaries, that the primary objective of the survey is satisfied. The DQO process is described in the ZSRP LTP. The appropriate design for a given survey will be developed using the DQO process as outlined in Appendix D of MARSSIM.

The DQO process incorporated hypothesis testing and probabilistic sampling distributions to control decision errors during data analysis. Hypothesis testing is a

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[7]

process based on the scientific method that compares a baseline condition to an alternate condition. The baseline condition is technically known as the null hypothesis.

Hypothesis testing rests on the premise that the null hypothesis is true and that sufficient evidence must be provided for rejection. In designing the survey plan, the underlying assumption, or null hypothesis was that residual activity in the survey unit exceeded the release criteria. Rejection of the null hypothesis would indicate that residual activity within the survey unit does not exceed the release criteria. Therefore, the survey unit would satisfy the primary objective of the FSS sample plan.

The primary objective of the FSS sample plan is to demonstrate that the level of residual radioactivity in survey unit 06108 did not exceed the release criteria specified in the LTP and that the potential dose from residual radioactivity is As Low As Reasonably Achievable (ALARA).

ZionSolutions TSD 11-001, Technical Support Document for Potential Radionuclides of Concern During the Decommissioning of the Zion Station (Reference 9) established the basis for an initial suite of potential ROC for the decommissioning of the Zion Nuclear Power Station (ZNPS). LTP Chapter 2 provides detailed characterization data that described contamination levels in the basements. The survey data for this basement is based on core samples obtained at biased locations with elevated contact dose rates and/or evidence of leaks/spills and analyzed for the presence of plant-derived radionuclides.

ZionSolutions TSD 14-019, Radionuclides of Concern for Soil and Basement Fill Model Source Terms (Reference 10) evaluates the results of the concrete core analysis data from the Containments and Auxiliary Building and refines the initial suite of radionuclides potential ROC by evaluating the dose significance of each radionuclide.

LTP Chapter 6, section 6.5.2 discusses the process used to derive the ROC for the decommissioning of ZNPS, including the elimination of insignificant dose contributors (IC) from the initial suite. LTP section 6.5.2 also states that the Auxiliary Building basement ROC and the IC percentage of 5% for adjusting ROC DCGLs will also be applied to all other basements with the exception of the Containments. This includes the Turbine Building basement survey unit. Table 1 presents the ROC from the Auxiliary Building basement structural surfaces and the normalized fractions based on the radionuclide mixture.

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[8]

Table 1 - Dose Significant Radionuclides and Mixture Radionuclide

% of Total Activity (normalized)(1)

Co-60 0.92%

Cs-134 0.01%

Cs-137 75.32%

Ni-63 23.71%

Sr-90 0.05%

(1) Based on maximum percent of total activity from Table 20 of TSD 14-019, normalized to one for the dose significant radionuclides.

A fundamental precursor to survey design is to establish a relationship between the release criteria and some measurable quantity. This is done through the development of DCGLs. The DCGLs represent average levels of radioactivity above background levels and are presented in terms of surface or mass activity concentrations. Chapter 6 of the LTP describes in detail the modeling used to develop the DCGLs for structures.

The End State basements will be comprised of steel and/or concrete structures which will be covered by at least three feet of clean soil and physically altered to a condition which would not realistically allow the remaining structures, if excavated, to be occupied. The exposure pathways in the Basement Fill Model (BFM) are associated with residual radioactivity in floors and walls that is released through leaching into water contained in the interstitial spaces of the fill material. The BFM assumes that the inventory of residual radioactivity in a given building is released either instantly or over time by diffusion, depending on whether the activity is surficial or volumetric, respectively. The activity released into the fill water will adsorb onto the clean fill, as a function of the radionuclide-specific distribution coefficients, resulting in equilibrium concentrations between the fill and the water. Consequently, the only potential exposure pathways after backfill, assuming the as-left geometry, are associated with the residual radioactivity in the water contained in the fill.

The final outputs of the BFM are the basement DCGLs, which are calculated using the BFM Groundwater (GW) and BFM Drilling Spoils Dose Factors (LTP Chapter 6, Tables 6-24 and 6-25). The DCGLs for basement structure surfaces are calculated separately for the GW and Drilling Spoils scenarios and for the summation of both scenarios. The summation DCGL is designated as the Base Case DCGL (BcDCGL) and is used during FSS to demonstrate compliance (analogous to the DCGLW as defined in MARSSIM).

The BcDCGLs are radionuclide-specific concentrations that represent the 10 CFR 20.1402 dose criterion of 25 mrem/year and are calculated for each ROC and each backfilled basement.

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[9]

When applied to structures, the DCGLs are expressed in units of activity per unit of area (pCi/m2). The unity rule is applied when there is more than one ROC. The measurement results for each singular ROC present in the mixture are compared against their respective DCGL to derive a dose fraction.

The BcDCGLs for the unrestricted release of the Turbine Building survey unit (including the Tendon Buttress Pits) are provided in Table 2. The IC dose percentage of 5% was used to adjust the Turbine Building BcDCGLs to account for the dose from the eliminated IC radionuclides.

Each radionuclide-specific BcDCGL is equivalent to the level of residual radioactivity (above background levels) that could, when considered independently, result in a TEDE of 25 mrem per year to an AMCG. To ensure that the summation of dose from each source term is 25 mrem/year or less after all FSS is completed, the BcDCGL is reduced based on an expected, or a priori, fraction of the 25 mrem/year dose limit from each source term. The reduced DCGLB (or OpDCGL) can be related to the BcDCGL as an expected fraction of dose based on an a priori assessment of what the expected dose should be based on the results of site characterization, process knowledge and the extent of planned remediation. The OpDCGL is then used as the DCGL for the FSS design of the survey unit (calculation of surrogate DCGLs, investigations levels, etc.). Details of the OpDCGLs derived for each dose component and the basis for the applied a priori dose fractions are provided in TSD 17-004. The OpDCGLB for FSS in the Unit 2 Tendon Buttress Pits are also provided in Table 2.

Table 2 - Base Case and Operational DCGLs Radionuclide Base Case Turbine Building DCGLs pCi/m2 Operational Turbine Building DCGLs pCi/m2 Co-60 7.03E+07 5.98E+06 Ni-63 2.18E+09 1.85E+08 Sr-90 7.74E+05 6.58E+04 Cs-134 1.59E+07 1.35E+06 Cs-137 2.11E+07 1.79E+06 Instrument DQOs included a verification of the ability of the survey instrument to detect the radiation(s) of interest relative to the OpDCGL. The Canberra ISOCS was selected as the primary instrument used to perform FSS of basement surfaces. Survey instrument response checks were required prior to issuance and after the instrument had been used.

Control and accountability of survey instruments was required to assure the quality and prevent the loss of data.

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[10]

As part of the DQOs applied to laboratory processes, analysis results were reported as actual calculated results. The actual recorded value was used as the recorded FSS result for measurement and/or sample values that are less than MDC. Negative values were recorded as zero. For radionuclides less than MDC, the value representing the highest abundance was selected. Results were not reported as less than MDC. Sample report summaries included unique sample identification, analytical method, radionuclide result uncertainty, laboratory data qualifiers, units, and the observed MDC.

In accordance with the LTP, for laboratory analysis, MDCs less than 10% of the OpDCGL were preferable while MDCs up to 50% of the OpDCGL were acceptable. The maximum acceptable MDC for measurements obtained using field instruments was 50%

of the applicable OpDCGL.

5.

SURVEY DESIGN The level of effort associated with planning a survey is based on the complexity of the survey and nature of the hazards. Guidance for preparing FSS plans is provided in procedure ZS-LT-300-001-001. The procedure states that the FSS of a Class 3 survey unit shall have between 1% and 10% areal scan coverage. Due to safety concerns identified by a walkdown of the Tendon Buttress Pits, an areal coverage of 5% was selected. The ISOCS Room geometry was selected in accordance with TSD 14-022 and the original FOV of 28 m2 was adjusted to a box FOV of 18.70 m2 for total surface scan area of approximately 112 m2.

Sample size determination for the FSS of the Turbine Building basement is addressed in LTP Chapter 5, section 5.5.2.2. The surface areas of the Tendon Buttress Pits were not included in the surface area that was surveyed as the Turbine Building basement.

Consequently, the source term from biased judgmental FSS results from the surfaces of the Tendon Buttress Pits will be added to the Turbine Building basement. This is addressed in LTP Chapter 5, Table 5-22. The FSS data taken in the Turbine Building basement passed Sign test. The mean dose contribution for the Turbine Building basement is then calculated using the mean concentrations from the FSS of the Turbine Building basement walls and floors plus the mean of the judgmental samples taken in other portions of the Turbine Building basement survey unit (e.g. the Circulating Water Intake Pipe, the Circulating Water Discharge Pipe and the Buttress Pits/Tendon Tunnels) on an area-weighted basis. The total basement area used in the weighted average calculation is the adjusted surface area used to calculate the DCGLs in LTP Chapter 6, section 6.6.8. The adjusted area for the Turbine Building basement from LTP Chapter 5, Table 5-23 is 27,135 m2. In accordance with TSD 14-014, End State Surface Areas, Volumes, and Source Terms of Ancillary Buildings, (Reference 11), the total surface area

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[11]

of one Tendon Buttress Pit is 2,863 ft2 or 266 m2. The total surface area of all six Unit 2 Tendon Buttress Pits is 1,596 m2.

The area-weighted SOF is calculated in accordance with LTP Chapter 5, Equation 5-8, which is reproduced as follows. The SOFBi,B variable in the equation is based on the mean of the judgmental samples.

Equation 1

,=,

=1 where:

SOFB,B

=

total surface SOF including all surface survey units in basement (B)

SASUi,B

=

surface area of survey unit (i) in basement (B)

SAAdjust,B

=

adjusted surface area for DCGL calculation (Table 5-23) for basement (B)

SOFBi,B

=

SOFB for survey unit (i) in basement (B)

This sample plan for the Unit 2 Tendon Buttress pits consisted of 6 judgmental locations, one on the floor of each Buttress Pit. Attachment 1, Figures and Maps, illustrates the locations of the ISOCS measurements taken.

The DQO process determined that Co-60, Ni-63, Sr-90, Cs-134, Cs-137 would be the ROC in survey unit 06108. During FSS, concentrations for Hard-to-Detect (HTD) ROC Ni-63 and Sr-90 are inferred using a surrogate approach specified in LTP section 5.2.11.

Cs-137 is the principle surrogate radionuclide for Sr-90 and Co-60 is the principle surrogate radionuclide for Ni-63. The mean, maximum and 95% Upper Confidence Level (UCL) of the surrogate ratios for concrete core samples taken in the Auxiliary Building basement were calculated in TSD 14-019 and are presented in LTP Chapter 5, Table 5-15, which is reproduced in Table 3 below.

Table 3 - Surrogate Ratios Ratios Auxiliary Building Mean Max 95%UCL Ni-63/Co-60 44.143 180.450 154.632 Sr-90/Cs-137 0.001 0.002 0.002 For the FSS of survey unit 06108, the surrogate OpDCGLs for Co-60 and Cs-137 are based on the maximum ratios from Table 3. The equation for calculating a surrogate DCGL is as follows:

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[12]

Equation 2

=

1

+

2 2+

3 3+

Where:

DCGLSur =

Surrogate radionuclide DCGL DCGL2,3n = DCGL for radionuclides to be represented by the surrogate Rn

Ratio of concentration (or nuclide mixture fraction) of radionuclide n to surrogate radionuclide Using the OpDCGLs for the Turbine Building basement presented in Table 2 and the maximum ratios from Table 3, the following surrogate calculations were performed for FSS unit 06108; Equation 3 (137)

1

1 1.79+ 06(137)+

0.002 6.58+ 04(90)

= 1.70+ 06 /2 The surrogate OpDCGL that was used for Cs-137 in FSS unit 06108 for direct comparison of measurement results to demonstrate compliance is 1.70E+06 pCi/m2.

