ML17206A039: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (StriderTol Bot change) |
||
| (4 intermediate revisions by the same user not shown) | |||
| Line 11: | Line 11: | ||
| contact person = | | contact person = | ||
| case reference number = 52852 | | case reference number = 52852 | ||
| document type = Deficiency Correspondence (per 10CFR50.55e and Part 21) | | document type = Deficiency Correspondence (per 10CFR50.55e and Part 21) Deficiency Report (per 10CFR50.55e and Part 21) | ||
| page count = 2 | | page count = 2 | ||
}} | }} | ||
=Text= | =Text= | ||
{{#Wiki_filter:0711312017 U.S. Nuclear Regulatory Commission Operations Center Event Report Pagel Part 21 (PAR) Event# 52852 Rep Org: CURTISS WRIGHT Notification Date I Time: 07/13/2017 15:39 (EDT) Supplier: | {{#Wiki_filter:0711312017 U.S. Nuclear Regulatory Commission Operations Center Event Report Pagel Part 21 (PAR) | ||
NOVA MACHINE PRODUCTS Event Date I Time: 07/13/2017 (EDT) Last Modification: | Event# | ||
07/13/2017 Region: 3 Docket#: | 52852 Rep Org: CURTISS WRIGHT Notification Date I Time: 07/13/2017 15:39 (EDT) | ||
City: MIDDLEBURG HEIGHTS Agreement State: Yes County: . License#: | Supplier: NOVA MACHINE PRODUCTS Event Date I Time: 07/13/2017 (EDT) | ||
State: OH NRC Notified by: FRANK FURFARI Notifications: | Last Modification: 07/13/2017 Region: 3 Docket#: | ||
ANTHONY DIMITRIADIS HQ Ops Officer: | City: MIDDLEBURG HEIGHTS Agreement State: | ||
DONG HWA PARK PART 21/50.55 REACTORS. | Yes County: | ||
. License#: | |||
State: OH NRC Notified by: FRANK FURFARI Notifications: ANTHONY DIMITRIADIS HQ Ops Officer: DONG HWA PARK PART 21/50.55 REACTORS. | |||
Emergency Class: NON EMERGENCY 10 CFR Section: | Emergency Class: NON EMERGENCY 10 CFR Section: | ||
21.21 (d)(3)(i) | 21.21 (d)(3)(i) | ||
DEFECTS AND NONCOMPLIANCE PART 21-HEX CAP SCREWS PRODUCED WITH PRE-EXISTING CRACKS The following was submitted by the licensee via facsimile: | DEFECTS AND NONCOMPLIANCE PART 21-HEX CAP SCREWS PRODUCED WITH PRE-EXISTING CRACKS The following was submitted by the licensee via facsimile: | ||
"This Part 21 initial notification is being submitted pursuant to the requirements of 1 OCFR21.21 (d)(3)(i). | "This Part 21 initial notification is being submitted pursuant to the requirements of 1 OCFR21.21 (d)(3)(i). | ||
R1DO EMAIL "Initial Notification for Hex Cap Screws produced from one heat of material | R1DO EMAIL "Initial Notification for Hex Cap Screws produced from one heat of material - Nova Machine Products Fastener Part Numbers BPRT.008227.30, BPRT.008468.30, and BPRT.008342.30. | ||
-Nova Machine Products Fastener Part Numbers BPRT.008227.30, BPRT.008468.30, and BPRT.008342.30. | |||
"This Part 21 initial notification addresses Nova Machine Products hex cap screws which contain pre-existing cracks as a result of a manufacturing process error (Forged blanks were rapidly cooled after forging instead of air cooled). | "This Part 21 initial notification addresses Nova Machine Products hex cap screws which contain pre-existing cracks as a result of a manufacturing process error (Forged blanks were rapidly cooled after forging instead of air cooled). | ||
"The fasteners in question were all produced from one heat of material, which was used tb produce one blank size, which was then used to produce the three hex cap screw part numbers stated above. "Fasteners were only supplied to Exelon TMI and Exelon Peach Bottom and are isolated to one heat of material and one manufacturing run. Containment actions are already underway with Exelon and Nova Machine. | "The fasteners in question were all produced from one heat of material, which was used tb produce one blank size, which was then used to produce the three hex cap screw part numbers stated above. | ||
"Fasteners were only supplied to Exelon TMI and Exelon Peach Bottom and are isolated to one heat of material and one manufacturing run. Containment actions are already underway with Exelon and Nova Machine. | |||
"Nova Machine and Exelon have been and continue to be in communication on this matter. This appears to be an isolated instance. | "Nova Machine and Exelon have been and continue to be in communication on this matter. This appears to be an isolated instance. | ||
