ML13162A072

1457690303-R-M-00003-0, NTTF 2.3 Seismic Peer Review Report

ML13162A072
Person / Time
Site:	Catawba
Issue date:	11/18/2012
From:	Baughman P Stone & Webster, ARES Corp
To:	Duke Energy Carolinas, Office of Nuclear Reactor Regulation
References
1-157690303 1457690303-R-M-00003-0
Download: ML13162A072 (118)

Text

webstl.,ne. Ou No,: I.4576903 03 -M0 3-.

~~RviT E'I"NE[CHIAL REPORI"I Client: Duke Ener'gv. Catawba Units I and 2)

CATAWBA NUCLEAR STATION UNITS .1AND 2 Prepared fir:

Duke Energy Carolinas, L.LC Prepared by: Stone & Webster, Inc. and ARES Corporation November 18, 2012 QA CATEGORY III 11/18/2012 PerRviewer: P1aul D. llau~unan. P i D)ate ARES Corporation Date ARES Approval: CMI. Coiiselnian Dt Pleer Reviewer: George Bushnell. P.E.

Project Manager Shaw Powe'r I11/18/2012 11/18/2012 Peer Reviewer: Robert Keiser, PE.

haw ova: Anhony R. Fazio l)ate Date Duke Energy Mrjct*anager

© 2012 by Stone & Webster, Inc. All rights reserved.

r r,N,Airn1sNý Sh C 0rl P 0 R AT 10,^,,'

aworld of Solutions' CNC-1206.03-00-0203 Rev 0 Attachment 6A Page I of 37

NTTF 2.3 SEISMIC PEER REVIEW REPORT Report No. 1457690303-R-M-00003, Rev. 0 CATAWBA- NJCLEAR-STATION-UNITS I AND-2 November 2012 Table of Contents 1.0 IN TRO D UCTION ................................................................................................................... I 2.0 SCO PE ............................................................................................................................................. 1 3.0 M ETHOD O LO G Y ................................................................................................................ I 4.0 PERSONN EL .................................................................................................................................. 2 5.0 SELECTION OF THE SSCs INCLUDED ON THE SWEL .................................................... 3 6.0 SEISMIC WALKDOWNS AND AREA WALK-BYS ............................................................. 5 7.0 LICEN SIN G BA SIS REV IEW S ................................................................................................ 8 8.0 DECISIONS ON ENTERING POTENTIALLY ADVERSE SEISMIC CONDITIONS IN TO THE CA P PRO CESS ........................................................................................................ 9 9.0 SU BM ITTA L REPO RT ............................................................................................................. 9 10.0 CON CLU SION S............................................................................................................................ 10 11.0 REFEREN CES .............................................................................................................................. 10 Appendices Appendix A: Peer Review Checklist for In-Process SW EL ............................................................. 4 Pages Appendix B: Peer Review Checklist for Final SW EL ...................................................................... 5 Pages Appendix C: Summary of Peer Review of In-Process SWCs and AWCs ........................................ 6 Pages Appendix D: Summary of Peer Review of Final SWCs and AWCs ................................................ 8 Pages Page iii CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 3 of 37

NTTF 2.3 SEISMIC_ PEER REVIEW REPORT Report No. 1457690303-R-M-00003, Rev. 0 CATAWBA NUCLEAR STATION UNITS I AND 2 . .. . .. . NbvembeF2012

1.0 INTRODUCTION

Electric Power Research Institute (EPRI) Report 1025286, Seismic Walkdown Guidancefor Resolution of Fukushima Near-Term Task Force Recommendation 2.3.' Seismic, was issued in 3une 2012. This document provides guidance and procedures to perform seismic walkdowns as required by the U.S. Nuclear Regulatory Commission's (NRC's) 50.54(0 letter regarding Near-Term Task Force (NTTF) Recommendation 2.3: Seismic. The EPRI guidance covers selection of personnel; selection of a sample of structures, systems, and components (SSCs) that represent diversity of component types and ensures inclusion of components from critical systems/functions; conduct of the walkdowns; evaluation of potentially adverse conditions against the plant seismic licensing basis; peer review;.Individual Plant Examination of External Events (IPEEE) vulnerabilities; and reporting requirements. It was intended that all U.S. nuclear power plants utilize this guidance document in meeting the requirements of the NRC 50.54(f) letter.

Duke Energy (Duke) contracted with the Shaw Group (Shaw) / ARES Corporation (ARES) Team to perform the NTTF 2.3 peer review at the Catawba Nuclear Station (CNS). This report documents that peer review.

2.0 SCOPE The scope of this effort was to perform the NTTF 2.3 Seismic Peer Review at CNS, in accordance with the guidelines in Section 6, Peer Review, of EPRI 1025286. The peer review is to be documented in a submittal report as discussed in Section 8, Submittal Report, of EPRI 1025286. It is intended that the information contained herein will be utilized by Duke as part of its overall NTTF 2.3 submittal report to be delivered to the NRC in November 2012.

Per Section 6 of EPRI 1025286, the peer review should cover the following:

• Review the selection of the SSCs included on the Seismic Walkdown Equipment List (SWEL).

" Review a sample of the checklists prepared for the seismic walkdowns and area walk-bys.

" Review the licensing basis evaluations.

• Review the decisions for entering the potentially adverse conditions in the Corrective Action Program (CAP) process.

• Review the submittal report.

" Summarize the results of the peer review process.

3.0 METHODOLOGY The Shaw/ARES methodology conforms to the guidance in Section 6 of EPRI 1025286. The Peer Review Team consisted of three individuals, all of whom have seismic engineering experience as it hv Shiawo( @ 9 Page I CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 5 of 37

NTTF 2.3 SEISMIC PEER REVIEW REPORT Report No. 1457690303-R-M-00003, Rev. 0 CATAWBA NUCLEAR STATION UNITS I AND 2 November 2012 received training as a SQUG SCE and was involved with the SQUG effort at Oconee and the IPEEE efforts at all three stations.

H. Thomas Baumgardner, Duke Energy Consultant. Mr. Baumgardner has 45 years of experience in fossil and nuclear power plant operations experience. Mr. Baumgardner was Senior Reactor Operator at CNS the late 1970s to the mid-I 990s. Following this, he was a supervisor and writer for the CNS Emergency and Abnormal Operating Procedures until his retirement in 2010. Mr. Baumgardner participated in the peer review of the SWEL.

5.0 SELECTION OF THE SSCs INCLUDED ON THE SWEL Guidance on development of the SWEL is provided in Section 3 of EPRI 1025286. Two SWELs are prepared: SWEL 1, a sample of items to safely shut down the reactor and maintain containment integrity; and SWEL 2, spent fuel pool related items. SWEL I is expected to contain 90-120 items for each unit. The CNS SWEL I contains 119 items for Unit I and 113 items for Unit 2. This satisfies the expectation from the EPRI guidance.

The development of the CNS SWEL is documented in a Catawba calculation package, CNC-1206.03-00-0202, 1OCFR50.540')Recommendation 2.3 Near-Term Task Force (NTTF)Seismic Walkdowns, Revision 0. The calculation discusses the development of the seismic walkdown equipment list (SWEL 1) and the seismic walkdown spent fuel pool equipment list (SWEL 2). An in-process draft of the calculation was provided to the peer reviewers at the CNS site visit September 25-27, 2012. The final calculation and SWEL lists for each unit were provided to the peer reviewers on November 7, 2012.

The SWEL was originated by Mr. Thomas Leitch, Senior Engineer, CNS Design Engineering, and checked by Mr. Raymond Fung, Senior Engineer, CNS Design Engineering. Messrs. Leitch and Fung have extensive knowledge of CNS design, licensing and operation. Mr. Robert Pryce, a former Senior Reactor Operator, provided operations input. Mr. Baumgardner performed a peer review of the SWEL for operations as part of the Peer Review Team. Mr. Baumgardner was a Senior Reactor Operator at CNS and an AP/EOP Procedure Supervisor. Mr. Baumgardner's peer review of the SWEL has been documented in an email attached to the calculation (Attachment 10).

CNS started with the IPEEE Equipment List as the base list. This'list is documented in CNS Calculation CNC- 1535.00-00-0005, Revision 3, Seismic Capacity.Evaluationsfor 1PEEE andEPRI Margins Study.

Using this list is intended to satisfy Screens 1, 2 and 3 of the EPRI guidance document.

SWEL I was developed by selecting a sample of equipment from the base list. SWEL 2 was developed separately as described in Calculation CNC-1206.03-00-0202. The calculation includes separate attachments for the CNS Units 1 and 2 SWEL I and SWEL.2 lists.

The SWIEL 1 lists comply with the four screens in the EPRI guidance:

Screen 1: Seismic Category I. Because the non-safety (therefore, non-Category 1) equipment is identified, this screen was satisfied in the sample by not including the non-safety equipment.

Shae .> Page 3 CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 7 of 37

NTTF 2.3 SEISMIC PEER REVIEW REPORT Report No. I 457690303-R-M-00003, Rev. 0 CATAWBA NUCLEAR STATION -N ITS lAND2 No-enmber2012 table of risk-significant items is in Attachment 9 of the SWEL calculation. Most of the items are included. It is concluded that risk insights were properly considered.

Calculation CNC-1206.03-00-0202 contains a section on the development of the SWEL 2. There are two base lists developed for each unit: one for spent fuel cooling system components, the other for components that could cause rapid drain down. The base lists are in Attachment 6. The rationale for identifying the components for each list is provided in the calculation. There were 11 spent fuel cooling components identified for Unit 1, of which five were put on the SWEL 2 in Attachment 7, and ten for Unit 2, of which four were put on the SWEL 2. There were 16 rapid drain components identified for Unit 1, of which four were put on the SWEL 2, and 18 for Unit 2, of which five were put on the SWEL 2. The calculation has a discussion of why some of the base list components were not added to the SWEL 2. It is concluded that the SWEL 2 conforms to the EPRI guidance.

A preliminary peer review checklist was developed with specific comments to be addressed. This checklist is included as Appendix A to this report. The checklist and comments were discussed with Messrs. Thomas Leitch and Robert Pryce at the site exit meeting. The final calculation was reviewed to see if the comments were resolved. All of the comments are considered resolved. The final checklist is included as Appendix B of this report.

6.0 SEISMIC WALKDOWNS AND AREA WALK-BYS The equipment items and areas to be walked down were specified in the SWEL provided by Duke (CNC-1206.03-00-0202). The walkdowns consist of two parts: equipment-specific seismic walkdowns and area walk-bys. The specific instructions for each part are delineated in EPRI 1025286.

The seismic walkdown results are documented in Shaw /ARES Reports 1457690303-R-M-0000I and

-00002 for Units I and 2, respectively. Appendix A of the reports contains the filled out SWCs and AWCs. Appendix B of the reports contains a listing of the potentially adverse seismic conditions reported to Duke Energy for licensing basis review. Appendix C of the reports contains a listing of items that were inaccessible or had concealed anchorage. The evaluation of these items will be completed by Duke Energy.

Seismic walkdowns of specific items on the SWEL (SWEL I plus SWEL 2) focused on identifying adverse anchorage conditions, adverse seismic interactions, and other adverse seismic conditions that could challenge the seismic adequacy of a SWEL item.

Anchorage was examined for degraded, nonconforming or unanalyzed conditions. This included visual inspection of the anchorage and verification of anchorage condition. The visual inspections looked for bent, broken, missing or loose hardware; corrosion that is more than mild surface oxidation; visible cracks in the concrete near anchors; and other potentially adverse seismic conditions. This did not apply to line-mounted items.

Anchorage configuration was verified to be consistent with the existing plant documentation for a portion of the equipment with anchorage. The anchorage configuration verification must be done for at Shaw° I~ Page 5 CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 9 of 37

NTTF 2.3 SEISMIC PEER REVIEW REPORT Report_No. 1457690303-R-M-00003, Rev. 0 CATAWBA NUCLEAR STATION UNITS I AND 2 November 2012 Interviews of walkdown personnel were jointly performed by the Duke, ARES, and Shaw members of the Peer Review Team. Personnel were interviewed as teams (two at a time) to assess their working synergy as well as individual capabilities/knowledge. Mr. Mark Eli was verified to have attended the EPRI NTTF 2.3 Seismic Walkdown Training Course (Mr. Eli is also a SQUG Seismic Capability Engineer). Messrs. North, Hanna, Rubright, Fazio, Berdos, Pappas, and Adam were verified to have received the EPRI NTTF 2.3 Seismic Walkdown Training Course from an individual (Mr. Mark Eli) who had taken the EPRI course in person. Discussion provided positive indication that the walkdown personnel had adequate experience and training to perform walkdown and walk-by activities in compliance with the EPRI Seismic Walkdown.Guidance. As teams, they displayed knowledge of the primary objectives of the walkdowns, appropriate levels of dialog between themselves to reach common agreement without excessive discussion, and adequate objectivity in identification of significant discrepancies between as-designed and as-found conditions. Team member qualifications are included in the unit-specific walkdown reports.

In-process review of the walkdown documentation packages verified sufficient information included to allow ready identification and location of in-situ SWEL components. Appropriate vendor drawings, anchorage details, calculations and/or license definitions or IPEEE documentation were included for the components specified for detailed inspection of anchorage provisions. A few inconsistencies were noted between document identifiers in the checklist entries and the package contents; however, these were easily resolved.

The Peer Review Team reviewed a number of in-process Area Walkdown Checklists (AWCs) and Seismic Walkdown Checklists (SWCs). The reviews are summarized in Appendix C. Initial Peer Review activity related to walkdown implementation concentrated on personal interviews and discussions with the walkdown teams, individually and as a group. Interaction with individual teams relied on posing hypothetical situations related to potential component configurations and assessing responses related to completion of the checklists. Group meetings, some including participation of Duke Energy personnel, addressed more generic issues such as how to deal with "non-50%" component anchorages, including obstructed views of anchorage provisions and cabinet interior conditions.

Clarification was provided on SWC questions 2, 3, 4 and 6 to address general as-found conditions without requiring design basis comparisons.

It was noted that observations/assessments are accurate but documentation is terse. Instances requiring

,team deliberation, drawing on specialized knowledge gained through seismic engineering experience, and/or follow-up evaluation activity couldlbenefit from a brief explanation and/or photos in the checklists. As the intent is not to include hard .copy in the final report, references (drawings, calculations, etc.) used in the walkdown should be explicitly identified in the walkdown packages.

Significant discussion centered on documentation ofjustifications for assessing in-situ conditions as acceptable with respect to seismic interaction considerations. Clarification was provided that informed judgment of SQUG/EPRI-trained individuals does not require explicit documentation, but that ambiguous or unusual conditions would be documented through written notes and/or the use of photographs.

Page 7 Shm (9 CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 11 of 37

NTTF 2.3 SEISMIC PEER REVIEW REPORT Report No. 1457690303-R-M-00003, Rev. 0 C*A-wBA NUCLEAR STATION UNITS I AND2 November 2012 The Peer Review Team concludes that the licensing basis reviews were conducted in accordance with the EPRI guidance, subject to the resolution of the comments.

8.0 DECISIONS ON ENTERING POTENTIALLY ADVERSE SEISMIC CONDITIONS INTO THE CAP PROCESS All of the potentially adverse seismic conditions identified by the seismic walkdown teams were entered in the CAP for further evaluation: The Peer Review Team review of the seismic walkdowns determined that the identifications of adverse seismic conditions were conservatively made. Thus, the decision to enter all of them into the CAP was likewise conservative.

