ML15061A033

Attachment 2 - Ihi Southwest Inner Diameter Examination Data, Part 2 of 2

ML15061A033
Person / Time
Site:	Summer
Issue date:	02/25/2015
From:	South Carolina Electric & Gas Co
To:	Office of Nuclear Reactor Regulation
Shared Package
ML15061A029	List: ML15061A031 ML15061A033 ML15061A034 ML15061A035 RC-15-0020, Attachment 2 - Ihi Southwest Inner Diameter Examination Data, Part 2 of 2 RC-15-0020, Attachment 3 - Final NDE Inspection Reports RC-15-0020, Attachment 4 - First Inservice Inspection for Steam Generator a RC-15-0020, Attachment 5 - Westinghouse LTR-PAFM-12-86 Flaw Tolerance Evaluation to Support Re-Categorization of V.C. Summer Unit 1 Steam Generator Nozzle to Safe End Dissimilar Metal Weld Inspection Requirements
References
CR-12-00556, RC-15-0020
Download: ML15061A033 (85)

Text

LHi' IHI Southwest Technologies Examination Summary RecordUHSot Caroin Bobi &laft: Virgil C. Sumner Nuclear S~tlon Urtt I1'Gas I.uftmg:

R-21 ISunuaw"Shat No. 00200Sy/stem:

Steam Generator Una hrf. "AK SG Out N=z-l.SE I~ffcallon; 1-4100A-32 (DM)Not NE Callb__th__

Exam Slt 1Method E CN Exembumzon h'eat NO%., No. NRI Ovletr hrksAUT ISwT-PDII-AUTlr2/1 UT Pnre I(e-mr) 110002 0-7 X UT TWO& AWY ElrmAUT ISwT-POI-AUT11r2/011 UTProbe 2 (M0-8I 110002 6-7 X LrT TWD &AWY ExamAUT ISWiT-POI-AUT 11i2RI Lrr 1 (6-) 110001 8-10 X -UTCW & CCW ExwnALIT ISWiT-POI-AUT1I/2/0/1 LIT Probe 2(S0-881 110001 8- 10 X LIT CW & CCW ExWaAET ISwT-PDI-AET3f2IOID Er Probe I ET3.VCS-01 6-10 X Eddy Cwrnyt ExamAET ISwT-POI-AET3?2/0J0 ET Probe 2 ET0S-VCS.01 6-10 X Eddy Cuemnt EBarnExamination Summary:This weld was examined from the inside surface using SG-NExT, T4i1. & MS5800 examhation equipmenL The exambiaWion was ltrimted due to the proximity of the nozlJe taper. The examination coverage was 92%.No recrdable indicatons were detected during this examination.

PreparedBy-,

SbvenjT~dd Signature:

• ,-Date:-

CDtte: 81ganature; Date-,~ v~~

I I IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSite/Plant:

V.C. Summer'Urnt

] Weld Identification:

1.4100A-32 (DM) ProiRev/Chp lCN: ISwT-PDI-AUTI 1/2/0/1 Examnation No.: ID-6Project No.. 13-1107 Weld

Description:

SOA" Out No..to.SE (o0.15°)

Device 136-00045 Mod.Conf.:

138-00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Tern arture OFData Acquisition Operator (a) / SNT Level: Carlos H. Barberino/lIT 2-Apr-14 Start End Start Xnd1805 1847 90 90Scan Controller P2ri mers Increment Axis Planned Actual Stan Axis Planned Actual Positional Parameters Ctrobeler:

SG-N(oxT Lower Limit 71.30 71.60 Lower Limit 0D00 0.00 Beam Dircton:

Twd/Aw0Scan: X Rotator Drive Upper Limit 78.05 78.05 Uppe'r 1-imift 50.10 50.10 Probe Type: PA22-001Increment:

Y Axial Drive Inc.

(Resolution) 0.1!5 DCI (Scan Resolution) 0A 0 Scanning Speed: 2.0 inches per secondMode: Automatic Scan Conversion Units Inchecs Conversion Units Inches NumbeF of Scans: 46Scan Motion: Bi-dkectional

-Radius In. 15.52" Weld CIL: 71.74"Correction:

NIA N/ElevAontNozzle CNL: NNAMsterAcquisition File: DM S Pipe_ID_90_AWY 270eraD_Skew.acq Cnlibration Records-.

Examinetion Notes:Probe Channel /AnCie(s)

Skew Scan Offset Step Offset Pipe Diameterna 31r03'Probe I 1 .60-g8%)

900 + 70.34(in)

-1.29(in)

I 100D2 Circumferenoe

--97.48*Weld Cente1line

= 71.74Probe 2 2-(60-88) 270 + 59.64(in)

-2.79(in) 110002 RmProbe 3 3-(00Proffiometry) 00 + O.Do0inl)

-2.04(in)

I110002N/A N/A N/A N/A N/A NIAIncrement

& Scan Positons Actual Recordable Indications Annie!t RemarksScnN.() Increment Position SMa Position Yes No N/A

Attachment:

ScnNC) Sta Stop Starn Stop Channel I El S7 44 71.60 78,D5 0.00 50.10 Probe Chaonnel2 0 a] E] Q Yes NoChaninel 3 0- 0] El Further Evaluation Channel 1 r 0 Required:

Probe 2 Channel 2 R] F]Channel 3 Q 0 D 0 Yes D NoChannel 1 0 ay ID Archive MeadiaProbe 3 Channel 2 ] [.Channel 3 1:1 0][] External Hard DriveChannel 1 11 El []Probe 4 Channe 12 M] C] [ ] CD-ROMChannel 3 [ * -[]DVO-ROM Analyst SNT Level /111/30 APR 2014ISWT "ORM NJo. UTFD (Rev. III I

"))IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSithePlant:

V.C. SumnmerUnit Weld identification:

I-4100A-32 DM) Pro/RevICh CN: ISwT-PDI-AVTI1/20/1 Examination No.: ID-7Project No.: 13-1107 Weld Descriptloti Device Configuration:

136-00045 ModCona.t 138-00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Term raturt OFData Acquisition O2eator (s) /SPIT Level Carlos R. Ba-rbrinnflT 2g-Apt- 14 Ss rt E)nd Sta0rt EndSeae Controller Parameters Increment Axis Planned Actual Scan Ax00 Planned Actual Positional Parameters ControllerA SO-NExT Lower Limit 71.30 AN/ Lower Limit 48.47 4/.47 Beam Diretio:

Twd/AScan: X Rotator Drive Upper Limit 78.05 78.05 -Upper Limit 98.94 98.70 Probe Type; PA22-O01Increment:

Y Axial Drive Inc. Interval (Resolution) 0,1!5 DC] (Scan Resolution)

D.A0 Scanning Speed: 2.0 inches per secondMode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 46Scan Motion: Bi-direPional A Radius In. 15.52" Weld C/L: 71.74"Correction; NIA C/L, N/AMaster Acquisition File: DMPIpeID 90 AWY 270_TWDSkew.acq Calibration Records:

Examination Notes:Probe Channel/Anglees)

Skew Scan Offset Step Offset Pipe Diameter Dr31.03"Probe 1 ]-(60-88%)

90 + 70.34(in)

-P1.29(in) 10002 Circumfe oeM 97.48"Weld Centeline

= 71.74Probe 2 2-(60-88%L) 270 * + 59.64(in)

-2.79(in) 110002 E a i ai nR m r sProbe 3 3-(0-Pofilometry) 0° + 0.C(in) -2.04(in) 3 10002N/A N/A -N/A N/A NIA N/AIncrement

& guan Positions Actual Recordable Indications Aaalyst RemarksScan No.(s) Increment Position Scan Position Yes No NIA

Attachment:

Start stop Sta/ e Stop Channel 1 0 1" /D46 71.30 78.05 48.47 98.70 ProbeI Channel 2 0 [D 0 [] Yes M] NoChannel 3 0] 1"0 0 Further Evaluation Channel 1 11 0 0: [ Required:

Probe 2 Channel 2 13 2 n7 [Channel 3 0] 0] 10 Q Yes El NoChannel 1 0] 0 0] [ Archive Media:3 Channel 2 0] -0 [Channel 3 r- -] ") 07 External Hard DriveChannel I rl 0 EProbe 4 Channel 2 M] 0 0][ CD-ROMChannel 3 [ [D DVD-ROMJesse R. Delgado I II 130 APR 2014 -A {iswr rORM N.. trT9O (Res,. Iln)

,)IH I I1I SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDShc/Plant:

V.C. Sutemer Unit I Weld Identiflcatlon:

1-4100A-32 (DM) Pvi'Rev/Ch/JCN:

TSwT-PDI-AUTI 1/20/I Exainaion N.: ID-ProjectNo.:

1301107 Weld

Description:

SO-A"Ou4o0Z-S&(0`-125 Devie Cottflguration:

136-00045 Mod.Cant:

139-00102 Scan Path Drawing:

134-00121 Exam Date Eumination Time Surface TemreratureOF Data Acquisition Opmerator (s) I SN'T Level: Carlos H. Barberino/IT 29-Apr-14 Start End Sta rt End1526 161-0 so s0Sca conwoer P1 :%Increment Axis ln siRAJ Actual Rorae .an Axis PAnnned -Nswoal t Rm ar Ip detksController SG-NExT Lower Limit 71.30 ., 71.30 Lower Limit, 0.00 D.00 Beam Direction:

L'w/CowScan: X Rotator Drive Upper Limit 74.907.0 U,.jwr Limit 33.85 33.85 Probe Type: PA22-O01Increment:

Y Axisr Drive Inc. Interval (Resolution) 0,05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.5 inches per secondMode: Automatic Scan Conversion Units Inchles Conversion Units Inches Nurnber of SumBs: 71Seen Motion: Bi-dire-ctional Radius In- 1 5.52", Weld CtL: 71.74"Coffectioix N/A Plevation/Nozzle C/L; NIAMaster Acqubisiion File: DMPipe_ID 0 CW 180 CCWSkew.acq Calibration Records:

Examination Notes-Probe Channel/lAnrle(s)

Skew Scan Offset Step Offset Pipe Diaeet3 = 31.03"Probe I 1-(60-880L) 00 + 27.77(in)

-2.04(in) 110001 Circumference

=97.48"WeCd Centedan

= 71.74Probe 2 2-60-8L) 1W + 3 7.21(in)

-2.04(in) 110001 RemNIA N/A NIA NIA NIA N/ANIA N/A N/A N/A N/A NIAIncrement

& Scan Postflons Actual Recordable Indications Annilst RemarksScan ND.(S) Increment Position Scan Position Yes No N/A Anachment:

Start Stop Start Stop Channel I1" 0 ID 171 71.30 74,80 0.O0 33.85 Probe I Channel 2 0- El [ 0- Yes [] NoChannel 3 C3 C ] [] Further Evaluation Channel 1 0- 0"1 [ Required:

Probe 2 Channel 2 R1 n ] [Channel 3 0 ' S -1 Yes NoChannel I Q] [] [ Archive Media:Probe 3 Channel 2 Q] Q] EChannel 3 0 IDff [D External H&d DriveChannel I [ [IProbe 4 Channel 2 n] [ 17] [ CD-ROMAnalyst / SNT Level / Date:Jesse RL Delgado ( f 30 APR 2014 -_ AX19WT FORM No. VT 0 (RV,1IU!1)

)!IH I 1111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSite/Plant:

V.C. Summer Unit! Weld Identification:

1-4100A-32(DM)

Pro/Rev/ChwICN:

ISwT-PDI-AUTI/20/1I Examination No.: ID-9Project No.: 13-1107 WekI Descrption:

tiO'-2.*-

Device Configuration:

136-00045 Mod.Conf.:

138-00102 Scan Path Drawing:

134-00121

-Exam Date Examination Time Surface Temperature OFData Acquisition Operator (a)I SNT Level: Carlos H. Barberino/IT 28-Apr-14 Start End Start End1615 1659 o0 80.... ... ... ._ _ _ _ _ _ _Scan ControllerParametets Jncrement Axis Planned Actual Scan Axis Panned Actual Positionul Parameters Controller:

SG-NExT Lower Limit 71.30 71.35 Lower Limit 32.50 32.50 Beam Direction:

Cw/CcwScan: X Rotator Drive Upper Limit 74.80 74.85 Upper Limit 66.34 66.34 Probe Type: PA22-001

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.5 inches per secondMode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 71Scan Motion: i-directional Radius In. 15.52" Weld C/L: 71.74"Correction:

N/A _levation/Nozzle C/L: N/AMaster Acquisition File: DMPipejDO0_CW_180_CCWSkew.acq Calibration Records-Examination Notes:Probe Channel /Angle(s)

Skew Scan Offset Step Offset Pipe Diamemr -3 1.03"Probe I 1-(60-88-L) 0" + 27.77(in)

-2.04(in) 110001 Circumference

= 97.48"Weld Centerline

= 71.74Probe 2 2-(60-89-L) 1800 + 37.21(in)

-2.04(in) 110001 ExaminationRemarks-N/A N/A N/A N/A N/A N/AN/A N/A N/A N/A N/A N/A_______ _______ -...<Daft Auans'W s .,_ ncrement

& Sean Positions Actual Recordable Indications Analyst RemarksScan No.(s) Increment Position Scan Position Yes No N/A Attachment Start Stop Stan Stop Channell 0 G 0/_71 71.35 74.85 32.50 66.34 Probe I Channel 2 0 0 0' Yes El NoChannel 3 2 0 0 Further Evaluation Channel 1 0 0 Required:

Probe 2 Channel2

[7 M, 0Channel 3 [1 0 [D 0 Yes El NoChannel 1 05 0 U] Archive Media:Probe 3 Channel2

[2 El [ 0Channel 3 C0 0] D 0 External Hard DriveChannel ! 0 G1Probe 4 Channel 2 l 0 0 [3 CD-ROMChamibl 3 [] 0 2 DVD-ROMAnalyst/

SNT Level / Date: AISWTr FORM N. IrTT III1IV II" I.I IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSite/Plant:

V.C. Summer Unit I Weld ideatflcatlon:

1-4100A.32 (DM Pro/Rev/ChzqCN:

[SwT-PDI.AUTI 112J/0/l Examnation No.: ID-1Project No.: 13-1107 Weld

Description:

S-OWVo0t"bs t*b'.363)

Device Cofign ration: 136-00045 Mod.Conm.

138.00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Tem rature OFData Acquistion Operator (8) / SNT Level: Carlos H. BarberDnaeIT 28-Apr:-

4 Sturt End Start End1703 1748 80 soJesstRJeAgaItionI/1 "P....Scan Controler Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

SO-NEXT Lower Limit 71.30 71.30 Lower Lin-it 65.00 65.00 Beam Direction:

Cw/CcwScan: X Rotator Drive Upper Licnit 74.8D0 74.85 Upper Limit 98.94 98.84 Probe Type: PA272-00l Increment:

Y Axial Driv Inc. Interval 0.05 DCI (Scan Resolution)

D.05 Scanning Speed: 1.5 inches per secondMiode: Autoratic Scan Conversion Units Inches Conversion Units Inches Number of Scorns: 71lScan Motion: Bi-drectional Radius In. 15.52* Weld CIL: 71.74"Correction:

N/A -Ehavion/Nozzle CtL: NIAMaster Acquisition F~ile; IDMPipe ]D 0 _CW 18D Calibration Records-Examination Notes.Probe Channel /Anzle(s)

Skew Scan Offset Step Offet Pipe Diametr =31.03"Probe I 1=(60-980L)

V -+ 27.77(in)

-2.04(in)

I ID0001 Circumfrence--97.49' Weld Centerline

= 71.74Probe 2 2-(60-88

-L) 180 0 + 3 7 .2 1(in) .2,04(in) 110001 E a i ai n R m r BN/A N/A N/A N/A N/A N/A/AN/A N/A N/ANA N/AIncrement

& Scan Positions Actual Recoidable Indications Annilst RemarksSa os) Increment Position Scan Position Yes No 1N/A

Attachment:

SaN.() Stan T-stop Stan- Stop Chmmel I I- 72 71.30 74.85 65.00 98.94 Probe I Channel 2 0- C3[]~ Yes 27 NoChannel 3 [] 0] [ Further Evaluation ChannelI

] [] [] Rquirel"Probe 2 Channel 2 El [Chmel 3 0] GD 0 Yes [D NoChannel 1 0] 1I [ Archive Media;Probe 3 Channel 2 L1 07 [aChannel 3 D_, , 3 1p] External Hard DriveChannel I U: 0- ElProbe 4 Channel 2 D] [] [ [:1 CD-ROMChannel 3 El ElI' DVD-ROMAn" N Lve at:Juns R. Delgado I fit[ 30 APR 2014Ow~rl Urn O(nw. 1/ll)

N ).IIHI-IIHI SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CURRENT EXAMINATION RECORDSite/Planw:

VC SUMMER UNIT I Weld Identification:

I-4100A-DM) j , &4SI Pro/Rev/ChWJCN:

[SwT-AET-3/2/0 Examlnation No.: E'T-ID-06 Proect No.: 13-1107 Weld Descrlptlon:

IOutlet No -to-Safe End "A" Device Configration:

136-00045 Mod.Conf.:

138-00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Tern rature OCData Acquisition Operator (s) I SNT Level: 28-Apr-14 Start End Start EndWILLIAM ANGELL/ 11 1805 1847 70 70Data Acquisition Scan Controiler Parameters Increment Axis Planned A tual Stan Axis Planned Actual Positional Parameters Controller:

ANT Lower Limit 71.30 71.30 Lower Limit 0.00 0.00 Beam Direction:

N/AScan: X Upper Limit 78.05 78.05 Upper Limit 50.10 50.00 FT Probe Size: .38 (in)Increment:

Y Increment Interval 0.150 Resolution 0.020 Scanning Speed i.s ")SeCMode: Automatic Scan Conversion Counts 16000 Conversion Counts 558.54 Number of Scans: 46Scan Motion: Bi-dircctional Conversion Units Inches Conversion Units Inches Azimunth/NomleC/L 76.03*Correction:

N/A CIL N/AMSCdul) ParamSkwena Calibration Records:

Exam ination Notes:Status (lhaSnel(s)

Skew Scan Offset Step Offset Ppe diameter=

31.03"Probe I On 1-2 + 22.5* 5.35" -2.2 1" ET-03-VCS-01 Circumference

= 97.480Probe 2 On 3-4 -22.5 ° -5.35" -2,21" ET-03-VCS-01 W eld C /L- 76.03"Examination Remarks:Examination Remarks:Examination from 0 to 180*.Increment

& Scan Pouitioas Actual Recordable Indications AnalyI RernarkSean No.(s) Increment Position Scan Position Yes No N/A

Attachment:

start Stop Start Stop Probe I Channel 1 0 F 0 -l Yes 0 No46 71.30 78.05 0.00 50.00 Channel 2 0 2 D Further Evaluation Required:

Probe 2 Channel 3 [1 0 0Channel4 0 0l 1 -Yes [] NoProbe 3 Channel 5 0 E) [j] Archive Media:Channel 6 0 E 0 E 0 I External Hard DriveChannel 7 []0 0 0 CD-ROMProbe 4 Channel 8 0 0 0 DVD-ROMAnalyst / SNT Level / Date:WILLIAM ANGELL/ It/ -T /19Wr FRoM Me. ET IWO I Project No. 13-1107 EXAM ET-ID-06 Date: 28-April-2014 m-D wo *6 ýw sm D. Ow aUIWUBUSE-AimiSUP' I-iWl -h T(iTkuMi elE.4m.67 hi. s,I IHI SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CURRENT EXAMINATION RECORDSite/PIaat:

VC SUMMER UNIT I Weld Identflcation:

1-4100A-( I Pro/Rev/CbluVCN:

ISwT-AET-3/2/O0 Exanaion No.: ET-ID-07Project No.: 13-1107 Weld

Description:

jOutlet Noz.-to-Safe End "A" Device Conflgoration:

136-00045 Mod.Conf.:

13"-00102 Sea Path Drawing:

134-00121 Exam Date Exanminatlou Time Surfase Temperatare OCData Acqlutition Operator (s) / SNT Level: 2b-Apt-14 Start End Start EndWILLIAM ANGELL /11 1353 1935 70 70Data Acquisition Scan Controller Parameters lcrement Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

ANTr Lower Limit 71.30 71.30 Lower Limit 48.47 48.47 Beam Direction; N/AScan: X Upper Limit 78.05 78.05 Upper Limit 98.94 98.84 ET Probe Size: .38 (in)increment:

y Increment Interval 0.150 Resolution 0.020 Scanning Speed 13 *SECMode: Automatic Scan Conversion Counts 16000 Conversion Contls 559.54 Number of Scem: 46Scan Motion: Bi-directional Conversion Units Inches Conversion Units Inches: AyimnturNozzle C/L 76.03*Ca/mion:

NA __valow oule CIL NIAModule Parametera:

Calibration Records:

ExamInation Notes:Status Channel(a)

Skew Scan Offset Step Oflfte Pipe dimneter

-31.03"Probe 1 On 1-2 + 22.5* 5.35" -2.21" ET-03-VCS-01 Circumrence

= 97.480Probe 2 On 3-4 -22.50 -5.35" -2.22" ET-03-VCS-01 Weld C/L= 76.03"Examination Remarks:Examination Remarks:Examination from 180 to 36V".Increment

&Scan Positions Actual Recordable Indleations Analyst RemarksScan No.(s) Increment Position Scan Position Yes No NIA Attachment-S__n Start stop Start Stop Pre Channel I D [R 0 -Yes 0 No46 71.30 78.05 48,47 98.84 Channel 2 0 0) 0 Further Evaluation Required:

Probe 2 Channel 3 0 E 0Chanel 4 1 9 0 0 QYes O NoProbe 3 Channel 5 _ _ 0 e Archive Media:Channel 6 0 [0 2 0] Eernal Hiad DriveProe 4. Channel 7 0 0 0[ 0 CD-ROMChannel 8 0 [0 9 DVD-ROMAnalyst / SNT Level I Date:WILLIAM ANGELL I1 t/lswT Poem4 "k r lowU JProject No. 13-1107 EXAM ET-ID-07 Date: 28-April-2014

-ft~ em "* we ~ "Waf 14bm,,m L,,, u ,* Us... ._°" aDeTapalMmmX v lMJ21, I1 I IHI SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CU NT EXAMINATION RECORDSite/Plant 1 VC SUMMER UNIT I Weld Identification:

1-4100A-(DM) -57. A,14Iu Pro/Rev/Chg/ICN:

1SwT-AET.3f2J0

..Examination No.: ST-ID-OSProject No.: 13-1107 Weld joutle= Noz.4o-Saft End 'A* Device Coufliguration:

1316-00045 ModCoat.