Equation 4 (60) =

1

1 5.98+ 06(60)+

180.45 1.85+ 08(63)

= 8.75+ 05 /2 The surrogate OpDCGL that was used for Co-60 in FSS unit 06108 for direct comparison of measurement results to demonstrate compliance is 8.75E+05 pCi/m2.

For this Class 3 basement structure survey units the Investigation Levels for ISOCS measurement results are those levels specified in LTP Chapter 5, Table 5-25 and are reproduced below in Table 4.

Table 4 - Investigation Levels Classification Direct Investigation Levels Class 3

>0.5 Operational DCGL In compliance with ZS-LT-01, Quality Assurance Project Plan (for Characterization and FSS) (QAPP) (Reference 12), replicate measurements were performed on 5% of the static measurement locations.

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[13]

Table 5 provides a synopsis of the survey design for survey unit 06108.

Table 5 - Synopsis of Survey Design Feature Design Criteria Basis Survey Unit Surface Area 1,596 m2 TSD-14-014, Table 63 Number of Static Measurements 6 judgmental measurements w/ FOV of 18.70 m2 for 7% areal coverage ZS-LT-300-001-001, Measurement Spacing 1 measurement on the floor of each buttress pit ZS-LT-300-001-001, DCGLs

Co 5.98E+06 pCi/m2

Cs-134 - 1.35E+06 pCi/m2

Cs-137 - 1.79E+06 pCi/m2

Ni 1.85E+08 pCi/m2

Sr 6.58E+04 pCi/m2 Operational DCGLs for Turbine Building (LTP Chapter 5, Table 5-4)

Measurement Investigation Level

>0.5 Operational DCGLW (LTP Chapter 5, Table 5-25)

Survey Area Coverage 112 m2 for ~7% surface coverage ZS-LT-300-001-001, Quality Control (QC) 5% Duplicate ISOCS Measurements (LTP Chapter 5, section 5.9)

6.

SURVEY IMPLEMENTATION A walk down was performed by FSS personnel on June 11, 2018. Access into the Tendon Buttress Pits was via a set of ladders. The surfaces were very slippery due to the presence of water and tendon grease. Due to safety concerns pertaining to safe personnel access, no turnover surveys were performed prior to accepting the Unit 2 Tendon Buttress Pits for FSS.

Field Logs (ZS-LT-300-001-001 Attachment 14) were used to document field activities and other information pertaining to the performance of the FSS. Daily briefings were conducted to discuss the expectations for job performance and to review safety aspects of the job.

ZionSolutions TSD 14-022 provides the initial justification for the selection of reasonably conservative geometries for efficiency calibrations for the ISOCS based on the physical conditions and distribution of activity. All ISOCS measurements were acquired using approved geometries.

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[14]

The ISOCS detector was positioned vertical to the floor surface at the center-point of each selected measurement location. The Room geometry utilizes a 180 degree FOV (collimator removed) and the measurement location is at the top center of the room.

This orientation corresponded to a nominal FOV of 18.70 m2.

The measured activity for each gamma-emitting ROC (and any other gamma-emitting radionuclide that was positively detected by ISOCS) was recorded (in units of pCi/m2).

Background was not subtracted from any measurement. A SOF calculation was performed for each measurement by dividing the reported concentration of each ROC by the OpDCGL for each ROC to derive an individual ROC fraction (OpSOF). The individual OpSOF were then summed to provide a total OpSOF value for the measurement.

For the 6 judgmental measurements taken in survey unit 06108, compliance with the unrestricted release criteria was demonstrated by direct comparison of the ISOCS measurement results to their respective OpDCGL.

One (1) duplicate measurement was taken with the ISOCS in the second Tendon Buttress Pit (designated as Grid #2). This location was randomly selected using the Microsoft Excel RANDBETWEEN function. The number of replicate measurements satisfies the requirement that a minimum of 5% percent of the number of measurements that will be used for non-parametric statistical testing be selected for additional QC evaluation.

7.

SURVEY RESULTS The SOF or unity rule was applied to the data used for the survey planning, data evaluation and statistical tests for basement surfaces since multiple radionuclide-specific measurements were performed and concentrations inferred based on known relationships.

The application of the unity rule served to normalize the data to allow for an accurate comparison of the results from the 6 judgmental measurements to the release criteria.

When the unity rule was applied, the DCGLw (used for the nonparametric statistical test) becomes one. The BcDCGLB are directly analogous to the DCGLW as defined in MARSSIM. The use and application of the unity rule was performed in accordance with section 4.3.3 of MARSSIM.

As previously stated, as the extent of this survey was the acquisition of judgmental measurements at biased locations, compliance was demonstrated by direct comparison of each measurement result to the release criterion. For building surfaces, areas of elevated activity were defined as any area identified by measurement (systematic or judgmental) that exceeded the OpDCGL but was less than the BcDCGL. Any area that exceeded the BcDCGL would have required remediation. This was not the case for the FSS of the Unit 2 Tendon Buttress Pits as all measurements taken, when compared against the OpDCGL

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[15]

was less than an OpSOF of one. The ISOCS measured concentration results from the Unit 2 Tendon Buttress Pits are listed in Table 6. Table 7 presents the mean concentration of the judgmental measurements and BcSOF when compared against BcDCGL.

Table 6 - Unit 2 Tendon Buttress Pits - Measured Concentrations of ROC for FSS MEASUREMENT ID Co-60 Ni-63(1)

Sr-90(1)

Cs-134 Cs-137 OpSOF(2)

(pCi/m2)

B3-06108A-FJFC-001-GD 0.00E+00 0.00E+00 9.06E+00 3.88E+03 4.53E+03 0.006 B3-06108A-FJFC-002-GD 3.94E+03 7.11E+05 1.23E+01 0.00E+00 6.13E+03 0.008 B3-06108A-FJFC-003-GD 5.66E+03 1.02E+06 1.37E+01 1.05E+03 6.86E+03 0.011 B3-06108A-FJFC-004-GD 2.79E+03 5.03E+05 4.68E+00 2.39E+04 2.34E+03 0.022 B3-06108A-FJFC-005-GD 1.54E+03 2.78E+05 1.38E+01 3.25E+03 6.90E+03 0.008 B3-06108A-FJFC-006-GD 9.14E+02 1.65E+05 1.03E+01 6.10E+00 5.13E+03 0.004 (1) Inferred concentration Table 7 - Unit 2 Tendon Buttress Pits - Judgmental Measurement Population INDIVIDUAL MEASUREMENT METRICS Total Number of Judgmental Measurements =

6 Number of Quality Control Measurements =

1 Total Number of Measurements

=

7 Mean Judgmental OpSOF

= 0.010 Max Individual Judgmental Measurement OpSOF = 0.022 Number of Judgmental Measurements with OpSOF >1

=

0 STATISTICAL QUANTITIES ROC Mean Median Max Min Standard Deviation BcDCGL AVG BcSOF PER ROC AVG DOSE PER ROC (pCi/m2)

(pCi/m2)

Co-60 2.47E+03 2.17E+03 5.66E+03 0.00E+00 2.09E+03 7.03E+07 0.000 0.001 Ni-63 4.46E+05 3.91E+05 1.02E+06 0.00E+00 3.77E+05 2.18E+09 0.000 0.005 Sr-90 1.06E+01 1.13E+01 1.38E+01 0.00E+00 3.47E+00 7.74E+05 0.000 0.000 Cs-134 5.35E+03 2.15E+03 2.39E+04 0.00E+00 9.23E+03 1.59E+07 0.000 0.008 Cs-137 5.32E+03 5.63E+03 6.90E+03 2.34E+03 1.74E+03 2.11E+07 0.000 0.006 Mean BcSOF for Survey Unit

=0.001 Dose (based on Mean BcSOF)

= 0.021 mrem/yr

8.

QUALITY CONTROL (QC)

The implementation of required QC measures included the collection of one additional ISOCS measurements in survey unit 06108 for replicate measurement analysis. The

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[16]

ISOCS gamma spectroscopy reports for the replicate measurements are presented in. The replicate ISOCS measurement met the required acceptance criteria.

The completed Replicate Sample Assessment Form is included in Attachment 2 of this Release Record.

9.

INVESTIGATIONS AND RESULTS No measurements were taken for an investigation during the performance of FSS in this survey unit.

10.

REMEDIATION AND RESULTS No remediation was performed in this survey unit.

11.

CHANGES FROM THE SURVEY PLAN There were no addendums to the FSS plan.

12.

DATA QUALITY ASSESSMENT (DQA)

In accordance with procedure ZS-LT-300-001-004, the DQOs, sample design, and data were reviewed for completeness, accuracy, and consistency. Documentation was complete and legible. The FSS unit was properly classified as Class 3. All measurement results were individually reviewed and validated. The FOV for the number of measurements taken was sufficient to meet the requirement of 5% areal coverage of surfaces for a Class 3 survey unit. The instrumentation used to perform the FSS were in calibration, capable of detecting the activity with an adequate MDC and successfully response checked prior to and following use. An adequate number of replicate measurements were taken and the results meet the acceptance criteria as specified in the QAPP.

The analytical results of the 6 judgmental measurements were less than an OpSOF of one.

The preliminary data review consisted of calculating basic statistical quantities (e.g.,

mean, median, standard deviation). All data was considered valid and the values reported below the MDC, and values with uncertainties that exceeded two standard deviations.

13.

ANOMALIES No anomalies were observed during the performance or analyses of the survey.

14.

CONCLUSION Six (6) judgmental measurements were taken, one in each of the Unit 2 Tendon Buttress Pits. The FOV of each measurement included the floor and three walls. The total surface

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[17]

area of all of the six Unit 2 Tendon Buttress Pits is 1,596 m2. The FOV for the box Room geometry used for the ISOCS measurement was 18.70 m2, which equated to an areal coverage of 112 m2 or 7% of the surface area of the Buttress Pits. The requirements for a Class 3 survey unit have been met.

All of the measurements were below an OpSOF of 0.5. The average BcSOF for the survey unit was 0.001. The calculated dose from the mean ROC concentrations detected by these judgmental measurements is 0.021 mrem/yr.

The conclusion of this Release Record is that when the six judgmental measurement results from the Unit 2 Tendon Buttress Pits are added to the mean of the Turbine Building basement FSS results, the Turbine Building basement survey unit will pass FSS.

15.

REFERENCES

1.

ZionSolutions Procedure ZS-LT-300-001-005, Final Status Survey Data Reporting

2.

Zion Station Restoration Project License Termination Plan

3.

ZionSolutions Procedure ZS-LT-300-001-001, Final Status Survey Package Development

4.

NUREG-1575, Multi-Agency Radiation Survey and Site Investigation Manual

5.

ZionSolutions TSD 14-022, Use of In-Situ Gamma Spectroscopy for Final Status Survey of End State Structures

6.

ZionSolutions TSD 17-004, Operational Derived Concentration Guideline Levels for Final Status Survey

7.

ZionSolutions Procedure ZS-LT-300-001-002, Survey Unit Classification

8.

Zion Station Historical Site Assessment

9.

ZionSolutions TSD 11-001, Technical Support Document for Potential Radionuclides of Concern During the Decommissioning of the Zion Station

10.

ZionSolutions TSD 14-019, Radionuclides of Concern for Soil and Basement Fill Model Source Terms

11.

ZionSolutions TSD 14-014, End State Surface Areas, Volumes, and Source Terms of Ancillary Buildings

12.

ZionSolutions ZS-LT-01, Quality Assurance Project Plan (for Characterization and FSS)

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[18]

16.