The licensing basis reviews determined none of the potentially adverse seismic conditions violated the CNS licensing basis. Therefore, it was not necessary to perform any extent of condition evaluations.

There were a number of enhancements identified as a result of the walkdowns, which were determined to improve the seismic condition of the plant. Work orders were assigned for implementation of the enhancements.

The Peer Review Team concludes that the decisions on entering potentially adverse conditions in the CAP process were in accordance with the EPRI guidance.

9.0 SUBMITTAL REPORT The Peer Review Team reviewed a draft of the submittal report for CNS Unit 1 provided by Mr. Thomas Leitch on November 8, 2012. The report contained the required sections and discussions. Comments on the submittal were provided to Mr. Leitch on November 13, 2012. Updated submittal drafts for Unit I and Unit 2 were provided to the Peer Review Team on November 15, 2012. Further comments were provided on November 17, 2012.

The most significant comment is that Table 4-1 of the Unit I submittal, which contains the CAP dispositions for the potentially adverse conditions, contains one item (Item 28) that says current licensing basis is not met. This conflicts with the statement in Section 5 that all of the items were determined to meet the current licensing basis. In Table 4-1 of the Unit 2 submittal, this item is described as meeting the licensing basis. It is noted that this item is one of the items for which the Peer Review Team commented on the licensing basis review documentation not being sufficient to show the licensing basis was met.

Another significant comment is that Section 7, covering the Peer Review, needs to state that there are still comments outstanding.

It is recommended that the submittal include a discussion of the adequacy of CNS license monitoring and maintenance procedures in light of the findings of the walkdowns and licensing basis reviews, as this is one of the purposes of the NRC request stated in Section 1 of the EPRI guidance.

Shiaw ( -h, i T° Page 9 CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 13 of 37

NTTF 2.3 SEISMIC PEER REVIEW REPORT Report No. 1457690303-R-M-00003, Rev. 0 CATAWBA NUCLEAR STATION UNITS I AND 2 November 2012 APPENDIX A PEER REVIEW CHECKLIST FOR IN-PROCESS SWEL A

Shaw°

@ Page A-I CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 15 of 37

.NTTF 2.3 SEISMIC PEER REVIEW REPORT Report No. 1457690303-R-M-00003, Rev. 0 CATAWBA NUCLEAR STATION UNITS I AND 2 NoveThber 2012 Sheet 2 of 3 Peer Review Checklist for SWEL

d. Various environments? YE] NE]

Calculationstates there are a variety of equipment environments.

Comment: Need to have some detail to show this is true. Can relate the locations to environments so that the counts for the different environments mentioned in the EPRI guidanceis given. This does not have to be detailed: rather,a given location could be characterizedwith certain environments, even if those environments vary somewhat within the location.

Comment: Need number inside containment.

Comment: Need to break this out by unit.

e. Equipment enhanced based on the findings of the IPEEE (or equivalent) program? YE] NE]

Attachment 4 is a table of the IPEEE enhancements and which are included in SWEL-1.

Comment: Need text in calculationsaying where this list came from. Need to show it by unit. Need to justify why the one enhancementnot on SWEL- 1 is not included (Note: it is not associatedwith a specific component; however, it would be included in the Area Walk-By. It could be indicatedas included in SWEL-1 byway of the AWBs.)

f. Were risk insights considered in the development of SWEL 1? YE] NE]

The EPRI guidancestates: "The development of SWEL I should considerationof the importanceof the contribution to risk for the SSCs. " There is no discussionof this in the calculation.

Comment: Should have discussion of this in the calculation. Show that a sufficient number of risk significantitems are included in SWEL-1. Should be able to derive this from the IPEEE report.

3. For SWEL 2:

a. Were spent fuel pool related items considered, and if applicable included in YE] NEI SWEL 2?

There is a detailed discussion of the development of SWEL-2 in the calculation.

The materialpresented seems to be comprehensive.

Comment: Need to specify who developed it, what their backgrounds are, and have them sign off or otherwise document theirparticipation. The materialpresented seems to be comprehensive.

Comment: Will need to state when Unit 2 refueling cavity manual drain valves will be done.

b. Was an appropriate justification documented for spent fuel pool related items not YO NE]

included in SWEL 2?

Section contains a discussion for each item not included in SWEL 2.

~N Page A-3 Shawo CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 17 of 37

NTTF 2.3 SEISMIC PEER REVIEW REPORT Report No. 1457690303-R-M-00003, Rev. 0 CA-TAIA BANU-CLEAR- STA TION UNITS I AND 2 November 2012 APPENDIX B PEER REVIEW CHECKLIST FOR FINAL SWEL Sfiawe Shaw~ POIT~NPage B-I CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 19 of 37

_NTTE2.3 SEISMIC PEER REVIEW REPORT . .. .Report-No. 1457690303-R-M-00003, Rev. 0 CATAWBA NUCLEAR STATION UNITS I AND 2 November 2012 Sheet 2 of 4 Peer Review Checklist for SWEL

c. Various types of equipment? YE NO The calculationstates that a variety of equipment types is represented.

Comment: Should have a table with a list of equipment categoriesand the number of components in each category. There is a pivot table in the SWEL spreadsheet giving a list of equipment types and the number of each type. The types should agree with the classes in Appendix B of the EPRI guidance document. Should have a table for each unit.

Attachments 4 and 5 show number of items in each equipment category for each unit. The categoriesagree with Appendix B of the EPRI guidance. Shows good variety of equipment classes represented.

d. Various environments? YE] NE Calculationstates there are a variety of equipment environments.

Comment: Need to have some detail to show this is true. Can relate the locations to environments so that the counts for the different environments mentioned in the EPRI guidance is given. This does not have to be detailed, rather,a given location could be characterizedwith certainenvironments, even if those environments vary somewhat within the location.

Final SWEL calculationhas text describing environments represented.

Attachments 4 and 5 have tables showing wide rangeof areas included. Comment is resolved.

Comment: Need number inside containment.

Attachments 4 and 5 show 8 items in each unit are inside containment. Comment is resolved.

Comment: Need to break this out by unit.

Attachments 4 and 5 show number in each unit. Comment is resolved.

e. Equipment enhanced based on the findings of the IPEEE (or equivalent) program? Y[D NE Attachment 4 is a table of the IPEEE enhancements and which are included in

SVVEL-1.

.Comment: Need text in calculation saying where this list came from. Need to show it by unit. Need to justify why the one enhancement not on SWEL- 1 is not included (Note: it is not associatedwith a specific component; however, it would be included in the Area Walk-By. It could be indicatedas included in S WEL- 1 by way of the AWBs.)

Text not added to calc. However, text is in submittal. Comment is resolved.

Shawo1 A ~ Page B-3 CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 21 of 37

NTTF 2.3-SEISMICPEER REVlEW REPORT -Report No. 1457690303-R-M-00003, Rev. 0 CATAWBA NUCLEAR STATION UNITS I AND 2 November 2012 Sheet 4 of 4 Peer Review Checklist for SWEL

5. Have all peer review comments been adequately addressed in the final SWEL? Y[D NEI Peer Reviewer #1: Paul D. Baughman, P.E., ARES 9=6v= Date: 11/18/2012

-&-z" Peer Reviewer #2: George Bushnell, P.E., SHAW Date: 11/18/2012 Peer Reviewer #2: Robert L. Keiser, P.E., Duke Date: 11/18/2012 Page B-5 Shiawo(

CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 23 of 37

NTTF 2.3 SEISMIC PEER REVIEW REPORT Report No. 1457690303-R-M-00003, Rev. 0 CATAWBA NUCLEAR STATION UNITS I AND 2 November 2012 Walkdown Team Members:

Team I Team r 2 Team 3 Team.4 John North ARES SWE Lead I Mairk Eli :AR. $SWE Lead: ,I Kevin Rubright ARES SWE Lead ..Bryan Hanna ARES SWE Lead Tony Fazio Shaw SWE Jim. Paas Shaw SWE" Phil Berdos Shaw SWE :Jim Adam. Shaw SWE Michael Medlin Duke Support :TomiLieitch .Duke Support. Raymond Fung Duke Support David Kennedy Duke Support:

Summary of Peer Review of In-Process SWCs and AWCs EDB ID Equipment 50% Non 50% Line Overall Team Comments Class Anchorage Anchorage Mounted Status Aux Bldg Area Walkdown (LL 57 & 58):

Room 400 Y3 1. WD centered around 2 in-line components (below)

Roo 40-Y2. Ambient conditions accounted for with no added notations

3. Photos not attached; ; references not cited 1RN351 7 X Y 3 No notations; references not cited 2RN351 7 X Y 3 No notations; references not cited Aux Bldg Area Walkdown (AA-53):

Room 373 y 1. WD centered around AHU (below)

2. Ambient conditions accounted for with no added notations

3. Photos not attached; ; references not cited I-SGR-AHU-3 10 X - Y 3 No notations Diesel Generator Area Walkdown (DIA):

Area - - Y 3 1. WD centered around EDG Charger (below):

2. Ambient conditions accounted for with no added notation's IDGCA 16 X - - Y 3 No notations Aux Bldg Area Walkdown (H-H-58):

Room 300 - - - Y 3 1. WD centered around pump (below)

2. No added notations; no mention of block wall 1KCPUA2 5 X - - Y 3 Question #8: no mention of block wall Diesel Generator Area Walkdown (DIA, CC40):

Area - - - Y 3 1. WD centered around Aux Power Battery (below)

2. Does not reflect observation on component anchorage IDGBA 15 X - - Notation (and photo) of apparent concrete cracking around anchorage; U indications of previous liquid spill.

Aux Bldg Area Walkdown (Room 478, EE-55)

Room 478 Y 3 I. WD centered around Electrical Enclosure (below):

2. No added notations; references not cited Sha rSATaw° Page C-2 CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 25 of 37

NTTF 2.3 SEISMIC PEER REVIEW REPORT Report No. 1457690303-R-M-00003, Rev. 0 CATAWBA NUCLEAR STATION UNITS 1 AND 2 November 2012 Summary of Peer Review of In-Process SWCs and AWCs EDB ID Equipment 50% Non 50% Line Overall Team Comments Anchorage Anchorage Mounted Status Class 2NDHXA 21 X - Y I No additional notations; references are identified 2ND26 7 X Y I No added notations; references not cited 2ND25A 8 - Y 1 No added notations; references not cited 2NSHX0003 21 X - Y 1 Reference identified Aux Bldg y Area Walkdown (Room 227, HH62-JJ63):

Room 227 1. WD centered around NV system components (below) 2NV312A 8 X Y I Seismic interaction potential resolved by walkdown 2NV77A 8 X Y 1 Well supported system elements/components noted in area Aux Bldg Area Walkdown (Room 427, JJ-62):

Room 427 - Y 1 1. WD centered around in-line component below

2. No added notations 2NS29A 8 X Y 1 No added notations, references not cited Aux Bldg Area Walkdown (Room 318A, HH52-JJ5 1):

Room 318A - Y 1 1. WD centered around in-line components below

2. No added notations IN1173A 8 X Y I Reference included 1NI9A 8 X Y 1 No added notations; references not cited Aux Bldg y Area Walkdown (Room 419, HH5 I):

Room 419 WD centered around in-line component below INS29A 8 X Y I No added notations; references not cited Aux Bldg Area Walkdown (Room 217, FF53-JJ5 1):

Room 217 1. Missing anchorage/support elements on instrument tubing

2. Potential spatial interaction noted: impact and spray wetting

3. Photos included 1N185A 8 X Y I Line mounted component; no added notations 1NV77A 8 X Y 1 Noted as well-supported component INV312A 8 X Y 1 Line mounted component; no added notations RN Pump House Area Walkdown (RN Purnp House, Pit A):

I. Seismic interaction identified with service hoist in storage position

2. Photo included IRN30A 8 X Y I Line mounted component; no added notations ORNLT7390 18 - Y 1 Reference identified ShawPge C-4 CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 27 of 37

NTTF 2.3 SEISMIC PEER REVIEW REPORT Report No. 1457690303-R-M-00003, Rev. 0 CATAWBA NUCLEAR STATION UNITS 1 AND 2 November 2012 Summary of Peer Review of In-Process SWCs and AWCs Equipment 506/ Non 50% Line Overall Team EDB ID Comments Class Anchorage Anchorage Mounted Status I ea Team 2: From this sample, observations/assessments are accurate but documentation is terse. Peer Review accompanied this team during performance of an equipment and area walkdown: observation was that the team worked together, conferring on each observation before reaching conclusions.

2VC5B 8 X Y 4 No added notations; references not cited Aux Bldg Area Walkdown (Room 340, DD-58)

Room 340 1. WD centered around Battery Charger (below)

- Y 4 2. Noted temporary storage condition stated but no conclusion drawn pro or con

3. Notations and photos included 2ECS 16 X Y 4 No notations S awPage C-6 CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 29 of 37

NTTF 2.3 SEISMIC PEER REVIEW REPORT Report No. 1457690303-R-M-00003, Rev. 0 CATAWBA NUCLEAR STATION UNITS I AND 2 November 2012 Walkdown Team Members:

Team 1 Te 2 Team 3 Lead.Team 4 John North ARES SWE Lead Mark.Eli, ARE SSWELead&' Kevin Rubright ARES SWE Lead Bryan Hanna ARES SWE Lead Tony Fazio Shaw SWE Jim Pi.os S.ia:w::.SWE Phil Berdos Shaw SWE Jim. Adam, Shaw SWE Michael Medlin Duke Support Tom Leitch , Duke...Support:: Raymond Fung Duke Support David Kennedy Duke Support Summary of Peer Review of Final SWCs and AWCs EDB ID Equipment 50% Non 50% Line Overall Team Comments Class Anchorage Anchorage Mounted Status Ul MCR Area Walkdown (Unit I Main Control Room AA56)

- U 1,2 1. Potential seismic interaction: no lateral bracing on rack

2. Photo provided IMC1 20 X Y 1,2 No adverse conditions noted; no photographs 1MC2 20 X Y 1,2 No adverse conditions noted; no photographs DIA CC-40 Y 3 Area Walkdown (Battery Enclosure)

No adverse conditions noted; no photographs IDGBA 15 X Y 3 Anchorage detail verified against reference documents Photo, discussion provided to justify apparent concrete crack DIA CC-38 Y 3 Area Walkdown (DI A 556' CC-38)

No adverse conditions noted; no photographs IVGCPAI Anchorage detail verified against reference documents No adverse conditions noted; no photographs D IA DD-38 Y 3 Area Walkdown (DI A 556' DD-38)i No adverse conditions noted; no photographs 1VGTKA1 21 X Y 3 Anchorage detail verified against reference documents No adverse conditions noted; no photographs 1VGTKA2 21 X Y 3 Anchorage detail verified against reference documents No adverse conditions noted; no photographs DIA CC-40 Y 3 Area Walkdown (DIA 556' CC-40)

No adverse conditions noted; no photographs IDGCA 16 X Y 3 Anchorage detail verified against reference documents No adverse conditions noted; no photographs DIA CC-3940 Area Walkdown (DI A 556' CC-40)

No adverse conditions noted; no photographs ILDPT5144 8 1X Y 3 No adverse conditions noted;no photographs ILVG25 8 X Y 3 No adverse conditions noted; no photographs Shaw- (]VR PDRATONP CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 31 of 37