138-0102 Scan Path Drawing:

134-00121 Exam Date Examintion Time Surface Temperature oCData Acquisition Operator (s) I SNT Level: 2-Apr4 Start End Start EndWILLIAM ANGELL / I1 21526 1 610 70 70Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

ANT Lower Limit 71.30 71.30 Lower Limit 0.00 0.00 Beam Direction:

N/AScan: X Upper Limit 74.80 74.80 Up pr Limit 33.85 33.85 ET Probe Size: .38 (inIncrement:

Y Increment Interval 0.050 Resolution 0.020 Scanning Speed I s "iSeMode: Automatic Scan Conversion Counts 16000 Convemsion Counts 559.54 Number of Scans: 71scanMotion:

Bi-directional Conversion Units Inches Conversion Units Inches nOWun14oze C/L 76.03'Correcion:

N/A _____________________

_________

__ _______CIL W44Module Parameters:

Calibration Records:

Examination Notes:Status Channd(s)

Skew Scan Offset Step Ofset Pipe diameter

-3__.03Probe I On 1-2 + 22.' 5.35" -2.21" ET-03-VCS-01 Circumference

-97.49'Probe 2 On 3-4 -22.5' -5.35' -2,21' ET-03-VCS-01 Weld CIL- 76.031Examlnatlon Remarla:______________Examination Remarks:__mianatinfrom 0 to 215W.inre-ment

& Scam Positions Actual Recordable lIdications Analyst RemarkbScan No.(s) ncrement Position Scan Position Yes No N/A Attchmnen.

Stn Stop Start Stop Prbe I Channell D 0 Ds _-_ _ _ Yes 0_ No_71 71.30 74.80 0.00 33.85 Channel 2 0 0 D Further F.valuation Required:

Probe 2 Chonne13 r-0 0.) 0_ Channel 4 0 0 01 0yes E) NoProbe 3 Channel 5 0 0 0" Archive Media:Channel 6 [ 0 0 E0 External Hard DriveProbe 4 Channel 0 0 0 0J CD-ROMChannelS 0 -0 DVD-ROM_Analyst / SNT Level / Dale:WILLIAM ANGELL /i IIMWr MAN T#& ZT IMSr

)Project No. 13-1107EXAM ET-ID-08Date: 28-April-2014 mil ftl I* 4*E14V* 42E (145£1TH4.,I&4.e *8i~9j~S~jL' I.~ -~ jh~W ~cpJ ....... .. pInnnnPn n w

.I111 SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CU NT EXAMINATION RECORDSitemmt.:

VC SUMMER UNIT I iWeld Identification:

1-4100A-MX(DMYM-L A.T41* PCO/RCev/CkC:

lSwT-AET-320 Examlnation No.: ET-ID-09Pro"ect No.: 13-4107 Weld

Description:

Outlet NWz.-o-Snfe Ed "A D Device Configuration:

136-00045 Mod.Coof.:

138-00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Temperature OCDaft Acquisition Operator (s) / SNT Level: 28A14 Start End Start EndWILLIAM ANGELL / -pr-4 1615 1659 70 70Data Acquisition Seta Controller Parameters Increment Axis Planned ctual Scan Axis Planned Actal Positional Parameters Contro~le.

ANT Lower Limit 71.30 7130 Lower Limit 32.50 32.50 ]Beam Direction:

N11Scan- X Uppr Limit 74.80 74.80 Upper Limit 66.34 1 66.34 ET Probe Size: .38 (inIncrement:

Y nc.mm ierval 0.050 Resolution 0.020 Scanning Speed 1.5 1'msMode: Aulmmnaic Scan Conversion Counts 16000 Conversion Counts 558.54 Number of Scans: 71Scan Motion: Bi-directional Conversion Units Inches Convecion Units Inches jmiraltINozue C/L 76.03'Correction:

NIA _ _evm__o_/oz__e CL NO_/_Module Parameters:

Calibration Records:

Examiaation Notes:Status Chamnel(s)

Skew Scan Offset Step Olfstt Pipe dienter -31.03"Probe I on 1-2 +22.50 5.35" -2.21" ET-03-VCS-O1

-97.48"Probe 2 On 3-4 -22.5' -5.35" -2.2 1 ET-03-VCS-01 Weld C/L- 76.03'Examination Remarks:Exarninaion Ratarb:Exanination from 120to 245'.IJcremunl

& Scan Positions Actual Recordable Indications Analyst Remarki;ScanNo.(s)

Incremnt Position Scan Position Yet No N/A AUchmernet

___Start Stop Start Stop Probe I Channell 0 .. Q1 0Yes 0 No71 71.30 "74.80 32.50 66.34 Channel 2 0 0 0 Further Evaluation Required:

Probe 2 Channel3 0- 2 0-Channel 4 0 0 07 D3[res E NoProbe 3 Channel 5 0 D 0 Archive Media:Channell 0 Q 0 (0 External Hard Drive _Probe 4 Channel 7 0 10 1 0 CD-ROMChannel 8 fl 0 2 DVD-ROMAnalyst / SNT Level /Datt:WILLIAM ANGELL/ III~5wT Foar me. gr it".Z Project No. 13-1107 EXAM ET-ID-9 Date: 28-Aprit-2014 tD MID Somas iW'S* 3 ý0404~4& P&iS _AI*h&tt

~- -__IIw

)TH I 1 1IM SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CURRNT EXAMINATION RECORDSite/ant:

VC SUMMER UHIT I Weld Identiflcatlon 1-44100A-

,,"DM)-J+,'Li hc. t4 NProtRev/C1gflCN:

ISWT-AET-3a/0 Examlnation No.: ET-ID-1IProject ND,.: 13-IJ107

......Wld Description-loulet Nmt4o-Sad'e End *A" [N:'l cc Confligr rdon,- 136-00045 Mod.Conr.:

13"00102 Sean Path Drawing; 134-00121 Jxam DNte Examination Time Surface Temperatare CcData Acquisition Operator

($) I SNT Level: Start End stna EndWILLIAM ANGELL /Il 21-Ap-14 1703 1748 70 70Data Acqusition Scan Controller Parameters Increment Axis Planned Actual Stan Axis Planned Actual Positional Parameters Controller:

ANT Lower Limit 71.30 71.30 Lower Limit 65.00 65.00 Buam Direction:

NWAScan: X Up Limit 74.80 74.80 Uppcr Limit 98.94 98.84 ET Probe Size: 39 (inIncrtment:

Y Increment Interval 0.050 Resolumion 0.020 Scanning Speed I, "/SECMode: Automatic Scan Conversion Counts 16000 Conversion Counts 558.54 Number of Scans: 71Scan Motion: Bi-directional Conversion Units Inches Conversion Units Inches AzimunlWNoule CVl, 76.03'COrrection:

N/A _levasiow*lzue V1 WAModule Parameters:

Calibration Records:

Euxmt.. non Noter.Status Channel(s)

Skew Scan Offset Step Offset Pipe diameter

= 31.03"Probe I On 1-2 + 22.5" 5.35" -2.21' ET-03-VCS-01 Cireumference-97.4r" Probe 2 On 3-4 -22,5' -.-2.2 V ET-03-VCS-0I Weld C/L- 76.03"Euminatlon Remarks:_Examination Remarks:I Exanmiation from 240 to 365".incremaet

& Scan Positions Actual Recordable Indications Analyst RemarksScan lo.(s) Increment Position Scan Position Yes No NIA Attachment-Strat Stop Start Stop Prob I Channel 1 01 [a 0 R Yes 0 7 No71 71.30 74.80 65.00 98.84 Channel 2 0 0B 0 Further (aluation Required:

Probe 2 Channel 3 0 U 0 __Channel 4 0 (a 01 Oes 1 NoProbe 3 Channel 5 [ Q 0 Archive Media:Channel8 0 0 0 021 External Hard DriveProbe 4 Channel7 0 [] 0 C] CD-ROMChannel 8 0 I 9 DVD-ROMAnalyst I SNT Level / Date;WILLIAM ANGELL/ IIII5W? FOAM Ný er Mau

)Project No. 13-1107 EXAM ET-ID-10 Date: 28-Apnil-2014 I:,Wnn, *#

N S o...-ET41E T'1O" 97 i-Lf, l-miv(T... .. .i ... ...*; ; ::

IHI IH1 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSite/Plant:

V.C. SumnArUniti IWeld Identification:

1-4200A-28 (DM) ProtRev/ChR/ICN:

ISwT-PDI.AUT I 1/2/0I Examinatin No.: ID- IlProject No.: 13-1107 Weld

Description:

S.08" In No-t0-SP (0o-183*s Device Conflguration:

136-00045 Mod.Conf.:

138-00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Temperature OFDate Acquisition Operator (s)/SNT Level: Rihard A. Riddkw III 27-Apr-14 Start End Start End2115 2150 1 80 80Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller SO-NExT Lower Limit 71.30 71.52 Lower Limit 0.00 0.00 Beam Direction:

Twd/AwyScan: X Rotator Drive Upper Limit 78.05 78.02 Upper Limit 50.10 5 $0.03 Probe Typo: PA22-001Increment:

Y Axial Drive Inc. Interval (Resolution) 0.15 DC1 (Scan Resolution) 0.10 Scanning Speed: 2.0 inchcs per secondMode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 46Scan Motion: Bi-directiomal Radius In. 15.52" Weld CA,: 71.74"Correction:

NIA I _ JevalionNozzle CIL: N/AMister Acquisition File: DMPipeD 90_AWY_270_TWDSkew.acq Calibration Record: Examination Notes:Probe Channel /Angue(s)

Skew Scan Offset Step Offset Pipe Diameter

= 31 .03"Probe 1 I-(60-88-L) 90W + 70.34(in)

-1.29(in) 110002 Circumference

= 97.48"Weld Centerline

= 71.74Probe 2 2-(60-88-L) 270" + 59.64(in)

-- 2179(in) 110002Examination Remarks:Probe3 3-(OProfilometry) 00 4 0.00(in)

-2.04(in) 110002N/A N/A N/A N/A NIA N/AIncrement

& Scan Positions Actual Recordable Indications Anal'st RemarksScan No(s) Increment Position Scan Position Yes No N/A Anachmnent:

Stani I Stop Start Stop Channel I 0 ED El45 71.52 78.02 0.00 50.03 Probe I Channel 2 0 G D 0 Yes [D NoChannel 3 13 0 0 Further Evaluation Channel I Q 0 01 Required:.

Probe 2 ChanelI2 Fl e El_Channel 3 Q 0 02) 0 Yes El NoChanmel 1 0 0 B Archive Media:Probe 3 Channel?

[] 0 EDChannel 3 ] 0 0 [ External Hard DriveChannel I [I3 S]Probe 4 Channel 2 17 0 0 CD-ROMChannel 3 C ] DVD-ROMAnalyst I SNT Level / Date: Jesse R Delgado I IlI 3 APR 2014ISW" FORM No. Ltrrs (Rev. IIll)

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSite/Plant:

V.C, Summer Unit I Weld Identification:

1-4200A-28 (DM) Pro1Rev/Chje/CN:

ISwT-PDI-AUTI 1/2/0/1 Examination No: ID-12Project No.- 13-1107 Weld

Description:

scOB"inx l o-se (ISO .365-) Device Confitguration:

13"00045Md.CCoaf.:

13"10002 IScan Path Drawing:

134-00121 Exam Date Examination Time Surface Temperature OFData Acquisition Operator (s) / SNT Level Richard A. Riddles!

III 27-ApT-14 St start End+200 2239 80 , 80--Dai*Ac "Uiktefni Stan CintrtotUa Parsnreten Increment Axis Planned AedaT Kan Axis Planned Actual ositiodnal PPm emtersController.

SO-NExT Lower Limit 71.30 71.57 Lower Limit 48.47 48.47 Beam Directon:

Twd/AwyScan: X Rotator Drive Upper Limit 78.05 78.05 Upper Limit 98.84 98.84 Probe Type: PA22-O01Inntment, YAxial Drive Inc. Interval (Resolution) 0.15 DCI (Scan Resolution) 0.10 Scanning Speed: 2.0 inches per secondMode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 46Scan Motion: Bi-directional Radius In. }5.52" Weld C/L: 71.74"Correction:

NIA _EicvationfNo'zale C/L: N/AMasterAcquLsition File: DM Pipej D 90 AWY 270TWD_.Skew.acq Calibration Records:

Examination Notes:Probe Channel /Angle(s)

Skew Scan Offset Step Offset _Pipe Diameter=

31.03*Probe I 1-(60-8rL) 9( + 70.34(in)

-1.29(in) 110002 Circumference

= 97.48"Weld Centerline

= 71.74Probe 2 2-(60-88'L) 2700 + 59.64(in)

-2.79(in) 110002 Examination Remarks:Probe 3 3-(0'Profilom~ety) 00 + 0.00(in)

-2.04(in) 110002N/A NfA N/A N/A N/A N/A&. Sca ... Dm -o, --ysi ,- ..Incremmn

& Scan Positions Actual Recordable Indications Analyst RemarksScan No.(s) lncrement Position Scan Position Yes No N/A

Attachment:

Stagt Stop Sta Stop Channell 0 0 1144 71.57 78.05 48.47 98.84 Probe I Charnel 2 0 D ] 00 Yes [D NoChannel 3 ] 0 0 Further Evaluation Channel1 0 E0 I equired:Probe 2 Channel 2 E] 07 [71Channel 3 0 0 0 ] Yes 0 NoChannel 1 0 0 0 Archive Media:Probe 3 Channel 2 C1 .0Channel 3 C] 0 0 [0 External i-Hard Drive__ __ __ _ __ __ _ __ __ _Channel 1 0 0 IDProbe 4 Channel 2, 1 n 0 0 CD-ROMChannel 3 C] E 0 DVD-ROMI SNT Level / Date: Jesse IL Delgado 111 30 APR 2014 .--A" FORM No. )Trs (Kr'. 111i)

)IHI IHI SOUTHWEST TECHNOLOGIES

.oI .--. -- " AUTOMATED ULTRASONIC EXAMINATION RECORDSitel/Phat; V.C. Summer Unitl Weld Identification:

14200A-28 (DM) ProiRev/Chg/IlCN:

ISw'T-PDI-AUTI IVn l Examination No.: ID-13Project No.: 13-1107 Wed Descptlion:

SG"B-InN.,oO-Sz (o-i22 Device Conf'lurstlon' 136-00045 Mod.Conf.:

T38-00102 Scan Path Drawinl:

134-00121 Exam Date Examination Time Surface Tem eratureOF Data Acquisition Operator (s) /SNT Level: Richar A. Riddles/III 28-Apr-14 Start End Start End0046 0135 80 804, unFto ivUA__IEi

... ..., ..--.Scan Cnatroller Parameters Increment Axls Planned Actital Scan Axis Planned Actual Positional Parameters Controlle':

SO-NExT Lower Limit 71.30 71.32 Lower Limit 0.00 0.00 Beam Direction:

Cw/CcwScan: X Rotator Drive Uper Limit 74.80 74.80 Upper Limit 33.85 33.85 Probe Type: PA22-001hienc'rena Y Axial Drive Inc. lntcrval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.5 inches per sveondMode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 71Scan Motion: Bi-directional Radius In, 15.52" Weld C/L: 71.74"Correction:

N/A _ I Ellevation/Nczzle CIL: N/AMaster Acquisition File: DMjPipe lD30,CW_180_CCW_Skew.acq Calibration Revords:

Examination Notes:Probe Channel/Angle(s)

Skew Scan Offset Step Offet Pipe Diameter 31 03"Probe I I(60-880L) 00 + 27.77(n)

-2.04(in) 110001 Circumference=

97.48'Weld Centerline

= 71.74Probe 2 2-(60-88-L)

)801 + 37.21(in)

-2.04(in).

110001 Examination Remarks:N/A N/A N/A N/A N/A N/AN/A N/A NIA N/A N/A N/A' ' ~~~~~~~~~~

~ ~ ~~.... ':i:.-:-..

..........................

' =

.... "': .." ..Increment

& Scan Positions Actual "ecord babe Wnia lo w AnIIl sol Remark.Increment Position Scan Position Yes No N/A

Attachment:

Sn No.(s) Start Stop Stan Stop Channel 0 Q el __69 71.32 74.80 0.00 33,85 Probe I Channel 2 0 B 0 0 Yes 2 NoChannel 3 0 1 1 Further Evaluation

.. Channel 1 0 0 LI Required:

Probe 2 Channel 2 n -[7Channel3 0 Q El 0 Yes a NoChannel I 0 0 ED Archive Media:Probe 3 Channel 2 E3 a] _ _Channel 3 G a] [ 0 Externa)

Hard DriveChannel 1 0 0DProbe 4 ChannelZ nl El I 0 CD-ROMI Channel 3 Q 3 0 [F DVD-ROMAnalyst / SNT Level I Date. Jess R. Delgado, 1DI 30 APR 2014 ..4 t#I&M No. ULT 50 (we. 111)

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSitriPlant:

V.C SummerUnil I Weld Identifkiatlon:

1-4200A-28 (DM) Pro/Rev/Chy/ICN:

ISwT-PDI-AIITI I/2/0/ Examinatlon No.: ID-!4Protect No.- 13-1107 Weld

Description:

SO" InNwzvto-Si 12V.24S$)

Device Configuration:

136.00045 Mod.Conf.r 138-00102 Scan Path Drawing:

134-D0121 Exam Date Examination Time Surface Temperature OFData Acquisition Operator (s) /SNT Level: Richard A. Riddles/

III 28-Apr-14 Start End Start End0145 0245. .0 80San cr n & ScParameters P ou-Aement Axis Planned Aclte Scan Axi Piano Actual Ptsetional Parameter&

Controller.