ATTACHMENTS - Figure and Maps - QC Data - ISOCS Analytical Reports

[19]

ATTACHMENT 1 - FIGURE AND MAPS

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[20]

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[21]

[22]

ATTACHMENT 2 - QC DATA

FSS RELEASE RECORD UNIT 2 TENDON BUTTRESS PITS SURVEY UNIT 06108

[23]

UNIT 2 Tendon Buttress Pits-QC Agreement Replicate Measurement Assessment Survey Unit #

06000 Survey Unit Name Unit 2 Buttress Pits Sample Plan #

B3-06108A-F Sample

Description:

Comparison of systematic and QC ISOCS measurements of concrete floor at GRID #2. The standard measurement is ID as B3-06108A-FJFC-002-GD. The comparison measurement is ID as B3-06108A-FQFC-002-GD STANDARD COMPARISON Radionuclide Activity Value Standard Error Resolution Agreement Range Activity Value Standard Error Comparison Ratio Acceptable (Y/N)

(pCi/m2)

K-40 7.08E+05 1.00E+05 7

0.5-2.0 6.66E+05 9.96E+04 1.1 Y

Comments/Corrective Actions: There was acceptable agreement between the standard measurement and the replicate measurement. Based on the professional judgment of the Radiological Engineer, the same conclusion was reached for each measurement. No further action is necessary.

The acceptance criterion for replicate static measurements is as per the following Table.

[24]

ATTACHMENT 3 - ISOCS ANALYTICAL REPORTS

[25]

GAMM A S P E C T R U M A N A L Y S I S Filename: 5452A Report Generated On Sample Title Sample Description Sample Identification Sample Type Sample Geometry Peak Locate Threshold Peak Locate Range (in channels)

Peak Area Range (in channels)

Identification Energy Tolerance Sample Size Sample Taken On Acquisition Started Live Time Real Time Dead Time 6/14/2018 1 :18:18 PM B306108AFJFC001GD U-2 lA BUTTRESS PIT 001 GAMMA DIRECT 3.00 85 -

8192 85 -

8192 10.000 keV 1.870E+001 MA2 6/14/2018 6/14/2018 1 :08: 00 PM 1:08:16 PM 600.0 seconds 601. 4 seconds 0.23 %

Energy Calibration Used Done On Efficiency Calibration Used Done On Efficiency ID 3/15/2018 6/11/2018 BUTTRESS PIT A

[26]

Peak Analysis Report 6/14/2018 1:18:18 PM Page 2

P E A K ANALYSIS R E P O R T Detector Name:

5452A Sample

Title:

B306108AFJFC001GD Peak Analysis Performed on:

6/14/2018 1:18:18 PM Peak Analysis From Channel:

85 Peak Analysis To Channel:

8192 Peak ROI ROI Peak Energy FWHM Net Peak Net Area Continuum No. start end centroid (keV)

(keV)

Area Uncert.

Counts 1

295-316 300.16 75.04 0.96 2.05E+002 126.78 l.01E+003 2

332-344 339.34 84.84 0.36 7.79E+001 77.65 5.40E+002 3

947-961 953.57 238.39

1. 01

1. 29E+002 52.62 l.94E+002 4

1171-1189 1180.13 295.03 1.25 l.OOE+002

51. 28 l.63E+002 5

1396-1419 1406.54 351.64

1. 13 2.41E+002 53.55

1. 19E+O 02 6

2323-2339 2329.87 582.47

1. 69 7.58E+001 28.41 4.02E+001 7

2425-2443 2434.97 608.74 1.49 2.30E+002 38.28 4.04E+001 8

3635-3650 3641.18 910.29 1.13 6.0lE+OOl 22.72 2.29E+001 9

4470- 4486 4477.82 1119.46

1. 07 5.86E+001 22.10 2.04E+001 10 5828-5853 5839.84 1459.96

1. 91 4.10E+002 44.81 2.20E+001 11 7046-7063 7054.81 1763.70 0.88 7.04E+001 20.92 l.16E+001 M = First peak in a multiplet region m = Other peak in a multiplet region F = Fitted singlet Errors quoted at 2. 000 sigma

[27]

Interference Corrected Activity Report 6/14/2018 1 :18:18 PM Page 3

N U C L I D E I D E N T I F I C A T I O N R E P O R T Sample

Title:

B306108AFJFC001GD Nuclide Library Used: C:\\GENIE2K\\CAMFILES\\Zion Lib-BNL.NLB t **

IDENTIFIED NUCLIDES a

I

~

f a

I Nuclide Id Energy Yield Activity Activity Name Confidence (keV)

( % )

(pCi/MA2 )

Uncertainty K-40 0.999 1460.82*

10.66 7.54636E+005

1. 05343E+005 Eu-155 0.346 86.55*

30.70 1.12923E+004 1.14835E+004 105.31 21.10 Tl-208 0.999 583.19*

85.00 9.68561E+003 3.81079E+003 Pb-212 1.000 238.63*

43.60 1.76574E+004 7.76150E+003 Bi-214 0.999 609.32*

45.49 5.64298E+004 1.15991E+004 1120.29*

14.92 6.48057E+004 2.49677E+004 1764.49*

15.30 1.03196E+005 3.17473E+004 Pb-214

1. 000 295.22*

18.42 3.70026E+004

1. 98708E+004 351.93*

35.60 5.20075E+004

1. 39341E+004

~ Energy line found in the spectrum.

Energy line not used for Weighted Mean Activity Energy Tolerance :

10.000 keV Nuclide confidence index threshold=

0.30 Errors quoted at 2.000 sigma

[28]

Interference Corrected Activity Report 6/14/2018 1:18:18 PM Page 4

I N T E R F E R E N C E C O R R E C T E D R E P O R T Nuclide Name K-40 Eu-155 Tl-208 Pb-212 Bi-214 Pb-214 Nuclide Id Confidence 0.999 0.346 0.999 1.000 0.999 1.000 Wt mean Activity (pCi/M"'2 )

7.546356E+005

1. 129226E+004 9.685608E+003

1. 765742E+004 6.239606E+004 4.706133E+004 Wt mean Activity Uncertainty 1.053434E+005 l.148351E+004 3.81079DE+003 7.761497E+003 9.985485E+003 l.140866E+004

?

~ Nuclide is part of an undetermined solution X = Nuclide rejected by the interference analysis

@ = Nuclide contains energy lines not used in Weighted Mean Activity Errors quoted at 2.000 sigma

[29]

In.terference Corrected Activity Report U N I D E N T I F I E D Peak Locate Performed on:

Peak Locate From Channel:

Peak Locate To Channel:

6/14/2018 P E A K S 6/14/2018 85 8192 Peak CPS 1 : 18 :18 PM 1:18: 18 PM Peak No.

Energy (keV)

Peak Size in Counts per Second

% Uncertainty Peak Type 1

8 75.04 910.29 3.4147E-001 1.001 7E- 001 M = First peak in a multiplet region m = Other peak in a multiplet region F = Fitted singlet Errors quoted at

2. 000 sigma

61. 88 37.80 Sum Page 5

Tol.

Nuclide

[30]

nuclide MDA Report 6/14/2018 1 : 18 :18 PM Page 6

N U C L I D E MD A REPORT

+

Detector Name:

Sample Geometry:

Sample

Title:

5452A B306108AFJFC001GD Nuclide Library Used: C:\\GENIE2K\\CAMFILES\\Zion Lib-BNL.NLB Nuclide Name K-40 Co-60 Nb-94 Ag-108m Cs-134 Cs-137 Eu-152 Eu-154 Eu-155 Tl-208 Bi-212 Pb-212 Bi-214 Pb-214 Ra-226 Ac-228 Am-241 Energy (keV) 1460.82*

1173.23 1332.49 702.65 871.09 433.90 614. 3 0 722.90 604.72 795.86 661. 66 121. 78 344.28 1408. 01 123.07 723.30 1274.43 86.55*

105.31 583.19*

727.33 238.63*

609.32*

1120.29*

1764.49*

295.22*

351.93*

186. 21 338.32 911. 2 0 968.97 59.54 Yield

(%)

10.66 99.85 99.98 99.81 99.89 90.50 89.80 90.80 97.62 85.46 85.10 28.67 26.60

21. 07 40.40

20. 06 34.80 30.70

21. 10 85.00 6.67 43.60 45.49 14.92 15.30 18.42 35.60 3.64 11.27 25.80 15.80 35.90 Line MDA (pCi/MA2 )

6.307E+004 6.742E+003 5.987E+003 6.504E+003 5.905E+003 6.150E+003

1. 070E+004 7.220E+003 1.009E+004 7.439E+003 7.517E+003 2.676E+004 2.249E+004 3.141E+004

1. 881E+O 04 3.310E+004

1. 930E+004 1.843E+004 3.764E+004 5.062E+003 9.988E+004 1.108E+004

1. 012E+004 3.195E+004 3.406E+004 2.973E+004 l.607E+004 1.926E+005 5.429E+004 3.197E+004

4. 800E+004

1. 928E+004 Nuclide MDA (pCi/MA2 )

Activity (pCi/MA2 )

6.31E+004 7.546E+005 5.99E+003 -3.559E+003 5.91E+003 6.15E+003 7.44E+003 7.52E+003 2.25E+004 1.88E+004 1.84E+004 5.06E+003 9.99E+004 1.11E+004 l.01E+004 1.61E+004

1. 93E+005 3.20E+004 l.93E+004

-6.931E+002 3.294E+003 3.328E+003 7.022E+002

-7.19SE+003 2.083E+D03

-2.281E+002 3.881E+003 4.53DE+003 1.068E+004

-1.192E+004

-2.833E+004

-9.026E+OD3 2.340E+004

-1.883E+003 l.129E+004 2.664E+D03 9.686E+003 8.577E+004 l.766E+004 5.643E+004 6.481E+004 l.032E+005 3.700E+004 5.201E+004 2.786E+005

-1.673E+004 4.962E+004 2.828E+004 7.537E+003

+ ~ Nuclide identified during the nuclide identification

=Energy line found in the spectrum Calculated MDA is zero due to zero counts in the region, or Dec. Level (pCi/MA2 )

2.904E+004 3.141E+003 2.744E+003 3.086E+003 2.762E+OD3 2.942E+003 S.181E+003 3.423E+D03 4.892E+003 3.509E+003 3.571E+003 1.317E+004 1.086E+004 1.448E+004 9.253E+003 l.57DE+004 8.956E+003 9.018E+003

1. 854E+D04 2.358E+003 4.739E+004 5.356E+003 4.728E+003 1.448E+004 l.5DSE+004 l.437E+004 7.744E+003 9.438E+004 2.625E+004 1.523E+004 2.271E+004 9.466E+003 the region is outside the spectrum, or MDA has not been calculated Half-life too short to be able to perform the decay correction

[31]

GAMM A S P E C T R U M A N A L Y S I S Filename: 5452A Report Generated On Sample Title Sample Description Sample Identification Sample Type Sample Geometry Peak Locate Threshold Peak Locate Range (in channels)

Peak Area Range (in channels)

Identification Energy Tolerance Sample Size Sample Taken On Acquisition Started Live Time Real Time Dead Time 6/14/2018 9:12:04 AM B306108AFJFC002GD U-2 2A BUTTRESS PIT 002 GAMMA DIRECT 3.00 85 8192 85 -

8192 10.000 kev 1.870E+001 MA2 6/14/2018 6/14/2018 9:02: 00 AM 9:02:03 AM 600.0 seconds 601.1 seconds 0. 19 %

Energy Calibration Used Done On Efficiency Calibration Used Done On Efficiency ID 3/15/2018 6/11/2018 BUTTRESS PIT A

[32]

Peak Analysis Report 6/14/2018 9 ; 12: 04 AM Page 2

P E A K A N A L Y S I S R E P O R T Detector Name:

5452A Sample

Title:

B306108AFJFC002GD Peak Analysis Performed on:

6/14/2018 Peak Analysis From Channel:

Peak Analysis To Channel:

9: 12 :04 AM 85 8192 Peak ROI ROI No. start end Peak centroid Energy (keV)

FWHM Net Peak (keV)

Area Net Area Uncert.