NTTF 2.3 SEISMIC PEER REVIEW REPORT Report No. 1457690303-R-M-00003, Rev. 0 CATAWBA NUCLEAR STATION UNITS 1 AND 2 November 2012 Summary of Peer Review of Final SWCs and AWCs EDB ID Equipment 50% Non 50% Line Overall Team Comments Class Anchorage Anchorage Mounted Status 1RN849B 08 X Y 1 *No adverse conditions noted; no photographs DHI FF53 Potential seismic interactions cited; housekeeping items related to

- - - N 2 stored scaffolding and a ladder Photographs provided 1SA5 07 - - X Y 2 No adverse conditions noted; no photographs 1SV26B 08 - - X Y 2 No adverse conditions noted; no photographs 1SV7 07 - - X Y 2 No adverse conditions noted; no photographs DHI DD52 2 AreaNoWalkdown adverse conditions noted; no photographsV ISM3 07 X Y 2 No adverse conditions noted; no photographs DHI EE44 Y 2 Area Walkdown No adverse conditions noted; no photographs ISMi 07 X Y 2 No adverse conditions noted; no photographs DHI DD44 Area Walkdown (DHI Room 591)

U 2 1. Loose anchorage on limit switch termination box

2. Photo provided

3. No additional adverse conditions noted ICA62A 08 X Y 2,4 No adverse conditions noted; no photographs ICA66B 08 X Y 2 No adverse conditions noted; no photographs RNB Pump House Area Walkdown (RN Pump House, Pit A)

Pit A - N I 1. Potential seismic spatial interaction; photo provided

2. No additional adverse conditions noted ORNLT7390 18 X Y I Anchorage detail verified against reference documents No adverse conditions noted; no photographs IRN30A 08 - X Y 1 No adverse conditions noted; no photographs RN-B Pump House - 2 No adverse conditions noted; no photographs Train B Room IRNPUB 06 X Y 2 Anchorage detail verified against reference documents No adverse conditions noted; no photographs AUX BLDG 103 Y 3 Area Walkdown (AB Room 103)

No adverse.conditions noted; no photographs 1NSIB 08 X Y 3 No adverse conditions noted; no photographs 1NSPUB 06 X Y 3 Anchorage detail verified against reference documents No adverse conditions noted; no photographs I SPage D-4 CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 33 of 37

NTTF 2.3 SEISMIC PEER REVIEW REPORT Report No. 1457690303-R-M-00003, R~v. 0 CATAWBA NUCLEAR STATION UNITS I AND 2 November 2012 Summary of Peer Review of Final SWCs and AWCs EDB ID Equipment 50% Non 50% Line Overall Team Comments Class Anchorage Anchorage Mounted Status 1N1147B 08 - X Y 3 No adverse conditions noted; no photographs INIPUB 5 Anchorage detail verified against reference documents 05No adverse conditions noted; no photographs 1NV253B 08 - X Y 3 No adverse conditions noted; no photographs 1NV252A 08 X Y 3 No adverse conditions noted; no photographs AUX BLDG 235 Y 3 Area Walkdown (AB Room 235)

No adverse conditions noted; no photographs INII15A 08 X Y 3 No adverse conditions noted; no photographs AUX BLDG 250 _ Y 2,4 Area Walkdown (AB Room 250)

BB-51 ____2,4No adverse conditions noted; no photographs ICA116A 08 - X Y 2,4 No adverse conditions noted; no photographs AUX BLDG HH58 _Y 3 Area Walkdown (AB HH58 Unit 2)

No adverse conditions noted; no photographs 2KCI-FJX0044 Component integral to pump motor housing No adverse conditions noted; no photographs AUX BLDG 594 Area Walkdown (AB General Area 594)

-N 2 1I. Potential seismic interaction: adjacent 55 gallon drum temp storage; secured trash cart noted

2. No additional adverse conditions noted; no photos 2KCTKA 21 X y Anchorage detail verified against reference documents No adverse conditions noted; no photographs UNIT 2 MCR Area Walkdown (Unit 2 MCR AA58)

I. Potential interaction: 2DCSMC2 apparent lack of bracing; photograph provided

2. No adverse conditions noted; 2MCI 20 X Y 1 No adverse conditions noted 2MC2 20 X Y I No adverse conditions noted D2A 2A D/G y Area Walkdown (2A DG Room)

Room No adverse conditions noted; no photographs 2DGCA 18 X _ 2 Anchorage detailcracking/bolt verified against edgereference Minor concrete distance documents resolved 2EQCDEA 17 X - Y 2 No adverse conditions noted; no photographs 2VG25 08 X Y 2 No adverse conditions noted; no photographs 2VG27 08 - X Y 2 No adverse conditions noted; no photographs Page D-6 Shaw (' -/

CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 35 of 37

NTTF 2.3 SEISMIC PEER REVIEW REPORT Report No. 1457690303-R-M-00003, Rev. 0 CATAWBA NUCLEAR STATION UNITS I AND 2 November 2012 Summary of Peer Review of Final SWCs and AWCs EDB ID Equipment 50% Non 50% Line Overall Team Comments Class Anchorage Anchorage Mounted Status IKC18B 08 - X Y 3 No adverse conditions noted; no photographs 1KC2B 08 X Y 3 No adverse conditions noted; no photographs IKC57A 07 X Y 3 No adverse conditions noted; no photographs AUX BLDG 318A Area Walkdown (Aux Bldg Room 318A HH52)

YNo adverse conditions notedI no photographs NI73A 08 - X Y I No adverse conditions noted; no photographs INI9A 08 X Y I No adverse conditions noted; no photographs AUX BLDG 330 Y Area Walkdown (AB Room 330)

- No adverse conditions noted; no photographs 1EMXB 01 X N 3 Missing anchor bolt; photograph included AUX BLDG 350 Area Walkdown (AB Room 350 BB5455)

BB-5455 1. Potential seismic interaction w/ fire suppression pipe

2. No additional adverse conditions noted

3. Photographs provided I EID Anchorage detail verified against reference documents 16 X Y 4 adequate References cited 1EIF Potential flexibility issue with attached conduit; photo 16 X U 4 Anchorage detail verified against reference documents Masonry wall verified as seismically adequate No additional adverse conditions noted I EIB Anchorage detail verified against reference documents 16 X Y 4 Masonry wall verified as seismically adequate No adverse conditions noted; no photographs 1EPB/PNLB 14 X Y Masonry wall verified as seismically adequate No adverse conditions noted; no photographs Shiawe qg Page D-8 CNC-1206.03-00-0203 Rev 0 Attachment 6A Page 37 of 37

NTTF 2.3 SEISMIC WALKDOWN REPORT CATAWBA NUCLEAR STATION UNIT 1 Table of Contents - Duke Portion of Walkdown

1.0 INTRODUCTION

................................................

2.0 SCOPE ......................................................... 2 3.0 METHODOLOGY ................................................ 2 4.0 PERSONNEL 2 5.0 WALKDOWN EXECUTION ......................................... 2 6.0 PEER REVIEW 3 7.0 RESULTS ....................................................... 3

8.0 REFERENCES

................................................... 3 Appendices Duke Appendix A: Catawba Unit I - Previously Inaccessible Seismic Walkdown Checklists and Area Walk-By Checklists for 16 Items Walked Down By Duke Personnel ...................... 2 Pages Duke Appendix B: Catawba Unit 1 - Potentially Adverse Seismic Conditions Discovered During Walkdown of the 16 Previously Inaccessible Components in the Duke Portion of the Walkdown 2 Pages Duke Appendix C: Catawba Unit 1 - Walkdown Status Update for Equipment That Was Inaccessible or H ad Concealed A nchorage ............................................................................................................. 3 Pages Page 1 CNC-1 206.03-00-0203 Rev 1 Attachment 7A Page 1 of 105

NTTF 2.3 SEISMIC WALKDOWN REPORT CATAWBA NUCLEAR STATION UNIT I

1.0 INTRODUCTION

......

Duke Energy (Duke) contracted with the Shaw Group (Shaw) / ARES Corporation (ARES) Team to perform the NTTF 2.3 seismic walkdowns at the Catawba Nuclear Station. Shaw performed the walkdowns on the accessible components. Duke personnel completed the walkdowns on the remaining components by the end of the IEOC20 refueling outage.

2.0 SCOPE The Duke portion of this effort was to complete the NTTF 2.3 seismic walkdowns and walkbys at the Catawba Nuclear Station Unit 1 for the eleven AWC's and sixteen SWC's which were inaccessible during the time the Shaw Group/Ares Corporation were on site.

3.0 METHODOLOGY The Duke walkdowns were performed using the methodology described in section 3.0 of the Shaw/ARES Report No. 1457690303-R-M-00001 (rev 2) that is part of this attachment.

4.0 PERSONNEL Walkdowns were performed by two person teams. The team members were T. R. Leitch, R. C. Fung, and J. D. Kennedy. All persons were qualified as SWEs in accordance with the requirements contained in Section 2, Personnel Qualification,of EPRI 1025286. Personnel qualifications are summarized in Table 2-1 of the submittal report.

5.0 WALKDOWN EXECUTION The Duke Team performed the seismic walkdowns and area walk-bys between November 1, 2012 and December 16, 2012, in accordance with the guidance provided in EPRI 1025286. The walkdowns and walk-bys were accomplished in the following manner:

• Duke Team personnel reviewed the SWELs to become familiar with the extent of the walkdowns to be performed and the equipment to be walked down. This included SWEL 1, which includes items involved in safely shutting down the reactor and maintaining containment integrity; and SWEL 2, consisting of spent fuel pool related items.

• Duke personnel:collected copies of required design information such as calculations, drawings, specifications, manuals, and Individual Plant Examination of External Events (IPEEE) documentation. The IPEEE documentation was not part of the plant licensing basis, but was useful for clarifying field conditions.

• Walkdown packages for the equipment to be inspected, consisting of Seismic Walkdown Checklists (SWCs), Area Walk-By Checklists (AWCs), and supporting documentation were assembled.

" Whenever walkdowns were scheduled, the teams met with supervision/management for a pre-job brief.

Page 2 CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 2 of 105

NTTF 2.3 SEISMIC WALKDOWN REPORT CATAWBA NUCLEAR STATION UNIT 1

" Each Walkdown Team, consisting of two Duke engineers, performed the scheduled walkdowv. ...

Each team filled out the checklists, took notes, and discussed the observations. The Duke engineers took photographs to help document the results. Questions and uncertainties were recorded for follow-up action.

" As the project progressed, the SWCs and AWCs were updated as needed. The final checklists were signed by the Walkdown Team members. Supporting documentation and photographs, where needed to explain conditions reported on the checklists, were attached to the checklists.

Other documentation and photographs were filed at the site.

6.0 PEER REVIEW A peer review of the completed supplemental activities was performed by the original peer review team.

See Attachment 8A.

7.0 RESULTS Duke personnel walked down 11 SWEL 1 items, and conducted 8 walkbys associated with these items.

Five SWEL 2 items were walked down, and 3 area walkbys associated with these items were performed.

Anchorage was verified on 4 of the 4 anchored items walked down by Duke. The detailed list of the walkdowns and walkbys, as documented on the SWCs and AWCs, is contained in Duke Appendix A.

Four new potentially adverse seismic conditions were identified which required licensing basis reviews.

Two involved seismic interactions and one involved hardware issues. All potentially adverse seismic conditions are identified in Duke Appendix B. Duke has entered each potentially adverse seismic condition into its corrective action program using PIPs. The NRC 50.54(f) letter and EPRI 1025286 requires the submittal report contain a description of how each potential adverse seismic condition is being addressed and its current status. Duke will provide this information in the submittal report.

Inaccessible items and items with concealed anchorage that were identified in Appendix C of Attachment 5A have their final status provided in Duke Appendix C.

8.0 REFERENCES

Letter, E. Leeds and M. Johnson (NRC) to All Power Reactor Licensees et al., "Request for Information Pursuant to Title 10 of the Code of Federal Regulations 50.54(f) Regarding Recommendations 2.1, 2.3, and 9.3, of the Near-Term TaskForce Review of Insights from the Fukushima Dai-ichi Accident," .3, "Recommendation 2.3: Seismic," dated March 12, 2012.

EPRI 1025286, Seismic Walkdown GuidanceForResolution of Fukushima Near Term Task Force Recommendation 2.3: Seismic, June 2012, Electric Power Research Institute, Palo Alto, CA.

Page 3 CNC-1 206.03-00-0203 Rev 1 Attachment 7A Page 3 of 105

NTTF 2.3 SEISMIC WALKDOWN REPORT CATAWBA NUCLEAR STATION UNIT 1 DUKE APPENDIX A CATAWBA UNIT 1 - PREVIOUSLY INACCESSIBLE SESIMIC WALKDOWN CHECKLISTS AND AREA WALK-BY CHECKLISTS FOR 16 ITEMS WALKED DOWN BY DUKE PERSONNEL Page A-1 CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 4 of 105

NTTF 2.3 SEISMIC WALKDOWN REPORT CATAWBA NUCLEAR STATION UNIT I CVl(React. Bldg.). 557',-DEG 58, RAD-40 (AWC)

• 1NV52A(SWC) (SWEL 1)

CVI (React. Bldg.), 560', DEG 46, RAD 47 (AWC)

• 1N154A (SWC) (SWEL 1)

CVI (React. Bldg.) 562', DEG 40, RAD 55 (AWC)

• 1N1438A(SWC) (SWEL 1)

CVI (React. Bldg.) 567', DEG 176, RAD 50 (AWC) 0 1ND2A (SWC) (SWEL 1)

CV1 (React. Bldg.) 568', DEG 176, RAD 25 (AWC) 0 1NDIB (SWC) (SWEL 1)

CV1 (React. Bldg.) 635'. ~DEG~~I m LI m 105. RAD 37 (ToD of Pzr Cavity) (AWC) 1 , w 1NC34A (SWC) (SWEL 1)

I1NC32B (SWC) (SWEL 1) 1NC36B (SWC) (SWEL 1)

CVI (React. Bldg.) 568'. DEG 244. RAD 47 (AWC)

• 1FW8 (SWC) (SWEL 2)

CV1 (React. Bldg.) 563', DEG 300,'RAD 33 (AWC)

• 1FW46 (SWC) (SWEL 2)

RX1 (React. Bldg. Annulus) 557'. DEG 280, RAD 58-63 (AWC)

• 1NVPDO042 (SWC) (SWEL 2)

• INV865A (SWC) (SWEL 2) 0 1NVPUSB (SWC) (SWEL 2)

Aux. Bldg. (Control Room) 594'. CC-55 (AWC)

ISSPSA (SWC) (SWEL 1)

Aux. Bldg. (Rm. 372) 560', AA-51 (AWC) 0 IETXB (SWC) (SWEL 1) 0 IETXD (SWC) (SWEL 1)

Page A-2 CNC-1206.03-00-0203 Rev 1 Attachment 7A

'Page 5 of 105

NTTF 2.3 SEISMIC WALKDOWN REPORT CATAWBA NUCLEAR STATION UNIT 1

.... .. DUKE APPENDIX B -

CATAWBA UNIT 1 - POTENTIALLY ADVERSE SEISMIC CONDITIONS DISCOVERED DURING WALKDOWN OF THE SIXTEEN PREVIOUSLY INACCESSIBLE COMPONENTS IN THE DUKE PORTION OF THE WALKDOWN.