SO-N&xT L.ower Limit 71.30 71,32 Lower Limit 32.50 32.50 Be=' Directon:

C'w/CcwSCan: X Rotator Drive Upper Limit 74.80 74,80 Upper Limit 66.34 66.34 Probe Type: PA22-001Increment:

Y Axial Drive Inc IntervSa (Resolution) 0.05 DO (Scan Resolution) 0.05 Ncanning Speed: 1.5 inches per secondMode: Automatic Scan Conversion Units Inches Conversion Units Inches N)umber of Scans: 71Scan Motion: Bi-drectonal Radius In. 15.52" Weld C/L: 71.74"Correwcion:

N/A 'E~vation/Nozzle CIL.: NIAMaster Acquisition File: DMPipe_ID 0-CW-180 CCWSkcw.acq Calffratlon Records:

Examination Notes:Probe Channel/Anle(s)

Skew Scan Ofset Stbp Offset Pipe Diame3ern 31.03"Probe I 1-(60-8-L) 0 C 27.77(in)

-a2.04(in) 110001 Circumference r97.48"Weld CeCeteine

= 71.74Probe 2 2-(60-880L) 1e0* + 37.21(in)

Cn 2.0400) 110001 Examination Remarks:NIA NIA N/A NIA N/A N/AN/A N/A N/A NtA NIA N/AIncerment

& Semi) Positions Actual Recordlable Indications Analyst Remar~ksSu o() Increment Position Scan Position yes No N/A Attacmen~t:

SSan Stop Start stop Channel 3 13 0 [CV-O71 71.32 74.80 0145 D245 probe I Channtel 2 [3 El 0" 0" Yes NoChannel 3 11 E- e] Further Evaluation Channel I ES DL D Required:

Probe 2 Channel 2- i 0 3"0 AP 0.Channel 3 Q o] (] y.es 1 NChanne 1 0 0 [ a[ Archive Media:Probe 3 Channel 2 El 11 [Channel 3 1 11 [] (D External Hard DriveChannel I Q] Q IDprobe 4 Channel 2 rl" ] 9] 0" CD-ROMrChannel 3 [1 0] G1 DVV-ROMAnalyst/

SNT Level I Date -J esse R. Delgado /ITT 30 APR 2014 _._ IsyWT FORM~o Xf'l U- s (111. [III)

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSite/Plant:

V.C. Summern Unit I Weld Identification.

1-4200A-2 (DM) Pro/RevICh/ICN:

ISwT-PDI-AIJTI 1/2/0/I Examination No.: ID-15Project No., 13-1107 Weld Descri tion: SO "B" In N.z-.toSE 240'-36s5° Device Confl uration:

136-00045 Mod.Conf.:

138-00102 Scan Path Drawing:

134-001il Exam Date Examination Time Surface Temperture 0FDeata Acquisition Operator (s) /SNT Level: Richard A. Riddles / I I I 28-Apr-I 4 Start End Start End0247 0333 so (0Scan Controller Parameters Increment Axis Planned Actual Scan Axs Planne Actual Positional Parameters Controller:

SO-NExT Lower Limit 71.30 71.30 Lower Limit 65.00!! 65.00 Beam Direction:

Cw/CcwScan: X Rotator Drive iUpWe Limit 74.90 74-.80 Upper Limit 98.84 1 98.84 Probe Type: PA22-001Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.S inches per secondMode: Automatic Scan Conversion Units i~nches Conversion Units Inches Number of Scans: 71Sewn Motion: Bi-diroctionel Radius In. l 5.52" Weld C/L; 71.74"correction:

N/A NA/eANAion/Nozzl.

C/L N/AMisfterAcquisition File: DM PipejlD 0 CW_180 CCW Skew.acq Calibration Records; Examination Notes.Probe Chan nel/A ngle(s) Skew Scan Offset Step Offset Pipe Diamnete 31.03"Probe I ! -(6-88°L) 00 + 27.77(in)

-2.04(in) 1 10001 Circumference

.97.48"Weld Centerline

=f 71.74Probe 2 2-(60-88°L)

I SD* 4 37.21 (in) -2.04(in)

I I ODD] Examination Remarks:NIA N/A N/A N/A N/A N/AN/A NIA N/A N/A N/A N/AIncrement

& Scan Positions Actual Recordable tndications Analst RemarksIncrement Position Scan Position Yes No NIA

Attachment:

SaNoi) Stan stop Star stop Channel I1" 0 -M71 71.30 74.80 65.00 98.84 Probe I Channel 2 [] .1 El.[] Yes E) NoChannel 3 -. E " Furthe Evaludtion Channel 1 0 Q Required:

Probe 2 Channel 2 17CD-ROMChannelJ3

[] 0 ID 0Yes E) NoChannel 1 [] 2 Archive Media:Probe 3 ChannelJ 2 Q7 E)Channel 3 C. I-' EDI External Hard DriveChannel 1 0] 0] PProbe 4 Channel 2 n C} [ CD-ROMChannel 3 ) 0 DVD-ROMAnalyst / SNT Level / Date: Jesse R. Delgado /11 30 APR 2014UWT FORMI No UT5 (Rev. W13)

IRI SOUTHWEST TECHNOLOGIES AUTOMATED EDDY CURRENT EXAMINATION RECORDSite/P lant ., VC SUM M ER UN IT l W eld Identifica flon A x "' A -A'(D M ) 1 -4 = -2 %r ProfR ev/C h w/IC N : ISw T-A ST-3/2/0

' x m n t o o :E --Project No.: 13-1107 Weld

Description:

lnlet Noz._-o-Safc End *B" Device Conalluratlon:

136-00045 EMod:Conf.:

138-00102 jSan Path Drawing:

134-00121 Exam Date I Examination Time Surface Tern eratre 0CData Acquisition Operator (9) I SNT Level: Start End Start EndKARL SCHAFFER

/ 111 27-Apr- 2115 2150 68 68Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameterm Controller:

ANT Lowcr Limit 71.30 71.30 Lower Limb 0.00 0.00 Beam Direction:

N/AScan: X Upper Limit 78.05 78.05 Uppcr Limit 33.85 33.85 ET Probe Size: .38 (in'Increment:

Y Increment Interval 0.150 Resolution 0.020 Scanning Speed 1.5 "/SEeMode: Automatic Scan Conversion Counts 16000 Conversion Counts 558.54 Number of Scans: 46Scan Motion: Bi-directional Conversion Units Inches Convetion Units Inches Aimunth/Noel CI. 76.03'Corrcction:

N/A "j ,rionr/Nulee C/L N/AModule Parameters:_

Calibration Records:

Examination Notes:Status Channel(s)

Skew Scan Offset Stlp Offset Pipe diameter

= 31.03"Probe I On 1-2 +22.5* 5.3." -2.21" *ET-03-VCS-01 Circumference

= 97.48"Probe 2 On 3-4 -22.50 -5.35" -2.21" ET-03-VCS-01 Weld C/L= 76.03"Examination Remarks:Examination Remarks:Examination from 0 to Ig00oIncrement

& Saan Positions Actual Recordable Indications "Analyst RemarksScan No.(s) Incement Position Scan Position Yes No N/A

Attachment:

_Start Stop Start Stop- Pobe I Channell 0 0 O]es 0 No46 71.30 78.05 0.00 33.85 -Channel 2 0 0 0 Further Evaluation Required:

Probe2 ChanneJ3 0 0 0] [Channel4 0D 0 0 QYes 0 NoProb3 Channel5 D 0 [0) Aechive Media:Channel6 0 0 1-1 External Hard DriveProbe 4 Chmnnel 7 0 0 ) E [ CD-ROMChannel 8 C) 0 0 DVD-ROMAnalyst / SNT L~evel / Dale:WILLIAM ANGELL / 11 /4ZLSrFORKM ft, lrT lO./

Project No. 13-1107 EXAM ET-ID-1 1 Date: 28-April-2014 WW flitlil I" o m!A." ,

• __I~ *a*'.*Le .fA- IU406"s

)111H SOUTHWEST TECHNOLOGIES AUTOMAT EDDY CURRENT EXAMINATION RECORDqatJlllant:

VC SUMMER UNIT I Weld

--(DM) %-47A0A--.

Pro/Rev/CMICN:

lSwT-AET-312/0 Examnaton No.- ET-ID-12Projcet No.: 13-1107 Weld

Description:

Inlit No0.4o-Safe End '"B Devle Coufnguraflon:

136-00045 Maod.Conf.:

38-00102 SCaN Path DrawinL:

134-00121 Exam Date Examination Time Surface TemperSture CData Acqluitlom Operator (s)/SNT Level: 27oAI-I4 Start220 End Start EndKARL SCHFFER/

1112-A~rI 2200 2239 68 68Data Acquisition Scan Controller Parameters Increment Axis Planned Aetal Scan Axis Planned Actual Parameters ntroller ANT Lower Limit 71.30 71.30 Lower Limi 45.47 5.47 Beam Direction:

N/1Sum: X Upper Limit 78.05 78.05 Upper Limit 98.84 98.64 ET Probe Size: .38 (inIncne nt: Y Increment Interval 0.150 Resoluton 0.020 SScanning Speed is/3BMode: Automatic Scan Counts 16000 Conversion Counts 558.54 Number of Scans: 46Scan Motion: Bi-directional Conversion Units Inches Conversion Units inches Aztmunlh/Norzle C/L 76.03'Corrction:

N/A JElevati"onoNOae C/L. NOlModule Parameters:

Calibration Records:

Examinlaton Notes:Status Channel()

Skew Sea Offset Step Oft__ Pipe diamter -31.03Probe I On 1-2 + 22.5" 5.35" -2'11 ET-03-VCS-01 Cirunufmtbnce

-97.490Probe 2 On 3-4 -_22_S_ -5.35" -2.21" ET-03-VCS-01 Weld CL- 76.030_xAminadion Remarks:Exanination Remarks:Examination from 180 t Me0,........

iacremunt

& sa. PosJwtio Actual Recordable Indlcations Analyst RemarksScan .(s) I t Position Scan Position Yes No N/A Attachunenv

__an Start Stop Stin Slop Channell 0 a] 0 "'es 0 No46 71.30 78.05 45.47 98,84 Channel 2 0 0 0- Further Evaluation Requirod:

Pobc2 Channel3 0 ( 1DCharne4i 0 01 0 OEres 01 NoProbe 3 Channel 5 0 0 (a Archive Media:.Channel 6 0 0 0 0 External Herd DriveChannel?7

-0 0 CD-ROM__Channel 8 0 I 0 DVD-ROMWILLIAM ANGELL/ II1Iswr VoaM NO, Irr own 1Project No. 13-1107 EXAM ET-10-12 Date: 28-April-2014 jumod**'

.~P9UV:4i F=llwnI t e b! = b-,L -....1: )t.14411v.

[f IHI SOUTHWEST TECHNOLOGIES AUTOMA'ED EDDY CURRENT EXAMINATION RECORDSite/Plaint

-VC SUMMER~ urrr 1 IWekld Iestftfestlom 1j-4 am.3a (DM) J -t a'tq-2S(

Pro/RWvCbuJICN:

ISWT-AET-3/2M0~la o: I-DIProject No.: 13- 1107 Weld

Description:

-Iniet NoL-to-Ssfe End "B" Device Configuration:

136-00045 nMod.Cotf.:

138-00102

.Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Temperature OCData Acquisition Operator (a) / SNT Level: Start End Start EndKARL SCHAFFER]

ITT 28-Apr-14 0046 9135 68 65Data Acquisition Scam Controller Parameters Increment Axis Planued Actual San Axis Planned Actual Positional Parameters Controller ANT Lower Limit 71.30 .71.30 Lower Limit 0.00 0.00 Beam Diredion:

NI,Scan: X Upper Limit 74.80 7480 -Upper Limit 33.35 33.85 JET Probe Size. .38 (irIncremenr Y Increment Interval 0.050 Resolution 0.020 Scanning Speed ILs "/SEMode: Automatic Scan Comvctsion Counts 16000 Conversion Cotas 558.54 Nwmrbv of Scars: 71Scan Motion: si-dircctional Conversion Units Inches Conversion Units Inches IAzmunsWNoWe C/L 76.03Correction:

N/A ElevutionNozzle C/L NI,Module Parameters:

Calibration Records:

Examluation Notes:Status Cbaonetj(S)

Skew Sean Offset Step Offset Pipe diameter

-31.03"Probe IOon 1-2 +22.5" 5.36" -2.21" ET-03-VCS-01 Circumference 97.48Probe 2 On 3-4 -22,5" -5.35" -2.21" ET-03-VCS-01 Weld CIL- 76.03"Examination Remarks:Examination Remarks:Examination from 0 to 125".lunrement

& Scan Positions Actual Recordable indications

"_AnalystRemarks Scan No.(s) increment Position Scan Position Yes No NIA

Attachment:

Stan Stop Stan Stop Probe I Channel 1 0 1 0 Or'es 0 No71 71.30 74.30 0.00 33.5 Channel 2 0 a) 0 Flher Evaluation Required:

Probe 2 Channel 3 0 0[]_ Channel4 0 121 03 GNo,,Probe3 Channel5 03 0 1] ArchiveMedia:

Channel 6 0 0 [ a External Hard DriveProbe 4 Channell 0 0 0 03 CD-ROMChanneIB 0 -[ 0 DVD-ROMAnalyst / SIVT Level / Date:WILLIAM ANGELL/ I[ IISVVTIFOQM ft rr 1001t-Project No. 13-1107 EXAM ET-ID-13 Date: 28-April-2014

-ii _ .! .iET1-10jIun1tufe4mM.Iý rodX 4WASI k N)I1 1SOUTHWEST TECHNOLOGIES AUTOMA ID EDDY CURRENT EXAMINATION RECORDSttePlantt VC SUMMER UNIT I 1Wted identiflcatlo:n-A 441We9 (DM) I-92?Cn-r

& Pro/R/CbCJWICN:

ISwT-AET-3/2/0 Exaination No.: ET-ID-14P roject No.: 13-1107 [W eld DesJcriptin:

frkk3 N or-to-Saft End *B" Devict Confl prefimn:

136-00045E a in io , T-D 4Mod.Conf,:

133-00102 Scan Path Drawin 134-00121

&xaM Dale Examination Time SurfaceTemrpehalre OCData Acquisition Operator (s) / SNT Level: 2-Apt-14 Start End Start EndKARL SCHAFFER/

111 0145 1 0245 _.68 68Data Acquistion_

Scan Controller Parameters increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

ANT Lower Limit 71.30 71.30 Lower Limit 32.50 32.50 Beam Direction:

N11Scan: X Upper Limit 74.80 74.80 Upper Limit 66.34 66.34 ET Probe Size: .38 (inIncremeit:

Y Increment Interval 0.050 Resolution 0.020 Scanning Speed 1.5 "SBLMode: Automatic Scan Conversion Counts 16000 Conversion Counts 558.54 Number ofScans:

71Scan Motion: Bi-directional Conversion Units Inches Conversion Units Inches Jdmunth/Nozle C/L 76.03Correction:

N/A J v____ _ CIL N11Module Parameters:

Calibration Records:

Examination Notes:Status Channelua Skew Scan Offset Step Offset Pipe diameter

-31.03"Probe I On 1-2 + 22.5? 5.35" -2.2 1 *ET-03-VCS-0I Circurnf'broe

-97.48'Probe 2 n 3-4 -5,2 -5,35 -2.21' ET-03-VCS-01 Weld C(L- 76.03"Examliation Remarks:Examination Rernaks:Examination from 120 to 744*"Icremeat

& Scan Posiuto Aalcl ....ebale Indications Analyst RemarksSw N.(s) Incrcmeat Position Scan Position Yes No WA

Attachment:

S_ __ Start Slp. Start Stop Probe I Channell D Q 0 OYes 0 No71 71.30 74.80 32.50 66.34 -Channel 2 0 0 0 Further Evaluation Required:

Probe 2 Channel3 0 F0 0I-Channel 4 0 0] 01 ['es 1NoProbe 3 Channel 5 0 0 E0 Archive Media:Channel 6 0 0 0 0] Extlernl Hard DriveProbe 4 Channol 7 0 0 2 D CD-ROMAnlh ChannelS 0 0 DVD-RO/_D Analyst / SNT Level / Date:WIST HLL .xrIA M ANGLL IITomA r lo'00 I EXAM ET-ID-i'14 Project No. 13-1107Date: 28-April-2014

)1111 SOUTHWEST TECHNOLOGIES

..... ~,, ............

AUTOMA..

EDDY CURRENT EXAMINATION RECORDSite/Plant

VC SUMMER UNIT I jWeld Ideatlinea 1o , ,44DM) 1-t00=A(D4'Z

.¶ lSwT-AET-3/2/0 Examinatio No.: ST-1D45Pro ect No.: 13-1107 !Weld Descrlption:

Inlet Noz--.o-Safe End "B" Device Configtradow:

136-00045 MadCooL:

13"-0102 IScan Path.Drawint:

134-00121 Exam Date Examination Time Surface Temperature OCData Acquislion Operator (s) / SW Level: 28-A -14 Start Ead Start EndKARL SCHAFFEW i1l 0247 0334 68 68Data Acquisition Scen Controller Parameters Increment Axis Planned Actual Scan Asia Planned Actual Positional Parameters Conoroller:

ANT Lower Limit 71.30 71.30 Lower Limit 65.00 65.00 Beam DNvction:

Scan: X Upper Limit 74.80 74.80 Upper Limit 93.84 98.94 ET Probe Size: 38 (inIncrement:

Y Iincrement inurval 0.050 Resolution 0.020 Scaning Speed IS "*SEMode; Automatic Scan Conversion Counts 16000 Conversion Counts 558.54 Number of Scans: 11Scan Motion: Bi-directionsl Conversion Units Inches Conversion Units Inches Azmunih/Nomzje CIL 76.03'Correction:

N/A _ _ _ _ evation44ozzle C/L N/AModule Parameters:

Calibration Records:

Examinatlon Notes:Status Channel(s)

Skew Scan Offset Step Offset Pipe diameter

-=31.03"Probe I On 1-2 +22.5" 5.35^ -2.21" ET-03-VCS-01 Circumference

-97.48"Probe 2 On 3-4 -22.5- 5.35" -2.21" ET-03-VCS-01 Weld C/L- 76.03"Examination Remarks:Examination Remarks:Examination from 240 to 365".[ _ Increment

&Sean Positions Actual Recordable Indications Analst RemarksScan No.(s) Increment Position Scan Position Yes No N/A Attachmont:

Start Stop Stan Stop probe I Channell 0 3 0 2 Yes Q No71 71.30 74.80 65.00 98.84 -Channel 2 0 0 0 Further Evaluation Required:

prbe2 Channel 3 0 E) 0Channel4 0 0 0 Ey'es 0/oNOProbe 3 Channel 5 0 D ED Archive MediaChannel 6 0 0 M E External Had DriveProbe 4 Channel 7 0 0 E) 0 CD-ROMChannel8 0 [D 9 DVD-ROMAnalyst I SNT Level / Date:WILLIAM ANGELL/ II/ST FOaMW Ir~r 10M Project No. 13-1107EXAM ET-I D-15Date: 28-April-2014

. B" SG OutEaind'atloan heat No's.*]SwT-12D1-AUTI 111/MiISWT-MD-AUTI 1121011I~wT-PDI-AUT1lI2R3I kVT43DI-AET~2/

ISwT43DI-AET3J2/=i UTPffhq 1 M0O-Or)UT PAobe 2 t60-8)UFT P.b i (r848jUTr Pmba 2 CG0-881ET PITW 1Er PmoW 2110002110002110001110001FM3-VC&MET'r0Vcs-01 UT TWO & AWY Exm,UT CW & CCW ExamUT CW & CCW ExamEddy CQmnt ExamEddy Cuernt ExamSummnary-This weld was examined from the inside surface using SG-NExT, T-111. & MS5800 examirnation equipment.

The examination was limited due to the proxdmity of the nozzle taper. The examination coverage was 92%.No recordable indiations were detected during this examination.