1 284-306 2

329-344 3

740-750 4

946-959 5

1171-1187 6

1347-1359 7

1398-1415 8

1844-1855 9

2324-2339 10 2427-2444 11 3067-3078 12 3634-3651 13 3867-3880 14 4469-4487 15 5826-5852 16 7048-7065 300.94 339.59 745.15 953.70 1180.36 1352.07 1406.46 1849.05 2330.39 2434.88 3072.61 3641.99 3873.68 4478. 31 5840.25 7055.87 75.23 84.90 186.29 238.42 295.09 338.02 351. 62 462.26 582.60 608.72 768.15 910.50 968.42 1119.58 1460.06 1763.97 M = First peak in a multiplet region m ~ Other peak in a multiplet region F = Fitted singlet Errors quoted at 2. 000 sigma

1. 18 0.45

1. 02 0.92

1. 02 0.86 0.89 0.40 0.89

1. 41 0.46 1.24

1. 00 0.77 2.10

1. 31 2.26E+002 5.61E+001 2.90E+001 9.34E+001 9.lOE+OOl 3.46E+001 1.83E+002 1.55E+001 6.67E+001 2.00E+002 1.62E+001 9.25E+001 2.05E+001 7.80E+001 3.85E+002 5.74E+001 129.91 89.97 46.44 50.72 43.35 30.40 43.45 20.88 26.96 34.85 16.89 22.88 20.81 23.86 42.87 18.44 Continuum Counts 1.03E+003 6.51E+002 2.14E+002 2.00E+002 1.21E+002 7.44E+001 8.86E+001 3.55E+001 3.83E+001 3.24E+001 2.18E+001

1. 15E+001 3.0SE+OOl l.90E+001 1.70E+001 8.61E+OOO

[33]

Interference Corrected Activity Report 6/14/2018 9:12:05 AM Page 3

N U C L I D E I D E N T I F I C A T I O N R E P O R T Sample

Title:

B30610BAFJFC002GD Nuclide Library Used: C:\\GENIE2K\\CAMFILES\\Zion Lib-BNL.NLB I *******

IDENTIFIED NUCLIDES Nuclide Id Energy Yield Activity Activity Name Confidence (keV)

( % )

(pCi/M"2 )

Uncertainty K-40 0.999 1460.82*

10.66 7.08801E+005

1. 00086E+005 Eu-155 0.346 86.55*

30.70 8.12977E+003

1. 31471E+004 105.31 21.10 Tl-208 0.999 583.19*

85.00 8.52162E+003 3.59328E+003 Pb-212

1. 000 238.63*

43.60

l. 28072E+004 7.25891E+003 Bi-214 0.999 609.32*

45.49 4.90705E+004 l.04008E+004 1120.29*

14.92 8.62036E+004 2.72564E+004 1764.49*

15.30 8.40934E+004 2.78489E+004 Pb-214 1.000 295.22*

18. 42 3.36764E+004 l.69189E+004 351.93*

35.60 3.95739E+004 l.10906E+004 Ra-226

1. 000 186.21*

3.64 4.14957E+004 6.68422E+004 Ac-228 0.999 338.32*

11.27 2.29697E+004 2.04788E+004 911.20*

25.80 5.19102E+004 l.37861E+004 968.97*

15. 80 1.94908E+004

1. 98983E+004

~ Energy line found i n the spectrum.

@: Energy line not used for Weighted Mean Activity Energy Tolerance :

10.000 keV Nuclide confidence index threshold ~

0.30 Errors quoted at 2.000 sigma

[34]

Interference Corrected Activity Report 6/14/2018 9:12 : 05 AM Page 4

I N T E R F E R E N C E C O R R E C T E D R E P O R T Nuclide Name K-40 Eu-155 Tl-208 Pb-212 Bi-214 Pb-214 Ra-226 Ac-228 Nuclide Id Confidence 0.999 0.346 0.999 1.000 0.999

1. 000

1. 000 0.999 Wt mean Activity (pCi/MA2 )

7. 0 88014E+005

8. 129770E+003 8.521623E+003 1.280724E+004 5.707932E+004 3.780138E+004 4.149574E+004 3.707620E+004 Wt mean Activity Uncertainty 1.000863E+005 1.314712E+004 3.593284E+003 7.258914E+003 9.174833E+003 9.275396E+003 6.684218E+004 9.915259E+003

? = Nuclide is part of an undetermined solution X = Nuclide rejected by the interference analysis

@=Nuclide contains energy lines not used in Weighted Mean Activity Errors quoted at 2.000 sigma

[35]

Interference Corrected Activity Report Peak U N I D E N T I F I E D Peak Locate Performed on:

Peak Locate From Channel:

Peak Locate To Channel:

Energy Peak Size in 6/14/2018 P E A K S 6/14/2018 85 8192 Peak CPS 9:12:05 AM 9:12:04 AM No.

(keV)

Counts per Second

% Uncertainty Peak Type 1

75.23 3.763 8E-001 8

462.26 2.5899E-002 11 768.15 2.6985E-002 M

~ First peak in a multiplet region m

Other peak in a multiplet region F = Fitted singlet Errors quoted at 2. 000 sigma 57.53 134.39 104.29 Sum Page 5

Tol.

Nuclide

[36]

,Nuclide MDA Report 6/14/2018 9:12:05 AM Page 6

N U C L I D E MD A R E P O R T

+

Detector Name:

Sample Geometry:

Sample

Title:

Nuclide Library Used:

Nuclide Name K-40 Co-60 Nb-94 Ag-108m Cs-134 Cs-137 Eu-152 Eu-154 Eu-155 Tl-208 Bi-212 Pb-212 Bi-214 Pb-214 Ra-226 Ac-228 Am-241 Energy (keV) 1460.82*

1173.23 1332.49 702.65 871. 09 433.90 614.30 722.90 604.72 795.86 661.66 121. 78 344.28 1408.01 123.07 723.30 1274.43 86.55*

105.31 583.19*

727.33 238.63*

609.32*

1120.29*

1764.49*

295.22*

351.93*

186.21*

338.32*

911.20*

968.97*

59.54 5452A B306108AFJFC002GD C:\\GENIE2K\\CAMFILES\\Zion Lib-BNL.NLB Yield

( % )

10.66 99.85 99.98 99.81 99.89 90.50 89.80 90.80 97.62 85.46

85. 10 28.67 26.60 21.07 40.40 20.06 34.80 30.70 21.10

85. 00 6.67 43.60 45.49 14.92 15.30 18.42 35.60 3.64

11. 27 25.80 15.80 35.90 Line MDA (pCi/MA2

)

5.726E+004 6.590E+003 5.782E+003 5.799E+003 5.788E+003 6.220E+003 9.882E+003 6.557E+003 9.329E+003 7.587E+003 7.662E+003 2.518E+004 2.171E+004 3.292E+004 1.78SE+004 2.999E+004 l.832E+004 2.155E+004 3.541E+004 4.853E+003 8.683E+004 1.095E+004 8.912E+003 3.215E+004 2.931E+004 2.469E+004 l.264E+004 l.102E+005 3.238E+004

1. 294E+004 3.193E+004

1. 888E+004 Nuclide MDA (pCi/MA2 )

Activity (pCi/MA2 )

S.73E+004 5.78E+003 5.79E+003 6.22E+003 7.59E+003 7.66E+003 2.17E+004 l.79E+004 2.16E+004 4.85E+003 8.6BE+004 1.10E+004 8.91E+003

1. 26E+004 l.10E+005 1.29E+004 7.088E+005

-2.900E+003 3.949E+D03

-2.505E+003 3.70SE+003 6.83BE+003

-l.399E+003 2.875E+003

-6.27SE+003

-3.963E+003 6.135E+003 6.221E+003 4.154E+003 7.053E+003 1.738E+003 1.815E+004

-5.659E+003 8.130E+003 1.344E+004 8.522E+003

-5.053E+004

1. 281E+004 4.907E+004 8.620E+004 8.409E+004 3.368E+004 3.957E+004 4.150E+004 2.297E+004 5.191E+004 1.949E+004 1.89E+004 -5.091E+003

+

Nuclide identified during the nuclide identification

= Energy line found in the spectrum

>=Calculated MDA is zero due to zero counts in the region, or Dec. Level (pCi/MA2 )

2.614E+004 3.065E+003 2.642E+003 2.733E+003 2.703E+003 2.977E+003 4.771E+003 3.092E+003 4.SlOE+003 3.583E+003 3.643E+003 l.237E+004 1.047E+004

1. 523E+004 8.774E+003 1.415E+004 8.463E+003 l.058E+004 l.742E+004 2.254E+003 4.087E+004 5.291E+D03 4.124E+003 l.458E+004 1.267E+004 1.184E+004 6.029E+003 5.317E+004 1.529E+004 5.711E+003 l.468E+004 9.263E+003 the region is outside the spectrum, or MDA has not been calculated

@=Half-life too short to be able to perform the decay correction

[37]

GAMM A S P E C T R U M A N A L Y S I S Filename: C:\\GENIE2K\\CAMFILES\\00005024.CNF Report Generated On Sample Title Sample Description Sample Identification Sample Type Sample Geometry Peak Locate Threshold Peak Locate Range (in channels)

Peak Area Range (in channels)

Identification Energy Tolerance Sample Size Sample Taken On Acquisition Started Live Time Real Time Dead Time 6/12/2018 2:45:02 PM B306108AFJFC003GD

- - U-2 3B BUTTRESS PIT***

003 GAMMA DIRECT

3. 00 85 -

8192 85 -

8192 10.000 keV

1. 870E+001 M.... 2 6/12/2018 6/12/2018 1:02:00 PM 1:02:53 PM 600.0 seconds 600.7 seconds 0. 11 %

Energy Calibration Used Done On Efficiency Calibration Used Done On Efficiency ID 3/15/2018 6/12/2018 BUTTRESS PIT A

[38]

Peak Analysis Report 6/12/2018 2: 45: 02 PM Page 2

P E A K A N A L Y S I S REPORT Detector Name:

5456-A Sample

Title:

B306108AFJFC003GD Peak Analysis Performed on:

6/12/2018 2:45:02 PM Peak Analysis From Channel:

85 Peak Analysis To Channel:

8192 Peak ROI ROI Peak Energy No. start end centroid (keV) 1 2

3 4

5 6

7 8

9 10 11 12 13 14 15 16 17 18 19 126-285-740-946-1173-1397-2035-2325-140 307 752 960 1189 1415 2048 2339 2427-2445 2638-2652 3636-3650 3867-3881 4472-4487 4683-4697 4944-4957 5320- 5333 5503-5516 5830- 5853 7047-7065 130.84 301.05 744.48 954.67 1181.13 1407.12 2041.74 2331.78 2435.61 2644.96 3643.44 3873.57 4479.04 4690.33 4950.21 5326.94 5509.56 5841.43 7056.85 32.71 75.26 186.12 238.67 295.28 351.78 510.44 582.95 608.90 661.24 910.86 968.39 1119.76 1172.58 1237.55 1331.74 1377.39 1460.36 1764.21 M = First peak in a multiplet region m = Other peak in a multiplet region F = Fitted singlet Errors quoted at 2. 000 sigma FWHM Net Peak Net Area (keV)

Area Uncert.