Page B-I CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 6 of 105

N'ITF 2.3 SEISMIC WALKDOWN REPORT CATAWBA NUCLEAR STATION UNIT 1 NTTF CATAWBA 2.3 SEISMIC NUCLEAR WALKDOWN STATION UNIT REPORT 1 Catawba Unit 1, SWEL 1 NTTF 2.3 Seismic Item Walkdown Status Potentially Adverse Seismic Condition PIP No.

CVI, 560', Deg 46, Rad Loose locknut on rod supporting I WL820. Support is 47, Area Walk by for functional, but vibration could lead to support failure lN154A No, Config. unless locknut is tightened. C-12-10589 CV 1, 567', Deg 176, Rad Electray marked 140722 not secured to unistrut, and 50, Area Walk by for cables not well attached in tray. Cable attach to 2 IND2A No, Degraded IND37A. C-12-10589 NSR cables run from valve operator to junction box.

CV 1, 567', Deg 176, Rad Box found not fastened to unistrut support that goes to 50, Seismic Walk down wall. During sesimic event, box could fall off unistrut 3 for 1ND2A No, Degraded and only be supported by cables. C-12-10589 Notes:

(I) Each potential adverse seismic condition is classified as either "Unknown" or "No".

"Unknown" indicates that at the time ofthe walkdown, it could not be determined whether the in-field condition presents a potentially adverse seismic condition.

"No" indicates that at the time of the walkdown all anchors were observed and at least one anchor was found to be degraded, non-conforming, or unanalyzed; the anchorage configuration was not consistent with existing plant documentation; there were adverse seismic spatial interactions; or there were other adverse seismic conditions.

(2) PIP = Problem Investigation Process; PIP Nos. provided by Duke Energy Corporation.

Page B-2 CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 7 of 105

NTTF 2.3 SEISMIC WALKDOWN REPORT CATAWBA NUCLEAR STATION UNIT 1 Catawba Unit:i, SWEL. 1 C-NTTF 2.3 Seismic Walkdown PIII

1. Item Status Equipment That Was Inaccessible or Had Concealed Anchorage No.

I FWTK01: Refueling Due to enclosure of the tank with sheet metal siding, the tank's anchorage was not C I Water Storage Tank Resolved visible. Disassembly required is beyond scope of walk down program. 8959 I DGBNGC: lB Diesel Generator Neutral Could not observe anchorage of unistrut to wall without complete removal of C 2 Grounding Cubical Resolved cubical, which requires disassembly beyond scope of walk down program. 8959 IN154A: C-Leg Accumulator A C 3 Discharge Isolation Complete Duke personnel walked down during U IEOC20. 10589 IN1438A: Emergency N2 From CLA to INC-4 34A Complete Duke personnel walked down during U 1EOC20. Note (3)

IND2A: ND Pump IA C 5 Suction From Loop B. Complete Duke personnel walked down during U I EOC20. 10589 1NDIB: ND Pump IB 6 Suction From Loop B. Complete Duke personnel walked down during U I EOC20. Note (3)

I NC34A: Pressure Power Operated Relief 7 Valve Complete Duke personnel walked down during UI EOC20. Note (3)

INC32B: Pressure Power Operated Relief 8 Valve Complete Duke personnel walked down during U I EOC20. Note (3)

INC36B: Pressure Power Operated Relief 9 Valve Complete Duke personnel walked down during UI EOC20. Note (3) 1ETXB: 4160/600 VAC 10 Transformer Complete Duke personnel walked down prior to U I EOC20. Note (3)

IEMXD: 600 VAC Essential Motor Control I Center Deleted Inaccessible: Not walked down - Removed from SWEL I list prior to rev 0. Note (3)

ISSPSA: Solid State Protection System Train 12 A Complete Duke personnel walked down during UI EOC20. Note (3)

INV52A: IA NC Pump 13 Seal Return Complete Duke personnel walked down during U I EOC20. Note (3) 1ETXD: 4160/600 VAC Added to SWEL I list (prior to rev 0) to replace 1EMXD, Duke personnel walked 14 Transformer Complete down prior to U I EOC20. Note (3)

Notes:

(1) "Unknown" indicates a determination could not be made on anchorage conditions because the equipment was inaccessible or at least some of the anchorage was concealed from view.

(2) PIP = Problem Investigation Process; PIP Nos. provided by Duke Energy Corporation.

(3) PIP Nos. not provided; however, Duke Energy Corporation is tracking these items and their status is in the submittal report.

Page C-2 CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 9 of 105

Sheet I of 4 Status: YZ No- UM Area Walk-By Checklist (AWC)

Location: Bldg. CVJ Floor El. 557 Room, Area, DEG 58 RAD 40 Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results of judgments and findings.

Additional space is provided at the end of this checklist for documenting other comments.

Components: Equipment ID Description Column Line or Other Location Info INV52A IA NC Pump Seal Return El 557, 58 deg. Radius 40 ft.

Does anchorage of equipment in the area appear to be free of Y13 NO UO N/AE]

potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

2, Does anchorage of equipment in the area appear to be free of significant YS NO UEr] N/AEl degraded conditions?

3. Based on a visual inspection from the floor, do the cable/conduit Y[K NO U[3 N/AU raceways and HVAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear to be inside acceptable limits)?

I If the room in which the SWEL item is located is very large (e.g., Turbine Hall), the area selected should be described.

This selected area should be based on judgment, e.g., on the order of about 35 feet from the SWEL item.

AWC- INV52A.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 11 of 105

Sheet 3 of 4

.... .......... Status: YO 'N -- U-'

Area Walk-By Checklist (AWC)

Location: Bldg. CVI Floor El. 557 Room, Area, DEG 58 RAD 40 Evaluated by: Thomas R Leitch 7-",*-,-,- / Date: ./ ,' /'

RIVn?7ondl Funk ? Date: 2-7ZO t-3 AWC - I NVS2A.DOC CNC-1206.03o00-0203 Rev 1 Attachment 7A Page 13 of 105

Sheet 4 of 4 Status: YM NCI UE]

Area Walk-By Checklist (AWC)

Location: Bldg. CV] Floor El. 557 Room, Area' DEG 58 RAD 40 Phob Note: npty hangingpiece of electray.(see 8) Note:

Note:

f Note:

AWC- INV52A.DOC CNC-1206,03-00-0203 Rev 1 Attachment 7A Page 14 of 1_05 _j-

Sheet 1 of 3 Status: YZ NEUD-1 Seismic Walkdown Checklist (SWC)

Equipment ID No. 1NV52A Equip. Class, 7 (AOV)

Equipment Description 1A NC Pump Seal Return Location: Bldg. CV1 Floor El. 557 Room, Area DEG 58 RAD 40 Manufacturer, Model, Etc. (optional but recommended) Kerotest Instructions for Completing Checldist This checklist may beused to document the resu its of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YE- NZ of the 50% of SWEL items requiring such verification)?

2. Is the anchorage free of bent, broken, missing or loose hardware? YE] NEI UD- N/An1

2. I. the anchorage -reeof corrosion that is more than miud surface Yt]- NE] U0] N/AZ oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors? Y[E NE] UE] N/AZ

5. Is the anchorage configuration consistent with plant documentation? YE] NEI UE] N/A[D (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of YM NE] UE-potentially adverse seismic conditions?

Enter the equipment class namc from Appendix B: Classes of Equipment.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 15 of 105

Sheet 3 of 3 Status: YZ NEI U1-Seismic Walkdown Checklist (SWC)

Equipment ID No. INV52A Equip. Class, Equipment Description 1A NC Pump Seal Return Note:

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 17 of 105

Sheet 2 of 4 Status: YE NE -UFI Area Walk-By Checklist (AWC)

Location: Bldg. CVI Floor El. 560 Room, Area, DEG 46 RAD 47 PCHA

4. Does it appear that the area is free of potentially adverse seismic spatial Y9 NED UD N/AU interactions with other equipment in the area (e.g., ceiling tiles and lighting)?

5. Does it appear that the area is fiee of potentially adverse seismic YZ ND UD N/AD1 interactions that could cause flooding or spray in the area?

6. Does it appear that the area is free of potentially adverse seismic Y9 ND U['- N/A[D interactions that could cause a fire in the area?

7. Does it appear that the area is free of potentially adverse seismic YG0 NDI UD N/AD interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.g., scaffolding, lead shielding)?

8. Have you looked for and found no other seismic conditions that could YD NZ UD adversely affect the safety functions of the equipment in the area?

Found loose locknut on pipe support for 1WL820. If not corrected, this had potential to allow support to work loose during operation. See comments section.

Comments (Additional pages may be added as necessary)

Some cable trays in area are full but acceptable. Noticed loose locknut on rod supporting IWL820. Wrote Work Request to get it fixed. One small 6" electray has an empty section that is very flexible, but it is not close or heavy enough to interact seismically with other components, AWC- I NI0054A.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 19 of 105

Sheet 4 of 4 Status: Y[ NEI U-]

Area Walk-By Checklist (AWC)

Location: Bldg. CV1 Floor El. 560 Room, Area, DEG 46 RAD 47 PCHA Note: Full tray with well restrainedcables. See Note: Rod supporting 1WL820.

Comments.

LNUM; LU(JU, LUU;IU1 UfL IUU ZiU[)pp.)UIii I VVL Note:

See Comments.

AWC - IN 10054A.DOC CNC-1206.03-00-0203 Rev l Attachment 7A Page 21 of 105

Sheet i of 3 Status: Y[ NEI U-Seismic Walkdown Checklist (SWC)

Equipment ID No. 1NIO054A Equip. Class, 8 (MOV/SOV)

Equipment Description C-Leg Accum A Discharqeisol.

Location: Bldg. CVI Floor El. 560 Room, Area DEG 46 RAD 47 PCHA Manufacturer, Model, Etc. (optional but recommended) Westinghouse 09J-2-09 Instructions for Completing Checklist This checklist may be used to document.the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions maybe used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one Y171 NZ of the 50% of SWEL items requiring such verification)?

2. Is tie anchorage free of bent, broken, missing or loose hardware? YD NO UD N/AZ

3. Is the anchorage free of corrosion that is more than mild surface YE NE UE N/AZ oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors? YO NO UO N/A[9

5. Is the anchorage configuration consistent with plant documentation? YE- NE UE N/Az (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is. the anchorage free of Y* NilUE potentially adverse seismic conditions?

Enler the equipment class name firom Appendix B: Classes of Equipment.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 22 of 105

Sheet 2 of 3 Status: Y* NE UE-Seismic Walkdown Checklist (SWC)

Equipment DD No. 1NIO054A Equip. Class, 8 (MOV/SOV)

Equipment Description C-Leo Accum A DischargeIsol.

Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YZ ND UD N/AD

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ ND UD N/AD and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? YZ ND UD N/AD

10. Based on the above seismic interaction evaluations, is equipment free YE NO UD of potentially adverse seismic interaction effects?

Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ ND UD adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

No problems observed. See drawing CN-1041-02 for plan view. Also, see CN-1491-Ni.00-043.

Evaluated by: grA~

4e, 7-eexzeý Date: atZIZ I*

jr('Or~A '~UY\e I  !

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 23 of 105

Sheet 3 of 3 Status: Y* N-] U[]

Seismic Walkdown Checklist (SWC)

Equipment ID No. 1N10054A Equip. Class' 8 (MOV/SOV)

Equipment Description C-Leg Accum A DischargeIsol.

Photographs Note:

Note: Note:

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 24 of 105

Sheet I of 4

.Status: YZ N[ UD]

Area Walk-By Checklist (AWC)

Location: Bldg. CVI Floor El. 562 Room, Area, DEG 40 RAD 55 ACLA Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results of judgments and findings.

Additional space is provided at the end of this checklist for documenting other comments.

Components: Equipment ID Description Columi n Line or Other Location Info 1N1438A Emer N2 From CLA A to INC-34A Deg 40 Rad 55 ACLA

1. Does anchorage of equipment in the area appear to be free of YS Nn ULI N/An-potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

2. Does anchorage of equipment in the area appear to be free of significant YZ NCi Ur-D N/AD-degraded conditions?

3. Based on a visual inspection from the floor, do the cable/conduit YOJ N[3 UD N/AD-raceways and HVAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear to be inside acceptable limits)?

All cables appearadequately anchoredand supported.

I If the room in which the SWEL item is located is very large (e.g., Turbine Hall), the area selected should be described.

This selected area should be based on judgment, e.g., on the order of about 35 feet from the SWEL item.

AWC- IN1438A.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 25 of 105

Sheet 2 of 4 Status: Y[ N[I U Area Walk-By Checklist (AWC)

Location: Bldg. CVJ Floor El. 562 Room, Area, DEG 40 RID .55 ACLA

4. Does it appear that the area is flee of potentially adverse seismic spatial Yg NM"t U- N/A' interactions with other equipment in the area (e.g., ceiling tiles and lighting)?

5. Does it appear that the area is free of potentially adverse seismic Y9 NOI UU NIAE interactions that could cause flooding or spray in the area?

6. Does it appear that the area is free of potentially adverse seismic Y& NOi UD N/Al interactions that could cause a fire in the area?

(,

7. Does it appear that the area is free of potentially adverse seismic Y& N-I UIMI N/AOl interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.g., scaffolding, lead shielding)?

8. Have you looked for and found no other seismic conditions that could YS No U-adversely affect the safety functions of the equipment in the area?

Comments (Additional pages may be added as necessary)

Some boron deposits were noted on tubing connected to INIPT5050, about 10' above floor, near an elbow. Not a seismic issue, but wrote work request to clean / repair as needed.

AWC. I NI43gA.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 26 of 105

Sheet 3 of 4

.. . . .. ... . .. . ... Status: YCD - NEI U --

Area Walk-By Checklist (AWC)

Location: Bldg. CV] Floor El. 562 Room, Area' DEG 40 RAD 55 ACLA Evaluated by: T s]? Foa Lei'ch / " Date: _.__-_i _____

Raymnond Funp7 pa- hlcýý Date: Z7-/ 2, AWC - IN!438A.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 27 of 105

Sheet 4 of 4 Status: YE] Nf] U0]

Area Walk-By Checklist (AWC)

Location: Bldg. CV1 Floor El. 562 Room, Area, DEG 40 RAD 55 ACLA Note: Boron deposits on tube attached to Note:

INIPT5050. See Comments.

Note: Note:

AWC - IN1438A.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 28 of 105

Sheet i of 3 Status: YZ NE] ULI Seismic Walkdown Checklist (SWC)

Equipment ID No. 1N1438A Equip. Class, 8 (MOV/SOV)

Equipment Description Emer N2 From CLA A to 1NC-34A Location: Bldg. CV1 Floor El. 562 Room, Area DEG 40 RAD 55 ACLA Manufacturer, Model, Etc. (optional but recommended) Kerotest 09J-510 Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWVEL. The space below each of the following questions may be used to record the results ofjudgmenis and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage I. Is the anchorage configuration verification required (i.e., is the item one YO NZ of the 50% of SWEL items requiring such verification)?

2. Is the anchorage free of bent, broken, missing or loose hardware? YE] NE UE N/AZ

3. Is the anchorage free of corrosion that is more than mild surface YE NE U0 NI/A oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors? YO NE UOt N/Az

5. Is the anchorage configuration consistent with plant documentation? YO NO UE N/A[D (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of potentially adverse seismic conditions?

'Enter the ccuipmenl class name from Appendix B: Classes of Equipment.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 29 of 105

Sheet 2 of 3 Status: Y[ NEI U7 Seismic Walkdown Checklist (SWC) (t -..