IH I -"11 SOUTHWEST TECHNOLOGIES

-"- --c AUTOMATED ULTRASONIC EXAMINATION RECORDSite/PlaRt:

V.C. Summer Unit I Weld Identification:

1-4200A-29 (DM) Pro/Rev/Chg/fCN:

ISwT-PDI-AUT1 It/d0/aProject No.: )3-1107 Weld Dtscription:

so",B" om Naz4o-9fi(o'-igs,)

Device Confliguration:

036-00045 EaiainN.

D RMod.Conf.:

138-00102 Scan Path Drawing.

134-00121 Exam Date Examination Time Surface TemperatureOF Data Acquisition Operator (a) / SNT Level: Carlos IL BarberinoT

.T 27-Apr-14 Start End Start End1402 1505 80 80Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:

SO-NExT Lower Limit 71.30 71.75 Lower Limit 0.00 0.00 Bearn Direction:

Twd/AwyScan: X Rolator Drive Upper Limit 78.05 78.05 Upper Limit 50.10 50.03 Probe Type: PA22-001Increment:

Y Axial Drive Inc. Interval (Resolution) 0.15 DCI (Scan Resolution)

,0.10 Scanning Speed: 2.0 inches per secondMode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scam: 46Scan Motion: Bi-directional Radius In. 15.52" Weld C/L: 71.74"Correction:

N/A ___levalion/Nozzle CIL: N/AMaster Acquiition File: DM.Pipe ID_90 AWY_270_TWDSkew.acq Calibration Records:

Euxalnation Notes:Probe Channel tAngle s) Skew Scan Offset Step Offset Pipe Diameter

= 31.03"Probe I ]-(60-88-L) 90V + 70.34(in)

-1,29(in) 110002 Cirowference 97.48"Weld Centerline

-71.74Probe 2 2-(60-98-L) 270* + 59.64(in)

-2.79(in) 110002_______________

______ ____________

_______________

______________Examination Remarks:Probe 3 3-(0Profilownety) 00 + 0.00(in)

-2.04(in) 110002N/A N/A N/A N/A N/A N/AInl'etment

& Scan Positions Actual Recordable Indications Analyst RemarksScan No.(s) increment Position Scan Position Yes No N/A Atachnment:

Start Stop Stan Sop Channel I (J] 0D 143 71.75 78.05 0.00 50.03 Probe I Channel 2 0 0D 0 0 Yes 0D NoChannel 3 l *. 0 ED Further Evaluation Channel I El E] t] Required:

Probe 2 Channel 2 D F) 171Channel 3 0] El [] Yes a) NoChannel I El E Archive Media:Probe 3 Channel 2 [E E)Channel 3 p 0 E External Hard Driv__ _ _ _ _ _ _ _Channell I -.Q " 0]Probe 4 Channel 2 FL rl 0 ' CD-ROMI Channel 3 El El 0 DVD-ROMAnalyst SNT Level I Date: Jesse R. Delgado I H 1 30 APR 2014 4 f-4L i ArWTIFORM N.. IIT.O (PA.. 1/111)

,)IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSite/Plant:

V.C. SummerUnit I Weld Identification:

1-4200A-29(DM)

Pro/Rev/Chg/ICN:

ISwT-PDI-AUTII/2iI Examination No,: ID-17Project No.. 13-11i07 Weld

Description:

(ioll.3I--)

Device Configuration:

13"-0045Mod.Conf.:

138-00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Temperature IFData Acquisition Operator (s) /SNT Level: Carios It Barberlno/lT 27-Apr-14 Start End Start End1232 1302 80 80Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller.

SG-NExT Lower Limit 71.30 71.60 Lower Limit 48.47 48.47 Beam Direction:

Twd/AwyScan: X Rotator Drive Upper Limit 78.05 78.05 Upper Limit 98.84 98.80 Probe Type: PA22-001Increment:

Y Axial Drive Inc. Interval (Resolution) 0.15 DC] (Scan Resolution) 0.A0 Scanning Speed: 2.0 inches per secondMode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 46Scan Motion: Bi-directional Radius In. 15.52" Weld C/L: 71.74"Correction:

N/A I _Elevation/Nozzle C/L N/AMaster Acquisition File: DMPipelD_90 AWY_270_TWDSkew.acq Calibration Records; Examination Notes:Probe Channel /Anga's)

Skew Scan Offset Step Offset Pipe Diameter

= 31.03"Probe I 1-(60-88-L) 900 + 70.34(in)

-1.29(in) 110002 Circumference

= 97.48"Weld Centedine

= 71.74Probe 2 2-(60-88-L) 270° -59.64(in)

-2.79(in) 110002 Examination Remarks:Probe 3 3-(O°Pror'dometry) 00 + 0.00(in)

-2.04(in) 110002N/A N/A N/A N/A N/A N/A: ~~~~~Data

":.,Increment

& Scan Positions Actual -Recordable Indleationa Analyst RemarksScan No.(s) Increment Position Scan Position Yes No N/A

Attachment:

Stan Stop Stan Stop Chane.l I 0 0] E-44 71.60 78.05 48.47 98,80 Probe I Channel 2 0 9 0 0 Yes 21 NoChannel 3 0 Q 0 Further Evaluation Channel I (] El Q Required:

Probe 2 Channel?

2 ] 2 )0Channel3 3 0 2 0 Yes 0 NoChannel I 0i C 0 Archive Media:Probe 3 Channel 2] ] 0Channel 3 E 0 0 0 External Hard DriveChannel I El 0Probe 4 Channel 2 nl G 3 0 CD-ROMChannel 3 ' 0 0 DVD-ROMA nalyst I SN T L evel/ D ate: J s AdPJesse .Deigado / II / 30 APR 2014 I r1)IsWTOaMrt..

.ITmq [a.llw.11)

• " " " IHI SOUTHWEST TECHNOLOGIES

~AUTOMATED ULTRASONIC EXAMINATION RECORDSit/Plant:

V.C. SummerUnit 1 Weld Identflicatlon:

1-4200A-29(DM)

Pro1RevlCh/IuCN:

ISwT-PDI-AUTII/2/I Examination No. ID-I1Project No.: 13-1107 Weld Descri so -to.sE @--i12s,)

Device Conf1turatioa:

136-00045 Mod.Conr.:

138-00102 Scan Path Drawing.

134-00121 Exam Date Examination Time Surface Temperature OFData Acquisition Operator (s)/SNT Level: Carlos Barberlno/1T 27-Apr-14 Start End Start End927 1007 so goScan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller.

SG-NExT Lower Limni 71.3Q 71.38 Lower Limit 0.00 0.00 Beam Direction:

Cw/CcwScan: X Rotatr Drive Upper Limit 74.80 74.80 Upper Limit 33.85 33,85 Probe Type: PA22-00DIncrement:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.5 inches per secondMode: Automatic Scan Coverion Units Inches Conversion Units Inches Number of Scans: 71Scan Motion: Bi-d&rectional Radius In. 15.52" Weld C/L: 71.74"Correction:

N/A Elevation/Ncazle C/L N/AMaster Acquisition File: DM_PipeID 0 CW 180_CCWSkew.acq Cbration Records:

Examination Notes:Probe Channel /Anele(s)

Skew Scan Offset Step Offset Pipe DiameterR=

31o.03Probe I 1-(60-880L) 00 + 27.77(in)

-2.04(in) 110001 Circumference

= 97.48"Weld Centerline

= 71.74Probe 2 2-<60-58L) 1800 + 37.21(in)

-2.04(m) 110001 inaio o rks:N/A N/A N/A N/A N/A N/AN/A NIA N/A N/A N/A N/AIncremenit

& Stan Positions Actual Recordable Indkcations Analyst RemarksScan No.(s) Increment Position Scan Position Yes No N/A

Attachment:

Start Stop Start Stop Channel I 0 0 070 71.38 74.80 0.00 33.85 Probe I Channel 2 0 0 0 -Yes 2] NoChannel 3

• 0 0 Further Evaluation Channel I 0 2] D 0 Required:

Probe 2 Channel 2 El 2] eChannel 3 0 0l 11 0 Yes E] NoChannel i 0 0 0D Archive Media:Probe 3 Channel 2 0 0 F)_Channel 3 1 0 2] 0 External Hard DriveChannel 1 0 0__Probe 4 Channel 2 E1 0 0 0 CD-ROMChannel 3 0 0D DVD-ROMAnalyst i SNT Level I Date: J D /AJeseR. Delgado/l l/30 APR 2014 -"ISw-rT'ORMt N. err0 (3ev. I/IN)

IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSite/Plat:

V.C. Summer Unit I Weld Identiffication:

1-4200A-29 (DM) Pro/ReylChg(ICN ISwT-PDI-AUT1I I ' Examiation No.: ID-19Project No.: 13-1107 Weld

Description:

so-B-iowN.L,.sE tD-.zis Dvice Confiratlon:

136-00045 Mod.Cont:

133-00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Temperature OFData Acq2isto Operator (s) SPIT Level: Carlos f. Barb2r.a0IT 270Apr- 14 Start End Start .EndL ]011 1058 so som ..Scan Controller Parumeterw Increment Axis PlannSd Actual Scan Ais Planned Actua l Positional Parameters Controller:

SG-NECT Lower Limit 71n30 71.40 Lowe3 Limit 32.550 a Beam Dimron: Cw/CcwScan: X Rotator Drive Upper Limit 474.80 Upper Limit 6 66.34 Probe Type: PA2C--ILncrancrt:

Y Axial Drive Inc. Interval (Resolution) 0.05 DC] (Scan Resolution) 0,05 Scanning Speed: 1.5 inches per secondMlode: Automnatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 71Scan Motion: Bi-directional Radius )a. 15.52" Weld CIL: 71.74"CorrecnSon:

N/A Eloystion/Nozzle CIL: NAMaser Acqisition File. DM_PipeeID 0 CW 18D CCW Skew.acq a4Examination Notes:Probe Channel tAnghfs)

Skew Scan Offset Step Offset *Pip Diameter 31.03"Probe I 1-(60-88-L) 00 + 27,77(in)

.2.04(in) 110001 Circwnfren~ce

=97.48"Weld Centerline

= 71.74Probe 2 2-(60-98-L) 1800 + 37,21(in)

-2.04(in) 110001Examination Remarks:NIA NIA NIA N/A N/A N/AN/A N/A N/A NIA NIA N/AIncrement

& Scan Positions Actual Recordable Indications Anal'st RemarksSa os Increment Position Scan Position Yes No NIA

Attachment:

SaN.() Start Stop Start Stop Channel I El ED3 1]69 71.40 74.80 32.50 66.34 Probe I Channel 2 0] 2] r- ] Yes E) NDChannel 3 0] [0 [] Furother l~valuaion Channel I Q e] I-' Required:

Probe 2 Chwemnl 2 0- r) F-1Channel 3 0] 2- 0][ Yes [D NoChannel 1 0-- .[Z) Archive Media:Probe 3 Channe 2 07 []Channe) 3 0 : External H-ard DriveChanel 1 2] " =Probe 4 Channel 2 n" [7 [ ] cImOMChannel.

3 ( " ] [ DVD-ROMAnnly iWI/SNT Leve l/D'ate , J ess~eR. Delgado tlll l30APR 2014 No. Ir'J'So (Rev. In 1)

IHI 111 SOUTHWEST TECHNOLOGIES

... " AUTOMATED ULTRASONIC EXAMINATION RECORDSite/Plazi

V.C. Sumrcr Unitl Weld Identification:

I-4200A-29 (DM) Pro/RevfChg/]CN:

ISwT-PDI-AULT1 1/2/0/1 Examinatiou No.. ID-20Project No.: 13-1107 Weld

Description:

SO o.IS'ouia.ýPsE ntr-W-) Device Conflguration:

136-00045 Mod, Coo.: 138-00102 Scan Path Drawing:

134-00121

Exam Date Examination Time Surface Tern rahre OFDats Acquisition Operator (s)/SNT Level: CarloslH.

Barberimo/IT 27-Apr.14 Start End Start End1105 1142 j 80 90q411Scan Controller Parameters Increment Axis Planned AActual Scan Axis Planned Actual Positional Parameters Controller:

SO-NExT Lower Limit 71.30 71.35 Lower Limit 65.00 65.00 Beam Direction:

Cw/CcwScan: X Rotator Drive Upper Limit 74.80 74.80 Upper Limit 98.84 98.80 Probe Type: PA22-001Increment Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.5 inches per secondMode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 71Scan Motion: Bi-directioned Radius In. 15.52" Weld CIL: 71.74"Correction:

N/A C/L: N/AMasterAcquisition File: DMPipe.DO0 Calibration Records-Examination Notes:Probe Channel/Angle(s)

Skew Scan Offset Step Offset Pipe Diameter 31.03"Probe 1 1-(60-88L) 00 + 27.77(in) 2.04(in) 110001 Circumference

= 97.48"Weld Centerline

= 71.74Probe 2 2-(60-88-L) 1800 + 37.21(in)

-2.04(in) 110001 gumtnation Remarks:N/A N/A N/A N/A N/A N/AN/A NIA N/A N/A N/A N/ADatgrAisuvtl*

.- .Increment

& Scan Positioas Actual Recordable Indications Analyst RemarksScan No.(s) Increment Position Scan Position Yes No N/A

Attachment:

Scan o SStart so Start Stop Channel I 0 0 0_70 71.35 74.80 65.00 98.80 ProbeI Channel2 01 91 0 Yes 0 NoChannel 3 0 2 0 Further Evaluation I Channel I 0 S 0 Required:

Probe 2 Channel2 2 l 0Channel 3 0 0 C Yes (A NoChtann.el 1 0 0 0 Archive Media:Probe 3 Channel 2 fl []Channel 3 ' E [D External Hard DriveChannel 1 0 0 ElProbe 3 Channel2 C -[ 0 CD-ROMChannel 3 1 0 0 DVD-ROMAnulyst /SNT Level /Date: & AJesse R. Delgado / 11 / 30 APR 2014 enf- A-- s, iAD UTro (". 11t1) 1111 SOUTHWEST TECHNOLOGIES AUTOMATAD EDDY CURRENT EXAMINATION IRECORD________

Site/Plant:

VC SUMMER UNIT I Weld Identifleatloa:ý

.-L4,WA..L (DM) %- ft-2!ý Pro/Rev/ChfJ1CN:

ISwT-AET-3/2/0 Examination No.: ET-ID-16PrDject No.: 13-1107 Weld Dcqcripn O t NO-to-rf End VB -SDevice ConfigurLtion:

13RS-nard Mod.Couf.:

13B-00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Temnperature 0CData Acquisition Operator (s) / NT Level- 7Ar1 Slarm End St r~l EndWILLIAM ANGELL /11 27-Apr-14 1153 1228 68 68Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Scan Axils Planned Actual Positional Parameters Controller:

ANT Lower Limit 71.30 71.30 LowerLimit 0.00 0.00 Beam Direction:

NIAScan: X Upper Limit 78.05 78.05 Upper Limit 50.00 50.00 JET Probe Size: .38 (in:Increment:

Y Increment Interval 0.150 Resolution 0.020 Scanning Speed 1.5 "/sE(Mode: Automatic Scan Conversion Counts 16000 Convursion Counts 558.54 Number orScans:

46Scan Motion; Bi-directional Conversion Units Inches Conversion Units Inches AzimunthNozzle CIL 76.03'Correctiort:

N/A _levationifNo'le C(/ NIAModule Parameters:

Calibration Records:

Examination Notes:Status Channel(s)

Skew Scan Offset SlCp Offset Pipe diameter=

31.03"Probe I On 1-2 + 22.5* 5.35" -2.21" ET-03-VCS-01 Circumference-97.48" Probe 2 On 3-4 -22.59 -5.35" -2.21" ET-03-VCS-01 Wcld C/L,' 76,03"Examination Remarks:Examination Remarks:Examination from 0 to 180I .'Data AiaylIncrement

&Scan Positions Actual Recordable Indications Analyst RemarksScan No.(s) Increment Position Scan Position Yes No VN/A

Attachment:

,____ Start Stop Start Stop Prow I Channel 1 0 2 0- -Ees 0 No46 71.30 78.05 0.00 50.00 Channet 2 _0 0 Further Evaluation Required:

Probe2 Channel3 0 .E) 0Channel 4 0 ) 0 [Q (Yes ONoProbe 3 Channel 5 0 0] E] Archive Media: __Channel 6 0. 0 0 0D External Hard Drive_____ Channel 7 0- Q 0 0 CD-ROMChannel B El 0 0 DVD-ROMA nalyat / SNT Level / Date:WLLIAM ANGELL/ II/ Z ,/alW 7OO 1,e zr ,ae /ISWT FORM No. rr MASf Project No. 13-1107 EXAM ET-ID-16 Date: 26-April-2014 Sf b IT A4,k Artto =-,."vow* n-1* (1*5IlII :4*14JiLI THU SOUTHWEST TECHNOLOGIES A..TOMA...

EDDY CURRENT EXAMINATION RECORDSitc/Plant:

VC SUMMER UNIT I Weld Identifleation:

A4A! _ (DM) I1-RMA -t Pro/Rev/C&WCN:

ISwT-AET-3/2/0 oProject No.: 13-1 107 Weld

Description:

Outlet NoT.-to-Safre End 'B" Device: Conjieration:

136-00045ExmntoN..

K-D1Mocl.Cou.:

138-00102 Scan Path Drawing:

134-00121

}xam Date iExamination Time Surface Temperature OCData Acquisition Operator (s) I SNT Level: 27-Apr-4 d Start EndWILLIAM ANGELL/ 11 1 1232 1302 68 68Data Acqulttlon Scan Controller Parameters lcrement Axis Planned Actual Stan Axis Planned Actual Positional Parameters Controller, ANT Lower Limit 71.30 71.30 Lower Limit 48,47 48.47 Bcam Direction:

Nh,Scan: X Una Limit 78.0s 78.05 Upper Limit 98.84 98.84 "ET Probe Size: .38 (inlncr=ct:

Y Inlmuent Interval 0.150 Resolution 0.020 Scanning Speed I.S "s FJMode: Auomatlic Scan Conversion Counts 16000 Convesion Counts 558.54 hurtber orScans:

46Soan Motion: Si-directional Conversion Units Inches Conveasion Units Inches AztmuandVNozzle C/IL 76.03Correction:

N/A IECevioV IL NI1Module Parameters.

