ML042960469
| ML042960469 | |
| Person / Time | |
|---|---|
| Site: | Palo Verde  |
| Issue date: | 07/06/2004 |
| From: | Arizona Public Service Co |
| To: | Gody A, Straka D Arizona Public Service Co, Office of Nuclear Reactor Regulation, Division of Reactor Safety IV |
| References | |
| FOIA/PA-2004-0307 | |
| Download: ML042960469 (2) | |
Text
From:
<PBCUSTOD@apsc.com>
io:
<ATG@nrc.gov>, <DSTRAKA@apsc.com>
Date:
7/6/04 2:39PM
Subject:
RE: FW: Oil Lift Pump That statement came from Ricky Burge. In work mech. #2715799, he stated that the lift pumps are run for approx. 5 minutes. I've copied Ricky Burge in this, e-mail, so he can respond accordingly.
-Original Message--
Sent: Tuesday, July 06, 2004 12:24 PM To: Straka, Donald J(Z99942)
Cc: Mauldin, Carl D(Z99397); Withers, Douglas W(Z98444); Holmes, John J(Z98811); Taylor, James T(Z94098); Henry, Nance (Z17566); Custodio, Prudencio B(Z99694); Kesler, Steven L(Z55768); Powlikosky, Michael D(Z75655)
Subject:
Re: FW: Oil Lift Pump According to your procedure, you must run the lift pumps for at least 7 minutes. Your white paper stated they only are run for 5 minutes.... it appears operators have a 3 minute window..... does this sound right?
Tony
>>> <DSTRAKA@apsc.com> 07/06/04 01 :06PM >>>
Tony:
Enclosed is information on the RCP thermal overload settings.
There was a question should the RCP starting procedures have a CAUTION statement regarding the lift pumps: Procedure 400P-9RC01 section 3.7 cautions that the lift pump must be run 7 minutes prior to starting the RCP and follow on sections for starting RCPs (4.3.18 for example) also contain a step for starting each pump.
- Regards, Don Straka Senior Consultant - Regulatory Affairs dstraka@apsc.com phone: 623.393.5041 pager: 602.509.6240 mobile: 602.509.6240
> ---- Original Message--
> From:
Custodio, Prudencio B(Z99694)
> Sent:
Tuesday, July 06, 2004 10:28 AM
> To: Sahay, Prem P(Z83476); Withers, Douglas W(Z98444); Holmes, John
> J(Z98811); Kesler, Steven L(Z55768); Straka, Donald J(Z99942)
Subject:
Oil Lift Pump
> <<White Paper Oil Lift Pump.doc>>
> Prem,
> Here's my input.
> Thanks,
> Denny CC:
<DMAULDIN@apsc.com>, <DWITHERS@apsc.com>,
<JHOLME01 @apsc.com>, <JTAYLO01 @apsc.com>, <NHENRY01 @apsc.com>,
<SKESLER@apsc.com>, <Z75655@apsc.com>