Equipment ID No. IN1438A Equip. Class, 8 (MOV/SOV)

Equipment Description Emer N2 From CLA A to INC-34A Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YZ1 NO UD N/AD]

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZl ND U[3 N/AD and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? YZ NDI UDI N/AD

10. Based on the above seismic interaction evaluations, is equipment free YZ NO UD of potentially adverse seismic interaction effects?

(

Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ ND UD adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Reference CN-1491-NI102 Evaluated by: 7;ý17onS R L24-zm-A iofr-Zýi~ Date: /2/3.?/,

N I ,-

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 30 of 105

Sheet 3 of 3 Status: Y] N-] UE-Seismic Walkdown Checklist (SWC)

Equipment ID No. 1N;438A E->i;P. Ciav's 8 (,,OV/SOV)

Equipment Description Emer N2 From CLA A to 1NC-34A Photographs Note: 1N1438A Note:

Note:

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 31 of 105

Sheet . of 4 Status: YZ N7 UE-Area Walk-By Checklist (AWC)

([.. " ..

Location: Bldg. CV] Floor El. 567 Room, AreaI DEG 176 RAD 50 -Room FNBC Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results ofjudgments and findings.

Additional space is provided at the end of this checklist for documenting other comments.

Components: Equipment ID Description Column Line or Other Location Info IND2A ND Pump IA Suction From LOOP B Deg 176 Rad 50 I. Does anchorage of equipment in the area appear to be free of YS NEI UL N/AO potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

2. Does anchorage of equipment in the area appear to be free of significant Y[ NO- U-- N/A-degraded conditions?

(

3. Based on a visual inspection from the floor, do the cable/conduit YE NE UC N/AC raceways and HVAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear to be inside acceptable limits)?

There are two cables.thatrun from IND37A and go thru an electray marked 440722. This electray has missing or loose,fasteners that need resecurement to existing unistrut to.restore.compliance.with the.

electricalmounting~spec. Also the cables.in the tray need.inspection and reattachment of tray tie:wiresin a'few locations; The condition as.

found is capable of performing .its design function, because.the-cable connections are-still intact and not currently in a position that will cause their integrity to be compromised. A work request has.been -generated requesting repairto install/replace the fastener as necessary to restore compliance with the spec.

IIf the room in which the SWEL item is located is very large (e.g., Turbine Hall), the area selected should be described.

This selected area should be based on judgment, e.g., on the order of about 35 feet from the SWEL item.

AWC- IND2ADOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 32 of 105

Sheet 2 of 4

-Status: [YZ NE-UI--

Area Walk-By Checklist (AWC)

Location: Bldg. CVI Floor El. 567 Room, Area' DEG] 76 RAD 50 -Room FNBC

4. Does it appear that the area is free of potentially adverse seismic spatial Y& NEl U[] N/All interactions with other equipment in the area (e.g., ceiling tiles and lighting)?

5. Does it appear that the area is free of potentially adverse seismic YED N[- U[ N/AD interactions that could cause flooding or spray in the area?

6. Does it appear that the area is free of potentially adverse seismic Y* Ni-) UE N/AO interactions that could cause a fire in the area?

7. Does it appear that the area is free of potentially adverse seismic Y0 N[l UG N/AU interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.g., scaffolding, lead shielding)?

S. Have you looked for and found no other seismic conditions that could Y(S NC3 U[G adversely affect the safety functions of the equipment in the area?

Comments (Additional pages may be added as necessary)

See item 3 above. Similar condition found on valve IND2A is described in SWC for that component.

Repair called for in item 3 above was completed on 12/11/2012 per work order 02070453.

AWC. IND2A.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 33 of 105

Sheet 3 of 4 Status: Y[- N-- UD]

Area Walk-By Checklist (AWC)

.

Location: Bldg. CV] Floor El. 567 Room, Area' DEG 176 RAD 50 -Room FNBC Evaluated by: Thonicis R Leilch 2Z!22 Date: A ~/

zK2 _13~

AWC- I ND2A.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 34 of 105

Sheet 4 of 4 Status: Yi ND] U-'

Area Walk-By Checklist (AWC)

Location: Bldg. CVL Floor El. 567 Room, Area, DEG /76 R1ID 50 -Room FNBC Note: Tray needing reattachmentto unistrut. Note:

Note: Note:

AWC- I ND2A.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A P ag@e35 of 105

Sheet I of 4 Status: YZ NM UM Seismic Walkdown Checklist (SWC)

Equipment ID No. 1ND2A Equip. Class' 8 (MOV/SOV)

Equipment Description. ND Pump 1A Suction from LOOP B Location: Bldg. CVI Floor El. 567 Room, Area DEG 176 RAD 50. -RM FNBC Manufacturer, Model, Etc. (optional but recommended) Bor Warner.09J-201 Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The spacebelow each of the following questions may be usedto record the results of judgments and findings. Additional space is provided at the end of this.checklist for documenting. other comments.

Anchorage I. Is the anchorage configuration verification required (i.e., is the item one YD NE of the 50% of SWEL items requiring such verification)?

2. Is the anchorage free of bent, broken, missing. or loose hardware? YO N- UL]1 N/A0

. . the anchorage free o1corrosion that is more than mild surface YLj NO UO N/A0

(,xidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors? Y[-1 N-1 UO N/Az

5. Is the anchorage configuration consistent with plant documentation? Y[:) NO U[ N/A[D (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of Y[3 NO UE-potentially adverse seismic conditions?

IEnter the equipment class name from Appendix B: Classes of Equipment.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 36 of 105

Sheet 2 of 4 Status: Y-- NEI UM Seismic Walkdown Checklist (SWC)

Equipment ID No. 1ND2A Equip. Class' 8 (MOV/SOV)

Equipment Description ND Pump 1A Suction from LOOP B Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YO NE U3 N/AO S. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y13 NO U- N/A-and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? Y9 NO UO N/AD

10. Based on the above seismic interaction evaluations, is equipment free YS NEtUE of potentially adverse seismic interaction effects?

(".j Other Adverse Conditions I1. Have you looked for and found no other seismic conditions that could YED Nr U[iE adversely affect the safety functions of the equipment?

There are Nuclear Safety Related cables that run from the valve operatorthen thru an electray and into a junction box. The box was originally fastened to a piece of unistrut that goes to an embedment in the wall. These fasteners have come loose. As a result the electray is also loose, and the cables.would be.thesupportfor the box if it tried to fall off the unistrut.

Comments (Additional pages may be added as necessary)

See item II. The box weighs less than 20# and the cables all have metaljackets that are robust and undamaged. A work request was written to repairthese items before the end of the outage, but the condition as found was judged capable of performing its design function. (supply of power to the valve operator). Repair was completed on 12/11/2012 per work order02070468.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 37 of 105

Sheet 3 of 4 Status: YZ N-- UFZ Seismic Walkdown Checklist (SWC)

Equipment ID No. 1ND2A Equip. Class' 8 (MOV/SOV)

Equipment Description ND Pump IA Suction from LOOP B Evaluated by: '7-A, 3*L* < R / , 4,,4 Z"ý4 Date: IZ//&'Ztel z-p L.A A / - `ý/ --le'V-3 CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 38 of 105

Sheet 4 of 4 Status: Y[g N-] U[]

Seismic Walkdown Checklist (SWC)

Equipment ID No. IND2A Equip. Class' 8 (MOV/SOV)

Equipment Description NQ Pump IA Suction from LOOP B Note: Box needing reattachmentto unistrut. Note:

Note:

Note: Note:

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 39 of 105

Sheet I of 4 Status: Y1,71 NEI U[

Area Walk-By Checklist (AWC)

Location: Bldg..CV/ Floor El. 568 Room, Area, DEG 176 I-4D 25 -Room LC Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results of judgments and findings.

Additional space is provided at the end of this checklist for documenting other comments.

Components: Equipment ID Description Column Line or Other Location Info INDIB ND Pump IA Suction from Lp B DEG 176 Rad 25 El 568 I. Does anchorage of equipment in the area appear to be free of YZ NC UO N/AOI potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

2. Does anchorage of equipment in the area appear to be free of significant YZ NO7 UO N/AO degraded conditions?

3. Based on a visual inspection frlom the floor, do the cable/conduit YZ NO UO N/A.

raceways and HVAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear to be inside acceptable limits)?

'If the room in which the SWEL item is located is very large (e.g., Turbine Hall), the area selected should be described.

This selected area should be based on judgment, e.g., on the order of about 35 feet from the SWEL item.

AWC- INDIB.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 40 of 105

Sheet 2 of 4

-S-ius: YI -N -]0['

Area Walk-By Checklist (AWC)

Location: Bldg. CV] Floor El. 568 Room, Area, DEG 176 RAD 25 -Room LC

(

4. Does it appear that the area is flee of potentially adverse seismic spatial YZ NEI U- NtAM interactions with other equipment in the area (e.g., ceiling tiles and lighting)?

5. Does it appear that the area is free of potentially adverse seismic Y(D NEI UC N/AO interactions that could cause flooding or spray in the area?

6. Does it appear that the area is free of potentially adverse seismic YZ NO UO NIAr interactions that could cause a fire in the area?

(

7. Does it appear that the area is free of potentially adverse seismic YZJ NEI UO N/AO interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.g., scaffolding, lead shielding)?

8. Have you looked for and found no other seismic conditions that could YS No UO adversely affect the safety functions of the equipment in the area?

Noted some small tubing that may have been disturbed from original position. Condition is fine, no kinks or tight bends noted, seismic function is maintained.

Comments (Additional pages may be added as necessary)

Temporary lead shielding appears to be well secured in place.

AWC- INDI B.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 41 of 105

Sheet '3of 4 Status: YE NM UD Area Walk-By Checklist (AWC)

Location: Bldg. CV] Floor El. 568 Room, Area, DEG 176 RAD 25 -Room LC Evaluated by: Thomas R Leitch "-Tz-/ /? Date: Z/2  ?/ ,S RqVIo017CFI1I Date.:

AWC - INDIB.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 42 of 105

Sheet 4 of 4 Status: Y[ NE] U[]

Area Walk-By Checklist (AWC)

Location: Bldg. CVI Floor El. 568 Room, Area' DEG 176 RPD 25 -Room LC Note: Disturbed Tubing Note: Note:

AWC- I NDIB.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 43 of 105

Sheet I of 3 Status: YZ NEI U[-

Seismic Walkdown Checklist (SWC)

Equipment ID No. INDIB Equip. Class, 8 (MO.V/SOV)

Equipment Description ND Pump 1A Suction from LOOP B Location: Bldg. CV1 Floor El. 568 Room, Area DEG 176 RAD 25 -Room LC Manufacturer, Model, Etc. (optional but recommended) Borg Warner 09J-201 Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on'the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YD* NN5 of the 50% of SWEL items requiring such verification)?

2. Is the anchorage free of bent, broken, missing or loose hardware? YI- NEI UD N/A0

3. Is the anchorage free of corrosion that is more than mild surface YD3 N[D UD N/AZ oxidation?

4. ls the anchorage free of visible cracks in the concrete near the anchors? YO NEI U- N/AZ

5. Is the anchorage configuration consistent with plant documentation? YO ND UD N/AN (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of YZ ND UD potentially adverse seismic conditions?

I Entcr the equ~ipment class name from Appendix 13:Classes of Equipimcnt.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 44 of 105

Sheet 2 of 3 Status: YED NEI U[-

Seismic Walkdown Checklist (SWC) (i Equipment ID No. INDIB Equip. Class' 8 (MOV/SOV)

Equipment Description ND Pumo IA Suction from LOOP B Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YO NE UO] N/AL

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YS NO UL- N/AL]

and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? YZ NEl UL] N/AL]

10. Based on the above seismic interaction evaluations, is equipment free Y9 NO Ul]

of potentially adverse seismic interaction effects?

. '

Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ NEI U-adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Congested area. Radiation Shielding blocked direct view of piping. All items going to the valve looked secure. Ref CN-1491-ND.O0-003.

Evaluated by: Thomas R Leitch - Date: /,// 3/2-,2

,o----

1Ž /2VIL CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 45 of 105

M Sheet 3 of 3 Status: YZ N[- U0' Seismic Walkdown Checklist (SWC)

Equipment ID No. IND1B Equip. Class, 8 (MOV/SOV)

Equipment Description ND Pump 1A Suction from LOOP B Note:

Note:

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 46 of 105

Sheet I of 4 Status: YZ NF-UF Area Walk-By Checklist (AWC)

Location: Bldg. CV1 Floor El. 635 Room, Area' DEG I05 ?RAD R37 - Top ofPZR Cavity Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results ofjudgments and findings.

Additional space is provided at the end of this checklist for documenting other comments.

Components: Equipment ID Description Column Line or Other Location Info INC34A PZRPORV Deg 105 Rad 37 El 635 INC32B PZR PORV Deg 107 Rad 38 El 635 INC36B PZR PORV Deg 101 Rad37 E1635 I. Does anchorage of equipment in the area appear to be free of YO* NO UE] N/A[-

potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

2. Does anchorage of equipment in the area appear to be free of significant YO Nil Ui] N/AOD degraded conditions?

3. Based on a visual inspection from the floor, do the cable/conduit YlZ NOI UO N/AO raceways and HVAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear to be inside acceptable limits)?

If the room in which the SWEL item is located is very large (e.g., Turbine Hall), the area selected should be described.

This selected area should be based on judgment, e.g., on the order of about 35 feet from the SWEL item.

AWC- INC34A.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 47 of 105

Sheet 2 of 4 Status: YM NME UE]

Area Walk-By Checklist (AWC)

Location: Bldg. CVQ Floor El. 635 Room, Area' DEG 105 RAD R37- Tog of PZR Cavit"

4. Does it appear that the area is free of potentially adverse seismic spatial YO ND U-- N/A[D interactions with other equipment in the area (e.g., ceiling tiles and lighting)?

No Tiles or lighting

5. Does it appear that the area is free of potentially adverse seismic YO NEI UI- N/AD) interactions that could cause flooding or spray in the area?

6. Does it appear that the area is free of potentially adverse seismic YZ NEI UCI N/ACD interactions that could cause a fire in the area?

7. Does it appear that the area is fi'ee of potentially adverse seismic YO NE] UDI N/ADI interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.g., scaffolding, lead shielding)?

8. Have you looked for and found no other seismic conditions that could YZ NDI UDI adversely affect the safety functions of the equipment in the area?

Comments (Additional pages may be added as necessary)

Area is very congested, but system clearances are maintained, and all anchorage, cabling, and tubing appears in good condition and properly supported.

AWC - I NC34A.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 48 of 105

Sheet 3 of 4 Status: Y -[NM UM Area Walk-By Checklist (AWC)

Location: Bldg. CVI Floor El. 635 Room, Area DEG .105 RAID R37- Top ofPZR Cavity Evaluated, by: TLhomas R Leitch Ap, Date: Z/,z ?/Zo//3 Paymond Fing Date: ~ 2~

AWC- INC34A.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 49 of 105

Sheet 4 of 4 Status: Y[ NF-- U-Area Walk-By Checklist (AWC)

Location: Bldg. CVI Floor El. 635 Room, Area, DEG 105 RAD R37 - Top of PZR Cavit Photographs Note:

Note:

AWC - I NC34A.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 50 of 105

- Sheeti -of 3 --

Status: YZ ND ur--

Seismic Walkdown Checklist (SWC)

(.. .