Calibration Records:

Examination Naot:Status Channel(s)

Skew Sean Offset Step oiet Pipe diamer= 31.03"Probe I On 1-2 + 22.5* 5.35" -2.21* ET-03-VCS-01 Cir.ucnftree

-=97,48"Probe 2 On 3-4 -22.5 -5.35" -2.2 1 *"T-03-VCS,01 Weld CIL- 76.03"Examination Rewarb;Examination Remarks:Examinhtion fmm 180 to 2360°.-.. ... ., ", : .-.... --..Increment

& Scan Positions Actual Reeordable Indications Analyst RemarlsScan No.l) Increment Position Scan Position Yes No N/A

Attachment:

Start Stop Start Stop Probe I Channel 1 0- 0 C) L-es O No46 71.30 78.05 48.47 98.40 -Channel 2 03 [a 0 Further Evaluation Required:

Probe 2 Chennel 3 0 0 C3_ Channel 4 0 E] 0 0(as 2NoProbe 3 Channel5 0 0 0 Archivc Media:Channel8 0 0- El E) External Hard DriveProbe 4 Channel7 j [0 1Z) 0 CD-ROM_______ _____ __ ___ _____ ______Channel 8 0 [ DVD-ROM __________________

Analyst / SNT Level /Date:WILLIAM' ANGELL/ IIr/ "iY "m 0,oa tio Ib" Project No. 13-1107EXAM ET-ID-17Date: 27-April-2014 Op *-- -Itmlb _U46it"~vs..4SA:w 30- --',iJiI I HISOUTHWEST TECHNOLOGIES AUTOMAW EDDY CURRENT EXAMINATION RECORDSite/Plant VC SUMMER UNIT I Weld ldenllflcatiot fLI-A 3.& (DM) %--?J'lN

.ProIRev/Cbg/ICN:

ISWT-AET-3/W0 Examinalton No.: IT-D-i18Project No.: 13-1107 Weld

Description:

JOutt N0z.-to-Safý End *B" _Deice Cont ration: 136-00045 Mod.ConL:

138-0D102 Scan Path Drawing, 134-00121 Exam Date Examination Time Surface Temperature

'CData Acquisition Operator (s) / SNT Level: 27-Apr-14 Start End Start EadWILLIAM ANGELL / l 0927 1007 69 68Data Acquisition Scax Controller Parameters Increment Axis Planned Actual San Axis Planned Actual Positional Parameters Controller ANT Lower Umil 71.30 71.30 Lower Limit 0.00 0.00 Beam Direction:

N//ScX: X Upper Umit 74.80 74.80 Upper Limit 33.85 33.15 JET Probe Size: .38 (inIY Increment Interval 0.030 Resolumion 0.020 Scanning Speed 1.s "AeRMode: Automatic Soan Conversion Counts 16000 Conversion Counts 558.54 NumberofScans:

71Scan Motion: Bi-directional Conversion Units Inches Conversion Units Inches AzimanthlNozzo C/L 76.03Correction:

N/A E__vadowNoJ v C/L NUWModule Parameters:

Calibration Records:

Examination Notes:Status Channel(s)

Skew Scan Offset Step Offset __Pipe diameter-31.03'Probe I On 1-2 +22.50 5.35" -2.21" ET-03-VCS-01 Circumftrince

-97,48rProbe 2 On 3-4 -22.5Y -5.35" -22l" ET-03-VCS-01 Weld CIL- 76.03'....._ __ Examlmxtloa Remarks:--____E "xamination Remarks:....___ _ExaminallO fim 0 to 1250.Increment

& Scan Positions Aetual Recordable Indications An*"yt RemarksScan No.(s) Incmmaent Position Scan Position Yes No NIA

Attachment:

Start Stop San stop Pro I Channel 1 0 1] --Res 0 No71 71.30 74.80 0.00 33.85 Channel 2 [ 0 0 Further Evaluation Required:

Probe 2 Cfinnet 3 0 [j 0[_Chatrnill4 0U 0 Eks OaNoProbe 3 Chinnn 5 [I 0 03 Archive Media:Channel 6 0 ' [0 E) External Hard DriveProbe 4 Channel 7 0 0 [] 0 CD-ROMChannel8

" 0 10 DVD-ROMAnalyst / SNT Level I Date:WILLIAM ANGELL/ 11/7swr FORM N& FT IwoI I /

tP ro je c t N o .1 3 -1 1 0 7 E X A M E T -ID -1 8 D a te : 2 7 -A prl-2 0 1 4NJ 414 01 ý

• H a9Is fIn e lk no, uuw-fm&*fmoonsift I* rwtWnWIBE~Uaum~i bWiQwhiuIAIIK-4~14.ISb.A4S24~.

)IHI SOUTHWEST TECHNOLOGIES AUTOMAT D EDDY CURRENT EXAMINATION RECORDSite/Plant:

VC SUMMER UNIT I Weld Identification:

A(,

(DM) % -kobA Pro/Pw.v/CWCJICN:

ISwT-AET-32/0 Examinaton No.: ET-ID-19rojet No.: 13-1107 Weld

Description:

Outlet No,-to-Saft End "B" .Devlc Confluratlon:

136-00045 Mod.Conr.:

138"0102 Scan Patt Drawing:

134-00121 Exam Date Examination lime Surface Temperature CData Acquisition Operator is) / SNT Level: 27-Apr--14 start Ead Start EngdWILLIAM ANGELL] 11 1014 1058 68 68Data Acquisition Scan Controller Parameters jlcrement Axis Planned Actual Scan Ais Planned Actusl Positional Parameters Controller:

ANT Oimit 71.30 71.30 Lower Limit 32.50 32.50 Beam Direction:

N/IScan: X Upper Limit 74.80 74.80 Upper Limit 6634 66.34 ET Probe Size: .38 (inIncrement Y Increment Interval 0.050 Resolution 0.020 Scanning Speed -.5 "/Se8Mode: Automatic Scan Conversion Counts 16000 Conversion Counts 558.54 Number of Scans: 71Scan Motion: Bi-dirctional Conversion Units Inches Conversion Units Inches AzimgWh/d C/CIL 76.03Correction:

NIA ___leviawwcnlozzle C/L NitModule Parameters:

Calibration Records:

Examination Notes:States Chaoseka)

Skew Scan Offset Step Offset Pipe diameter

-31.03"Prbe I On 1-2 + 22.50 5.35" -2.210 ET-03-VCS-01 Circumference

-97.49"Prob 2 On 3-4 -225 -5.35" -2.21F ET-03-VCS-01 Weld C/LP 76.03"Examination Remarks:Examination Remiab:_Exuninaion from 120 to245'.increentea Scan Positions Actual Recordable Indications Analyst RemarksIncretnent Position Scan Position Yes No NIA Anachm:ni:

Start Stop Start Stop Probe t Channel 1 0 0 0 E 'Yes 0_ No71 71.30 74.80 32.50 66-34 _ _ Channel 2 0 2 [ Furher Evaluation Required:

Probe 2 Channel 3 0 9R f 0_Channel 4 0 E0 0 E'es ONoProbe 3 Channel 5 []0 0 El Archivc Media:3Channel8 0 0 B 0) External tlard DriveProbe 4 Channel 7 0 0 1B 0 CD-ROMChannelS c p 0 DVD-ROMAnalyst /ISNT Level I Dare-WILLIAM ANGELL/It I1/Swr fth jrT 100/

)Project No. 13-1107EXAM ET-ID--i 9Date: 27-April-2014

.h. .~.. ~-- -, -I MISOUTHWEST TECHNOLOGIES AUTO EDDY CURRENT EXAMINATION RECORDSite/Piat VC SUMMER UNMT 1 Weid Idenilficatlon

%, (.DM) ._I 3A- Prolkev/CbnJCN:

ISwT-AET-3/2/0

,Project No.; 13-1107 Weld Descrption:

[o utlet Noz.-to-Safk End "R" D evic'e Configuration:

1364010 5 E m lminN .T IDMod.Con£:

138-00102 Scan Path Drawlng:

134-00121 Exam Date Examlnmtloa Time Surface Temperature'C Data Acquisition Operator (s) / SNT Level: 27A14 Start End Start EndWILLIAM ANGELL 111 I7 41105 1142 68 68Data Acqpbition Sean Controller Parameters lncrement Axis Planned Actual Scan Ais Planned Actall Positional Parameters Controller:

ANT Lower Limit 71.30 71.00 Lower Limit 65.00 65.00 Beam Direction:

N/AScan: X Upper Limit 74.80 L 74.80 Uppa Limi 98.34 98.84 ET Probe Size: .38 (infIncrement Y Increment Interval 0.050 Resolution 0,020 Scamning Speed i.s "ISEMode: Automatic Scan conversion Counts 16000 Conversion Comnts 558.54 Number of Scans: 7IScan Motion: Bi-directional Conversion Units Inchles Conversion Units Inches AzifAWAhNouk C/IL 76.03'Correction:

N/A _ElvmioINozzle C/L N/aModule Parameters:

Callbrtlion Records:

Examination Notes:Status Channel(s)

Skew Scan Offset Step Offset Pipe diameter

-31.03"Probe I On 1-2 + 22.5" 5.35" -2.21" ET-03-VCS-0l Circum*cnce

= 97.43"Probe 2 On 3-4 -22.5" -5.35" -221" ET-03-VCS-01 Weld C/IL 76.03"Exauufnateon Remarks:Examination Rcmark:Examination from 249 to 365",Increment

& Scan Positions Actual Recordable Indlcatlou Anayst RemarksScan No.(s) rncr nt Posltion Scan Position Yes No N/A Artacme-nt:

Stan NS. Start. Stop St. Stop probe I Channel 1 0 0D 1) E) Yes 0 NO71 71.00 74.80 65.00 98.84 Channel 2 0 0 0 Further Evaluation Required:

Probe 2 Channel 3 0 G 0 [_-Chanrel 4 0 f 0) [ 3 I es ONoProbe 3 Channel 5 0 0) 0 Arcbive Media:Channel6 0 0 E 0E Extrnal Hard DriveProbe 4 Channel 7 0 D 0 0 .CD-ROMChannel 8 0 0] DVD-ROMAnalyst/

SNT Level / Date:WILLTAMANGELL/

H1/ISV/ 1.i1KV_1V_.A" IIf -I I , I /

Project No. 13-1107EXAM ET-ID-20Date: 27-April-2014 111' IHI Southwest Technologies Examination Summary RecordG"VgI'C" ummer Nudear SIation Unit 1,, SUm V Sheet No. 00500: Steam GeneratOr Une Sl3. "C" SG In Noz-t-,SE IdenrW%=on:

1-4300A-29 (OM)Method nmff tICN Eiwznlnatlon host No78. No. NRW Other RemarksAUT ISwT-PDI-AUTI1j2/I/1 tUT Probe 1 (5&-W) 1100-4 21-22 X -UT TWD& AWY ExamAUT ISwT--PDI-ALUT 1120I1 UT Probe 2 f6o-88')

11o1004 21-22 X -LIT TWD & AWY ExamAUT ISWT-PDI-AUT11/2)12 0 T Probe I (M0""- 110003 23-25 X -UT CW & CCW ExamAUT ISwT-POI-AUTI1I2/0 Lrr Pro 2 (60.88")

110003 23-25 X -UT CW & CCW ExanAET ISwT-PDI-AET3/210/0 r Probe I ET03-VCS-04 23-25 X -Eddy Cunent ExamAET ISwT-PDI-AET312O ET Pmbe 2 ETs-VCS-04 23-25 X -Eddy Current ExamExaminatfn Summary:This weld was examined from the Inside surface using SG-NExT.

T-Ill. & MS5BO examination equipmenL The examination was limited due to the proximity of the nonzle taper and a small ares of weld spatter.

The examination coverage was 9.1.5%.No recordable indicatin's w"ere detected during this examination.

Snam:Date:

30 zaPlA ~So[H P aroject ELeti &j Ia __________________

..~~2D q.** ...,

SthIl eHnooIeIHI SOUTHWEST.TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDShimPlant:

VC. SummerUnit)

Weld Identlflcaton:

1-4300A-29 (DM) Pro/RevIChp/ICN:

ISwT-PDl-AUTII12/011 Examination No.: /TD-2RRProject No.: 13-1107 Weld

Description:

soGc-IoNoaIo-Se to*.i m- Device Conflguration:

136-00045 Mod.Conf.:

38.-00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Temperature OFData Acqtisltion Operator (s)I SNT Level- Bryan Wright/ I 25-Apr-14 Start End Start End2215 2243 80 80"" -kAT " Scan Controller Parameters Increment Axis Planoe Actual Scan Axis Planned Actual Positional Parameters Controller.

SG-N~xT Lower Limit 7 i.3 72.10 Lower Limit 0.00.00 Beam Direction:.

Twd/AwyScan: X Rotator Drive Upper Limit 78.05 78.02 Upper Limit 5D. 10 50.03 Probe Type: PA22-00lIncrement; Y Axial Drive Inc. Interval (Resolution) 0.1i5 DCI (Scan Resolution) 0.1I0 Scanning Speed: 2.0 inches per secondMode: Automatic Scan Conversion Units inches Conversion Units Inches Number of Scams: 46Scan Motion: Bi-drectional Radius In. 15.52" Weld C/L- 71.74"Correction*.

N/A ElevstiorLNozzde CtL" N/AMaster Acquialtton File: DM_PipeID 90 AWY 270 TWDSkew.accI Calibration Records:

Examination Notes:Probe Channel /Angle(s)

Skew Seen Offet Step Offset Pipe Diameter

= 31t.03"Probe I 1-460-88-L) 9" + 70.34(in)

-1.29(in) 110004 Circumference

= 97.48"P+ )- Weld Centerline

= 71.74Probe 2 2-(60-880L) 2700 + 59.64(in)

-2.79(in) 110004 Examination Remarks:Stpeda ryinctonremena derks el:SeProbe 3 3-(0*Profilometry) 0V + 0.00(in)

-2.04(in) i 10004 S earl increment due to weld srerN/A N/A N/A N/A N/A N/AIncremenlt

& Scan Positions Actual Recordable indications Analysg RemarksScan No.(s) Incremnent Position Scan Position Yes No N/A Afttchment:

Start Stop Starn Slog) Channel 1 0] G) 1141 72.10 78.02 0.00 50.03 Probe 1 Chaner1~2 0- G)] [] Yes 2] NoChannel 3 11 D ED Fuflher Evaluation IChannel 1 0] [ [ R~equh'od:

Probe 2 Channel 2 r] ] [Channe 3 0 0 2 Yes 2D No,ChanneA 1 [] 0 [] Archive Media:Probe 3 Channel 2 0] Q] BChannel 3 11 0] [][ External Hm-d DriveChannel I n] 0Probe 4 Channel 2 M7 11 C][ CD-ROM_.Channell 3 [Q 0] e DVD-R.0MAnalyst / SNT Level / Date: Jes s iL Delgado/

f1/ 30APR 2014 A --iswr FORM 11(m V1 is [Re'. 111 I)

)NIHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSitcplant:

V.C. Suwmer Unit I Weld Idenfirmation.

1-4300A-29 (DM) Pro/Rev/ChZiCN:

ISwT-PDI-ALrT 11/2/0/1 Examination No.: ID-22RRProject No.: 13-1107 Weld Descrption:

0f OC-RNo*-,Se gs(1.1VS30 Device Conf oration:

136.00045 Mod.Conf:

138-00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Tern arture OFData Acquisition Operator (s)I SNT Level: ryan W right/ 25-Apr- 14 Samrt End Start End2332 0000 30)80-.. ...... ...I .u a .. _. .. .- ... _ _ , , " .... , *: -h ...Scan Controller Parameters Increment Axis Planned Actual Ran Axis Planned Actual Positional Parameters C.ontroller.

SG-NFIxT Lower Limit 71.30 71.30 Lower Limit 48.47 48.47 Beam Direction:

Twd/AwyScan: X Runner Drive Upper Limit 78.05 78.05 DUp-RLimit 98.84 9O.84 Probe Type: PA22-00OIncrement:

Y Axial Drive Inc. Interval (Resolution) 0.15 DC1 (Scan Resolution) 0.10 Scanning Speed: 2.D inches per secondMode: Automatic Scan Conversion Units Inches CDonversion Units Inches Numbr of Scans: 46Scan Motion: Bi.-dieceional RDaius In. e552" Weld C1L: 71.74"correction:

NIA .vation/Nozzle C/L: N/AMuster Acquisition File: DM_Pipe_]D 90 AWY 270 T'WD Skew.acq Calibration Reco"d= Examination Notes:Probe Channel/Angle(s)

Skew Scan Offset Step Offset Pipe Diameter

31.03"Probe I ]-(60-99-L) goo + 70.34(in)

.!.29(in) 110004 Circumf~emc=

97.48"Weld Centcrline

-- 71.74Probe 2 24.("80-8L) 270* + 59.64(in)

-2.79(in) 110004Examination Remarks:Probe 3 3-(OoProfilometr')

00 + 0.00(in)

-2.04(in)

I1100D4NIA N/A NtA NtA N/A NIAIncrement

& Scar. rosatloim Actual Recordable Indications Analyst RemarksSa D( Increment Position Scan Position Yes No N/A

Attachment:

Sn .() Star Stop Start Stop Channel 1 0] [a 1146 71.30 78.D5 48.47 98.84 Probe I Channel 2 0'- 21 0] 0 Yes 0] NoChannel 3 11 0" 0] Further Evaluation

-,Channel 1 0'I [] l' Required:

Probe 2 Channel 2 n] [ "Channel 3 ID C] [ ] Yes E) NoChanne) 1 0] 0 R-1[ Archive Media-Probe 3 Channel 2 [] EDChannel 3 F1 a] .T 2 External Hard DriveChannel I [7 0 0] [Probe 4 Channel 2 n- [] [] 0 CD-ROMChannel 3 E) 0 ~ Ej DVD-ROMAnalyst ISINT L~evel/Date:/ Jesse R. Delgado I Il 130 APR 2014XGT UTSO (Vw 111v Il)

)IHI IHI SOUTHWEST TECHNOLOGIES S"" AUTOMATED ULTRASONIC EXAMINATION RECORDSite/Plant

Y.C, Summer Unit Weld Identification:

1-4300A-29 (DM) ProfRecvChg'CN:

ISwT-PDI-AUTI 1/2/0/I Examination No.: TD-23RRProject No., 13-1107 Weld

Description:

So0C1i"Nw-to-SE DeviceConfl Vuration:

136-00045 Mod.Conf:

138-00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface TemperatureOF Dot e Acquisition Operator (s) SNT Level; Car)os H. Barb2rino)IT 25-Ap1-14 Start End Start End1:24:00 PMT 1:5D:00 PM 8D soScan Controler Parameters Increment A Sa n Actual R l A xis Planned Actual Positional Parameters Controller.

SO-NExT Lower Limit 71.30. 71.30 IEower Limit 0.00 0.00 Beam Direction:

Cw/CcwScan: X Rotator Drive .Upper Limit 74.80 75.D0 Upper Limit 33.85 1 26.00 Probe Type: PA22-001Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: Aa e inches per seconMode: Automatic Scan Conversion Units Inches Conversion Units Inches Numbe of Scans: 71Scan Motion: Bi-directional IRadius In. 15.52" Weld CIL: 71.74"Correction:

N/A Blevanion/Nozzlc C/L: NIAMaster Acquisition Vile: DMPipejiD_0 CW I g0 CCWSkew.acq Calibration Records:

Examination Notes:Probe Channel/AngPe(s)

Skew Scan Offset Step Offset Pipe Diameter 31.03"Probe I 1-(60-88-L)

0. + 27.77(in)

-2.04(in)

I1I0003 97.48"Weld C3eterline

= 71i.74Probe2 2-(60-88-L) 180P + 37.21 (in) 2.04(in) 110003 Examination Remarks-N/A N/A NIA N/A N/A N/AN/A N/A N/A N/A N/A. N/AIncrement

& Scan Positions Actual Recordabk Indications AValDt RemarksOSa o() Increment Position Scan Position Yes No N/A

Attachment:

AanStar Stop Sta Stop Channel I .Q [74 71.30 75.,DO 0.00 26.00 Probe I Channel 2 0] 11 0] Yes S] NoChannel 3 [] 0 0Z Further Evaluation Channel I El E] 0-' Required:

Probe 2 Channel 2 n' F3 A 2Channel 3 0 b 2 0 Yes El NoChannel 1 0] 0] 0 Archive Media:Probe 3 Channel 2 Q .0 ElChannel 3 El B] E] External Hard DriveChannell 0 [0[]Probe 4 Channel 2 1-1 13 9] 0 CD-ROMIChannel 3 E) []D[ DVD-ROMAnalyst ISNT Uevel /Date:FORIM Na. UT..5, lar. fINt)

-- z.;ý ))IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSlterPIant

V.C. Summer Unit I Weld Idenfilcatlon:

I-4300A-29 (DM Pro/Rev/Chg/lCN:

ISwT-PDI-AUTM1/I10/I Examination No.. ID-24RRProject No.: 13-1107 Weld

Description:

so-chNoJ-iD-su t2ý.-45, Device Configuration:

136-00045 Mod.Conf.:

138-00102 Scan Path Drawing:

134-00121 Exam Date .Examination Time Surface Temperature F.Data Acquisition Operator (9) 1 SNT Level: CaroHs R. Barberlno/iT' 25-Apr-14 Start End Start I Ed1710 1820 80 80Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller.