"If there are any questions pertaining to this communication, please contact Frank | "If there are any questions pertaining to this communication, please contact Frank Furfari, Sr. Quality Assurance Manager at 216-898-8394." | ||
From: | |||
From: Nova Machine l'roducts US Nuclear Regulatory Commission Document Control Desk Washington, DC 20555-0001 07/13/2017 15:34 #402 P. 001/ 001 Nuclear Division 18001 Sheldon Road Middleburg | Nova Machine l'roducts US Nuclear Regulatory Commission Document Control Desk Washington, DC 20555-0001 07/13/2017 15:34 | ||
#402 P. 001/ 001 Nuclear Division 18001 Sheldon Road Middleburg Heights, OH 44130 T: 216.267.3200 www.curtisswright.com/N uclearDivision July 13, 2017 | |||
==SUBJECT:== | ==SUBJECT:== | ||
This Part 21 initial notification is being submitted pursuant to the requirements of 10CFR21.21 (d)(3)(i). | This Part 21 initial notification is being submitted pursuant to the requirements of 10CFR21.21 (d)(3)(i). | ||
Initial Notification for Hex Cap Screws produced from one heat of material | Initial Notification for Hex Cap Screws produced from one heat of material - Nova Machine Products Fastener Part Numbers BPRT.008227.30, BPRT.008468.30, and BPRT.008342.30. | ||
-Nova Machine Products Fastener Part Numbers BPRT.008227.30, BPRT.008468.30, and BPRT.008342.30. | |||
This Part 21 initial notification addresses Nova Machine Products hex cap screws which contain pre-existing cracks as a result of a manufacturing process error (Forged blanks were rapidly cooled after forging instead of air cooled). | This Part 21 initial notification addresses Nova Machine Products hex cap screws which contain pre-existing cracks as a result of a manufacturing process error (Forged blanks were rapidly cooled after forging instead of air cooled). | ||
The fasteners in question were all produced from one heat of material, which was used to produce one blank size, which was then used to produce the three hex cap screw part numbers stated above. Fasteners were only supplied to Exelon TMI and Exelon Peach Bottom and are isolated to one heat of material and one manufacturing run. Containment actions are already underway with Exelon and Nova Machine. | The fasteners in question were all produced from one heat of material, which was used to produce one blank size, which was then used to produce the three hex cap screw part numbers stated above. | ||
Fasteners were only supplied to Exelon TMI and Exelon Peach Bottom and are isolated to one heat of material and one manufacturing run. Containment actions are already underway with Exelon and Nova Machine. | |||
Nova Machine and Exelon have been and continue to be in communication on this matter. This appears to be an isolated instance. | Nova Machine and Exelon have been and continue to be in communication on this matter. This appears to be an isolated instance. | ||
If there are any questions pertaining to this communication, please contact Frank Furfari, Sr. Quality Assurance Manager at 216-898-8394. | If there are any questions pertaining to this communication, please contact Frank Furfari, Sr. | ||
Written Notification to follow. Yours sincerely, | Quality Assurance Manager at 216-898-8394. | ||
_.//)"h 7iA-. I \...- | Written Notification to follow. | ||
Yours sincerely, | |||
"./~ | |||
_.//)"h 7iA-. I | |||
\\...- | |||
Frank Furfari Sr. Quality Assurance Manag~r Nova Machine Products}} | |||
Latest revision as of 16:40, 8 January 2025
| ML17206A039 | |
| Person / Time | |
|---|---|
| Site: | Crane, Peach Bottom  |
| Issue date: | 07/13/2017 |
| From: | Furfari F Curtiss-Wright Nuclear Division, NOVA Machine Products Corp |
| To: | Document Control Desk, Office of Nuclear Reactor Regulation |
| References | |
| 52852 | |
| Download: ML17206A039 (2) | |
Text
0711312017 U.S. Nuclear Regulatory Commission Operations Center Event Report Pagel Part 21 (PAR)
Event#
52852 Rep Org: CURTISS WRIGHT Notification Date I Time: 07/13/2017 15:39 (EDT)
Supplier: NOVA MACHINE PRODUCTS Event Date I Time: 07/13/2017 (EDT)
Last Modification: 07/13/2017 Region: 3 Docket#:
City: MIDDLEBURG HEIGHTS Agreement State:
Yes County:
. License#:
State: OH NRC Notified by: FRANK FURFARI Notifications: ANTHONY DIMITRIADIS HQ Ops Officer: DONG HWA PARK PART 21/50.55 REACTORS.