Equipment ID No. INC34A Equip. Class:

Equipment Description PZR PORV Location: Bldg. CV1 Floor El. 635 Room, Area DEG 105 RAD R37-Top of PZR Cavity Manufacturer, Mode), Etc. (optional but recommended) CMI Instructions for Completing.Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YO No of the 50% of SWEL items requiring such verification)?

2. Is the anchorage free of bent, broken, missing or loose hardware? YOl NO UD N/AZ C

3. Is the anchorage free of corrosion that is more than mild surface YO-l Ni] UOI N/AZ oxidation?

4. Is the anchorage free of visible cracks in the concrete near tlhe anchors? YiO NO] UI] N/AZ

5. Is tihe anchorage configuration consistent with plant documentation? YO] NED UO N/A0D (Note: This question only applies if the item is one of the 50% for which art anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of Y0 NI UOI potentially adverse seismic conditions?

Enter the equipment class name from Appendix 13: Classes of E.quipment.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 51 of 105

Sheet 2 of 3 Status: YZ N71 U7 Seismic Walkdown Checklist (SWC)

Equipment ID No. INC34A Equip. Class' Equipment Description PZR PORV Interaction Lffects

7. Are soft targets fi'ee from impact by nearby equipment or structures? YI ND UD N/AU

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y[ NO U[D N/AD and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? YO ND UD N/AD

10. Based on the above seismic interaction evaluations, is equipment free YZ NO UC3 of potentially adverse seismic interaction effects?

Other Adverse Conditions

13. Have you looked for and found no other seismic conditions that could Y[ NFD1 UD-l adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessamy)

This component is removed/rebuilt on a regularschedule. Also, ref drawing CN-1491-07.00-30.

Evaluated by: '7",o a.'- Date: I72,/3/0ofZ--

Uw L;>

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 52 of 105

Sheet 3 of 3 Status: YZ NI- UE" Seismic Walkdown Checklist (SWC)

Equipment ID No. INC34A Equip. Class, 7 (AOVW Equipment Description PZR PORV P

Note:

Note: Note:

CNC-1206.03-00-0203 Rev I Attachment 7A Page 53 of 105

Sheet i of 3 Status: YZJ NO UD Seismic Walkdown Checklist (SWC)

Equipment DD No. INC32B Equip. Class, 7 (AOV)

Equipment Description PZR PORV Location: Bldg. CV1 Floor El. 635 Room, Area DEG 107 RAD R38 - Top of PZR Cavity Manufacturer, Model, Etc. (optional but recommended) CCI Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YD N1 of the 50% of SWEL items requiring such verification)?

Line mounted item.

2. Is tle anchorage free of bent, broken, missing or loose hardware? Y[- NO U- N/AM

3. Is the anchorage free of corrosion that is more than mild surface YO Ni UI- N/AZ oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors? YDi NiD VO N/A0

5. is the anchorage configuration consistent with plant documentation? YO NEi) Ui N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is [lie anchorage free of Y[D NO UO potentially adverse seismic conditions?

Enter the equipment class name fnom Appendix B: Classes of Lquipmen.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 54 of 105

Sheet 2_Of 3 Status: Y[ N-- UEý Seismic Walkdown Checklist (SWC)

..

Equipment ID No. INC32B Equip. Class' 7 AOV)

Equipment Description PZR PORV Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? Y1Z ND UD N/AD

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ ND-) UD N/AD and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? Y3 ND UD N/AD

10. Based on the above seismic interaction evaluations, is equipment free YED ND UD of potentially adverse seismic interaction effects?

(

Other Adverse Conditions

]1. Have you looked for and found no other seismic conditions that could YZ NDI UED adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Evaluated by:_, , j ~t9 /'*~.-~ Date: /__/ _____"'

~I 1.7-1131 2wl 2,

(.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 55 of 105

Sheet 3 of 3 Status: YZ N7 UE]

Seismic Walkdown Checklist (SWC)

Equipment ID No. 1NC32B Equip. Class, 7 (AOV)

Equipment Description PZR PORV Photographs Note:

Note: Note:

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 56 of 105

Sheet i-of3- - .

Status: Y[ N[-- UE-Seismic Walkdown Checklist (SWC) (' *.

Equipment ID No. INC36B Equip. Class:

Equipment Description PZR PORV Location: Bldg. CV1 Floor El. 635 Room, Area DEG 101 RAD R37- Top of PZR Cavity Manufacturer, Model, Etc. (optional but recommended) CCI Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required (i.e., is the item one YE- NZ of the 50% of SWEL items requiring such verification)?

Line mounted item.

2. Is the anchorage free of bent, broken, missing or loose hardware? YE NEI UD N/AO Studs and nuts attaching valve assembly to line mounted portion of valve are all there and in excellent condition.

(.

3. Is the anchorage free of corrosion that is more than mild surface YE NE U[-E N/AIA oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors? YE NEI UE N/A[D

5. Is the anchorage configuration consistent with plant documentation? YE NE UE N/At9 (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of Y0 NEO U potentially adverse seismic conditions?

Enter tlfc cquipment class name from Appendix B: Classes of Equipment.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 57 of 105

Sheet 2-of 3 Status: YZ ND-- U-]

Seismic Walkdown Checklist (SWC)

Equipment ID No. INC36B Equip. Class .7 (AOV)

Equipment Description PZR PORV Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YS NS3 US N/AO

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y[I NED US- N/A-and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? YZ NO US N/AS

10. Based on the above seismic interaction evaluations, is equipment free Y* NO US of potentially adverse seismic interaction effects?

Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ NEI US adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Congested area. All items in good condition and installed correctly. This component is worked on/rebuilt regularly.

Evaluated by: "---4 /6 - Date: __________-

P V

-- 13k2012Ž--

-

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 58 of 105

Sheet 3 of 3 Status: YN N[- UE-"

Seismic Walkdown Checklist (SWC)

Equipment ID No. INC36B Equip. Class' Equipment Description PZR PORV Photographs Note: 1NC36B Note:

Note: Note:

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 59 of 105

Sheet I of 4 Status Y NE uE]

(AWC)

Area Walk-By Checklist SLocation: Bldg. C11] Floor El. 568 Room. Area1 DG 244 R/D 47 - Room PCH-A Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results of judgments and findings.

Additional space is provided at the end of this checklist for documenting other comments.

Components: Equipment ID Description Column Line or Other Location Info IFW8 Refueling Cavity Drain Deg 244 Rad 47 El 568 I. Does anchorage of equipment in the area appear to be free of YE ND UD: N/AD potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

2. Does anchorage of equipment in the area appeal to be free of significant Y25 NDI UO N/AD degraded conditions?

3. Based on a visual inspection friom thle floor, do the cable/conduit YE ND3 UD N/AD raceways and HVAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear to be inside acceptable limits)?

IIf the room in which the SWEL item is located is very large (e.g., Turbine Hall), the area selected should be described.

This selected area should be based on judgment, e.g., on the order of about 35 feet from the SWEL item.

AWC. IWs&DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 60 of 105

Sheet 2 of 4 Status: Y0 N[] U-Area Walk-By Checklist (AWC)

(..

Location: Bldg. CVI Floor El. 568 Room, Area' DEG 244 RAD 47 - B0oon OPHA

4. Does it appear that the area is free of potentially adverse seismic spatial Y2 ND UO N/AO interactions with other equipment in the area (e.g., ceiling tiles and lighting)?

5. Does it appear that the area is free of potentially adverse seismic YtD ND UD N/AD interactions that could cause flooding or spray in the area?

6. Does it appear that the area is free of potentially adverse seismic Y9* ND Ur N/AD interactions that could cause a fire in the area?

(i I

7. Does it appear that the area is free of potentially adverse seismic Y[ NO U- N/AfD interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.g., scaffolding, lead shielding)?

8. Have you looked for and found no other seismic conditions that could YZ ND UO adversely affect the safety functions of the equipment in the area?

(..*

AWC- 1 WS.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 61 of 105

Sheet 3 of 4 Status: Y NEI U1 Area Walk-By Checklist (AWC)

Location: Bldg. CVI Floor El. 568 Room, Area, DEG 244 RI&D 47 - Room PCHA Comments (Additional pages may be added as necessary)

Noted I VP7A - First tubing clamp off operator is loose- see pictures. This is a VI tubing clamp on the line attached to 1V13690. Tubing is still supported by clamp. Wrote work request 01075428 to tighten/repair.

I VY I7A - 4 inch VY (H2 sample and purge) pipe elbow is close to a Nuclear Safety Related cable junction box. Pipe seems rigid, and cable junction box could tolerate some contact, as it can flex somewhat. There is approx. 'A" clear currently. There is some slack in the cables, and the junction box is mounted on 4" electray that is mounted on unistrut.

This electric junction box assembly is not very massive, and seismic movement would be minimal due to stiffness of unistrut support. The piping is restrained in the lateral direction by two supports , I-A-VY-4008 and I-A-VY-4234, so lateral seismic motion of the piping should be negligible. See Photo.

Evaluated by: Thomas R Leilch //( X*

• Date: 02/18/2013 A\VC- I MW.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 62 of 105

Sheet 4 of 4 Status: Y* NO U]

Area Walk-By Checklist (AWC)

Location: Bldg. CV] Floor El. 568 Room, Areal DE(J 244 RAD 47 - Room PCHA Photographs

[Note: intls valve is near 4in eloow snown Loeiow j Note: m-rst wo~ing ciamp OTT tflis operator isloose.]

[Note: tlmow is close to junction box. I [Note: Loose I umng ciamp is attachect to support shown on right.

AWC- IFWS.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 63 of 105

Sheet i of 3 Status: Y[D N[-] UFE Seismic Walkdown Checklist (SWC)

Equipment ID No. IFW8 Equip. Class, 00 (Other)

Equipment Description Refueling Cavity Drain Location: Bldg. CV1 Floor El. 568 Room, Area DEG 244 RAD 47 - Room PCHA Manufacturer, Model, Etc. (optional but recommended) Westinghouse 09D-210 Instructions for Completing. Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following, questions may be used to record the results of judgments and findings. Additional space.is. provided at the'end of this checklist for documenting other comments.

Anchorage

1. Is the anchorage configuration verification required.(i.e., is the item one YD NO of the 50% of SWEL items requiring such verification)?

2. Is the anchorage free of bent, broken, missing or loose hardware? YET. NIO UO N/AZ

3. Is the anchorage free of con'osion that is more than mild surface YOI NO ULI N/AZ oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors? YI] NO U- N/AO

5. Is the anchorage configuration consistent with plant documentation? YO NO UO N/AI (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of YO NEI UO potentially adverse seismic conditions?

IEmer the cquipment class name from Appendix 13: Classes of Equipment.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 64 of 105

_ -- Sheet 2of3 _-

Status: Y] NM U7 Seismic Walkdown Checklist (SWC)

(. I Equipment ID No. 1FW8 Equip. Class, 00 (Other)

Equipment Description Refueling Cavity Drain Interaction Effects

7. Are soft targets free fr'om impact by nearby equipment or structures? YZ] NO" UrI N/Al

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NO UOi N/A.-

and masonry block walls not likely to collapse onto the equipment?

No ceiling tiles

9. Do attached lines have adequate flexibility to avoid damage? YCI Nfl Uf N/A0 No attachedlines, this is a manual valve

10. Based on the above seismic interaction evaluations, is equipment free YZ NEI U of potentially adverse seismic interaction effects?

(. I Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ N[-I U0i adversely affect the safety functions of the equipment?

Comments (Additional pages may be addedas necessary)

See Picture. Also ref CN-1491-FWO07 Evaluated by: zetJ,//e.?/ Date: /__/3_ _ .__

CNC-1206.03-00-0203 Rev I Attachment 7A Page 65 of 105

Sheet 3 of 3 Status: Y[ N[7 U-]

Seismic Walkdown Checklist (SWC)

Equipment ID No. IFW8 - Equip. Class, 00 (Other)

Equipment Description Refueling Cavity Drain ildoie: Note:

Note: Note:

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 66 of 105

Sheet I of 4 Status: YI NE]U-Area Walk-By Checklist (AWC)

Location: Bldg.. CV1 Floor El. 563 Room, Area' DEG 300 RAD 33 - Room LC Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results of judgments and findings.

Additional space is provided at the end of this checklist for documenting other comments.

Components: Equipment ID Description Column Line or Other Location Info 1FW46 Refueling Cavity Drain Deg300 Rad 33 El 563 I. Does anchorage of equipment in the area appear to be free of Y9 Nn UU N/AO potentially adverse seismic conditions (if visible without necessarily open ing cabinets)?

2. Does anchorage of equipment in the area appear to be free of significant YO No U] N/AU degraded conditions?

(. ..)

3. Based on a visual inspection from the floor, do the cable/conduit YZJ NO U: N/AUl raceways and liNlAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill cond itions of cable trays appear to be inside acceptable limits)?

IIf the room in which the SWEL item is located is very large (e.g., Turbine Hall), the area selected should be described.

This selected area should be based on judgment, e.g., on the order of about 35 feet from the SWEL item.

AWC- I FW46.DOC CNC-1 206.03-00-0203 Rev 1 Attachment 7A Page 67 of 105

Sheet 2 of 4 Status: YZ N7 U7-Area Walk-By Checklist (AWC)

Location: Bldg. CV] Floor El. 563 Room, Area, DEG 300 RAD 33 - Room LC

4. Does it appear that the area is free of potentially adverse seismic spatial YEJ NO U7 N/AO interactions with other equipment in the area (e.g., ceiling tiles and lighting)?

S. Does it appear that the area is free of potentially adverse seismic Y& NO U) NMAO interactions that could cause flooding or spray in the area?

6. Does it appear that the area is free of potentially adverse seismic YE NO UOD N/AO interactions that could cause a fire in the area?

7. Does it appear that the area is free of potentially adverse seismic YZ NOI U-1 N/AO]

interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.g., scaffolding, lead shielding)?

8. Have you looked for and found no other seismic conditions that could YZ NOI UO adversely affect the safety functions of the equipment in the area?

Comments (Additional pages may be added as necessary)

Noted some small flexible VS lines in the area. This is not a problem due to adequate clearance and low mass.

AWC - I FW46.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 68 of 105

Sheet 3 of 4

. . . ... .. . Statues: YZ Nl-UE-Area Walk-By Checklist (AWC) i Location: Bldg. CV] Floor El. 563 Room, Area, DEG.300 RAD 33 - Room LC Evaluated by: Thomas R Leitch Date: ,/ . -.

Raymon01d Fl~ng Date: /2-

.

AWC* FW46.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 69 of 105

Sheet 4 of 4 Status: YE N[D UE Area Walk-By Checklist (AWC)

Location: Bldg. CVI Floor El. 563 Room, Area' DEG 300 RAD 33 - Room LC Photographs Note: Note:

Note:

AWC - I FW46.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 70 of 105

--- Sheet 1 of 3 Status: YZ NE UFJ Seismic Walkdown Checklist (SWC)

Equipment ID No. IFW46 Equip. Class, 00 (Other)

Equipment Description Refueling Cavity Drain Location: Bldg. CV1 Floor El. 563 Room, Area DEG 300 RAD 33- Room LC Manufacturer, Model, Etc. (optional but recommended) Westinghouse 09D-210

• Instructions for Completing Checklist This checklist may be used. todocument the results of the Seismic Walkdown of an item of equipment on the SWEL. The spacebelow each.of the following. questions may be used*to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchora?,e.