1. 39 0.79 0.89 0.86 1.04

1. 00 0.74 0.98

1. 29 0.53 0.56 1.10 0.62 0.51 0.57 0.35 0.54 1.49 0.85 2.98E+002 2.00E+002 4.52E+001 1.09E+002 1.13E+002 1.54E+002 4.26E+001 6.84E+001 2.17E+002 4.96E+001 4.60E+001 3.74E+001 4.80E+001 3.48E+001 2.29E+001 3.04E+001 2.05E+001 3.74E+002 6.63E+001 69.30 134.05 52.37 50.49 45.40 46.73 24.34 27.51 39.48 20.24 23.18 17.80 24.59 16.38 15.78 12.82 10.98 41.45 18.15 Continuum Counts 2.74E+002 1.11E+003 2.42E+002 1.84E+002 l.27E+002 1.14E+002 3.84E+001 4.16E+001 5.15E+001

1. 84E+001 2.90E+001

1. 46E+001 3.30E+001 1.13E+001 1.41E+001 3.65E+OOO 3.50E+OOO

1. 43E+001 4.70E+OOO

[39]

Interference Corrected Activity Report 6/12/2018 2: 45: 02 PM Page 3

N U C L I D E I D E N T I F I C A T I O N R E P O R T Sample

Title:

B306108AFJFC003GD Nuclide Library Used: C:\\GENIE2K\\CAMFILES\\Zion Lib-BNL.NLB

- - - - ,I IDENTIFIED NUCLIDES Nuclide Id Energy Yield Activity Activity Name Confidence (keV)

(%)

(pCi/M... 2 )

Uncertainty K-40 1.000 1460.82*

10.66 6.79821E+005 9.57577E+004 Co-60 0.999 1173.23*

99.85 5.86164E+003 2.80329E+003 1332.49*

99.98 S.53031E+003 2.37754E+003 Cs-137 1.000 661.66*

85. 10 6.86943E+003 2.92256E+003 Tl-208 1.000 583.19*

85. 00 8.73950E+003 3.66844E+003 Pb-212 1.000 238.63*

43.60

1. 52189E+004 7.43950E+003 Bi-214 1.000 609.32*

45.49 5.31783E+004 1.1612SE+004 1120.29*

14.92 5.26553E+004 2.72977E+004 1764.49*

15.30 9.57431E+004 2.73110E+004 Pb-214

1. 000 295.22*

18.42

4. 23870E+004 l.82667E+004 351.93*

35.60 3.33735E+OD4 l.13210E+004 Ra-226 1.000 186.21*

3.64 6.57573E+D04 7.70389E+D04 Ac-228 0.562 338.32 11.27 911.20*

25.80 2.56539E+004 l.31696E+004 968.97*

15.80 3.54291E+004 1.71668E+004

- Energy line found i n the spectrum.

@ = Energy line not used for Weighted Mean Activity Energy Tolerance :

10.000 keV Nuclide confidence index threshold =

0.30 Errors quoted at

2. 000 sigma

[40]

Interference Corrected Activity Report 6/12/2018 2: 45: 02 PM Page 4

I N T E R F E R E N C E C O R R E C T E D R E P O R T Nuclide Name K-40 Co-60 Cs-137 Tl-208 Pb-212 Bi-214 Pb-214 Ra-226 Ac-228 Nuclide Id Confidence

1. 000 0.999

1. 000

1. 000 1.000 1.000 1.000

1. 000 0.562 Wt mean Activity (pCi/MA2) 6.798210E+005 5.668930E+003 6.869427E+003 8.739497E+003 1.521891E+004 5.875987E+004 3.587487E+004 6.575731E+004 2.927551E+004 Wt mean Activity Uncertainty 9.575766E+004 1.813218E+003 2.922559E+003 3.668440E+003 7.439496E+003 9.951233E+003 9.622777E+003 7.703889E+004 1.044902E+004

? ; Nuclide is part of an undetermined solution X ~ Nuclide rejected by the interference analysis

@ ~ Nuclide contains energy lines not used in Weighted Mean Activity Errors quoted at 2.000 sigma

[41]

Interference Corrected Activity Report U N I D E N T I F I E D Peak Locate Performed on:

Peak Locate From Channel:

Peak Locate To Channel:

Peak Energy Peak Size in 6/12/2018 P E A K S 6/12/2018 85 8192 Peak CPS 2:45:02 PM 2: 45 :02 PM No.

(keV)

Counts per Second

% Uncertainty Peak Type 1

32.71 4.9656E-001 2

75.26 3. 3273E-001 7

510.44 7.1060E-002 15 1237.55 3.8176E-002 17 1377.39 3.4167E-002 M ;;. First peak in a multiplet m== Other peak in a multiplet F== Fitted singlet Errors quoted at

2. 000 sigma region region 23.26 67.15 57.10 68.89 53.57 Sum Page 5

Tol.

Nuclide

[42]

Nuclide MDA Report 6/12/2018 2: 45: 02 PM Page 6

N U C L I D E MD A R E P O R T

+

Detector Name:

5456-A Sample Geometry:

Sample

Title:

B306108AFJFC003GD Nuclide Library Used: C:\\GENIE2K\\CAMFILES\\Zion Lib-BNL.NLB Nuclide Name K-40 Co-60 Nb-94 Ag-108m Cs-134 Cs-137 Eu-152 Eu-154 Eu-155 Tl-208 Bi-212 Pb-212 Bi-214 Pb-214 Ra-226 Ac-228 Am-241 Energy (keV) 1460.82*

1173.23*

1332.49*

702.65 871.09 433.90 614. 3 0 722.90 604.72 795.86 661.66*

121. 78 344.28 1408.01 123.07 723.30 1274.43 86.55 105.31 583.19*

727.33 238.63*

609.32*

1120.29*

1764.49*

295.22*

351.93*

186.21*

338.32 911.20*

968.97*

59.54 Yield

( % )

10.66 99.85 99.98 99.81 99.89 90.50 89.80 90.80 97.62 85.4 6 85.10 28.67 26.60

21. 07

40. 40 20.06 34.80 30.70 21.10 85.00 6.67 43.60 45.49 14.92 15.30 18.42 35.60 3.64

11. 27 25.80 15.80 35.90 Line MDA (pCi/MA2 )

4.961E+004 3.614E+003 2.458E+003 5.566E+003 6.176E+003 6.592E+003 1.080E+004 6.793E+003 l.022E+004 6.702E+003 3.687E+003 2.729E+004 2.270E+004 3.013E+004

1. 946E+O 04 3.076E+004

1. 896E+004 2.835E+004 3.979E+004 4.966E+003 8.652E+004 l.089E+004 l.129E+004 3.962E+004 2.295E+004 2.565E+004 1.476E+004 l.251E+005 5.598E+004 1.876E+004 2.270E+004 2.341E+004 Nuclide MDA (pCi/MA2 )

Activity (pCi/M... 2 )

4.96E+004 6.79BE+005 2.46E+OD3 5.862E+003 5.530E+003 5.57E+003 2.261E+002 l.337E+003 6.59E+003 -l.091E+003 3.532E+003 2.095E+003 6.70E+003 -7.40SE+002

1. 056E+003 3.69E+003 6.869E+003 2.27E+004 -3.173E+004

-4.459E+004 l.767E+D04 1.90E+004 -1.269E+003 l.035E+004 1.088E+003 2.84E+004 2.560E+004

-1.301E+OD4 4.97E+003 8.739E+003 8.65E+004 -7.204E+004 l.09E+OD4 l.522E+004 1.13E+004 5.318E+004 5.266E+004 9.574E+004 1.48E+004 4.239E+004 3.337E+004 1.25E+OOS 6.576E+004 l.88E+004 -4. 649E+004 2.565E+004 3.543E+004 2.34E+004 -3. 911E+003

+ =Nuclide identified during the nuclide identification

=Energy line found in the spectrum

> = Calculated MDA is zero due to zero counts in the region, or Dec. Level (pCi/M"2 )

2.235E+004 l.579E+003 9.823E+002 2.617E+003 2.898E+003 3.162E+003 5.231E+003 3.211E+003 4.958E+003 3.141E+003

1. 656E+003 1.342E+004 l.096E+004 1.385E+004 9.574E+003 l.454E+004 8.790E+003 1.398E+004 l.960E+004 2.310E+003 4.072E+004 5.256E+003 5.315E+003 1.832E+004 9.523E+003 l.232E+004 7.084E+003 6.057E+004 2.708E+004 8.626E+003

l. 007E+004 1.153E+004 the region is outside the spectrum, or MDA has not been calculated

@ ~ Half-life too short to be able to perform the decay correction

[43]

GAMM A S P E C T R U M A N A L Y S I S Filename: C:\\Users\\kevin\\Desktop\\Buttress\\00005020. CNF Report Generated On Sample Title Sample Description Sample Identification Sample Type Sample Geometry Peak Locate Threshold Peak Locate Range (in channels)

Peak Area Range (in channels)

Identification Energy Tolerance Sample Size Sample Taken On Acquisition Started Live Time Real Time Dead Time 6/12/2018 1: 02: 28 PM B306108AFJFC004GD U-2 4B BUTTRESS PIT 004 GAMMA DIRECT 3.00 85 -

85 -

10.000 8192 8192 keV 1.870E+001 M... 2 6/11/2018 6/11/2018 3: 00 : 00 PM 3: 00 : 02 PM 600.0 seconds 601.6 seconds 0.27 %

Energy Calibration Used Done On Efficiency Calibration Used Done On Efficiency ID 3/15/2018 6/12/2018 BUTTRESS PIT A

[44]

Peak Analysis Report 6/12/2018 1:02:28 PM Page 2

P E A K A N A L Y S I S REPORT Detector Name:

5456-A Sample

Title:

B306108AFJFC004GD Peak Analysis Performed on:

6/12/2018 Peak Analysis From Channel:

Peak Analysis To Channel:

1: 02: 27 PM 85 8192 Peak ROI ROI Peak Energy FWHM Net Peak Net Area No. start end centroid (keV) 1 126-134 2

296-318 3

335-345 4

947-973 5

1171-1188 6

1346-1359 7

1396-1414 8

2034-2054 9

2323-2338 10 2426-2442 11 3065-3077 12 3633-3649 13 3868-3881 14 4470- 4486 15 5827-5853 16 7046-7065 130. 61 300.46 339.97 954.20 1180.61 1352.58 1406.82 2040.80 2331.03 2435.64 3070.89 3641.81 3874.63 4478.25 5840.92 7055.83 32.65 75.11 84.99 23 8. 55 295. 15 338. 14 351. 71 510.20 582.76 608.91 767.72 91 0.45 968.66 1119.56 1460.23 1763.96 M ~ First peak in a multiplet region m ~ Other peak in a multiplet region F = Fitted singlet Errors quoted at 2.000 sigma (keV)

Area Uncert.

1. 08 0.94 0.56 0.86

1. 48 0.68

1. 27 0.43

1. 73 1.64 0.84 0.66 0.30 0.37

1. 58

1. 45 1.27E+002 2.07E+002

6. llE+OOl 2.56E+002 1.51E+002 4.81E+001 2.40E+002 8.68E+001 8.30E+001 2.13E+002 2.45E+001 6.59E+001 3.41E+001 5.40E+001 4.60E+002 8.55E+001 43.21 148.58 78.34 86.68 51.79 36.70 46.48 39.56 30.93 41.19 19.31 23.49

15. 74 24.38 44.94 19.43 Continuum Counts 1.31E+002 1.36E+003 6.09E+002 3.67E+002 1.60E+002 1.04E+002 8.92E+001 8.32E+001 5.20E+001 6.66E+001 2.55E+001 2.31E+001 9.91E+OOO 3.00E+OOl 1.02E+001 2.52E+OOO

[45]

Interference Corrected Activity Report 6/12/2018 1:02:28 PM Page 3

N U C L I D E I D E N T I F I C A T I O N R E P O R T Sample

Title:

B306108AFJFC004GD Nuclide Library Used: C:\\GENIE2K\\CAMFILES\\Zion Lib-BNL.NLB I **************., **

I' IDENTIFIED NUCLIDES Nuclide Id Energy Yield Activity Activity Name Confidence (keV)

(%)

(pCi/MA2 )

Uncertainty K-40 0.999 1460.82*

10. 66 8.36334E+OOS 1.09340E+005 Eu-155 0.346 86.55*

30.70 9.08075E+003 1.17841E+004 105.31

21. 10 Tl-208 1.000 583.19*

85.00

1. 06 004E+004 4.15097E+003 Pb-212 1.000 238.63*

43.60 3.55217E+004 1.33482E+004 Bi-214 1.000 609.32*

45.49 5.24037E+004

1. 19167E+O 04 1120.29*

14.92 5.92569E+004 2.71621E+004 1764.49*

15.30 1.23 423E+005 2.97521E+004 Pb-214 1.000 295.22*

18.42 5.64938E+004

2. 13507E+004 351.93*

35.60 5.21370E+004

1. 27669E+004 Ac-228 1.000 338.32*

11. 27 3.21422E+004 2.50463E+004 911.20*

25.80 3.67833E+004 1.35792E+004 968.97*

15. 80 3.22717E+004 1.51932E+004

=Energy line found i n the spectrum.

