ML19038A097: Difference between revisions
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
StriderTol (talk | contribs) (Created page by program invented by StriderTol) |
||
| Line 3: | Line 3: | ||
| issue date = 02/05/2019 | | issue date = 02/05/2019 | ||
| title = Enclosure 1: Safety Evaluation Report (Letter to P. Noss Revision 7 of the Certificate of Compliance No. 9341 for the Model No. Brr Package) | | title = Enclosure 1: Safety Evaluation Report (Letter to P. Noss Revision 7 of the Certificate of Compliance No. 9341 for the Model No. Brr Package) | ||
| author name = | | author name = Mckirgan J | ||
| author affiliation = NRC/NMSS/DSFM/SFLB | | author affiliation = NRC/NMSS/DSFM/SFLB | ||
| addressee name = Noss P | | addressee name = Noss P | ||
Revision as of 02:19, 12 July 2019
| ML19038A097 | |
| Person / Time | |
|---|---|
| Site: | 07109341 |
| Issue date: | 02/05/2019 |
| From: | John Mckirgan Spent Fuel Licensing Branch |
| To: | Noss P AREVA Federal Services |
| Devaser N | |
| Shared Package | |
| ML19038A093 | List: |
| References | |
| EPID L-2018-LLA-0028 | |
| Download: ML19038A097 (22) | |
Text
Code of Federal Regulations
Target Diameter Target Length Cladding Material Target Contents Pellet Size Maximum Activity Payload Quantity Total Activity Target Diameter Target Length Cladding Material Target Contents Pellet Size Maximum Activity Payload Quantity Total Activity
The isotope production target basket, target holders, outer shell, thermal shield, and impact limiter attachments are classified as [American Society of Mechnical Engineers]
ASME Code,Section III, Subsection NF [ASME Boiler and Pressure Vessel Code (the ASME Code)]. However, the outer shell is conservatively analyzed to the requirements of Subsection NB. The isotope production target basket and target holders are defined by NUREG/CR-3854 [Fabrication Criteria for Shipping Containers]", Table 1.1, as 'Other Safety', and consequently, are evaluated as NF, Class 1 components. For HAC, equivalent to Service Level D, ASME B&PV Code,Section III, Division 1, Appendix F is appropriate. To assure no reconfiguration under NCT and HAC occurs, an elastic analysis will be used.