1. Is the anchorage configuration verification required (i.e., is. the item one of the 50% of SWEL items requiring such verification)?

Line mounted item.

2. Is: the anchorage free of bent, broken, missing or loosehardware? YEI NO UO N/A0

3. Is the anchorage free of corrosion that is more than mild surface YO NO U0 N/AI0 oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors? YIOI NEI UO N/AR

5. Is the anchorageconfiguration consistent with. plant documentation? Yn. NO UD N/Ag (Note: This question only applies if theitem is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of Y& NEI UD) potentially adverse seismic conditions?

IEnter the equipment class name from Appendix B: Classes of Equipment.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 71 of 105

Sheet 2 of 3 Status: YFJ NEI UD Seismic Walkdown Checklist (SWC)

Equipment IDNo. 1FW46 Equip. Class, 00 (Other)

Equipment Description Refueling Cavity Drain Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YI ND UD3 N/AD]

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NED UD N/AD-I and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? YD ND U- N/AZ Manual valve. No attached lines

10. Based on the above seismic interaction evaluations, is equipment free YED NEI UD of potentially adverse seismic interaction effects?

Other Adverse Conditions 1]. Have you looked for and found no other seismic conditions that could YZ ND) UD-adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Ref CN-1491-FWOO-004 Evaluated by: Thomas R Leitch Date: 1/73 zý!/Z_2_

I.U q I FC9I 2-CNC-1 206.03-00-0203 Rev 1 Attachment 7A Page 72 of 105

Sheet 3 of 3 Status: YZ N-D UD-I Seismic Walkdown Checklist (SWC)

(,;.,

Equipment ID No. 1FW46 Equip. Class' 00 (Other)

Equipment Description Refueling Cavity Drain Note:

"(

Note: Note:

CNC-1206.03-00-0203 Rev 1 Atachment 7A Page 73 of 105

Sheet I of 4 Status: Y No UD Area Walk-By Checklist (AWC)

Location: Bldg. RN] Floor El. 557 Room, AreaI DEG 280 REG60,?

Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results of judgments and findings.

Additional space is provided at the end of this checklist for documenting other comments.

Components: Equipment ID Description C.olumn Line or Other Location Info INVPD0042 Stnby M/U Disch Pulsa Damp Deg 278 Rad 58 El 558

!NV865A Stnby M/U Pump Suct from XFR Tube Deg 266 Rad 61. El 578 INVPUSB Standby Makeup Pump Deg 280. Rad 64 El 557

1. Does anchorage of equipment in the area appear to be free of Y(9 NEI UC N/AOl potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

2. Does anchorage of equipment in the area appear to be free of significant YO NO- UD N/AO degraded conditions?

3. Based on a visual inspection from the floor, do the cable/conduit YO NCO UFD N/AO raceways and HIVAC ducting appear to be fr'ee of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear to be inside acceptable limits)?

! If the room in which the SWEL item is located is very large (e.g., Turbine Hall), the area selected should be described.

This selected area should be based on judgment, e.g., on the order of about 35 feet from the SWEL item.

AWC- INVPUSB.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 74 of 105

Sheet 2 of 4

. Status:-YZ ND- UBý-

Area Walk-By Checklist (AWC)

Location: Bldg. RXI Floor El. 557 Room, Area' DEG 280 R-EG60R

4. Does it appear that the area is free of potentially adverse seismic spatial Y9 NO U[" N/AO interactions with other equipment in the area (e.g., ceiling tiles and lighting)?

5. Does it appear that the area is free of potentially adverse seismic Y[0 N- U" N/AO interactions that could cause flooding or spray inthe area?

( . ...

6. Does it appear that the area is free of potentially adverse seismic Y9 NO UD N/A-interactions that could cause a fire in the area?

7. Does it appear that the area is free of potentially adverse seismic Y& ND UD:] N/AD interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.g., scaffolding, lead shielding)?

S. Have.you looked for and found no other seismic conditions that could YZ NO U-adversely affect the safety functions of the equipment in the-area?

AWC - INVPUSB.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 75 of 105

Sheet 3 of 4 Status: YZ N[-l U[]

Area Walk-By Checklist (AWC)

Location: Bldg. RXI Floor El. 557 Room, Area, DEG 280 R.EG60R Comments (Additional pages may be added as necessary)

Noted lighting on Poles attached to railing on elev. 575. These items are very flexible and not likely to survive a seismic event, however, they are not heavy or massive, and no targets were identified in the area that they would impact, so this is not an issue of concern.

Also noted that minimum 2" NV system clearancestandardbetween 2 inch NV line and unistrutsupporting a small electray is not met. The NV line is on CN- 149 1-NV.00- 117, elev 562'-9", and is almost directly above the pulsation dampener.(Approx Az 277, rad 59-4"). This is not a QA 1 line, so this 2" clearance is a good practice ratherthan a requirement. This clearancecan be achieved by removing enough materialfrom the unistrut to achieve the system clearance. See Photo.

Evaluated by: Thomas R Leitch Date: ~ /~~

FUAtoA]

ýJ /2-/. 0 /1Ž AWC - I NVPUS8.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 76 of 105

Sheet 4 of 4 Status: YO No UC]

Area Walk-By Checklist (AWC)

Location: Bldg. RXI Floor El. 557 Room, Area' DEG 280 REG60R Photographs Note: NV System Clearancenot met. Per Note:

MP/OIA/7650/153, good practiceclearance for 250 degree NV line is 2". (Not required, since line is not QA 1, just good practice) k Note: Note:

AWC - I NVPUSB.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 77 of 105

Sheeti of 4 Status: YED N-I U-Seismic Walkdown Checklist (SWC)

Equipment ID No. 1NVPDO042 Equip. Class, 00 (Other)

Equipment Description Standby Makeup DischargePulsation Dampener Location: Bldg. RX1 Floor El. 558 Room, Area DEG 278 RAD 58 Manufacturer, Model, Etc. (optional but recommended) Metal Bellows Div Senior 76016 Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipmenton the SWEL. The space below each of the following questions may- be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchorage I. Is the anchorage configuration verification required (i.e., is the item one YE1 NO of the 50% of SWEL items requiring such verification)?

2. Is the anchorage free of bent, broken, missing or loose hardware? YE-) NE UE N/A[0

3. Is the anchorage free of corrosion that is more than mild surface YO NE UE- N/A[D oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors? YE-- NE UE1 N/A[D

5. Is the anchorage configuration consistent with plant documentation? YE NE UE) N/AZ (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of YZ NE U-potentially adverse seismic conditions?

I Enter the equipment class name from Appendix B: Classes of Equipment.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 78 of 105

Sheet 2 of 4 Status: YE NEI UFI Seismic Walkdown Checklist (SWC)

Equipment ID No. INVPDO042 Equip. Class, 00 (Other)

Equipment Description Standby Makeup DischargePulsation Dampener Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YO NO UO N/AO

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, Y0 NO UO N/AO and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? YED NO UO N/AO

10. Based on the above seismic interaction evaluations, is equipment free YZ NO U(-)

of potentially adverse seismic interaction effects?

(....)

Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YIENO Un adversely affect the safety functions of the equipment?

Noted one spring can from vertical trapeze support that is supporting the pulsation dampener is almost touching the metal belt guard on the PD pump. There are two Type A B268 spring cans, and one is only 1/8" clear of the. metal.belt guard for the PD.pump. The can.weights no more than 15#.-aad it is P verticalsupport,so its horizontalseismic motion is.limitedby rodstension and.restraint.at.the~top and bottom of the can. Some.limited:minorseismic interaction with the belt.guard is possible; but the potential unrestrained(no.interaction)horizontal.

motion would not be likely to.exceed X" since.the :seismic driving.force involved should be Jess-than one-G. This.could:resultin minimal seismi interaction with-the metal belt guard; but the..guard:appears..

robust enough to withstand the small forces.involved:without significant damage. Also, the pump is radwaste related (QA2) but it is not designed as seismically supported, and the piping .supportedby the spring cans is class E and supportedper Construction requirements, which are also non seismic. These items are both part of SWEL 2, not SWEL 1. See photo.

CNC-1206.03-00-0203 Rev 1 Aftachment 7A Page 79 of 105

Sheet 3 of 4 Status: Y" ND UH Seismic Walkdown Checklist (SWC)

Equipment ID No. INVPDO042 Equip. Class' 00 (Other)

Equipment Description Standby Makeup Discharge Pulsation Dampener Com ments (Additional pages may be added as necessary)

Ref Drwgs CNM-1201.04-0174.001 and CN-1491-NV,00-117. Pulsation dampenerwas recently replacedby mod EC 102855.

Evaluatedby: Thomas R Leitch.*'-%, " Date: 6;z/,'9 &

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 80 of 105

Sheet 4 of 4 Status: YZ NO U-Seismic Walkdown Checklist (SWC)

Equipment ID No. INVPDO042 Equip. Class' 00 (Other)

Equipment Description Standby Makeup Discharge Pulsation Damoener Note: PD support and left spring. Note: PulsationDmee upr Note: Right spring close to belt guard. Note:

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 81 of 105

-p

Sheet I of 3 Status: YZ NED U-Seismic Walkdown Checklist (SWC)

Equipment 1D No. 1NV865A Equip. Class, 8 (MOV)

Equipment Description Standby M/U Pump Suction from XFR Tube Location: Bldg. ANM Floor El. 578 Room, Area DEG 266 RAD 61 Manufacturer, Model, Etc. (optional but recommended) Borg Warner 05B-262 Instructions for Completing Checklist This checklist may be used todocument the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the-following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for dbcumenting other comments.

Anchorage.

1. Is the anchorage configuration verification required (i.e., is the item one Y- No of the 50% of SWEL items requiring such verification)?

2. Is the anchorage free of bent, broken, missing.or loose hardware? Y12 NEI UO. N/AZ

3. Is the anchorage free of corrosion that is more than mild surface YOI NO] UOZ N/AZ oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors? YO-\ Ni UI- N/AZ

5. Is the anchorage configuration consistent with plant documentation? YO NiO UD N/A0 (Note: Thisquestion only applies if the item is one of the 50% for which an anchorage. configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of YNINI U potentially adverse seismic conditions?

3Enter the equipment class name from Appendix B: Classes of Equipment.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 82 of 105

Sheet 2- of 3 Statu.s YZJ ND U0-Seismic Walkdown Checklist (SWC)

Equipment ID No. 1NV865A Equip. Class3 8 (MOV)

Equipment Description Standby M/U Pumn Suction from XFR Tube Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YZ NO UO] N/Al

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YO NE] UE- N/AO and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? YEI NEI Ur N/AOl

10. Based on the above seismic interaction evaluations, is equipment free YN NO UO of potentially adverse seismic interaction effects?

Other Adverse Conditions l1. Have you looked for and found no other seismic conditions that could YZ NEI UO-adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Ref drawing CN-]491-N Vi] 6.

E\,aluated by: *ý1o0.'_a5 R L1,141, /L'1_2/ý ý_ Date: /A4_13/p0.21/

IT) I-(,'&(f/js 6A~ /-d 3 6 123LZ-CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 83 of 105

Sheet 3 of 3 Status: YE NE] UD-]

Seismic Walkdown Checklist (SWC)

Equipment ED No. INV865A Equip. Class, 8 (MOV)

Equipment Description Standby M/U Pump Suction from XFR Tube Photographs Note:

I Note: 1NV Note: Note:

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 84 of 105

- S-heet I of 4 Status: Y N7. Ui Seismic Walkdown Checklist (SWC)

Equipment ID No. 1NVPUSB Equip. Class' 5 (HorizontalPurno)

Equipment Description Standby Makeup Pump Location: Bldg. RXI Floor El. 557 Room, Area DEG 280 RAD 064 Manufacturer, Model, Etc. (optional but recommended) Wheatley S/N 5P1510 Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on tile SWEL. The space below each of the following questions may be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchora2e

1. Is the anchorage configuration verification required (i.e., is the item one YID NM of the 50% of SWEL items requiring such verification)?

2. Is the anchorage free of bent, broken, missing or loose hardware? Y0 ND7- Ur N/AD

3. Is the anchorage free of corrosion that is more than mild surface Y[ ND UD N/AD oxidation?

4. Is the anchorage free of visible cracks in tile concrete near the anchors? YZ ND UD N/AD']

5. is the anchorage configuration consistent with plant documentation? Y2 NDI UD N/AD (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of Y0 NEI UPD potentially adverse seismic conditions?

SEnier the. cquipment class name from Appendix 13: Classes of Equipmcnt.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 85 of 105

Sheet 2 of 4 Status: Y[D N.I U['-

Seismic Walkdown Checklist (SWC)

Equipment ID No. INVPUSB Equip. Class' 5 (HorizontalPumo)

Equipment Description Standby Makeup Pump Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YO NO UM N/AD

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YC9 NEI U1 N/AD and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? YZ NE UD N/AD

10. Based on the above seismic interaction evaluations, is equipment free YZ NO Un of potentially adverse seismic interaction effects?

(.-,..)

Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ NO UD adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Note that Standby makeup pump support is not safety related, although it is well built and appearsto be quite sturdy. The Standby makeup:pump andthepiping leadinginto and.out of it are-classE, radwaste related, and are not seismic category 1. They were never intended.to.be seismically designed. This is acceptable due to the system design. These components were selected.for walk down as part of the SWEL .2 list, which does not have to be seismic category 1.

Ref CNM-1203.03-0080, CN-1080-22, CN-1491-07.00-08.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 86 of 105

Sheet 3 of 4

-- Status: YZ N75 Ufl Seismic Walkdown Checklist (SWC)

Equipment ID No. 1NVPUSB Equip. Class, 5 (HorizontalPumP)

Equipment Description Standby Makeup Pump Evaluated by: Thomas R. Leitch z- , *  ;  : Date: 2, Raymond C Fun.Q CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 87 of 105

Sheet 4 of 4 Status: YZ NO UE1 Seismic Walkdown Checklist (SWC)

Equipment ID No. 1NVPUSB Equip. Class' 5 (Horizontal Pump)

Equipment Description Standby Makeup Pump Photoaraphs Note: Anchorage in good condition.

Note: Note:

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 88 of 105

Sheet I of 4

.. Status:--YD- N[D UD-U Area Walk-By Checklist (AWC)

Location: Bldg. A UY Floor El. 594 Room, Area' CC-55 (Control R0oom)

Instructions for Completing Cheeldist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. The space below each of the following questions may be used to record the results ofjudgments and findings.

Additional space is provided at the end of this checklist for documenting other comments.

Components: Equipment ID Description Column Line or Other Location Info I SSPSA Solid State Protection Syst. Train A CC-56 (Control Room)

I. Does anchorage of equipment in the area appear to be free of YZ ND- UD N/AED potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

I SSPSA anchorage was visible when cabinet was opened, and one other cabinet (lELCCO058) had anchorage that was visible when cabinet was closed. No other cabinets in the walk-by area were available to be opened. Anchors that were visible were free of potentially adverse seismic conditions.(see photo)

2. Does anchorage of equipment in the area appear to be free of significant YE ND UD N/AO degraded conditions?

3. Based on a visual inspection from the floor, do the cable/conduit YO ND UO N/AD]

raceways and HVAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear to be inside acceptable limits)?

Initially, these items were not visible from the floor due to lightweight ceiling material.A subsequentwalk by was performed.to remove a sample of ceiling materialto allow visual inspectionof the cable conduit raceways and HVAC ducting in the walk by area ceiling. The HVAC Ducting and supports were in excellent condition. There are only a few cable /conduit raceways, they are not overfilled and are adequately supported.