Emergency Class: NON EMERGENCY 10 CFR Section:
21.21 (d)(3)(i)
DEFECTS AND NONCOMPLIANCE PART 21-HEX CAP SCREWS PRODUCED WITH PRE-EXISTING CRACKS The following was submitted by the licensee via facsimile:
"This Part 21 initial notification is being submitted pursuant to the requirements of 1 OCFR21.21 (d)(3)(i).
R1DO EMAIL "Initial Notification for Hex Cap Screws produced from one heat of material - Nova Machine Products Fastener Part Numbers BPRT.008227.30, BPRT.008468.30, and BPRT.008342.30.
"This Part 21 initial notification addresses Nova Machine Products hex cap screws which contain pre-existing cracks as a result of a manufacturing process error (Forged blanks were rapidly cooled after forging instead of air cooled).
"The fasteners in question were all produced from one heat of material, which was used tb produce one blank size, which was then used to produce the three hex cap screw part numbers stated above.
"Fasteners were only supplied to Exelon TMI and Exelon Peach Bottom and are isolated to one heat of material and one manufacturing run. Containment actions are already underway with Exelon and Nova Machine.
"Nova Machine and Exelon have been and continue to be in communication on this matter. This appears to be an isolated instance.
"If there are any questions pertaining to this communication, please contact Frank Furfari, Sr. Quality Assurance Manager at 216-898-8394."
From:
Nova Machine l'roducts US Nuclear Regulatory Commission Document Control Desk Washington, DC 20555-0001 07/13/2017 15:34
- 402 P. 001/ 001 Nuclear Division 18001 Sheldon Road Middleburg Heights, OH 44130 T: 216.267.3200 www.curtisswright.com/N uclearDivision July 13, 2017
SUBJECT:
This Part 21 initial notification is being submitted pursuant to the requirements of 10CFR21.21 (d)(3)(i).
Initial Notification for Hex Cap Screws produced from one heat of material - Nova Machine Products Fastener Part Numbers BPRT.008227.30, BPRT.008468.30, and BPRT.008342.30.
This Part 21 initial notification addresses Nova Machine Products hex cap screws which contain pre-existing cracks as a result of a manufacturing process error (Forged blanks were rapidly cooled after forging instead of air cooled).
The fasteners in question were all produced from one heat of material, which was used to produce one blank size, which was then used to produce the three hex cap screw part numbers stated above.
Fasteners were only supplied to Exelon TMI and Exelon Peach Bottom and are isolated to one heat of material and one manufacturing run. Containment actions are already underway with Exelon and Nova Machine.
Nova Machine and Exelon have been and continue to be in communication on this matter. This appears to be an isolated instance.
If there are any questions pertaining to this communication, please contact Frank Furfari, Sr.
Quality Assurance Manager at 216-898-8394.
Written Notification to follow.
Yours sincerely,
"./~
_.//)"h 7iA-. I
\\...-
Frank Furfari Sr. Quality Assurance Manag~r Nova Machine Products