SG-NExT Lower Limit 71.30 71.30 Lower Limit 32.50 25.00 Beam Direction:

Cw/CcwScan: X Rotator Drive Uppe Limit 74.80 74.80 Upper Limit 66.34 66.34 Probe Type: PA22-001Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.5 inches pa secondMode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 71Scan Motion: Bi-directional Radius In. 15.52" Weld C/L: 71,74"Correction:

N/A I Elevation/Nozzle C/IL: N/AMaster Acquisition File: DMPipe ID0 CW_180_CCWSkcw.acq Calibration Records:

Examination Notes:Probe Channel/Angle(s)

Skew Sean Offset Step Offset Pipe Dianeter

= 31.03"Probe I 1-(6048-gL) 0 + 27.77(in)

-2.04(in) 110003 Circumference

= 97,48"Weld

= 71.74Probe 2 2-(60-88-L) 1800 + 37.21 (in) -2.04(in) 110003________________

_______________

-Examination Remarks:N/A N/A N/A NIA N/A N/AN/A N/A N/A N/A N/A N/ADat A-0;alIncrement

& Stan Positions Aeluai Recordable Indicationa Analyst RemarksScan No(s) crement Position Scan Position Yes No N/A

Attachment:

SSalt Stop Stan Stop Channel1 0 0 071 71.30 74.80 25.00 66.34 Probe I Channel 2 3 ( a] El Yes E0 NoChannel 3 0 0 0 Further Evaluation I Channel I [1 El Q Required:

Probe 2 Channel2 D R) [1Channel3 0 0 [] 0 Yes 0l NoChannel I 0 01 0) Archive Media:Probe 3 Channel 2 -1 11 0_Channel 3 2l E ) " Extarnal Hard DriveChannel!

l E__ _Probe 4 Channel 2 [] -0 (a 0 CD-ROMChannel 3 0 El 0 DVD-ROMAnyalyt/

SNT Lel /Date: Jesse R. Delgado /111/30 APR 2014ISWT FOaRM N. (Ra, 1II1

)1"11" IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSita/Piant:

V.C. Summer Unit l Weld Identification:

1.4300A.29 (DM) ProtRev/ChW1CN:

ISwT.PDI.AUTI It0/I Examination No.: ID-25Project No.: 13-1107 Weld Description-so-c"C .No,--Sa 424fr-MS$)

Device Configuration:

136-00045 Mod.Conf.:

138.00102 Scan Path Drawin: 134-00121 Exam Date Examination Time Surface Temrerature OFData Aequnition Operator (a) / SNT Level: Carlos It. Barberino/IT 25-Apr-14 Start End Start End1538 164980 80* Dat .... .ioc --Scan Controller Parameters Increment Axis Planned Actual Sean Axis Planned Actual Positional Parameters Controller.

SG-NExT Lower Limit 71.30 71.30 Lower Limit 65.00 65.00 Beam Direction:

Cw/CcwScan: X Rotator Drive Upper Limit 74.80 75.00 Upper Limit 98.84 98.80 Probe Type: PA22-0DIncrement:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.5 inches per secondMode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 71Scan Motion: Bi-directional Radius In. 15.52" Weld CIL: 71.74"Correction:

N/A Elevation/Nozzle C/IL: N/AMaster Acquisition File; DMfPipejD 0QCWI 0 CCWSkew.acq Calibration Records:

Examination Notes:Probe Cbannel/Anglek)

Skew Scan Offset Step Offset Pipe Diameter

= 31.03'Probe I 1(60-88-L) 0° + 27.77(in)

-2.04(in) 110003 Circumferenoe 97.48"Weld Centerine

-71.74Probe 2 2460-98-L) 1800 + 37.21 (in) -2.04(in)

I10003 Examination Remarks:N/A N/A N/A N/A NIA N/AN/A N/A N/A N/A N/A N/A--Dat# Anly_.....

.Increment

& Scan Positions Actual Recordable Indications Analyst RemarksScan No.(s) Increment Position Scan Position Yes No N/A

Attachment:

Start Slop Start SOP Channeli 0 0 El75 71.30 75.00 65.00 98.80 Probe I Channel 2 El 0] 03 0 Yes 21 NoChannel 3 El 0l 0 Further Evaluation Channel I El] G L Required:

Probe 2 Channel 2 [1 91 []_Channel3 0l El 0 [3 Yes 2 NoChannel 1 0 [] 0l Archive Media:Probe 3 Channel 2 E]Channel 3 El El 0 0 External HIard DriveChannell G1 LI 1Probe 3 Channel 2 F[ 11 0 E CD-ROMChannel 3 0 El 0 DVD-ROMA n a ly st t S N T L e vel / D a te : J. RJeset. DelgadoN/.1

/ 30 APR 2014l5WT7FIRM N& 0750 (Zo illv l)

IImI SOUTHWEST TECHNOLOGIES AUTOMATjFD EDDY CURRENT EXAMINATION RECORDSite/Planl:

VC SUMMER UNIT I Weld identlflcation:

(DM) 1-47 -.. Pro/REV/CbJICN:

ISwT-AET-3/2/0 Project No.: 13-1107 Wed

Description:

Ilnict Noz.-to-Safc End "C" Device Configuration:

136-00045

__alnaton

_o.: _T-! D-7_RMod.Conf.:

138-00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Temperature 0CData Acquisition Operator (s) / SNT Level: I Start End Start EndWILLIAM ANGELL/ 25-Apr-4 134 1350 68 68Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller ANT Lower Limit 71.30 71.30 Lower Limit 0.00 0.00 Beam Direction:

N/AScan-: X Upper Limit 74,80 75.00 Upper Limit 33.85 26.00 ET Probe Size: .38 (in:Increment:

Y Incremcnin Interval 0.050 Resolution 0.020 Scanning Speed 1. 5/SE(Mode: Automatic Scan Conversion Counts 16000 Conversion Counts 885.54 Number of Scans, 71Scan Motion: Bi-directional Conversion Units Inches Conversion Units Inches umzmh(Nozzle CM. 71.74Correction:

N/A __vasio,.Voxde CIL NIAModule Parameters:

Calibration Records:

Examination Notes:Status Channel(s)

Skew Scan Offset Step Offset Pipe dianker = 31.031Probe I On 1-2 +22.51 5.35" -2.2 1" ET-03-VCS-04 Circumference

-97.48"Pmbe 2 On 3-4 -22.50 -5.35" -2.21". ET-03-VCS.04 Weld CIL= 71.74"Examination Remarks:Examination Remarks:Examination from 0 to 125'.-r -.---..........

-. ---- .IIncrement

& Scan Positions Actual Recordable Indications Analyst RemarksScar No.(s) Increment Position Scan Position Yes No N/A Atlachmcnl:

__an___.__)

Start Stop Stan Stop Probe I Channel 1 0 " f Res 0No.75 71.30 75.00 0.00 26.00 Channel 2 0 2 0 Furth erEvaluation Required:

Probe2 Channel 3 0 Q 0I-Channel 4 03 0 0 EYes ONoProbe 3 Channel 5 0 0 E0 Archive Media:Channel 6 0 0D ED External Hard DriveChannel 7 0 0 2 0 CD-ROMIrobe4Channel 8 0] El 2 DVD-ROMAnalyst / SNT Level / Date:WILLIAMMANCELL/1/

r I/ /15wTPFORMNO iv£T lawS Projec No. 13-110D7 ET-ID-23R Date: 25-ApriI-2014 bMM~~~U giUaT-Mods*04"

))AUTOMA 1f1 SOUTHWEST TECHNOLOGIES

.... ...........

.....D EDDY CURRENT EXAMINATION RECORDSite/Plant

VC SUMMER UNIT I Weld Identfication:

ElA / % (DM) I- -4TO V Pro/Rev/Cbh%0CN:

ISwT-AET-3/J0 Exmmlnation No.: ET-ID-24 RProject No.: 13-1107 Weld

Description:

Inict Naz..to-SafeEnd C" Device Conftgrotlon:

136-00045 Mod.Conf.:

139-00102 Scau Path Drawinl:

134-00121 Exam Dat Examination Time SurfaceTemperature OCData Acquisition Operator (s) I SNT Level: 25-ApI-14 Start End Start EndWILLIAM ANGELL / I A 1710 1520 63 68Data Acquisition Scan Controller Parameters Increment Axis Planned Actual Sn is lanned c e MaF Positional Parsmeters ANT Lower Limit 71.30 7130 Lowe Limit 32.50 25.00 Beam Direction:

N/AStan: x UpperLimit 74.80 74.80 Upper Limit 66.34 67.34 ET Probe Size: .38 (inIncment:

Y Incremant Interval 0.050 Resolution 0.020 Scanning Speed I.5 "/"Mode: Automatic Scan Conversion Counts to 100 Number ofScans:

71Scan Motion: Bi-direotional Couvrsion Units Inches Conversion Units inches Azimunmtwozle CI.L 71.74'Corrw¢ion; N/A E1evation/Nozzl CIL NIAIModule Parameters:

Calibration Records:

Examinaldoo Notes:Status Channe(s)

Skew Scan Offset Step Offset Pipe diameter

= 31.030Probe I On 1-2 + 22.5* 5.356 -2.21" ET-03-VCS-04 Circunmfeence

-97.48*Probe 2 On 3-4 22.50 -5.35" -2.21" ET-03-VCS-04 Weld C/ip 71,74"_Examination Remarks:Examination Remarks:..,_ Examination from 120 to 245'.Increment

& Scan Positions Actual Recordable Indications Analyst RemarksScan No.(s) Increment Position Scan Position Yes No N/A Altachment:

LfITED SCAN DUE TX RASF.D ARj 'X' OF 54,11TOSuet Stop Start Stop Prob I Channel 1 [a D Efes QNo lX0 OF 55.35, -Y" OF 71.09 TO "Y" OF 70.1475 71.90 74.80 25.00 67.34 Channel 2 0 03 0 Further Evaluation Required:

Probe 2 Channel 3 0 el 0Channel 4 0 a 0 Dtes E'NoPo__ _3_Channel 5 0 0 E) Archive Media:_____ 3 Channel 6 0 0 EBxternal Hard DriveProbe 4 Channel 7 0 -0 CD-ROMChannel 8 0 0 0 DVD-ROMAnalyst I SNr Level I Date:WILLI.AM ANGELL fI III#f/ro" rr 16"r Project No. 13-1107 ET-ID-24R Date: 25-ApriI-2014 04"*J I H-T I[Hi SOUTHWEST TECHNOLOGIES AUTOMAT D EDDY CURRENT EXAMINATION RECORDSite/Plant

VC SUMMER UNIT I Weld Identification:

At N, 4 @A-4AA (DM) --Po/Rev/C CN: SwT-AT-3/2/0 exminao N ET-D25Project No.; 13-1107 Weld Deserptton,:

Inlet No7_-t1q.Sal End "C" Device Configuration:

136-00045 Examination No.: ET-_D-2$Mud.CoRf.:

138-00102 Scso Path Drawing:

134-00121 Exam Date Examination Time Surface Temperature OCData Acquisition Operator (s) /SNT Level: 25-Apr-14 Start End Start EndWILLIAM ANGELL / 11 1538 1649 61 69Data Acquisition Sean Controller Parameters lacrement Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller ANT Lower Lmit 71.30 71.30 Lower Limit 65.00 65.00 Beam Direction:

NIAScan: X Upper Limit 74.80 74.80 Upper Limit 91.84 98.84 ET Probe Sizc: .38 (in'Increment:

Y Increment Interval D.050 Resolution 0.020 Scanning Speed 1.5 "SECMode: Automatic Scan Conversion Counts 16000 Conversion Cours 885.54 Number of Scans: 71Scan Motion: Bi-directional Conversion Uniu Inches Conveion Units Inches AzimunihiNo.de CtL 71.74'Correction:

N/A _____to________

V1, NIAModule Parameters:

Callbration Records.

Erxmination Notes.Status Channel(s1 Skew Stan Offset Step Offiet _Pipe dim'ntcr

-31.03"Probe I On 1-2 +22.50 5.35" -221" ET-03-VCS-04 Circumference 97.48"Probe 2 On 3-4 -22.5? -5.35T -2.21 ET-03-VCS-04 Weld CIL- 71.74"Examination Remarks:Exmnmation Remarks:_Eaminuion from 24Q to 365"Increment

& Sean Positions Actual Recordable Indications Ann"_ _ RemarksScan No.(s) Increment Position Scan Posilion Yes No N/A

Attachment:

SaNo__ Stlat Stop Sm Stop Probe I Channel 1 0 Q 0 Eres ONo75 7130 74.80 65.00 98.94 Channel 2 0- R) 0 Furlher Evaluation Required:

_ -_Probe 2 Channel3 0 0 0Channel 4 0 E0 0 Eyes ONoProbe 3 Channel 5 [3 [0 Archive Media:Channel 6 0 0 E) 1 Emxternal Hard DriveProbe 4 Channel 7 0 0 [ 0 CD-ROMChannel 8 0 0 0 DVD-ROMAnalyst / SNT Level / Date:WILLLAMANGELL/

It/iswrp N ro e.X it" Project No. 13-1107 ET-ID-25 Date: 25-Aprl-2014 mu mw *# tm -I qw uSO I* lInWE"ED ,E M =inITiIr,.,

5"jIm Kra-. ,;I,, .. .... ...* k,,kflt.S°=mKTX. -Ma k.

S 6 363452.6 cu. In.REQUIREDVOLUME-3D3.9 cu. In.AWAY PROBEMAXIMUM $CANLIMI1I BY NOZZLE TAPERIDETAIL ASCALE 1:2VOLUME (cu. In.) PERCENTAGE CW PROBE 452.6 1 100 II tCWmppROp I A51-A I i no% IA1 1OWA-RDS PRO8E I 4u2. 1 100% iIHI 8OUTHWEST TECHNOLOGIES

.....I .. ..,Ira wNOTE;THE SAME SCANS WERE RUN OH SG-A.SG-B, AND SG-C. HOT AND COLD LEGSCOVERAGE PERCENTAGE 6 THE SAMEFOR ALL NOZZLESVC, SUMMER STEAMWGENERATOR COVERAGE REPORTa6 Y-YX 1 IHI Southwest Technologies Examination Summary RecordUfflityr South Carolina Efloc & SMte C. Summer Nudear Station Unit IGMs Outage: R-21 I Se" MM 00600SY :m steem Generator UM " C" SG Out Noz-to-SE dentiftt=Man:

1-4300A-30 (MrMNUt" QValIrtlMn, Ealn ShOWtMet.od !C Examnatlon be"t NoWe_ No. K OUMur RemarksAUT 1SWT-P I-AUT11 01 UT Prbe 1 5o.-8) 110002 26-27 X -iJTTWD & AWY ExamAUT ISwT--'I-AUTI1/210r" UT Pbe 2 (W0M 110002 26-27 X -UT TWD & AWY ExamAUT ISwT-PI--AUT 11/2/0/1 Lrr Pmbe I (BGa.vj 110001 28-30 X UT CW & CCW ExamAUT ISWT-PDlI-AUT 11r2"01 urr Probe 2 (SO.08- 110001 28-30 X UT CW & CCW ExamAET ISwT-PDI-AET3/2J0/0 Er Probe 1 ew3-vcsO-I 26- 2B; 30 X Eddy Current ExamAET ISWT.PDI-AET312,1O FT Probe 2 ETDS-VCS-01 26- 28:30 X E-ddy Current ExamAET ISwT-PDI-AET3/2/0/0 ET Probe 1 Ero3-VCS1 29 -X One eddy current surlace Indication AET ISwT-PDI-AET3/2J010 ET Probe 2 E703-VCS-O1 29 -X recorded during exnnamlion 29detahmined to be accepiable.

Examination Sunmary:This weld was examined from the Inside surface using SG-NExT.

T-Ili. & MS5800 examination equipment.

The examination was limited due to the proximity of the nozzle taper. The examination coverage was 92%.No recorda"le UT indications were detected during this examination and one eddy~current surface indication was found toto be acceptable.

Th .is Indication was located-outside the examination area in the nozzle channel head cladding.

P rep ared.By:

S t.," J T nSignabire:

EMU qD [,t)e:,*0Proia _____ ____ ____V__ReviewedByI SC'/2L/I Lintw ~ Dt:V/~I

'I .I IHI SOUTHWEST TECHNOLOGIES LTAUTOMATED ULTRASONIC EXAMINATION RECORDSite/Plant:

V.C. Sumer Unit I Weld Identification:

I.4300A-30(DM)

Pro/Rev/Chg/ICN:

ISwT-PDI-AUTI 1/2/01 Examination No.: ID-26Project No.: 13-1107 Weld

Description:

SG-"CoutNoaw-SE

((o-.t,)

Device Configuration:

136-00045 Mod.Conf.:

138-00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Tern erature OFData Acquisition Operator (s) SNT Level: Carlos H. Barberino/IT 26-Apr-14 St4r2 End Stao End______________________________________________1_

421 1451 80 80Scan Controller Parmeters Increment Axis Planned Actual Scan Axis Planned Actual Positnul'Parametem Controller SO-NExT Lower Limit 71.30 71.30 Lower Limit 0.00 0.00 Beam Direction:

Twd/AwyScan: X Rotator Drive Upper Limit 78.05 78.05 Upper Limit 50.10 50.10 Probe Type: PA22-001Increrent:

Y Axial Drive Inc. Interval (Resolution) 0.15 DCI (Scan Resolution) 0.10 S canning Speed: 2.0 inches per secondMode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 46Scan Motion: Bi-directional Radius In. 15.52" Weld C/L: 71.74"Correction:

N/A _Elevation/Nozzle C/L. N/AMaster Acquisition Fie: DMPipeID_90_AWY_270_TWDSkew.acq Calibration Records:

Examination Notes:Probe Channel /Angle(s)

Skew Scan Offset Step Otmhet Pipe Diameter 31,03"Probe I 1-(60-88-L) 900 + 70,34(in)

-1.29(in) 110002 Cirt nferncuI

=97.48"Weld Centerline

= 71.74Probe 2 2-460-88-L) 270" + 59.64(in)

-2.79(in) 110002 ExamInatIon Remarks:Probe 3 3-(0°Profilometry) 00 + 0.00(in)

-2.04(in) 110002N/A N/A NIA N/A NIA NIA1 n n nn --.... nta A.n nra1pIncrement

& Scan Positions Actual Recordable Indications Analyst RemarksScan No.(s) Increment Position Scan Position Yes No N/A

Attachment:

n .SIMI Stop Start Stop Channel 1 0 0 El_ _ _ _46 71.30 78.05 0.00 50,10 Probe I Channel 2 0l El 0 0 Yes 01 NoChanncl3 EC 0 0 Further Evaluation Channel I -0 0 Required:

Probe 2 Channel?2 f" [] n-']Charnel 3 0 Q 01 C1 Yes G NoChannel I 0 0 01 Archive Media:Probe 3 Channel 2 n r] 0lChannel 3 0 01 E] External Hard DriveChannel J 0 0Probe 4 Channel 2 Fn 0 0I CD-ROMI Chmnel 3 E D 0 DVD-ROMAnalyst I SNT Level / Dale: Je R. Deldo I 1 30 APR 2014 .NJesse R. Urdi"eQ, (a3r, III])

..)IHI IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSite/Plant:

V.C. Summer Unit I Weld ldentftication:

1-4300A-30(DM)

Pro/Rev/ChgICN:

ISwT-PDI.AUTl 1/2/0/1 Examination No.: ID-26AProject No.: 13.1107 Weld Description, so -cout (v0i SS°) Devitt Confliguration:

136-0005Mod.Cotf.:

138-00102 Scan Path Drawing:

134-00121 Exam Date Examination Tlime SurfaceTermperahtreF Data Acquisition Operator (a) I SNT Level: Carlos H. Barberinlo/T 26-Apr-14 Start End Start End1732 1804 90 80Dsa-Acqahitn.