IIf the room in which the SWEL item is located is very large (e.g., Turbine Hall), the area selected should be described.

This selected area should be based on judgment, e.g., on the order of about 35 feet from the SWEL item.

AWC- I SSPSA.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 89 of 105

Sheet 2 of 4 Status; YE: ND LID Area Walk-By Checklist (AWC)

Location: Bldg. AUX Floor.El. 594 Room, Area, CC-55 (Control Room)

4. Does it appear that the area is free of potentially adverse seismic spatial YZ NO U- N/AD-I interactions with other equipment in the area (e.g., ceiling tiles and lighting)?

Ceiling materialis very light weight and would not adversely interact due to low mass. Lighting appearsto be well secured to prevent failure during a seismic event. The lighting fixtures are also tethered with light chains to prevent them from falling.

5. Does it appear that the area is free of potentially adverse seismic Y0 Ni UD N/A-interactions that could cause flooding or spray in the area?

6. Does it appear that the area is free of potentially adverse seismic Y( NO UO N/AC interactions that could cause a fire in the area?

( 2

7. Does it appear that the area is free of potentially adverse seismic Y 9 NO-') UI- N/A-0 interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.g., scaffolding, lead shielding)?

8. Have you looked for and found no other seismic conditions that could YZ NO UD adversely affect thesafety functions of the equipment in the area?

Comments (Additional pages may be added as necessary)

A\VC- ISSPSA.DOC CNC-1206.03-00-0203 Rev I Attachment 7A Page 90 of 105

Sheet 3 of 4

-Status: Y(5[ý ND U[n Area Walk-By Checklist (AWC)

Location: Bldg. AUX Floor El. 594 Room, Area' CC-55 LConirol Room)

Evaluated by: Thomas R.Leitch " - Date: 02/20/2013 Rvymond C F.,7 AWC- ISSPSA.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 91 of 105

Sheet 4 of 4 Status: YZ N-] UM-Area Walk-By Checklist (AWC)

Location: Bldg. AUX Floor El. 594 Room, Area' CC-55 (Control Room)

Photozraphs Note: No adverse interactions. Note: light'eight ceiling material I Note: Anchors for 1ELCCO058 Note: Lighting Fixture chain tether.

AWC- ISSPSA.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 92 of 105

Sheet I of 3 Status:- YZ N --U.

Seismic Walkdown Checklist (SWC)

Equipment ID No. ISSPSA Equip. Class, 18 (Equipment Rack)

EquipmentDescription Solid State Protection System Train A Location: Bldg. AUX Floor El. 594 Room, Area CC-55 Manufacturer, Model, Etc. (optional but recommended) WestinO05678 Instructions for Completing Checklist This checklist may be used to document the results of the Seismic Walkdown of an item of equipment on the SWEL. The space below each of the following questions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchora2e

1. Is the anchorage configuration verification required (i.e., is the item one YZ NEl of the 50% of SWEL items requiring such verification)?

2. Is the anchorage free of bent, broken, missing or loose hardware? Y0 NO U- N/AO

3. Is the anchorage free of corrosion that is more than mild surface YZ NO UO N/AL oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors? YZ NO UO N/AO

5. Is the anchorage configuration consistent with plant documentation? YO NO UO NIAO (Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of YIE NO UO potentially adverse seismic conditions?

' Enter the equipment class namc from Appendix B: Classes of Equipnicnt.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 93 of 105

Sheet 2 of 3 Status: YZ N71 UD--

Seismic Walkdown Checklist (SWC)

Equipment ID No. 1SSPSA Equip. Class' 1.8 (Equipment Rack)

Equipment Description Solid State Protection System Train A Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YjZ NED UD N/AD

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ N[D UD N/AD and masonry block walls not likely to collapse onto the equipment?

Ceiling tiles appearin acceptable condition, and also are very light weight. If any were to fall, they would not have enough mass to cause damage or operate the equipment.

9. Do attached lines have adequate flexibility to avoid damage? YLZ ND UD N/AD Attached lines are cables, and there is enough flexibility to avoid damage. See Photo.

10. Based on the above seismic interaction evaluations, is equipment free YZ ND UD of potentially adverse seismic interaction effects?

(,\t" Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ NDI UD adversely affect the safety functions of the equipment?

Comments (Additional pages may be added.as necessary)

The cabinet is well anchored, and cables and fasteners are in good condition, with good sealing in floor penetration area. Reference CNC- 1139.14-19-0001, CN- 1200-10.04, CNM- 1399.08-0039-005, CN-1214-01, CN-1224-05, CN.1227-05.

Evaluated by: Thomas R Leitch , n Date: 12/06/2012 Raymond C Fung ,- Q ' 1 !Z6-L2.0 12~-

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 94 of 105

Sheet 3 of 3 Status: Y[ N UM r-I Seismic Walkdown Checklist (SWC)

Equipment ED No. 1SSPSA Equip. Class' 18 (Equipment RackJ Equipment Description Solid State Protection System Train A Note: Cables well sealed with adequateflex. Note: Load path.

h J CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 95 of 105

Sheet I of 4 Status: Y¥ ND UM Area Walk-By Checklist (AWC)

Location: Bldg. In Floor El. 560 Room, Area' AIx 560 RMn372. AA--5 Instructions for Completing Checklist This checklist may be used to document the results of the Area Walk-By near one or more SWEL items. Tile space below each of the following questions may be used to record the results of judgments and findings.

Additional space is provided at tile end of this checklist for documenting other comments.

Components: Equipment ID Description Column Line or Other Location Info 1ETXB 4160/600 VAC Trans AA-47 t.ETXD 4160/600 VAC Trans .AA-46

1. Does anchorage of equipment in the area appear to be free of YZ Nr- ULI N/AO potentially adverse seismic conditions (if visible without necessarily opening cabinets)?

2. Does anchorage of equipmeht in the area appear to be free of significant YO NOI U- N/Al3 degraded conditions? (1

3. Based on a visual inspection from the floor, do the cable/conduit Y¥9 NO-) Ur N/A[D raceways and HVAC ducting appear to be free of potentially adverse seismic conditions (e.g., condition of supports is adequate and fill conditions of cable trays appear.to be inside acceptable -limits)?

IIf the room in which the SWEL item is located is very large (e.g., Turbine Hall), the area selected should be described.

This selected area should be based on judgment, e.g., on the order of about 35 feet from the SWEL item.

AWC - I ET.XM-20M20620.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 96 of 105

Sheet 2 of 4

.......... - Status: Y LNE- UFj-.

Area Walk-By Checklist (AWC)

Location: Bldg. Ahx Floor El. 560 Room, Area' Ihux 560 Rn; 372, ,4A-5S

4. Does it appear that the area is free of potentially adverse seismic spatial Yl'[ NO Uo N/AU interactions with other equipment in the area (e.g., ceiling tiles and lighting)?

5. Does it appear that the area is free of potentially adverse seismic YE NO UO N/AU interactions that could cause flooding or spray in the area?

6. Does it appear that the area is free of potentially adverse seismic YlZ NM UU-1 N/AU interactions that could cause a fire in the area?

7, Does it appear that the area is free of potentially adverse seismic YE NO UO N/AU interactions associated with housekeeping practices, storage of portable equipment, and temporary installations (e.g., scaffolding, lead shielding)?

8. Have you looked for and found no other seismic conditions that could YON 0 UUU adversely affect the safety functions of the equipment in the area?

AWC - IETXB-20120620)ODOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 97 of 105

Sheet 3 of 4 Status: Y NDI UM Area Walk-By Checklist (AWC)

/\,..

Location: Bldg. Aux Floor El. 560 Room, Area, Aim" 560 Aim 372, AA-5]

Comments (Additional pages may be added as necessary)

Area was very neat and clean. Noted 4 hand held fire extinguishers hanging on hooks fairly low on columns in the area.

These are not likely to come off hooks during event, because the vertical component of seismic acceleration in this area is less.than Ig. Also, no significant spray targets were noted in the immediate vicinity of these devices.

A rigid cable tray support with approximately 3/8" clearance between the support and a liftinglug on IETXF was noted. (seephoto) This is acceptable by comparison, because rigid cabinets in this area will experience a lateral seismic movement of approx. 0.1 inches, and the transformer is at least as rigid asthese cabinets. Similarly, the cable tray support frame.is rigid, andseismicmovements. of approx 0.1 inches are expected. Therefore this clearance should be adequate to prevent interaction.

Evaluated by: Thomas R Leitch "

• Date: ,.3 Ravymond Fungr ...- #-f Date: 2-/Z, AA*C - i ETrxB-20120620.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 98 of 105

Sheet 4 of 4 Status: YZ NE] U17, Area Walk-By Checklist (AWC)

Location: Bldg. A1ux Floor El. 560 Roorn, Area' ilyx 560 Rm 372. AA-51 Note: alble-Ytr'ay support close to lift lug on 1ETXF. Note:

Note: Note:

I AWC - IETXJ3-20120620.DOC CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 99 of 105

Sheet I of 3 Status: YE NiD UE3 Seismic Walkdown Checklist-(SWC)

Equipment ID No. IETXB - Equip. Class, 4 (Transformers)

Equipment Description 4160/600 VAC Transformer Location: Bldg. Aux Floor El. 560 Room, Area Rm 372AreaAA-47 Manufacturer, Model, Etc. (optional but recommended) Westing house 4160-600Y/346 histructions for Completing..Cheeldist.

This checklistmay be used todocument the results of the Seismic WalkdoirN.of an item ofequipment onthe SWEL. The space below each of the, following..q uestions may be used to record the results of judgments and findings. Additional space is provided at the end of this checklist for documenting.other. comments.

Anchorage..

1. Isthe anchorage configuration verification required:(i~e., is: the item one YZ: NED.

of the 50% ofSWEL items requiring such verification)?

2. Is.the anchorage free of bent, broken, missing.or loose:hardware? Y0 NE. U0 N/AD Transformeris weldedto' W section that is. welded to steel plate which' is welded to embedments. No broken welds or bent areas were observed..

I,

3. Is the anchorage firee of corrosion that is more than mild surface YE NO UE N/AD oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors? YD NE UD NIAS There are no anchors,but the concrete is free of cracks.

5. Is the anchorage configuration consistent with plant documentation? YN NE[ UE NIAE)

(Note:.This question only applies if the iternis one of the 50% for which an anchorage .configuration verification is required.)

6. Based on the above anchorage evaluations, is the anchorage free of YE NEO UE potentially adverse seismic conditions?

I.nicr the equipment class name from Appendix B: Classes of Equipment.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 100 of 105

Sheet 2 of 3

_Status: Y{7 NI U-.

Seismic Walkdown Checklist (SWC)

Equipment ED No. 1ETXB Equip. Class' 4 (Transformers)

Equipment Description 4160/600 VAC Transformer Interaction Effects

7. Are soft targets free from impact by nearby equipment or structures? YUl NO ULI N/AO

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ NO UO N/A[I and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? Y9 NO UO N/AO

10. Based on the above seismic interaction evaluations, is equipment free YZ NO UO of potentially adverse seismic interaction effects?

Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YG) NOD UO adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Noted one cable tray support (rigid) has..only minimal clearance (approx. 1/8') from transformer cooling fin support steel. Based on comparison with rigid cabinets in this area,this could result in minimal seismic interactionbetween the fin support steel and the cable tray support. This interaction would be in the ýorder of 0.1 inches or less, since the tray support could move approx.

0.1 inches and the transformercould move: approx. 0. 1 inches, which could result in some minor yielding and distortion,primarily in the cable tray support unistrut material.

Evaluated by: Thomas R Leitch /~ -~ Date: _- _' _" _ _-

Raymond C Funo Date:

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 101 of 105

Sheet 3 of 3 Status: YZ NM u7 Seismic Walkdown Checklist (SWC)

Equipment ID No. 1ETXB Equip. Class' 4 (Transformers)

Equipment Description 4160/600 VAC Transformer Photographs Note: Minimal clearancebetween lug and cable Note:

tray support.

Note:

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 102 of 105

Sheet I of 3 Status: Y' -NR- U-Seismic Walkdown Checklist (SWC)

Equipment ID No. 1ETXD Equip. Class' 4 (Transformers)

Equipment Description 4160/600 VAC Transformer Location: Bldg. Au.K Floor El. 560 Room, Area Rm 372 Area AA-46 Manufacturer, Model, Etc. (optional but recommended) Westinq house 4160-600Y/346 Instructions for Completing Clecklist This checklist may be used todocument the results of the Seismic Walkdowvn of an item of equipment on the SWEL. The space below each of the following questions inay be used to record the results ofjudgments and findings. Additional space is provided at the end of this checklist for documenting other comments.

Anchoraqe

1. Is the anchorage configuration verification required (i.e., is the item one YS NUF of the 50% of SWEL items requiring such verification)?

2. Is the anchorage free of bent, broken, missing or loose hardware? YZ NEI UO N/AO Transformeris welded to W section that is welded to steel plate which is welded to embedments. No broken welds or bent areas were observed.

3. Is the anchorage free of corrosion that is more than mild surface YEZ NEI UO N/Afl oxidation?

4. Is the anchorage free of visible cracks in the concrete near the anchors? YO] NO U.* N/AZ The concrete is free of visible cracks near the embedded plates. The only anchors are the nelson studs that are welded to the underside of the embedded plates.

YDE NEI U] N/AO

5. Is the anchorage configuration consistent with plant documentation?

(Note: This question only applies if the item is one of the 50% for which an anchorage configuration verification is required.)

yo NOUO:NA

6. Based on the above anchorage evaluations, is the anchorage fiee of potentially adverse seismic conditions?

Enter the equipment class name from Appendix B

Classes of Equipincnt.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 103 of 105

Sheet 2 of 3 Status: YE] NM U-Seismic Walkdown Checklist (SWC) I..

Equipment ID No. IET-XD Equip. Class' 4 (Transformers)

Equipment Descriptioni 4 160/600 VAC Transformer Interaction Effects

7. Are soft targets free from impact by nearby equipment or struclures? YJE ND UD N/AO

8. Are overhead equipment, distribution systems, ceiling tiles and lighting, YZ ND UD-- N/AD and masonry block walls not likely to collapse onto the equipment?

9. Do attached lines have adequate flexibility to avoid damage? YED ND UD N/AD

10. Based on the above seismic interaction evaluations, is equipment free YN NE UD of potentially adverse seismic interaction effects?

(.,* ,

Other Adverse Conditions

11. Have you looked for and found no other seismic conditions that could YZ ND UD adversely affect the safety functions of the equipment?

Comments (Additional pages may be added as necessary)

Noted one cable tray support (rigid)has only X" clearance from large steel box attachedto South end of transformer.This is acceptable because both items are rigid and Y1/4' gap will prevent any seismic interaction.

Evaluated by: Thomas R Leitch "7" If Date: 11/01/2012 Ravn-ond CFuno~~i< ~jz~- 1/ / 2~'/2.

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 104 of 105

Sheet 3 Of 3 Status: Y,7-.N[ Ur-Seismic Walkdown Checklist (SWC)

Equipment ID No. IETXD Equip. Class' 4 (Transformers)

Equipmeni Description 4760/600 VAC Transformer Photographs Photographs Note: No photographs. Note:

Note: Note:

CNC-1206.03-00-0203 Rev 1 Attachment 7A Page 105 of 105