ML19323A851: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (StriderTol Bot change) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 14: | Line 14: | ||
| document type = TECHNICAL SPECIFICATIONS, TECHNICAL SPECIFICATIONS & TEST REPORTS | | document type = TECHNICAL SPECIFICATIONS, TECHNICAL SPECIFICATIONS & TEST REPORTS | ||
| page count = 1 | | page count = 1 | ||
| project = | |||
| stage = Other | |||
}} | }} | ||
=Text= | =Text= | ||
{{#Wiki_filter: | {{#Wiki_filter:. | ||
.:lI- | |||
~ | ~ | ||
, no3 oei \\])Ao ' | |||
~ | |||
() | () | ||
Applies to the instrumentation | 3.1 LIMITING CONDITION FOR OPERATION 4.1 SURVEILLANCE REQUIREMENTS 3.1 REACTOR PROTECTION SYSTEM REACTOR PROTECTION SYSTEM Applicability: | ||
Applicability: | |||
Objective: | Applies to the instrumentation Applies to the surveillance of | ||
To assure the operability of the | - and associated devices which the instrumentation and associ-initiate a reactor scram, ated devices which initiate re-actor scram. | ||
Specification: | Objective: | ||
The setpoints, minimum number of | Objective: | ||
not exceed 50 milli-seconds. | To assure the operability of the To specify the type and frequency reactor protection system, of surveillance to be applied to the protection instrumentation. | ||
Specification: | |||
Specification: | |||
The setpoints, minimum number of A. | |||
Instrumentation systems shall trip systems, and minimum number be functionally tested and of instrument channels that must calibrated as indicated in be operable for each position of Tables 4.1.1 and 4.1.2 re-the reactor mode switch shall be spectively, as given in Table 3.1.1. | |||
The system response times from the B. | |||
Daily during reactor power opening of the sensor contact up operation, the peak heat to and including the opening of flux and peaking factor shall the trip actuator contacts shall be checked. | |||
not exceed 50 milli-seconds. | |||
t 26 | t 26 | ||
.}} | |||
Latest revision as of 23:51, 31 December 2024
| ML19323A851 | |
| Person / Time | |
|---|---|
| Site: | Pilgrim |
| Issue date: | 04/24/1980 |
| From: | BOSTON EDISON CO. |
| To: | |
| Shared Package | |
| ML19323A850 | List: |
| References | |
| NUDOCS 8005060136 | |
| Download: ML19323A851 (1) | |
Text
.
.:lI-
~
, no3 oei \\])Ao '
~
()
3.1 LIMITING CONDITION FOR OPERATION 4.1 SURVEILLANCE REQUIREMENTS 3.1 REACTOR PROTECTION SYSTEM REACTOR PROTECTION SYSTEM Applicability:
Applicability:
Applies to the instrumentation Applies to the surveillance of
- and associated devices which the instrumentation and associ-initiate a reactor scram, ated devices which initiate re-actor scram.
Objective:
Objective:
To assure the operability of the To specify the type and frequency reactor protection system, of surveillance to be applied to the protection instrumentation.
Specification:
Specification:
The setpoints, minimum number of A.
Instrumentation systems shall trip systems, and minimum number be functionally tested and of instrument channels that must calibrated as indicated in be operable for each position of Tables 4.1.1 and 4.1.2 re-the reactor mode switch shall be spectively, as given in Table 3.1.1.
The system response times from the B.
Daily during reactor power opening of the sensor contact up operation, the peak heat to and including the opening of flux and peaking factor shall the trip actuator contacts shall be checked.
not exceed 50 milli-seconds.
t 26
.