@ ~ Energy line not used for Weighted Mean Activity Energy Tolerance :

10.000 keV Nuclide confidence index threshold ~

0.30 Errors quoted at

2. 000 sigma

[46]

Interference Corrected Activity Report 6/12/2018 1:02:28 PM Page 4

I N T E R F E R E N C E C O R R E C T E D R E P O R T Nuclide Name K-40 Eu-155 Tl-208 Pb-212 Bi-214 Pb-214 Ac-228 Nuclide Id Confidence 0.999 0.346

1. 000 1.000 1.000

1. 000

1. 000 Wt mean Activity (pCi/MA2 )

8.363335E+005 9.080755E+003 1.060036E+004 3.552173E+004 6. 180016E+004 5.328448E+004 3.440934E+004 Wt mean Activity Uncertainty 1.093404E+OOS l.178412E+004 4.150975E+003 1.334822E+004 1.024525E+004 1.095739E+004 9.386717E+003

? = Nuclide is part of an undetermined solution X ~ Nuclide rejected by the interference analysis Nuclide contains energy lines not used in Weighted Mean Activity Errors quoted at 2.000 sigma

[47]

Interference Corrected Activity Report U N I D E N T I F I E D Peak Locate Performed on:

Peak Locate From Channel:

Peak Locate To Channel:

Peak Energy Peak Size in 6/12/2018 P E A K S 6/12/2018 85 8192 Peak CPS 1:02:28 PM 1: 02:27 PM No.

(keV)

Counts per Second

% Uncertainty Peak Type 1

32.65 2

75. 11 8

510.20 11 767.72 M

~ First peak in m - Other peak in F = Fitted singlet Errors quoted at 2.123 4E-001 3.4445E-001 1.4459E-001 4.0800E-002 a multiplet a multiplet 2. 000 sigma region region 33.91 71.89 45.60 78.87 Page 5

Tol.

Nuclide

[48]

Nuclide MDA Report 6/12/2018 1:02:28 PM Page 6

N U C L I D E MD A R E P O R T

+-

+

Detector Name:

Sample Geometry:

Sample

Title:

Nuclide Library used:

Nuclide Name K-40 Co-60 Nb-94 Ag-108m Cs-134 Cs-137 Eu-152 Eu-154 Eu-155 Tl-208 Bi-212 Pb-212 Bi-214 Pb-214 Ra-226 Ac-228 Am-241 Energy (keV) 1460.82*

1173.23 1332.49 702.65 871.09 433.90 614.30 722.90 604.72 795.86 661. 66 121.78 344.28 1408.01 123. 07 723.30 1274.43 86.55*

105.31 583.19*

727.33 238.63*

609.32*

1120.29*

1764.49*

295.22*

351. 93

186.21 338.32*

911.20*

968.97*

59.54 5456-A B306108AFJFC004GD C:\\GENIE2K\\CAMFILES\\Zion Lib-BNL.NLB Yield

( % )

10.66 99.85 99.98

99. 81 99.89 90.50 89.80 90.80 97.62 85.46

85. 10 28.67 26.60

21. 0 7 40.40 20.06 34.80 30.70

21. 1 0

85. 00 6.67 43.60 45.49 14.92 15.30 18.42 35.60 3.64

11. 27 25.80 15.80 35.90 Line MDA (pCi/MA2 )

4.508E+004 7.210E+003 6.245E+003 6.240E+003 7.250E+003 6.756E+003 1.148E+004 8.013E+003

1. 067E+O 04 7.294E+003 7.949E+003 3.008E+004 2.385E+004 3.225E+004 2.140E+004 3.628E+004

1. 959E+O 04 1.917E+004 4.176E+004 5.597E+003 1.099E+005 1.880E+004 1.239E+004 3.807E+004 l.812E+004 2.901E+004

1. 298E+004 2.168E+005 3.918E+004

1. 708E+004

l. 899E+004 2.427E+004 Nuclide MDA

{pCi/M... 2 )

Activity (pCi/MA2 )

4.51E+004 8.363E+OOS 6.24E+003 4.767E+003 2.797E+003 6.24E+003 -4.081E+003

1. 996E+003 6.76E+003 S.510E+002

-1.169E+004 6.901E+003 7.29E+003 2.390E+004

-1.948E+003 7.95E+003 2.349E+003 2.38E+004 4.895E+003 1.651E+004 4.747E+003 1.96E+004 1.326E+004 2.024E+004

-1.019E+003 1.92E+004 9.081E+003 1.377E+004 5.60E+003 1.060E+004 1.10E+005 8.472E+004 1.88E+004 3.552E+004 l.24E+004 5.240E+004 5.926E+004 1.234E+OOS

1. 30E+004 5.649E+004 5.214E+004 2.17E+005 1.328E+005 l.71E+004 3.214E+004 3.678E+004 3.227E+004 2.43E+004 -4.431E+003

+ = Nuclide identified during the nuclide identification

~ Energy line found in the spectrum

>=Calculated MDA is zero due to zero counts in the region, or Dec. Level (pCi/MA2 )

2.008E+004 3.377E+003 2.876E+003 2.954E+003 3.436E+003 3.245E+003 5.569E+003 3.821E+003 5.180E+003 3.438E+003 3.787E+003 1.482E+004 1.153E+004 1.491E+004 l.055E+004 1.730E+004 9.104E+003 9.384E+003 2.059E+004 2.626E+003 5.239E+004 9.213E+003 5.865E+003 1.755E+004 7.l05E+003 l.400E+004 6.195E+003 l.064E+005 1.869E+004 7.785E+003 8.215E+003 1.195E+004 the region is outside the spectrum, or MDA has not been calculated

@=Half-life too short to be able to perform the decay correction

[49]

GAMMA S P E C T R U M A N A L Y S I S Filename: C:\\Users\\kevin\\Desktop\\Buttress\\00005019.CNF Report Generated On Sample Title Sample Description Sample Identification Sample Type Sample Geometry Peak Locate Threshold Peak Locate Range (in channels)

Peak Area Range (in channels)

Identification Energy Tolerance Sample Size Sample Taken On Acquisition Started Live Time Real Time Dead Time 6/12/2018 1: 11: 03 PM B306108AFJFCOOSGD U-2 SB BUTTRESS PIT 005 GAMMA DIRECT 3.00 85 -

8192 85 -

8192 10.000 keV 1.870E+001 M~2 6/11/2018 6/11/2018 10:39:00 AM 10:39:51 AM 600. 0 seconds 600.6 seconds 0. 09 %

Energy Calibration Used Done On Efficiency Calibration Used Done On Efficiency ID 3/15/2018 6/12/2018 BUTTRESS PIT A

[50]

Peak Analysis Report 6/12/2018 1:11 :03 PM Page 2

P E A K ANALYS I s REPORT Detector Name:

5456-A Sample

Title:

B306108AFJFC005GD Peak Analysis Performed on:

6/12/2018 1:11:02 PM Peak Analysis From Channel:

85 Peak Analysis To Channel:

8192 Peak ROI ROI Peak Energy FWHM Net Peak Net Area Continuum No. start end centroid (keV)

(keV)

Area Uncert.

Counts 1

126-145 141.33 35.33

1. 94 2.47E+002 68.53 2.39E+002 2

284-306 291.58 72.90 1.22 2.64E+002 133.05 1.07E+003 3

949-959 954.38 238.59 0.70 8.33E+001 47.63 2.00E+002 4

1170 -

1188 1180. 31 295.08

1. 46

1. 27E+002

51. 52 1.59E+002 5

1346-1359 1352.57 338.14 0.80 2.71E+001 36.96 l.14E+002 6

1398-1415 1407.14 351.79

1. 54 2.74E+002 49.13 1.01E+002 7

2325-2340 2331.15 582.79

1. 09 8.98E+001 31.37 5.12E+001 8

2427-2445 2435.05 608.76 1.43 2.61E+002 41.67 4.93E+001 9

3065-3076 3070. 17 767.54

1. 09 2.84E+001 19.04 2.46E+001 10 3635-3650 3642.41 910.60

1. 24 7.68E+001 25.94 3.02E+001 11 3866-3880 3872.29 968.07 0.41 4.27E+001 19.53 1.83E+001 12 4469-4488 4478.35 1119.59

1. 25 8.71E+001 26.95 2.59E+001 13 4942-4956 4949. 21 1237.30 0.41 4.35E+001 16.87 9.48E+OOO 14 5826-5854 5840.68 1460.17 1.66 4.79E+002 45.27 7.24E+OOO 15 7046-7065 7056.06 1764.01

2. 19 8.35E+001 20.97 7.SlE+OOO M

First peak in a multiplet region m - Other peak in a multiplet region F = Fitted singlet Errors quoted at 2. 000 sigma

[51]

Interference Corrected Activity Report 6/12/2018 1: 11:03 PM Page 3

N U C L I D E I D E N T I F I C A T I O N R E P O R T Sample

Title:

B306108AFJFC005GD Nuclide Library Used: C:\\GENIE2K\\CAMFILES\\Zion Lib-BNL.NLB IDENTIFIED NUCLIDES I

I Nuclide Id Energy Yield Activity Activity Name Confidence (keV)

(%)

(pCi/MA2 )

Uncertainty K-40 0.999 1460.82*

10.66 8.70813E+005 1.11797E+005 Tl-208

1. 000 583. 19*

85. 00 1.14686E+004 4.23776E+003 Pb-212 1.000 238.63*

43.60 l.15860E+004 6.88145E+003 Bi-214 0.999 609.32*

45.49 6.40111E+004 1.28021E+004 1120.29*

14.92 9.55451E+004 3.05387E+004 1764.49*

15. 30

1. 20547E+005 3.17757E+004 Pb-214 1.000 295.22*

18.42 4.74464E+004 2.06830E+004 351.93*

35.60 5.95098E+004 1.39081E+004 Ac-228 0.999 338.32*

11. 27 1.81380E+004 2.48702E+004 911. 2 O*

25.80 4.28589E+004 1.50564E+004 968.97*

15.80

4. 03876E+004 1.88513E+004

Energy line found in the spectrum.

@ : Energy line not used for Weighted Mean Activity Energy Tolerance :

10.000 keV Nuclide confidence index threshold; 0.30 Errors quoted at

2. 000 sigma

[52]

Interference Corrected Activity Report 6/12/2018 1 :11:03 PM Page 4

I N T E R F E R E N C E C O R R E C T E D R E P O R T Nuclide Name K-40 Tl-208 Pb-212 Bi-214 Pb-214 Ac-228 Nuclide Id Confidence 0.999 1.000 1.000 0.999

1. 000 0.999 Wt mean Activity (pCi/M"2 )

8.708133E+005 l.146861E+004 1.158603E+004 7.501116E+004 5.575355E+004 3.755218E+004 Wt mean Activity Uncertainty l.117968E+005 4.237756E+003 6.881450E+003 1.106737E+004 l.154136E+004 l.063473E+004

? = Nuclide is part of an undetermined solution X = Nuclide rejected by the interference analysis Nuclide contains energy lines not used in Weighted Mean Activity Errors quoted at 2.000 sigma

[53]

Interference Corrected Activity Report U N I D E N T I F I E D Peak Locate Performed on:

Peak Locate From Channel:

Peak Locate To Channel:

Peak Energy Peak Size in 6/12/2018 P E A K S 6/12/2018 85 8192 Peak CPS 1: 11 :03 PM 1:11 :02 PM No.