On__________

Stan Controller Parameters Increment AxiB Planned Actual Scan Axis Planned Actual Positional Parameters Controller SG-NExT Lower Limit 71.30 71.70 Lower Limit 0.00 0.00 Benmn Direction:

Twd/AwyScan: X Rotator Drive Upper Limit 78.05 I 78.05 Upper Limit 50.10 50.10 Probe Type: PA22.001lncrmemn:

Y Axial Drive Inc. inlgrval (Resolution) 0.15 DCI (Scan Resolution) 0.10 Scaming Speed: 2.0 inches per secondMode: Automatic Scan Conversion Units Inches Conversion Units Inches Number orScans:

46Scan Motionj Bi-directional Radius In. 15.52" Weld C/L: 71.74"Correction:

N/A z EJevatiooNozzle C/L: N/AMaster Acquisition File: DMPipe ID-9O.AWY_270_TWD...Skew.acq Calibration Records:

Examination Notes:Probe Channel/Anple(s)

Skew Sean Offset Step Offset Pipe Diameter

= 31.03"probe I 1-(60-89-L) 900 + 70.34(in)

-1.29(in) 110002 Circumference

= 97.48"Weld Centerline

= 71.74Probe 2 2-(60-98-L) 270V + 59.64(1i)

-2.79(in):

110002 Examination Remarks:Probe 3 3-({0Profiiometry) 00 + 0.00(in)

-2.04(in) 110002N/A N/A N/A N/A N/A NI/ADnta Analysis:

Increment

& Scan Positions Actual Recordable Indications Analyst RemarksScan No.(s) Increment Position Scan Position Yes No N/A Atlachment:

Start Stp Stan Stop Channel 1 0 042 71.70 78.05 0.00 50.10 Probe I Channel 2 0 2 0 -Yes 2 NoChannel 3 0 0 0 Further Evaluation Channel 1 0 0 [] Required:

Probe 2 Channel 2 E) 91 17ChameJ 3 0 1] 0 0 Yes E NoChannel 1 0 0[ Archive Media:Probe 3 Channel 2 1l 0Channel 3 C0 0 El E] External Hard Drive_____ ___ _ __ __ _____ ____Channel 1 1: 01 [a_________

Probe 4 Channel 2 n 0 0 CD-ROMChannel 3 0 0 0 DVD-ROMAnalyst / SNT Level I Date: /l11/30APR2014

-IS'WY 0M No. VIrT (Rw. 1111)

IHI... fi SOUTHWEST TECHNOLOGIES IAUTOMATED ULTRASONIC EXAMINATION RECORDSiteo anl: V.C. Summer Unit i Weld Identiflcation:

I-4300A-30 (DM) Pro/Rev/Ch&/ICN:

ISwT-PDI-AUTI1/2/0/1 Ex ti No.- ID-26BPro jct No.: 13-1107 Weld

Description:

SOCOitNoz-to-SE 0.l-sv, Device Conf uration:

136-00045 Mod.Cof.:

138-00102 Scan Path Drawing 134-00121 Exm Date Examination Time Surface Temrnraturc OFData AcquisitPon Operator (s) SNT Level: Carlos H4 .Brberino)IT 26--Apr-14 Start End Start End1815 1844 go 80ScaIncrem ent & S Incea n Axc s PlRnned Actaln Scan Axis Planned Actual Positional Parameters Controller SO-NEXT Lower Limit 71.30 71.30 Lower Limit 0.DO 30.01) Beam Direction'.

Twd/AwyScan: X Rotator Drive Upper Limit 78.03 78.05 Upper Limit 50.10 50.10 Probe Type: PA22-001Increment:

Y Axial Drive Inc. interval (Resolution) 0.15 DE C (Scan Resolution) 0.)0 Scanning Speed: 2.N inchN/ pArtst,,Mode: Automatic Scan Conversion Units Inches Conversion Unils Inches Nurnber oi'Scans:

46Scan Motion: Bi-dinectiorW Radius In. 15.52" Weld CIL: 71.74'correction:

N/A Elevtion/Nozzle C/L: NIAMaster Acquisition File: DMPipe ID 90_AWY_270 TWO Skew.ecq "airto eod:Examination Notes-Probe Channel /AnRIts)

Skew Stan Offset Step Offset Pipe Diambe3 n 31.03Probe I ]-(60-88°L) 900 + 70,34(in)

-1.29(in) 110002 Circumference

-97.48"Weld Centerline

= 71.74Probe 2 2-460-88-L) 2700 + 59.64(in)

-C.-ROM110002 Probe 3 3-(0OProfilometry) 00 + 0.00(in)

-2.04(in) 110002N/A N/A N/A N/A NIA Increment

& Scan Positions Actual Recordable Indications Analyst Sa o( Increment Position Scan Position Yes No NIA

Attachment:

Start stop Stan Stop Channell C1 [] 046 71.30 78.05 30.00 50.10 Probe I Channel 2 ['] 12 0' 0- Yes 1") NoChannel 3 0] 0" ID Further Evaluation Chaagel 1 [] [ Required:

Probe 2 Channel 2 ["} Channel 3 13 0] f' Yes [] NoChum~l 1 0] 0 Archive Media:Probe 3 Channel 2 [] [0 [Channel 3 0) Q] el External "lard NyieIChannl C] LODProbe 4 Channel 2 n- [] 0][ CD-ROMChaomel 3 0 DVD-ROMAnalyst /SNT Level / Date:/ t .Jesse R. Delgado TI 1 30 APR 204 --ISW'r MeDaKNý, 50Re,. 1111). .

TIT..! IHI SOUTHWEST TECHNOLOGIES

&AA AUTOMATED ULTRASONIC EXAMINATION RECORDSite/Plant:

V.C. Summer Unit I Weld Identification:

A-4300A-30 (DM) Pro/Rev/ChOICN:

JSwT-PDI-AUT 11/2/0/1 Examination No.; ID-27Project No.: 13-1107 -Weld

Description:

tsmvwo-)

Device Configuration:

136-00045 ModLConI.:

138"00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Temperalure OFData Acquisition Operator (s) I SNT Level: Carlos H. Barbarino/IT 26-Apr-1 4 Start End Start End1456 1541 so 8D........ ... .q u is ... ...... .... -... ..... .... .++ .; ¢Scan Controller Parameters Increment Axis Planned Actual Scan Axils Planned Actual Positional Parameters Controller:

SO-NExT Lower Limit 71.30 7130 Lowr Limit 48.47 48.47 Beam Direction:

Twd/AwyScan: X Rotator Drive Upper Limit 78.05 78.05 Upper Limit 98.84 98.80 Probe Type: PA22-001Increment:

Y Axial Drive Inc. Interval (Resolution) 0.15 DCI (Scan Resolution) 0.10 Scanning Speed: 2.0 inches per secondMode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 46Scan Motion: Bi-directional Radius In. 15.52" Weld C/L: 71.74"Correcfton:

N/A ElevalionNozzle C/L: N/AMaster Acquisition File: DMPipe_ID_90_AWY_270_TWDSkaw.acq Calibration Records:

Examination Notes:Probe Channel/Angle(s)

Skew Scan Offset Step Offset Pipe Diameter 31.03"Probe I 1-(60-88-L) 900 + 70.34(in)

-1.29(in) 110002 Circumference

= 97.48'Weld Centcrline

-71.74Probe 2 2-(60-886L) 270P + 59.64(in)

-2.79(m) 110002 Examination Remarks-Probe 3 3-(0*Proiilometry) 0D + 0.00(in)

-2.04(in)

I 10002N/A N/A N/A N/A N/A N/AData Analysisincrement

& Scan Positions Actual Recordable Indications Analyst RemarksScan No.(!) Increment Position Scan Position Yes No N/A

Attachment:

Start stop Start Stop Channel 1 01 0]46 71.30 78.05 48.47 98.80 Probe I Channel 2 0 3 0 0 Yes 0 NoChannel 3 0 0 9 Further Evaluation Channel I 0 0 0 Required:

Probe 2 Chnnel 2- El .M nChannel3 0 0 0 0 Yes [ NoChannel 1 0 0 0 Archive Media:Probe 3 Channel 2 [] RChannel 3 0 El 0 External Hrd DriveChannel 1 0] 0Probe 4 Channel 2 [7l 0] 0] 0 CD-ROM_Channel 3 " 0 -0 ] DVD-ROMAnalyst / SNT Level / Date:Jesse R. Delgado/

111/30 APR 2014IS*1 OaM Nm urs 5f at. V111)

IHI" IHI SOUTHWEST TECHNOLOGIES

,,, AUTOMATED ULTRASONIC EXAMINATION RECORDSitce/Plant:

V.C. Summer Unit I Weld Identification:

I.4300A-30(DM)

Pro/Revl/Chb CN: ISwT-PDI-AUTI 1/2/01I Examination No.: ID-27AProject No.: 13.1107 Weld Descripion:

.

1u-35) Device Confi ration: 136-0004S Mod.Conf:

138-00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Tem2!ratureOF Date Acquisition Operutor (s) t SNT Level: Caruos H. Barberino/IT 26-Ap-14 Start End Start EndP555e 1613 80 s)Scan Cotroller Parameters Increment Axis Planned Actual Scan Axis Planned Actual PositionalParameters Con~troller:

SO-N&xT L.ower Limit 71.30 71.30 Lower Limit 49.47 5D.00 Scamo Damxton:

Twd/AwyScan: X Rotator Drive Upper Limit 78.05 78.05 Upper Limit 98.84 63.00 Probe Type: PA22-001Increment:

Y Axial Drive Inc. Intrvai (Resolution) 0.15 DCI (Scan Resolution) 0.1l0 Seartning Speed: 2.0 inches per secondMode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scs: 46Scan Motion: Uni-dicCional Radius In.3 15.520 Weld CEL: 71.74"Correction:

N/A El,,vaionNo.,le vu. N/AMagewrAcquisition File- DMPipeID

_90_AWY 270 TWDSkew.acq Calibration Records-Examination Notes;Probe Channel IAnkle~s)

Skew Scan Offset step Offset P0ipe Dimetr = 31.03"Probe I 1-(60-88-L) 90, + 70,34(in)

-1,29(in)

I 1002 Circumference

= 97.48"1 1 Weld Centerline

= 71.74P r/obe2 2-460-g8-L) 270° + 59.64(in)

-2.79(in) 110002 E a i ai nR m r sProbe 3 3-(00Profilometry) 0* A- 0.00(in)

-2,04(in)

I WON0N/A NWA N/A N/A M/A N/AIncrement

& Scan Positions Actual Recordable

]odicatio-s; Analyst RemarksScan No.(s) Inerement Position Scan Position Yes No N/A Attachmen::

Start stop Start Stop Channel I -1 ID46 71.30 78.05 50.00 63.00 Probe I Channel 2 0 17D 07 [ Yes B7 NoChannel 3 0" 1-1 [] Further Evaluation Channel 3 0 0 0 Required:

Probe 2 Channel 2 Q] 2 [-Channel 3 El [] ID [] Yes El NoChaAnyel

/ 0- Archive Media:Probe 3 Channel 2 0-N 13 ElCharnel 3 Q] 0I El External Hard DriveChannel I p- ['- 1"DProbe 4 -Ch~annel 2 M 2] [] 0 CD-R.OMCharmeJ 3 [ [ DVD-ROMAn nlyst ISNT L evel I Date; Je sse R. Delgado 1111I/30 APR 2014 t -'SbW'rYrolM N& UTVr,0 (Rf. 1111) 1)IHI I1I SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSits/Plant:

V.C. Summer Unit I Weld Identification:

1-4300A-30 (DM) Pro/Rev/Ch nCN: ISwT-PDI-AUTl I /2JO/ Examination No.: ID-27BProject No.: 13-1107 Weld Dewription:

ino-3m Devlce Con figuration:

136-00045 Mod.Conf.:

13"-00102 Scan Palh Drawing:

134.00121 Exam Date Examination Time Surface Temperature OFData Acquisition Operator (i) SNT Level: Carlos H. Brberino/T 26-Apr-n14 Sta rt End Start End1 16.28 1717 80 soScan Controller Param eters Inerement Axis Planned Actual Scao Axi Planned Actual Positione Parameters Controller SO-NEXT Lower Limit 71.30 71.30 Lower Limit 48.47 48.00 Beam Direction:

Twd/AwyScan: X Rotator Drive Uppe Limit 78,05 78.05 Upper Limit 98.84 98.80 Probex Type: PA22-001Incremnnt:

YAxialrDrive Inc. Interval (ResoluiohJtion) 0.10 ScanningSpeed:

2.0 inches per seconeMade: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 46Scan MotionC Uni-dir3ctional Radius In. 15,52" xWeld CDL: 71.74C~m'cio:

N/A -Bevafion/Nozzle CIL: NIAMastr Aqaiitin Pi: D Fiejlý 9AWY 70 WD kewacqExamination Notes:wCalibration Records.Probe Channel2/Aeis)

Skew Scan Offset Step OCiRetmProbe I 1 -(60-98-L) 9V ° + 70.34(in)

-1,29(in)

] 10002 Circumferenc 9 7.4 8"Weld Centerline

= 71.74Probe 2 270° + 59.64(in)-

2.79(in) 1 ]0002 EaiainRmrs Probe 3 3-(0OP mrfilometry) 0 ° + 0.00(in)

-2.04(in) 110002N/A NIA N/A N/A 7 -NIA " NIAIncrement

& Samn Positions Actual Recordable Indications Analyst RemarksSa o9 Increment Position Scan Position Yes "No N/A

Attachment:

Start Stop Stan Stop Channel 1 0 0 0D"R46 71.3D 78.05 48.0D 98.80 Probe I Chamel 2. 0] 0 [] I-1 Yes 2] NoMChannel 3 0 ] [ Further Evaluation Channel I Required:-

Probe 2 ChSNTl 2- 0e nl/atChannelJ3 es 0. 1D1 0 Yes El NoChannel F OR l .1 Archive Media:Probe 3 Channel 2 171 ElChannel 3 [] 0- TI Externa Hard DriveProbe 4 Channel 2 n [] [] [ CD-ROMChannel 3 r-0 [] [ DVO-ROMAnalyst I SNT Level I Date: JseR egd 1 0AR21ISwTrFORM N06 UTSO (RL". 1111)

IHI" IHI SOUTHWEST TECHNOLOGIES IAUTOMATED ULTRASONIC EXAMINATION RECORDSitePlant

V.C. Summer Unit I Weld Identifteation:

1-4300A-30 (DM) Y Pro/Rev/Chp/

CN: ISv/r-PDI-AUTI I/2/0/I Exmnatlon No.. ID-28Project No.: 13-1107 Weld

Description:

90-C'OuINvyz-.S1 (oý-l2S)

Device Confiuration:

136-00045 Mod.Conf.:

138-00102 Scan Path Drawinp:

134-00121 Exam Date Examination Time Surface Tem erature OFData Acquisition Operator (s) /SNT Level- Bryan Wright/11 26-Apt-14 Start End Start End0300 351 so goDat i~cu zsl oSewn Controller Parameters Increment AxiP Planno Actual ed can Axis Plan Actual Positions]

Parameters Controller:

SO-N&xT Lower Limit 71.30 71.30 Lower Limit 0.00~ 0.00 BSam Dire-ction:

Cw/CcwVScCn: X Rotator Drive Upper Limit 74.80 74.85 Upper L 0im 318 33.85 Probe Type: PA22-001Increment:

Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 0.05 Scanning Speed: 1.5 inches per secowdMode: Automatic Scan Conversion Units Inches Conversion Units Inches Number of Scans: 71Scan Motion: Bi-dbctionaC Radius en. 15.52" Weld C/L: 71.74"Conrectionl:

N/A Elevation/Noz~zle CJL: N/AMasterAeqnisition File: DM Pipý.lD-0 CW 180 CCWSkew.&cq Calibration Records:

Exeriamltien Notes;Probe Channel IAnglePs)

Skew Scan OfCset Step Oler Pipe Diam = 31.03"Probe l )-(60-88-L) 0p C 27.77(in) 2.04(in) 110001 Circumfeence

-97.48"Weld Centerline

= 71.74Probe 2 2-(60-88°L) 1 g0 0 + 37.21(in)

-2.04(in) 110001E a in to R m r sAnalyat /top SNTn Ltoe D072A 71.3 74.A 0.IA 33.8 PrbN/hnnl2 0A1 e lNScanj No.3 e P o Qa P Yes E" N/St tp S~ tpChwrmel 1 0- 0 G3 Arhv Mda72 7130 7.85 .00 3.85 Probe 3 Channel 2 [] 0 ID1[ e ] NChannel 3 13 " : ] El F ErthernEalHard rivChannel 1 1 ReuedProbe 4 2 n: El f-C-ROroe3 Channel 3 [] 0] DVDR SNT Level I Date:1W'r FORKlL N&. TIrrs (new.'JI i}

)tct.~tTdnIo§i.

IHI SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSite/Plant:

V.C. Summer Unit I Weld Identification:

1-4300A30 (DM) Pro/Rev/Chg/CN:

)Sv/r.PDI-AUTI 1/201 Examination No.: ID-29Project No.: 13-1107 Weld

Description:

Co-c-o ,-S 120.24o-s Device Conriguratlon:

136-00045 Mod.Coilf:

139-00102 Scan Path Drawing-134-00121 Exam Date Examination Time Surface Data Acquisitlon Operator (s) SNT Level: DryanWright/II 26-Apr-14 Start End Start End0425 0512' 80 80Scan Controller Parameters Increment Axis Planned Actual Scan Axis Planned Actual Positional Parameters Controller:.

SG-N&T ýLower Limit 71.30 71.3D Lower Limnit 32.50 32.50 Beam Direction:

CwlCcwSc~an: X Rotator Drive Upper Limit 74.80 74.80 Upper Limit 66.34 66.34 Probe Type: PA.22-001 Increment Y Axial Drive Inc. Interval (Resolution) 0.05 DCI (Scan Resolution) 7.05 Scanning.Sp74 1.5 inrhes per secondMode: Automnatic Scan Conversion Units Inches Conversion Units Inches N umber of Scams: 71Scan Motion: Bi-directional Radius In. 15.52" Weld CxL: 7Rmr.74"Correction:

N/A ElevationNozzle CALA NAAMaster Acquisition File; DMPipe jD 0 CW Ig0 CCW Skew.aoq Calibration Records:

Examination Notes-Probe Channel /Angles)

Skew S Pn Offset Step Offset Pipe Diameterbe 31.03"Probe I 1-(60-88-L)

O+ 27,77(in)

-2.04(in)

Circumference 97,4"Weld Centerline

= 71.74Protbt 22-(0-9-L 1Pro C 2 I WOW Exa4nai)

C RemarIncrement

& Stan Positions Actual 'Recordable Indications Analys! RemarksScn[.s ncremaeni Position Sewn Position Yes No N/A

Attachment:

caN.() Start I Stop Sion Stop Channel I El El 0]72 71.30 74.80 32.50 66.34 Probe I Channel 2 [0 [] 0 [:3 Yes El NoChannel 3 [] 0 21 Further Evaluation Channel 1 0 0 Q Required:

PAabt 2 C/anSlN2 Lv D 0tChasne 3. [lad /11 el 0 APR CD014Channel 1 [ G1 Archive Media:Probe 3 Chanel 2 E] 13Channel 3 r-I Q] 2 2 External Hard DrveChanel I n] El1 2)Probe 4 .,Choannl 2 n- El MY 0 CD-ROMChannel 3 0-- 0] [ DVD-ROM`Annalyt ISNT L.evel D ate: Jesse R, Delgado 111! 30 APR 2014 __ lfJsW~rJVoIm N.. tr so (Aý. [III1)

IH I 111 SOUTHWEST TECHNOLOGIES AUTOMATED ULTRASONIC EXAMINATION RECORDSite/Plant:

V.C, Simnmerlnil I Weld ]dentification:

1-4300A-30 (DM) ProIRev/ChRACN:

ISwT-PDI-AUTI I/20/1 Examnation No.: ID-30Proect No.; 13- 1107 Weld

Description:

so-c-oniww-s.$

(.2a-y. Devkt Configuration:

136-00045 ModCoof:

138-00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surface Temperaure OFData Acquisition Operator (s) /SNT Level: Carlos H. Barberino/IT

.26-Apr- 14 Start End Start Endii322 1355 80 80Scan Controller Parameters Increment Axis Planned Actual Scan Axis pianoe Actual Positioml Parameters Controller:

SG-NExT Lower Limit 71.30 71.30 Lower Limit 65.00 65.0D Beam Direction:

Cw/CcwScan: X Rotator Drive Upper Limit 74.80 74.80 Up0 Limit 98.84 99.D4 Probe Type, PA22-001Increment:

Y Axial Drive Inc. Interval (Resolution)

D.05 DCI (Scan Resolution) 0.05 Scanning 5peed: 1. 5 inches per secondMode: Automatic Scan Conversion Units Inches Contversion Units Inches Number of Scams: 7 1Scan Mation: li-dtrectona)

Radius In. 15.52L Weld C/L: 71.74"Correction:

NIA IblevatiodNoA CAL: N/AMaster Aequistlon File: DM_Pip_ýD 0 CW 180 CCWSkew.acq Ca libration Records:

Examination Notes:Probe Channel /Anltle{_s)

Skew Scan Offset Step Offset _Pipe 31.03"Probe I t-(60-990L) 0o + 27,77(in)-

2.04(in)"

.10001 Circarnfer-oe=

97.48"Weld Centerline

= 71.74Probe 2 2-(60-88

-L) 1 W0 + 37.2 1(in) -2.04(in) 11000 1 x m n ton R m r sNIA N/A N/A NIA N/A KIAN/A NIA N/A N/A 7 -NIA N/A._Imcrament

& Scan Positions Actual Recordable Indications Anelyst RemarksScan No.(s) Increment Position Scan Position Yes No NIA

Attachment:

Start Stop Star't Slop Channel 1 ED Q][72 71.30 74.80 65.00 98.84 Probe I Channel 2 [ a [E [ [ Yes 21 NoChannel 3 0] [] E Further Evaluation Channel 1 0' -r0 Reqtuird:

Probe 2 Channel 2 [j 91 1Channel 3 0] 1) El ] Yes NoChannel 1) 0 .[ [ Archive Media:Probe 3 Channel 2 El ED [Channel 3 [D 2 " "1 [" External Hard DriveChantnel 1 1]. El ElProbe 3 Channet 2 07 0

• 3[ CD-ROM1Channel 3 0] 0- DVD-ROMAnalyst ISNT Level D ate;JseR egao113 P16W1" 0RM Ni,6 71"MO (ReJ. 1t I ..