(keV)

Counts per Second

% Uncertainty Peak Type 1

35.33 4.1228E-001 2

72.90 4.4030E-001 9

767.54 4.7327E-002 13 1237.30 7.2531E-002 M = First peak in a multiplet region m = Other peak in a multiplet region F = Fitted singlet Errors quoted at 2. 000 sigma 27.70 50.36 67.05 38.76 Page 5

Tol, Nuclide

[54]

Nuclide MDA Report 6/12/2018 1 : 11 :03 PM Page 6

N U C L I D E MD A R E P O R T

+

Detector Name:

Sample Geometry:

Sample

Title:

5456-A B306108AFJFC005GD Nuclide Library Used: C:\\GENIE2K\\CAMFILES\\Zion Lib-BNL.NLB Nuclide Name K-40 Co-60 Nb-94 Ag-108m Cs-134 Cs-137 Eu-152 Eu-154 Eu-155 Tl-208 Bi-212 Pb-212 Bi-214 Pb-214 Ra-226 Ac-228 Am-241 Energy (keV) 1460.82*

1173.23 1332.49 702.65 8 71. 09 433.90 614.30 722.90 604.72 795.86 661.66 121.78 344.28 1408.01 123. 07 723.30 1274.43 86.55 105.31 583.19*

727.33 238.63*

609.32*

1120.29*

1764.49*

295. 22*

351.93*

186. 21 338.32*

911. 20*

968.97*

59.54 Yield

(%)

10.66 99.85 99.98

99. 81 99.89 90.50 89.80 90.80 97.62 85.46 85.10 28.67 26.60

21. 0 7

40. 4 0 20.06 34.80 30.70 21.10 85.00 6.67 43.60 45.49

14. 92

15. 30 18.42 35.60 3.64 11.27 25.80 15.80 35.90 Line MDA (pCi/M"2 )

3.961E+004 7.164E+003 5.789E+003 5.899E+003 6.427E+003 6.474E+003 1.155E+004 7.104E+003

1. 084E+004 8.046E+003 8.479E+003 2.935E+004 2.419E+004 3.195E+004 2.082E+004 3.271E+004 2.135E+004 2.993E+004 4.207E+004 5.599E+003

1. 031E+005 1.044E+004 1.130E+004 3.805E+004 2.832E+004 2.947E+004 1.357E+004 2.124E+005 4.081E+004 1.906E+004 2.515E+004 2.137E+004 Nuclide MDA (pCi/M"2 )

Activity (pCi/M"2 )

3.96E+004 5.79E+003 5.90E+003 6.47E+003 8.05E+003 8.48E+003 2.42E+004 2.08E+004 2.99E+004 5.60E+003 1.03E+005 1.04E+004 l.13E+004 l.36E+004 2.12E+005 1.91E+004 2.14E+D04 8.708E+OOS 7.842E+002 l.549E+003

1. 292E+OOO

-3.806E+003

-1. 596E+003

-1.470E+003

-1.403E+003

-2.199E+003 3.259E+003 6.902E+003 3.081E+003 4.853E+003

1. 475E+004

1. 833E+O 04 1.121E+004 1.430E+D03 7.486E+003 3.481E+004 1.147E+004 7.552E+004 1.159E+004 6.401E+004 9.555E+004 1.205E+005 4.745E+OD4 5.951E+004

-2.017E+004 l.814E+D04 4.286E+004 4.039E+004

-1.869E+004

+ - Nuclide identified during the nuclide identification

=Energy line found in the spectrum

> ~ Calculated MDA is zero due to zero counts in the region, or Dec. Level (pCi/M"2) 1.735E+004 3.354E+003 2.648E+003 2.783E+003 3.024E+003 3.104E+003 5.606E+003 3.366E+003 5.267E+003 3.814E+003 4.052E+003 1.446E+OD4 1.171E+004

1. 476E+OD4 1.026E+004 l.551E+004 9.987E+003

1. 4 76E+O 04 2.074E+004 2.627E+003 4.901E+OD4 5.030E+003 5.319E+003 l.754E+D04 1.221E+004 l.423E+OD4 6.493E+003

1. 042E+O 05

1. 95DE+O 04 8.773E+OD3 1.129E+004 1.05DE+004 the region is outside the spectrum, or MDA has not been calculated

@ = Half-life too short to be able to perform the decay correction

[55]

GAMM A S P E C T R U M A N A L Y S I S Filename: C:\\GENIE2K\\CAMFILES\\00003433.CNF Report Generated On Sample Title 6/16/2018 1:59:56 PM Sample Description Sample Identification Sample Type Sample Geometry Peak Locate Threshold Peak Locate Range (in channels)

Peak Area Range (in channels)

Identification Energy Tolerance Sample Size B306108AFJFC006GD U-2 BUTTRESS PIT 6A 006 GAMMA DIRECT 3.00 85 -

8192 85 -

8192 10.000 keV 1.870E+001 MA2 Sample Taken On Acquisition Started 6/14/2018 6/14/2018 10: 11 :00 AM 10: 11 :48 AM Live Time Real Time Dead Time 600.0 seconds 600.5 seconds 0. 09 %

Energy Calibration Used Done On Efficiency Calibration Used Done On Efficiency ID 3/15/2018 6/11/2018 BUTTRESS PIT A

[56]

Peak Analysis Report 6/16/2018 1:59:56 PM Page 2

P E A K ANALYS I s RE P O R T Detector Name:

5452A Sample

Title:

B306108AFJFC006GD Peak Analysis Performed on:

6/16/2018 1 :59:55 PM Peak Analysis From Channel:

85 Peak Analysis To Channel:

8192 Peak ROI ROI Peak Energy FWHM Net Peak Net Area Continuum No. start end centroid (keV)

(keV)

Area Uncert.

Counts 1

327-354 337.77 84.44 0.68 2.29E+002 153.47

1. 25E+003 2

945-959 953.66 238.42 0.89 1.14E+002 52.17 1.97E+002 3

1170- 1187 1179.57 294.89 0.52 1.12E+002 48.56 1.46E+002 4

1349-1362 1354. 06 338.51 0.77 5.09E+001 33.57 8.31E+001 5

1397-1416 1406.29 351.57

1. 31 2.13E+002 49.12 1.12E+002 6

2321-2338 2329.84 582.46

1. 27 7.38E+001 28.59 4.02E+001 7

2421-2444 2434.43 608.61 0.85 2.58E+002 41.93 4.52E+001 8

3064-3076 3069.95 767.49 0.29 2.53E+001 16.96

1. 77E+001 9

3633-3649 3641.67 910.42 0.43 5.55E+001 23.79 2.75E+001 10 3864-3877 3870.82 967.71 0.40 3.75E+001 16.30 1.05E+001 11 4470- 4484 4477.12 1119.28 0.53 4.73E+001 17.48 9.66E+OOO 12 4942-4955 4948.37 1237.09 0.51 2.22E+001 16.49 1.58E+001 13 5825-5852 5838.59 1459.65 1.29 3.61E+002

41. 68 1.66E+001 14 7045-7062 7054.33 1763.58

1. 74 6.70E+001 16.37 O. OOE+OOO M "" First peak in a multiplet region m = Other peak in a multiplet region F = Fitted singlet Errors quoted at 2. 000 sigma

[57]

Interference Corrected Activity Report 6/16/2018 1 :59:56 PM Page 3

N U C L I D E I D E N T I F I C A T I O N R E P O R T Sample

Title:

B306108AFJFC006GD Nuclide Library Used: C:\\GENIE2K\\CAMFILES\\Zion Lib-BNL.NLB IDENTIFIED NUCLIDES e

I Nuclide Id Energy Yield Activity Activity Name Confidence (keV)

( % )

(pCi/M,...2 )

Uncertainty K-40 0.998 1460.82*

10.66 6.65096E+005 9.60151E+004 Eu-155 0.345 86.55*

30.70 3.32731E+004 2.32326E+004 105. 31

21. 10 Tl-208 0.999 583.19*

85.00 9.43114E+003 3.82314E+003 Pb-212 1.000 238.63*

43.60 1.56497E+004 7.59033E+003 Bi-214 0.999 609.32*

45.49 6.33693E+004 l.28145E+004 1120.29*

14.92 5.23126E+004 l.97628E+004 1764.49*

15.30 9.81530E+004 2.52383E+004 Pb-214 1.000 295.22*

18.42 4.12719E+004 l.91311E+004 351.93*

35.60 4.60411E+004 1.26423E+004 Ac-228 0.999 338.32*

11.27 3.37638E+004 2.28999E+004 911.20*

25.80 3.11348E+004 l.36805E+004 968.97*

15.80 3.56970E+004 1.58628E+004

=Energy line found i n the spectrum.

@ ~ Energy line not used for Weighted Mean Activity Energy Tolerance :

10.000 keV Nuclide confidence index threshold ~

0.30 Errors quoted at 2.000 sigma

[58]

Interference Corrected Activity Report 6/16/2018 1: 59:56 PM Page 4

I N T E R F E R E N C E C O R R E C T E D REPORT Nuclide Name K-40 Eu-155 Tl-208 Pb-212 Bi-214 Pb-214 Ac-228 Nuclide Id Confidence 0.998 0.345 0.999

1. 000 0.999 1.000 0.999 Wt mean Activity (pCi/M"2 )

6.650965E+OD5 3.327312E+OD4 9.431144E+003 1.564971E+004 6.594258E+004 4.459152E+004 3.319678E+D04 Wt mean Activity Uncertainty 9.6015DSE+004 2.323257E+004 3.823144E+003 7.590326E+003 9.891765E+003 l.054738E+OD4 9.438937E+003

? = Nuclide is part of an undetermined solution X = Nuclide rejected by the interference analysis Nuclide contains energy lines not used in Weighted Mean Activity Errors quoted at

2. 000 sigma U N I D E N T I F I E D Peak Locate Performed on:

Peak Locate From Channel:

Peak Locate To Channel:

P E A K S 6/16/2018 85 8192 Peak CPS 1:59:55 PM Peak No.

Energy (keV)

Peak Size in Counts per Second

% Uncertainty Peak Type 8

767.49 12 1237.09 4.2161E-002 3.7029E-002 M = First peak in a multiplet region m = Other peak in a multiplet region F = Fitted singlet Errors quoted at 2. 000 sigma

67. 04 74.23 Tol.

Nuclide

[59]

Nuclide MDA Report 6/16/2018 1:59:56 PM Page s

N U C L I D E MD A R E P O R T

+

Detector Name:

5452A Sample Geometry:

Sample

Title:

B306108AFJFC006GD Nuclide Library Used : C:\\GENIE2K\\CAMFILES\\Zion Lib-BNL.NLB Nuclide Name K-40 Co-60 Nb-94 Ag-108m Cs-134 Cs-137 Eu-152 Eu-154 Eu-155 Tl-208 Bi-212 Pb-212 Bi-214 Pb-214 Ra-226 Ac-228 Am-241 Energy (keV) 1460.82*

1173.23 1332.49 702.65 871.09 433.90 614.30 722.90 604.72 795.86 661. 66 121. 78 344.28 1408.01 123.07 723.30 1274.43 86.55*

105.31 583.19*

727.33 238.63*

609.32*

1120. 29*

1764.49*

295.22*

351.93*

186.21 338.32*

911. 2 O*

968.97*

59.54 Yield

(%)

10.66 99.85 99.98

99. 81 99.89 90.50 89.80 90.80 97.62 85.46 85.10 28.67 26.60

21. 07

40. 40 20.06 34.80 30.70 21.10 85.00 6.67 43.60 45.49

14. 92

15. 30 18.42 35.60 3.64

11. 27 25.80 15.80 35.90 Line MDA (pCi/MA2 )

5.666E+004 8.414E+003 7.026E+003 6.177E+003 6.318E+003 6.868E+003

1. 062E+004 7.309E+003

1. 033E+004 7.477E+003 8.295E+003 2.666E+004 2.382E+004 2.745E+004

1. 883E+004 3.283E+004

1. 865E+004 3.629E+004 3.886E+004 5.145E+003 9.574E+004 1.111E+004 1.156E+OD4 2.258E+D04 3.964E+003 2.759E+OD4 l.460E+D04 1.990E+005 3.498E+004 1.863E+004 1.942E+004 2.270E+D04 Nuclide MDA (pCi/M... 2

)

Activity (pCi/MA2 )

5.67E+004 6.651E+OOS 7.03E+003 1.542E+003 9.148E+OD2 6.18E+D03 3.676E+003 7.664E+002 6.87E+003 3.823E+OD3 2.587E+OD3 8.820E+003 7.48E+D03 6.109E+OOO 5.957E+OD3 8.29E+D03 5.171E+003 2.38E+D04 9.652E+003

-1. 053E+OD4 1.165E+OD4 1.87E+D04 -2.501E+002

1. 799E+O 04

-4.363E+OD3 3.63E+004 5.15E+003 9.57E+004 1.11E+004 3.96E+003 1.46E+004 3.327E+D04

-l.208E+004 9.431E+OD3 3.270E+OD3

1. 565E+OD4 6.337E+004 5.231E+004 9.815E+004 4.127E+004 4.604E+D04

1. 99E+005 -3.313E+004

l. 86E+004 3.376E+004 3.113E+D04 3.570E+004 2.27E+004 -1.968E+004

+=Nuclide identified during the nuclide identification

~ Energy line found in the spectrum

>=Calculated MDA is zero due to zero counts in the region, or Dec. Level (pCi/M... 2 )

2.584E+004 3.977E+003 3.264E+003 2.922E+003 2.968E+003 3.301E+003 5.140E+003 3.468E+003 5.013E+003 3.528E+003 3.959E+003 1.311E+004 1.152E+004 1.249E+004 9.260E+003 1.557E+004 8.631E+003 1.795E+004 1.914E+004 2.400E+OD3 4.532E+OD4 5.37DE+003 5.449E+003 9.794E+D03 O.OOOE+OOO 1.330E+004 7.007E+003 9.756E+004 1.659E+004 8.554E+003 8.421E+003 l.117E+004 the region is outside the spectrum, or MDA has not been calculated

@=Half-life too short to be able to perform the decay correction

[60]

GAMM A S P E C T R U M A N A L Y S I S Filename: 5452A Report Generated On Sample Title Sample Description Sample Identification Sample Type Sample Geometry Peak Locate Threshold Peak Locate Range (in channels)

Peak Area Range (in channels)

Identification Energy Tolerance Sample Size Sample Taken On Acquisition Started Live Time Real Time Dead Time 6/14/2018 9:25:34 AM B306108AFQFC002GD U-2 2A BUTTRESS PIT 002 GAMMA DIRECT

3. 00 85 -

85 -

10.000 8192 8192 keV l.870E+001 MA2 6/14/2018 6/14/2018 9:15:00 AM 9:15:32 AM 600. 0 seconds 601.3 seconds 0.21 %

Energy Calibration Used Done On Efficiency Calibration Used Done On Efficiency ID 3/15/2018 6/11/2018 BUTTRESS PIT A

[61]

Peak Analysis Report 6/14/2018 9:25:34 AM Page 2

P E A K A N A L Y S I S R E P O R T Detector Name:

5452A Sample

Title:

B306108AFQFC002GD Peak Analysis Performed on:

6/14/2018 9:25:33 AM Peak Analysis From Channel:

85 Peak Analysis To Channel:

8192 Peak ROI ROI Peak Energy FWHM Net Peak Net Area Continuum No. start end centroid (keV)

(keV)

Area Uncert.

Counts 1

285-310 300.22 75.05 0.98 4.78E+002 136.35 9.81E+002 2

333-344 339.73 84.93 0.40 7.27E+001 69.34 4.51E+002 3

947-975 954. 71 238.68 0.42 1.87E+002 76.30 2.73E+002 4

1172-1188 1179.95 294.99

1. 36 8.75E+001 41.92 l.13E+002 5

1346-1359 1351.43 337.86

1. 21 5.55E+001 3 0.62 6.45E+001 6

1398-1416 1406.05 351. 51 0.99 1.90E+002 43.96 8.72E+001 7

2324 -

2338 2330.28 582.57 0.40 6.00E+OOl 28.63 5.00E+OOl 8

2426-2443 2434.31 608.58 0.94 2.10E+002 36.21 3.60E+001 9

3633-3648 3640.30 91 0. 07 1.36 6.lOE+OOl 23.61 2.60E+001 10 4469-4483 4476. 41 1119. 10 0.83 7.18E+001 20.98 1.32E+001 11 5826-5851 5839.42 1459.86 2.04 3.62E+002 44.07 2.90E+001 12 7045-7062 7054. 07 1763.52

1. 72 4.99E+001 19.85

1. 41E+001 M = First peak in a multiplet region m ~ Other peak in a multiplet region F - Fitted singlet Errors quoted at 2. 000 sigma

[62]

Interference Corrected Activity Report 6/14/2018 9:25:34 AM Page 3

N U C L I D E I D E N T I F I C A T I O N REPORT Sample

Title:

B306108AFQFC002GD Nuclide Library Used: C:\\GENIE2K\\CAMFILES\\Zion Lib-BNL.NLB I

I IDENTIFIED NUCLIDES

!I JI

' ******** i **** p Nuclide Id Energy Yield Activity Activity Name Confidence (keV)

( % )

(pCi/M"'2 )

Uncertainty K-40 0.999 1460.82*

10.66 6.66240E+005 9.96283E+004 Eu-155

0. 346 86.55*

30.70 1.05415E+004 1.02731E+004 105.31 21.10 Tl-208 0.999 583.19*

85.00 7.66026E+003 3.77115E+003 Pb-212

1. 000 238.63*

43.60 2.56989E+004

1. 12672E+O 04 Bi-214 0.999 609.32*

45.49 5.16116E+004

1. 084 76E+O 04 1120.29*

14.92 7.93206E+004 2.40337E+004 1764.49*

15.30 7.30865E+D04 2.96597E+OD4 Pb-214

1. 000 295.22*

18.42 3.23480E+004 1.63465E+004 351.93*

35.60 4.09489E+OD4 l.12934E+004 Ac-228 0.564 338.32*

11. 27 3.68249E+004

2. 11000E+004 911.20*

25.80 3.42247E+004 l.36515E+OD4 968.97 15.80

=Energy line found in the spectrum.

@ = Energy line not used for Weighted Mean Activity Energy Tolerance :

10.000 keV Nuclide confidence index threshold =

0.30 Errors quoted at 2.000 sigma

[63]

Interference Corrected Activity Report 6/14/2018 9:25:34 AM Page 4

I N T E R F E R E N C E C O R R E C T E D R E P O R T Nuclide Name K-40 Eu-155 Tl-208 Pb-212 Bi-214 Pb-214 Ac-228 Nuclide Id Confidence 0.999 0.346 0.999

1. 000 0.999 1.000 0.564 Wt mean Activity (pCi/M"2 }

6.662395E+005 l. 054152E+004 7.660259E+003 2.569891E+004 5.797981E+004 3.817002E+004 3.499198E+004 Wt mean Activity Uncertainty 9.962828E+OD4 1.027307E+004 3.771153E+003 1.126723E+004 9.379747E+003 9.291598E+003 1.146178E+004

?

~ Nuclide is part of an undetermined solution X ~ Nuclide rejected by the interference analysis

@ ~ Nuclide contains energy lines not used in Weighted Mean Activity Errors quoted at 2.000 sigma

[64]

Interference Corrected Activity Report Peak U N I D E N T I F I E D Peak Locate Performed on:

Peak Locate From Channel:

Peak Locate To Channel:

Energy Peak Size in 6/14/2018 P E A K S 6/14/2018 85 8192 Peak CPS 9:25:34 AM 9:25:33 AM No.

(keV)

Counts per Second

% Uncertainty Peak Type 1

75.05 7.9648E-001 28.53 M = First peak in a multiplet region m = Other peak in a multiplet region F

Fitted singlet Errors quoted at 2. 000 sigma Page 5

Tol.

Nuclide

[65]

Nuclide MDA Report 6/14/2018 9:25:34 AM Page 6

N U C L I D E MD A R E P O R T

+

Detector Name:

Sample Geometry:

Sample

Title:

5452A B306108AFQFC002GD Nuclide Library Used : C: \\GENI_E2K\\CAMFILES\\Zion Lib-BNL. NLB Nuclide Name K-40 Co-60 Nb-94 Ag-108m Cs-134 Cs-137 Eu-152 Eu-154 Eu-155 Tl-208 Bi-212 Pb-212 Bi-214 Pb-214 Ra-226 Ac-228 Am-241 Energy (keV) 1460.82*

1173.23 1332.49 702.65 871.09 433.90 614. 3 0 722.90 604.72 795.86 661.66 121.78 344.28 1408.01 123.07 723. 3 0 1274.43 86.55*

105.31 583.19*

727.33 238.63*

609.32*

1120.29*

1764.49*

295.22*

351.93*

186.21 338.32*

911. 20*

968.97 59.54 Yield

(%)

10.66 99.85 99.98

99. 81 99.89 90.50 89.80 90.80 97.62 85.46

85. 10 28.67 26.60

21. 07 40.40 20.06 34.80 30.70 21.10 85.00 6.67 43.60 45.49 14.92 15.30 18.42 35.60 3.64

11. 27 25.80 15.80 35.90 Line MDA (pCi/MA2 )

7.228E+OD4 6.841E+003 5.987E+D03 5.678E+003 6.245E+003 6.342E+D03

1. 002E+004 6.590E+003 9.874E+003 6.732E+003 6.744E+003 2.646E+004 2.150E+004 3.172E+004 1.849E+004 3.014E+004

1. 832E+O 04

1. 642E+004 3.656E+004 5.405E+003 8.636E+004 1.645E+004 9.438E+003 2.547E+004 3.756E+004 2.383E+004 1.274E+004 1.876E+OOS 3.097E+004 1.785E+004 4.907E+004 1.889E+004 Nuclide MDA (pCi/MA2 )

Activity (pCi/MA2 )

7.23E+004 6.662E+005 5.99E+003 -2.551E+003 4.698E+003 5.68E+003 2.229E+~Ol 2.562E+003 6.34E+003 4.189E+003

-2.028E+003 4.753E+003 6.73E+003 -1.093E+003

1. 12 BE+003 6.74E+003 -6.948E+002 2.15E+004 2.806E+004

-1.422E+003

-7.244E+003 1.83E+004 -8.034E+003 2.683E+004 1.64E+004 5.41E+003 8.64E+004

1. 65E+O 04 9.44E+003 1.27E+004 1.88E+OOS 1.78E+004

1. 89E+004

-1.706E+004 l.054E+004 1.825E+004 7.660E+003 5.401E+004 2.570E+004 5.161E+004 7.932E+004 7.309E+004 3.23SE+004 4.095E+004

1. 665E+OOS 3.682E+004 3.422E+004

5. 049E+004

9. 113E+003

+ =Nuclide identified during the nuclide identification

=Energy line found in the spectrum

> = Calculated MDA is zero due to zero counts in the region, or Dec. Level (pCi/MA2 )

3.365E+004 3.190E+003 2.744E+003 2.672E+003 2.932E+003 3.038E+003 4.842E+003 3.109E+003 4.783E+003 3.155E+003 3.184E+003 1.301E+004 1.036E+004 l.463E+004 9.089E+003 1.422E+004 8.463E+003 8.016E+003 1.799E+004 2.530E+003 4.063E+004 8.041E+003 4.387E+003 1.124E+004 1.680E+004 1.141E+004 6.078E+003 9.189E+D04

1. 459E+004 8.165E+003 2.325E+004 9.268E+003 the region is outside the spectrum, or MDA has not been calculated

@ ~ Half-life too short to be able to perform the decay correction

ML19295G843: Difference between revisions

Latest revision as of 07:59, 2 January 2025

Contents

Text

SUMMARY

SUMMARY

Ratio of concentration (or nuclide mixture fraction) of radionuclide n to surrogate radionuclide Using the OpDCGLs for the Turbine Building basement presented in Table 2 and the maximum ratios from Table 3, the following surrogate calculations were performed for FSS unit 06108; Equation 3 (137)

Description:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Navigation menu

ML19295G843: Difference between revisions

Latest revision as of 07:59, 2 January 2025

Text

SUMMARY

SUMMARY

Ratio of concentration (or nuclide mixture fraction) of radionuclide n to surrogate radionuclide Using the OpDCGLs for the Turbine Building basement presented in Table 2 and the maximum ratios from Table 3, the following surrogate calculations were performed for FSS unit 06108; Equation 3 (137)

Description:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Title:

Navigation menu

Search