I H IT IHI SOUTHWEST TECHNOLOGIES AUTOMA11%D EDDY CURRENT EXAMINATION RECORDSit./Plant:

VC SUMMER UNIT I Weld Identification:

1 +'00A-&l (DM) I.

Pro/Rev/ChV/ICN' ISWT-AET-3/2/0 Examination No.; ET-ID-26Project No.. 13-1107 Weld

Description:

jOutlct Noz_-to-SafeEnd TC" Device Configuration:_

136-00045

EaiainN,

,T]D2Mod.Conf."

138-00102 Scan Path Drawing:

134-00121 Exam Date Examination Time Surace Tem perature OCData Acquisition Operator (a) / SNT Level: 26-Apr- 14 Start End Start EndWILLIAM ANGELL/II 1421 1451 63 68Data Acquisition Scan Coatroller Parameters Increment A"s Planned I Actual Scan Axis Planned Actual Positional Parameters Controller ANT Lower Limit 71.30 71.30 Lower Limit 0.00 0I00 Beam Direction:

N/AScan: X Upper Limit 78.05 71.30 Upper Limit 50.00 50.00 UT Probe Size: .39 (in)[ncrement:

Y Increment Interval 0,150 Resolution 0.020 ScanningSpeed I.S '7SECMode: Automatic Scan Conversion Counts 16000 Conversion Counts 559 Number of Scans: 46Scan Motion: Bi-directional Conversion Units Inches Conversion Units Inches Azimunth/Nmole CIL 76.03"Cotrection:

N/A _ __ EIevnon/NozJe CIL N/AModule rammeters:.

Calibration Records:

Examination Notes:Status Channel(s)

Skew Scan Offset Step Offset Pipe diameter

-31.03"Probe I On 1-2 + 22,5* 5.35" -2.2 1" ET-03-VCS-01 Circumferencc=97.48" Probe 2 On 3-4 -22.5 -5.35" -2.21" ET-03-VCS-01 Weld C/L= 76.03"Examination Remarks:E_ xamination Remarks:Examination fmor 0 to ISO"." ..,f-i,. ... -- -,. -. ... "Increment

& Scan Positions Actual Recordable Indications Analyst RemarksIncrement Position Scan Position Yes No N/A Attachment-.

PROB LIFTED UP, SEE EXAMINATION ET-ID-26R Scan No(s) Start Stop Star Stop Probe I Channel 1 0- El 0 Eles QNo46 71.30 78.05 0.00 50.00 -Channel 2 0 0 ID Further Evaluation Required:

Pfobe 2 Channel 3 0 0 0 ..Channel 4 0 0 0 E Des QNo_Probe 3 Channel 5 [] 0 Archive Media: .....Channel 6 0 0 0 0 External Hard DriveProbe 4 Channel 7 0 0 0 0 CD-ROMChannel 8 0 Q3 2 DVD-ROM_Analyst / SNT Level / Date:ISWT FORM N& ID r I'w" w Project No. 13-1107 EXAM ET-ID-26 Date: 26-ApriI-2014 Ent"I M 3 1tramn~'L*BV

~L~SWE UDwsiiI1f"

~ -__ _____U -U Ax WSm m 111H I IHI SOUTHWEST TECHNOLOGIES

...... , .. C. UNAUTOMAVED EDY CURRENT EXAMINATION RECORD'Plam VC SUMMER UNITl Weld Identifica 1DM -4t A , Pro/Rfv/ChW[CN; LSwT-AET-3/2/0 KT-ID46RProJect No.: 13-1107 Weld DertIon:

[Outlet Noz-to-Safb End "C" Device ConflruMtlon:

136-00045 138-00102 Scan Path Dr win. 134-00121 Exam Date Exmumizuion Time Surface Temperoturt CData Acquiasllon Operator (a) / SNT Level. 26-Apt-14 Start 8nd Start LadWILLIAM ANGELL/ nl 1732 1304 68 68Data Acquisition Scan Controller Panamrtau Increrni Axis Planned Actl Scan Axis Planned Actual PosElonal Parameter Controlkr.

ANT 5M Limk 71.30 71.30 Loew Lirmit 0.00 0,00 Beam Direction:

N/AScan: X Uppe Limit 73.05 71.30 Upper Umi 50,00 50.00 ET Probe Si7e: .38 (in)Inmemcnt Y Increment Interval 0.1 50 Resolution 0.020 Scanning Speed Ll I/SCMode. Automatic Scan Conversion Counts 16000 Conversion Counts 558.54 Number of Scans: 46Scan Motion: Bi-dircotional Convmion Units Inches Convesion Units Inches AzimnAh/No=lcC/L 76.03Correction:

N/A El__ov___No__leCL N/AModule Parameters:

Calibration Records:

Blateirtaion Notes:8Mtw Clhnnel(a)

Skew Scan Offset Stepoffset

_Pipe diameat -31.031Probe I On 1-2 +22.5, 5.35* -2.2 1" ST-003-VCS-01 Circunfrenc

= 97.4rProbe 2 on 3-4 -22.5 -5.5" -2.21" ET-003-VCS-01 Weld C/L- 76.03"Usm~natio ew lrnksm_Examation Rearks:__Ernamtion from 0 to 180"._nrccote

& Soan Positions Actal Recordable Indications Analyst RemarksScan No.(s) nme-it Position Scan Yes No N/A

Attachment:

__an s Stop Sht Stop Prob I Channel 1 0 0 0 (Yes ___No46 71.30 79.05 0.00 50.00 Channel 2 0 [3 0 Forler Evaluation Requbed:Probe2 Channel23 0 2 0Channel4 0 0 0 Or'es SNoProbe3 Channel5 0 0 0 AmjhiveMedia:

Channel 6 0 0 ] 0 External Hard iveProbe 4 CheniU 7 0. 0 01 0 CD-ROMChannel 8 O____0_ DVD-RO___

nrmlyst/

S Level I Date:WILLIAM ANGRLI, I II /B low' No.m I,'T lemI Project No. 13-1107EXAM ET-ID-26R D~ate: 26-April-2014

,aidUIE0U-

"t0 oe wwfi'i~m~l--a I IF-I 1111 SOUTHWEST TECHNOLOGIES AUTOMATMD EDDY CURRENT EXAMINATION RECORDSite/Plaint:

VC SUMMER UNIT I Weld ldeutlatlont,,

I Ai.4 A al (DM) ] L. Pr&Rev/CbWICN:

iSwT-AET-3r2M0 Examination No.: .T-ID-27Project No.: 13-1107 iWeld Dwrlption; iOutlet Noz.-o-Saft End "C" Device Configuration:

136-00045 Mod.Conf.:

138-00102 Scar Pith Drawing:

134-00121 Exam Date Exominution Time Surface Tent erature OCData Aequisition Operator (s) I SNT Level: 26-Ap¢-14 Start End Start EndWILLIAM ANGELL / --1456 1541 68 68Data Acquisition Scea Controller Parameters Increment Axis Planned Actual Stan Axis Plaooned Actual Positional Parameters Controller.

ANT Lower Limit 71.30 71.30- Lower Limit 48.47 48A7 Boem Direction:

N/AScan: X Uppe Litrn 78.05 73.05 Upper Limit 9..84 1 8.34 E"T Probe Size: ,38 (in)Inremenc Y Increment Interval 0.150 Resolution 0.020 Scaning Speed 0 5 ,16CMode: Automatic Scan Conversion Counts 16000 Conversion Counts 558.54 Number of Scans: 46Scan Motion: Bi-directional Conversion Units Inches Conversion Units Inches Amunth/tioz CIL 76.03'orrection:

N/A ______ _ C/I. N/AModule Parameters:

Calibration Records:

Examination Notes:Status Chanoel(s)

Skew Scan Offset Step Pipe diameter

-31,03"Probe I on 1-2 +22.50 5.35" -2.21" ET-003-VCS-Oi Circumference-97.48" Probe 2 On 3-4 -22.5 -5.35" -2.21" ET-003-VCS-0I Weld C/L- 76.03"Examlna tion Remarks:Exreinatmon Remeaft:Examination from i80 to 3W0.Increment

&Seai Poatioas Actual Recordable Indications Analyst RemarksSInremet Position Scan Position Yes -No -N/A

Attachment:

scan o.(s) Channel 1 0 ) 0 EYes 0 No46 71.30 78.05 48.47 98.84 Channel 2 0 0. 0 Further Evaluation Required:

probe2 Channel 3 0" 0 0-Channel 4 0 0 0l Ores ON_,,,,_Probe 3 Channel 5 0 0 E9 Archive MediaChannel 6 0 0 0 0 External Hard DriveProbe 4 Channel 7 0 0 CD-ROMChannel 8 0 (] 0 DVD-ROMAnalyst / SNT Level / Dale:WILLIAM ANGELL/I It/ 4 ~ > ~ ?~IsWT FORMM ,t"1 IN"/

Project No. 13-1107EXAM ET-ID-27Date: 26-April-2014 Ff, tsnoMW"ýum vw n.it. " A A A PR- '9#Uem9gE..~

~.I.I~-g ~ ~lMlwIwU1*IIa-TT-TT IR SOUTHWEST TECHNOLOGIES

.. -... 1........

AUTOMAtD EDDY CURRENT EXAMINATION RECORDSite/Plant.-

VC SUMMER UNIT I Weld Ideatlflcatlos'.A U.-4400"-N (DM) 1-t;CA -DrfZ Pre/Rev/ChgflCN:

ISwT-AET-3a2/0 Examinaton No.: ET-ID-28Projetct No.: 13-1107 Weld Deseelpfloit:

tOugtle Nom..o-sef End "C"w Device Configuraiton:

136-00045 ModCoant 13"00102 Scan Path Drawln: 134-00121 Exam Date I Examination Time SurfaceTemrperatureC Dat Acquisition Operator (s)/ SNT Level: 26-Ap-14 Start End Start EndKARLSHAFWIR/I1 0300 0349 68 68Data Acquisition Scan Controller Parameters Increment Axis Planaed Actual Stan Axis Planned Actual Posillional Parameters

Coatmlle, ANT Lower Limit 71.30 71.30 Lower Limit 0.00 0.00 Beam Direction:

N/AScan: x upper Limit 74.80 74.80 Upper Limit 33.85 33.35 l'T Probe Size: .38 (m)Increment:

Y Increment Interval 0.050 Resolution 0.020 Scanning Speed 1.5 ISECMode: Automatic Scan Conversion Counts 16000 Conversion Counts 553.54 Number ofScans:

71Scan Motion: Bi-directional Conversion Units inches Conversion units Inches AzimuvmtWNozak C/L 76.03'Correction:

N/A _Jeyujl0zJ C/L WAModule Parameters:

Calibration Records:

Examination Notes:Status Channls)

Skew Scan Offset Step Ofi Pibp diameter

-31,D3"Probe I On 1-2 +22.50 5.36" -2.21J" ET-03-VCS-01 Circumference

-97.48'Probe 2 On 3-4 -22.50 -5.35W -2.2 1 ET-03-VCS-01 Weld CAL- 76.03'Ere mlruation Remarks:Examinaion Remarks:Exanxnioft from 0 to MO.Increment

& Scan Positlons Actual Recordable Indications

-_Analyst RemarksScan No.(s) InClemen Position Scan Position Yes No N/A Attachmen.:

PROBE I WAS LIFTED OFF. AREA COVERED BYStart Stop Staru Stop Probe I Channel 1 13 C) 11 EWes (2) No BY EXAMINATION

1. ET-ID-2675 71.30 74.80 0.00 33.85 -Channel 2 0 0 0 Further Evaluation Required:

Probe2 Channel3 0 0, 0[Channel4 D 0 0 Ores ONoProbe 3 Channel 5 0 0 0 Archive Media:Channeot 0 0 @ @ External Hard DriveProbe 4 Channel 7 0 0 0 0 CD-ROMChannel 8 0 0 0 DVD-ROMAnalyst / SNT Level / Date:WILLIAM ANGELL/ 11 / ý ~ AW5/N. i 100, /

Project No. 13-1107 EXAM ET-ID-28 Date: 26-April-2014 LOcs== =m an -t_ U-, ?, ..I Ak A MII SOUTHWEST TECHNOLOGIES AUTOMATD EDDY CURRENT EXAMINATION RECORDSltelplant:

VC SUMMER UNIT I Weld Idenffll limon:, ,,(DM)I-A- Prr/ReV/

IC0N: LSWT-AET-3/E a :Project No.: 13-1107 Weld

Description:

I Outlet Noz.-1-Saf End "C" ievice Coa fllurdon:

136-00045ton No.: ET-D-29Mod.Conf.:

138-00102 Scan Path Drawing; 134-00121, sum Date 9gminiontlon Time Surface Temperature Data Acquisition Operator (s) / SNT Level: N -SlI End Start dndKARL SIAFFL Ill I- -0415 0515 68 69Data Acquisition Scan Controller Parameters Increment Axls Planned Actual Sean Atis Planned Actual Poastional Parameters Controllem.

ANT Lower Limit 71.30 71.30 Lower Limit 32.30 32.50 Beam Direction:

N/AScan: X Upper Limit 74.30 74.80 Upper Limit 66.34 66.34 ET Probe Size: 38 (in)lcrerment:

Y Inhcirment Interval 0.050 Resolution 0.020 Scanning Speed L5s ,secMode: Automatic Scan Conversion Counts 16000 Conversion Counts 5S8.00 Number of Scans: 71Scam Motion: Bi-directional Conversiom Units Inches Conversion Units Inches AzImwAWth zzle C/L 76.03"Correction:

N/A El-vatiou ule C/IL N/AModule Parameters:

Calibration Records:

I1xamlomtlou Notes:Status Chasinec(s)

Skew Sean Offset Step Offset Pip diamete -31.03"Probe I On 1-2 +22.50 5.35" -2.210 ET-03-VCS-01 Ciwumnforene"-97.48" Probe 2 On 3-4 -22.50 -5.35" -2.21" ET-03-VCS-01 Weld C/LA 76.03"Examination Remarks:Examination Remarks:Examination firm 120 to 24?*,Increment

& Scan Positlons Actual Recordable Indckttlons Analyst RemarkScan No.(s) Incremem Position Scan Position Yes No N/A

Attachment:

INDICATION AT "X" OF70.15 AND 'Y" OF 69.29 WITH LENTHScan Start stop Start Sop Probe I Channel 1 0 0 0 pnYes rn No OF 0.38 INCHES, SURFACE INDICATION 75 71.30 74.80 32.50 66.34 Channel2 p) [ [] Further Evaluation Kequird:Prbe 2 Channel 3 ] ajChannel 4 0 [] ) 0 -'es n, NoP.o_ 3 Channel 5 o o (D Archite Media:Channel 6 0"9 0 (" E External Hard DriveProbe4 Channel7

-o E- 0 CD-ROMChoann 8 -3 ........

DVD-ROMlysi /SNTLevel/Date:

WILLIAM ANGELL / It/sswTr No, r tlow-( "" t r

/ I )Project No. 13-1107EXAM ET-ID-29Date: 26-Aprik2014 WW1I ON".MWNWA tjfg 3*E"W-STOmUMIJIM~u14-40 -a Project No. 13-1107EXAM ET-ID-29Date: 26-Aprl-2014 S£1O4wijku~s I

Project No. 13-1107EXAM ET-ID-29Date: 26-April-2014

_ SlIjjFO oiiira 4-7 jOWIi.; -gp'n~m____ ____ ____ Kft-, 4--ka P~p0.~1.at

)IT {I i111 SOUTHWEST TECHNOLOGIES

.AUTOMATD EDDY CURRENT EXAMINATION RECORDSitelplant:

VC SUMMER UNIT I Weld Identlflentlon:-A, 4 (DM) .'/'Pro/RevlCbh/ICN:

ISwT-AET-3r2/0

_ Examination No.: ET-ID-30Project No.: 13-1107 Weld

Description:

1Outlet NoL .to-Safe End "C" Device Configuralion:

136-00045 Mod.CoSL:

133-00102 Scan Path Drawlng.

134-00121

.Examt Date .Examlnation Time Surfaee Temperature 9CData Acquisition Operator (s) f SNT Level: 26-Apr-14 Start End Start LedWILLIAM ANGELL/ 11 1322 1355 63Data Acquisition Scan Controller Parameter,

[lurement AxIs Planned Actual Scan Axis Planned Atetal Posltional Parameters C oller: ANT Lower Limit 71.30 71.30 Lower Limit 65.00 65.00 Beam Direction:

N/AScan: X Upper Limit 74.10 74.90 Uypg Limit 918.4 98,84 ET Probe Size: .31 (in)Increment:

Y Increment Inturval 0.050 Rcsolution 0.020 ScanningSpeed 1.s "ISECMode: Automatic Scan Conversion CoUnts 16000 Conversion Counts 553.00 Number of Scans: 71Scan Motion: Bi-directional conversion Units Inches Conversion Units Inches Azlmunf/WNozze CML 76.03'Corrction:

N/A Elevation/Nozzke Cn N/AModule Parameters, Calibration Records:

Examination Notes:Status Channel(s)

Skew Scan Offset Step Offset Pipe diameer w 31.03"Probe I On 1-2 +-22.5, 5.35" -2.21" ET-03,VCS-01 Circumfrence

= 97.48"Probe 2 On 3-4 -22.5' -5.35" -2.21" ET-03-VCS-0I Weld C/L= 76.03"1355Examination Remarks:Examination Remarks:_Examnation from 240 to 365'.Increment

& Scan Positions Actual Recordable Indlrallosft Anan"a RemarksIncremet Position Scan Position Yes No N/A Attachrent:

San No.(s) start Stop Start Stop Probe I Channell 1 re 0- 0 OYes 0 No75 71.30 74.80 65.00 98.84 Channel 2 0 0 E] 0 Funher Evaluation Required:

Probe2 Channel3 0 0 0lChannel 4 0 0] 0 D Yes 0 NoProbe 3 Channel 5 0 0 0 Archive Media:Channel 6 [I 0 0 0 External Hard Drive __Probe Channel 7 E Q0 0 CD-ROMChannel B 0 0 0 DVD-ROMW IAn Mat/ SlT Level / Date:WILL"4MANGELL/

11/IswrIVUN NY .rT low/ I

)Project No. 13-1107 EXAM ET-JED-30 Date: 26-April-2014 WWI baf A4 ~Ix _47j'5 ht. I